IMAQ Segmentation VI

Similar Questions

• How to handle Monster pictures 30 K in iCloud photo library? Segment or archive, suggestions?

  Hi there-

  I managed to hang a new iPhone 7 now and want to put up, but I'm struggling under the weight of a photo 32 000 iCloud photo library. Yes, I know it's my fault - we had iPhones for years, I'm an accountant family and the taker of the photo, I take too many pictures, I save too many photos, I have teenage girls who take a LOT of pictures.

  SO I think they are in the library of iCloud.  When I'm on my phone with iOS 10, I see "All Photos" and the total is slightly less than 32K - BUT I don't really need TO see all 32,000?  In fact, I don't really want to?  I would like to know that they are saved in their original resolution, but never need access to all those who, on minutes notice: they took 10 years to build up!

  Can I 'archive' in iCloud library?  They segment somehow?

  I have 7 more than 256 GB iPhone memory - isn't a storage thing, it's just something exaggerated.  I'm considering a facility clean b/c I'm also about 1000 apps more than 10 years old.

  But once I sign in iCloud, I think that 30K pictures will come streaming back, right?

  Other info:

  -My use of Photos on my 6 current iPhone is about 40 GB

  -J' have 800 GB available on a 1 TB iCloud account

  -In my iCloud account, it says that my photo library ICloud is 97 GB

  -I don't have an unlimited Smugmug Pro with photo storage account (although I'm not really all 32K of these-there are many who are not guards).

  -J' I download Google Photos to try to save it, but there still 30 000 pictures to back up.

  -J' have a MacBook Air but (gulp) do not have upgraded the operating system to have Photos for Mac yet.

  I would really appreciate it here a road map to get out of this situation - or not "stack" putting them all on my 256 GB iPhone 7 more and just accumulating more!

  Thanks in advance for the help!

  AKC

  Why not only the photos in the photo library of iCloud?

• Manual lap (or segment) the pace and distance

  Is there a way (or will there be a way) to see tour distance and pace on the lookout for series 2? I want to set manual towers (or "segments") on trips and see my stats in real time, and not only in the application phone later. I've used this feature on my garmin all the time and it is very useful when the PACE work or attend training sessions. I also use strava, but I don't see either this function in their application.

  Hello

  To mark a segment (for example a tower) year running, double-tap the screen, then wait the segment summary appears in the display.

  More information:

  Work with your Apple Watch - Apple Support

• Video Comedy Central plays a segment then msg content will be back soon... and never does?

  When I try to watch complete shows available on the Comedy Central site, I don't get the full show. I get a msg that says that your content will be back soon... and the first segment, but it never returns. I use Windows 7. Do I need a plug-in or an update? If so, how to understand to what?

  Look at your Details of the system more to the right of your first assignment. That the extension is installed in Firefox you have posted here with.

  See this - https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons

• Marking clips as Favorites IN timeline segments?

  I know we can score selections of clips in the browser as Favorites.  And then create a list of keywords / project amongst these selects 'F'

  I find it very very slow.

  I like to browse clips in the timeline.  Just wheeled aligned segments I want and rock out to them until the next 'track' (arrow Alt Com upstairs).  X'cuse, I know that we have more titles... but up out of the main plot.  Once I get through a set of clips I delete all clips of scenario isn't the job offer and bring my selects down to the plot.  Or lasso just copy all the upper clips and bring them to another calendar (project).  And then start working with them.

  I wonder if there is a way to do this more effectively?  If I could choose "Favorites" in the story and translate them somehow to a new timeline project /... I know I can't.

  So perhaps I wonder if there is a more effective way to make selects IN the timeline?  Without the help of the browser?  Something I have not come across but in the tutorials.  Who all seem to promote the browser / Favorites method.

  All ears and curiosity...

  Ben

  I would use the keyword Editor:

  

  Entry/exit points in the desired clips mark then in the browser.  With the R button, you can easily drag a range or even leaving the toll range WE.

  Because a Section of Clip wanted in the first box to know all the shortcuts do you is now press 1 for each additional clip range control.

  To summarize the process is simple, select a clip - drag a range - control 1.

  Once this is done for all of the desired clips, select the event where clips and right click to create a new Smart Collection:

  

  Name it something like:

  

  Notice the icon is a flower looking thing which means that it is a Smart Collection.

  Double-click the Clip Wanted event and the filter window appears.

  Tell him to find only keywords then uncheck everything except wanted Clip Section.

  

  The browser displays only items that you previously selected by using the beaches or in & Out points with a keyword of wanted music video Section when 1 control was entered.

  Use Command-A to select all the clips and then press W to insert them into a cool timeline.

  This is how I could tackle the job.

  Al

• SVG segments visible but hidden by the system

  Hi, since version 13.0.0 event "on mouse over" on many segments do not work... FireBug for, do not select Widget

  This forum is not focused on the help of a web developer (someone may always know the answer to your question) so that you may have better luck looking at our Developer docs or ask a question on stackoverflow.com

• Screen goes black at random times, then returns into segments

  I have a MacBook Pro OS 10.11.4 2012. A couple of times in recent weeks, the screen went almost entirely black, with a couple of small yet visible segments. Then if I click in some areas, such as the area of the document I was working, he'll be back.

  Any thoughts on what is happening? Is it a warning that my monitor is about to nonsense?

  It certainly not a good sign.  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, make an appointment at an Apple store genius bar for a FREE evaluation.  Take a picture of the phenomenon, just in case the MBP has his car in front of the technicians of genius bar.

  Ciao.

• After upgrade to El Capitan, Python segmentation fault 11 after two commands are entered.

  2011 Macbook pro with Snow Leopard (8 MB RAM).  I upgraded to 10.11.4 and now interactive Python (2.7.2) is broken.   After you enter the two commands any (?), it crashes:

  Pauls-MacBook-Pro: ~ python $ paul

  Python 2.7.2 (v2.7.2:8527427914 has 2, June 11, 2011, 15:22:34)

  [GCC 4.2.1 (Apple Inc. build 5666) (point 3)] on darwin

  Type "help", "copyright", "credits" or "license" for more information.

  > > > x = 1

  > > > y = 2

  Segmentation fault: 11

  Pauls-MacBook-Pro: ~ paul$

  I saw the posts here and on StackOverflow, saying that this problem is corrected in python 2.7.6 but I have a few questions:

  one) because it is a problem for a few years, why not upgrade the El Capitan installs a new version of python (if I understand correctly, the El Capitan installation includes)?   :/   For example, instead of everyone made the upgrade (at least in some versions) with the problem individually?

  Given that I apparently must upgrade to python:

  (b) I saw mention of problems with the evolution of the system version of python.   Can I change the version of the system (my preference), for example. 2.7.11, or do I need to install a version for my personal use?

  (c) how DO I upgrad.e the version of the system, or install another version?

  Thank you

  It is not the system Python, which is the version 2.7.10. What you get from "which python"?

• Skype segmentation fault - 4.0.0.7 - r2

  Hello

  I've just updated my Skype Linux based on Gentoo for Skype - 4.0.0.7 - r2 of sources.

  Skype does not start after that little start up. I get the "segmentation fault" if I run it from the terminal. And get the tail the log like this:

  kernel: Skype [4569]: Segfault at 0807dc0d sp bfd4c720 error ip 3f 6 in Skype [8048000 + 19ba000]

  Then I reinstall it and working fine until a couple of starts. Then it will repeat.

  Y at - it an idea to fix it? Or should I just use for the old one version, that works so - so?

  Behavior very srtange Skype executable. It changes during execution. So, there is a decision (http://forum.xakep.ru/m_2657618/tm.htm):

  chmod w/opt/bin/skype

  or

  chmod w/usr/bin/skype

  Depending on your distribution.

• How to Segment LAN/WLAN with TimeCapsule and third party LAN

  Hello

  I have a bit of a delicate situation. I need to speed up my (W) LAN through segmentation and hope that many of you might be able to help here.

  Currently my TimeCapsule connects via its WAN for a FritzBox with DHCP port. 255.255.255.0 subnet / host 192.168.178.1 TC router is turned off (bridge mode). The TC creates a wireless network. The FritzBox connects to the ISP and a lot other customers outside the TimeCapsule.

  The first WLAN TimeCapsule is extended by a second TimeCapsule. A couple AppleTV and expresses the airport are connected in the scope wireless of the 2nd TimeCapsule but far out of reach for first time capsule. Apple network and FritzBox network clients need NOT communicate with each other. It will be even better if they were aware, because there are other AppleTV, printers, servers UPnP, stream movie, etc.

  Thus, the 2nd TimeCapsule acts as a 'bridge' for the internet.

  Now, I want to segment the LAN (W). The main reason is to reduce traffic. The two TimeCapsules to connect with a very low bandwidth, because there are a whole bunch of concrete between the two. Since then, there are a LOT of current traffic, customers and also the internet connection around my TimeCapsules is not responding to most of the time.

  Is it possible to segment the LAN (W) with my first TimeCapsule and create a LAN (W) dedicated?

  Thank you very much for your help!

  I think that you need good QoS or limitation if I read your message.

  Give me real numbers.

  What is the max download and upload becomes your Frtizbox? Many real world real... using ethernet for the Fritzy and anything else using the bandwidth.

  The first link to the TC1 on ethernet should be no problem... but the TC2 wireless link is probably give you mediocre results... and there is very little you can do about it... have you tried or considered using adapters EOP. (homeplug to the United States).

  If you take the link that will help you.

  Segment the network's not going help the problem that I see.

  What model is the Christopher? Is there a QoS limitation or even decent with the limitation of bandwidth?

  You can set IP alias or VLAN on that?

  What model is the TC?

• How to segment a network home security?

  My home network consists of an Airport Extreme and two base station Airport Express, run by my Mini OS X Server. I want to my network of the segment so that devices of questionable security (IP webcams, nest thermostat etc.) are separated from my primary devices (computers desktop computers laptops/iOS). I currently use my comments for wireless network, but I want to keep away them from this network as well. I'm curious to know what others have done and what might people for suggestions. I would stay with my Airport gear and maybe just add rather than replace. He's been solid as a rock for me... i realize account it has limits, however.

  Thanks for your suggestions!

  To actually segment a network or a business, you want hardware network that takes care of VLAN. Although the function 'Comments Networking' of Apple routers is a form of implementation VLAN, it is very simple.

  That being said, if you are serious about this type of network security, you need to change (at least, your 'main' router) to a non-Apple solution that supports the implementation of VLAN.

• How to save an imaq image starting from a continuous stream, like a snapshot

  Hello

  I spent hours trying to find a solution for this on the internet for what I think should be really simple:

  I have a camera that gives me a stream of images, which I show in a chart of the image.

  Now, when the user clicks a button 'save', I want that picture that was shown at the moment where the user was hit 'save' is recorded. However, the user is prompted for a file location and name, so some time passes between hitting 'save' and write the image to disk.

  Meanwhile, the new images will be at the position of the pointer in the image that I wanted to save.

  It is clear to me why this happens, but how about him?

  I tried to make a copy copy Imaq, but this will give me just a new pointer that is always related to the old.

  I tried to convert it to an array, the same effect.

  I also tried writing a queue that contains a single element that has a buffer of image. The queue was not in a loop (which of course would replace the picture there), but again, the queue also just seemed to save the position of the pointer, while creating a new blank image in advance and I copied the image that I want with Imaq copy in this image buffer.

  So, how to store the actual image (not pointer) in memory to save a few seconds later?

  Basically I want something similar to what does the 'snapshot' of the curve of the image function.

  Any ideas?

  Thank you very much!
  Philipp

  Hello

  Thank you very much.

  I consider your solution already, however, I thought it's kinda an overdose.

  For some reason any, I don't know, he now works as I wanted. See example below (really just, I always wanted a picture).

  The only difference from what I tried earlier, is that now I did not specify the data type and the size of the new image... do not know if this is the reason why it did not work.

  Uday thank you very much for your help!

  Philipp

  PS: How did you make the image you posted in your message visible? Mine is just a link.

• IMAQ draw pixel color?

  Hello

  I wonder what are the valid values for the 'pixel color"entry for the Draw.vi IMAQ. I use RGB32 (U32).

  I could not find information on this in the service of assistance of the VI or on the web. You can enter the values in the s 10,000, which clearly has an effect on the color.

  I expected separate R, G and B inputs and do not know how they combine.

  Thank you!

  The color value is six-digit hexadecimal representation of RGB values.

  -As the first two digits representing the hexadecimal value of R, and two digits to G and the last two for blue.

• Cannot find IMAQ functions: IMAQ in correlation, analysis of particles IMAQ able Studio 2015

  Hello.

  I wonder if someone is able to help me with my questions as I am a little confused with what packages are available for my intention. I use LabView 2015, .net 4.5 and Measurement Studio 2015 (for .net), Visual Studio 2013 update 5. For LabView, I installed IMAQ Vision Acquisition Software February 2015.

  After installing Measurement Studio and try its features, I am able to find functions like Savitzky-Golay LabView signal processing in Measurement Studio under the namespace NationalInstruments.Analysis.Enterprise in .NET.

  However, for functions of LabView IMAQ as convoluted IMAQ, IMAQ in correlation, analysis of particles IMAQ, I am unable to find corresponding calls Studio 2015 able. How can I get these functions?

  Thank you.

  Nevermind, I think I've found my own answer. Measurement Studio 2015 contains only the LabView functions that can be called in the c# language. However, if you need features IMAQ, you can buy NI Vision Development Kit. The kit only supports .net 3.5.

  For new projects, use the NI Vision OpenCV support.

• Highlight the option IMAQ Oval overlay

  Hello fellow programmers.

  I was wondering if someone could explain the following: why are there no draw option 'flagship' in IMAQ oval overlay, even if the overlay IMAQ rectangle has this option?

  No simple alternative workaround solution? I am move 3D and tries to display the color gradient based on these movements on a picture 2D for clarity. I could I think using a rectangle, but the shape of the ellipse suits me better...

  Thank you and best regards,

  K