Imaq is for cameras USB driver always available? He can not find on the Web site of NOR

Cannot find or-Imaq for cameras USB Driver.  Is it still available on the Web site of nor?

Thank you

Or here.

Andrey.

Tags: NI Hardware

Similar Questions

  • can not find on the web page hp H470 bluetooth driver for win 8.1

    can not find on the web page hp H470 bluetooth driver for win 8.1

    Downloaded the full software, stops and States that the h470 is installed and no problems were discovered. only allows a test page to print when connected by usb. show / not allow an option to install the bluetooth drivers. If I remove the usb key indicates that the h470 is not discovered even if I have a bluetooth installed in the Pavilion and the h470

  • Better question: is it ok for a video in an email that is not closed on the Web site of the door?

    We have a debate going to him and so I thought I would ask an outside entrance. We have a request for a video link in an e-mail message, the door but this video is available on our Web site with no door. I feel like if you can get it free online it should be free in the mail to keep consistency. The other point of view is that they probly does not notice that the video has not been closed online anyway so we have to try to get the additional information from them in e-mail.

    Are there best practices on this topic, or even what other companies are doing?

    Thank you

    Heather

    I would say that if I had to fill out a form to view our video and then later know I could have watched the video without having to fill out a form, I would be a little ticked off. My advice would be to have the same process, regardless of how the Viewer found the video.

  • HP laptop laptop 15-ay019tu: shortcuts keyboard and HUB USB 3.0 driver is missing, I can not find anywhere then please provide some suggest

    I tried to install drivers in my new pc and I almost did. But I can not find the driver HUB USB 3.0 (that is listed as "unknown device").

    Another problem in the function keys. They do not work. So I need to install the driver of access keys

    I have tried many on the internet until now, I can't able to find drivers for my computer so please suggest a useful site to download the two drivers.

    Hello:

    For the question USB 3, download, unzip and run the file setup.exe from the link below.

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

    See if installing this software gets the Fn keys to work.

    This package contains the HP System Event Utility, which allows the special function keys on the laptop to program models. For example, HP System Event Utility allows users to press the Fn + ESC keys to view system information. This package is provided for the supported models running a supported operating system.

    http://ftp.HP.com/pub/SoftPaq/sp76001-76500/sp76383.exe

  • How can I search for terms in Dreamweaver on my remote side not only local folders Web site?

    I'm trying to search for terms on my website in Dreamweaver. When I use the button "Find and replace", it seems fair to search only the local files folder. Is it possible to have the focus of the research on the remote side of the Web site, instead of just the local side?

    Not with Dreamweaver.

    You can use the function search (Ctrl + F) in your web browser. But it will not replace the terms found.

    Nancy O.

  • Disk 320 external HARD USB 2.0-2.5 "can not find the driver

    I recently bought a 320 GB 2.5 external HARD drive "USB 2.0, Alu - case and I have it in my laptop properly connected.
    But my laptop is saying that he must "install driver software" and then he said: "windows found driver software for your device."

    Is there anywhere that I can get the driver software?
    Or something simple that will do well?

    I'm on windows vista, if that's any help

    Thank you
    Sam x

    In most cases you don't need drivers for USB storage devices. Provide special software as tools of encryption or password where you might need some kind of driver?

    You can try and check if all windows updates are installed and connect it to a different USB port.
    Do other USB devices such as memory sticks work card?

    Just in case, test it with another computer.

  • SanDisk USB Flash Drive & Logitech Wireless Mouse can not find the driver

    I am running Windows XP on a Dell XPS laptop.  When I joined the SanDisk Cruzer Flash Drive or a mouse with Logitech M215 wireless computer detects it and tries to load a driver but just by saying no driver found.  I use other mice wireless and other readers flash without any problems.  I went on the Web from Logitech website and SanDisk and they both say no driver required.  I contacted Logitech and they said it's a matter of Microsoft's operating system.  Where can I get a driver to run both devices.  Also when I go to the hardware profile the other device has a yellow box? next to him.  I try to uninstall the driver and updated it but without success.  Still looking for a driver.  Where can I find the driver.  Help.

    Hello

    1. have you tried plugging it into different USB ports and check?

    2. did you try to use the same flash player and mouse on another computer and check if it works there?

    3. how exactly did you uninstall the driver and reinstall it?

    Connect the hardware (mouse and flash drive) and run the fixit tool in the following article.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    See also:

    Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
    http://support.Microsoft.com/kb/314634

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
    http://support.Microsoft.com/kb/925196

  • backup and restore on USB drive says successful but can't find the backup disk

    I use VISTA and every time I do a backup and he goes to a successful saysUSB drive.  When I look at the USB there is not backup.  Where at - it go?

    It becomes very frustrating and who have never received response I hope this time I get a.

    Thank you.

    Mary C.

    Hi Mary C.

    Check if the files are hidden in the USB.

    a. open Windows Explorer.

    b. double-click the USB and click on organize them top of the left page and select folder and search.

    c. click on the view tab and select Show hidden folders and files.

    d. click ok.

    Hope this information is useful.

  • need driver for my scanner hp scanjet 8250. Can not find mine

    I have lost my install CD.  Where can I find another so I can run my scanner.  I realize how old this is but he served well and do not want to replace it.  So if no thinking, please let me know.  Thank you

    Hello

    Start here http://www.HP.com/cposupport/Loc/ click on support and drivers > drivers and software. Put scanjet 8250 fieldwork and research.

    This should take you

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=214604&TaskID=135&prodTypeId=15179&prodSeriesId=214599&lang=en&cc=us

    Don

  • 7210 driver installed ok but can't find on the network

    Hello and thanks in advance for reading.

    I have an Officejet 7210.

    I used on a network before without any problem, but put in place years ago. Since I used it on a USB connection, but wanted to get on the network, we can print wireless.

    Currently it is wired to my router Linksys and I have assigned a static IP address of 192.168.1.148. This laptop is connected to the same wireless network, and from there I have no problem connecting to http://192.168.1.148 in a web browser to access the config and can also send a scan job through as well without any problems.

    However, I can't understand how to add this printer at all so I can send print jobs. I have no success adding.

    I use XP and installed HP multi-function products driver Bundle - Corporate only from this page. After that it extracted the files in the folder HP_WebRelease, I ran setup.exe it and he reportedly installed a bunch of stuff, but did not attempt to actually find the printer. When I tried to add the printer via the standard start > settings > printers and faxes, I can't recognize my printer on the network, and if I put http://192.168.1.148 in the URL field, it is not successful.

    I tried to uninstall all printer software HP of Add/Remove Programs, and then restart, then install this same company pilot beam once again, which had no effect.

    I then returned to the same page of the HP driver and tried to install the software/driver of basic function of HP . Same results with this one. But I do not think that I took the time to uninstall everything completely from the Group of companies.

    If someone could suggest my next step to get this object linked, I would really appreciate it!

    Thank you

    Mark in SF

    Mark,

    I think that you will need followi the instructions in the Readme file in the extracted directory. On XP, it should be here:

    C:\temp\HP_WebRelease\Setup\Enterprise\readme

    If you want to do a full manual installation, the sequence for XP:

    1. Click on the 'Start' button--> printers and fax machines.
    2. Under print jobs, click on "add a printer".
    3. Click 'Next' in the Add Printer Wizard window.
    4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
    5. Under Select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
    6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is enabled and configured. Click on the button "next".
    7. Under "Add Standard TCP/IP Printer Port" enter the IP address of the printer (normally I would put the name of the printer here, but you use a static IP address for the printer). Click 'Next' and then click 'Finish '.
    8. Now, select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
    9. Keep the existing driver and click "next".
    10. Add the name of print spooler, and then click "next".
    11. Click "next".
    12. Click "Next" and "Finish."
  • Left custom catalog location for assessable catalogues to all users and can not find catalog.pse13db

    I upgraded from PSE6 to PSE13.  PSE6 on my old computer and PSE13 on my new computer.  I did a backup of the catalog PSE6 on an external drive.  Then I restored the catalogue PSE6 to my external hard drive at a location on my new hard drive and made my conversion catalogue 13.  I got a new catalog name is-1 extension in the location custom in my Catalog Manager.  I then left the new catalogue - 1 "custom location" to "Catalogs available to all users" because I didn't know that he was wrong in this catalogue.  When I moved the catalog "Catalogs available to all users" I have lost my catalog.pse13db file.  He is no longer on my hard drive.  It was not on my external drive is (I thought it would be there but checked even when not).  Why my pse13db disappeared and where at - it go?  There must be somewhere on the closing and reopening of PSE13 I'm able to open my new catalog-1 'catalogues available to all users "?  I don't think I'd be able to do unless he has been pulling the catalog.pse13db?

    By default, the default location for the catalogues (available to all users) is a "hidden" in Windows Explorer folder. To be able to see the 'catalog.pse13db' file in the catalog folder, you must set Windows Explorer to show hidden folders and files.

    https://support.Microsoft.com/en-us/help/14201/Windows-show-hidden-files

  • no error code. Error installing updates for M - Office 2003 failed due to "can not find the folder that contains the MSI 11 PRO" my system is windows xp/pro SP3.

    This file is available for download?

    Hello Allen, welcome.

    I recommend to try this:

    1. click on START
    2. click on "Control Panel."
    3. double click on "Add/Remove Programs".
    4. Select "Office 2003" and click on replace {or} remove "."
    5 Select this option to repair the installation, and follow the installation wizard
    6. after the repair, restart your computer and then try to update Office

    Let us know what happens

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to install the printer hp f4280 Windows 7 Edition family driver 32-bit premium that I download from the Web site

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    I'm using windows 7 32 bit. trying to install the driver from the website... it finished downloading, but I can't open the file at all... There is this? is there a solution to this prob? Please answer to me regardg this problem as soon as possible. Thank you very much.

    • You have problems with programs: windows 7, can't install the printer hp f4280 driver
    • Error: the file could not be opened
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Try right click on the file > run as admin.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to / stationed there.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Drivers for Toshiba laptop are not listed on the Web site

    Hello

    I was wondering if anyone here knows where I can find drivers for

    Toshiba Satellite A100 PSAAKC

    The websites that I found online were specifically of many models, but not this one.
    I re-installed Windows XP and experiencing problems will be solved if I can download the drivers.

    Thank you

    M

    Hello

    Obviously you have a Canadian model of laptop. Please see the Toshiba Canada support under http://209.167.114.38/support/Download/ln_bymodel.asp page

    Here you can find the drivers you need.

    Good bye

  • I deleted my driver sigmatel audio and can not find the download of the update to fix

    I have a dell deminsion e310.  I run windows xp I had device audio sigmatel, but I erased by mistake it. I would like to what update or download I need to solve this problem

    Perhaps here:

    http://www.Dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverID=W293Y&FILEID=2731089240

    for future reference: http://www.dell.com/support/drivers/us/en/04

    K

Maybe you are looking for