IMEI on the rear case have 1 number that does not correspond with the *.
Hello
I checked my Imei on 5 and I noticed that on the back casing has 1 digit does not match one that shows up on * #06 #.
*#06#: **************
case back: *.
I check the imei number with: https://checkcoverage.apple.com/ , imei number on the * #06 # is correct.
Please tell me what might be wrong here.
Thank you.
< personal information under the direction of the host >
I have no idea what * # is #06. However, the back case can be changed (the warranty and do who knows what other damage). If the phone, that shows that the IMEI?
Tags: iPhone
Similar Questions
-
Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »
Which edition of Windows 7 is installed on the machine?
Which edition of Windows 7 you are trying to do an Express upgrade to?
Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.
---------------------
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.
However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
"The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »What should I do?Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I just uploaded a new site to an existing via filezilla domain. It worked great and my site is up, but I have a problem that does not show when he would be seen in the fake browser Adobe Catalyst. I have a logo in the left corner of the page master. In Muse, he shows that he is in the right place, and when I go to preview, is also in the right place. When I went to live with my Web site, it shows that the logo is off, to the left and not at all in the right place. Any ideas on what I can do to move this and stay in the right place. Everything I have on the master page is prominently in the live version.
Probably, you have a box or empty text box somewhere see this thread for the fix: Bug Muse | Graphics shift randomly, why?
-
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.
When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgradeAdditional resources:
-
I have a HP 3970 scanner that does not work with Win 7.
My new computer came with win 7 is installed. I have a HP 3970 flatbed scanner
It will not work with win 7. Before that I had win xp and the scanner worked fine.
How can I solve this problem?
Hello
It probably won't work because they don't have windows 7 drivers written for her by HP
HP has written drivers for their products non-microsoft
read the information about the available drivers below
You can try the vista drivers or contact HP or buy a new scanner
-
I have a program I want uninstal - I tried several times via the control panel with prosses uninstal - nothing helps... Any help would be appreciated...
Hello
You can try this program to uninstall
Try the FREE revouninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.html
-
Have 2 websites that does not fill the screen
My site of newspapers and websites foodnetwork now find Miss and in the middle of the screen... very hard to see. All the others are so far OK.
Check your zoom controls. Hold the
(Mac = Options) key, press; + (more) to enlarge - (less) reduce restore 0 (zero) -
Siri keeps trying to dial a number that does not exist
I ask Siri to call the iPhone to my wife and she asked me which of the two numbers, I. Problem is, there is only one number. I checked the Contacts on my Mac Pro, as well as on the iPhone. His only real number is listed. How can I me Siri to stop trying to call a non-existent number?
If you have not yet tried, reboot the iPhone, then try to Siri.
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
-
the key is a W7 starter upgrade to W7 Home premium. bought the Comet, unfortunately.
The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
What happens if I lose my product key?
If you lose your product key, you can return towww.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
orHere are four utilities, which can display your product keys if they are still there:
Belarc Advisor: http://www.belarc.com/free_download.html
(He did a good job of providing a wealth of information.)
Also: http://www.magicaljellybean.com/keyfinder.shtml
and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
--------------------
The next thing you need to do is to ensure that your data is backed up:
http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
-------------------
The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
If your computer is pre-installed with Windows 7:
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
-Samsung uses ESC on most of its systems
-HP use F9 on most of its systems
-Fujitsu uses F12 on most of its systems
-Acer use F12 on most of its systems, but often you need to go into BIOS to allow-Dell uses F12
In general, look at the screen during the POST for a tip for what is possible.
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
------------------------
If it was a store bought retail license:
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
--------------------
After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us----------------------
Redo the Express Upgrade:
Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
---------------
Go to reactivate the license again. -
What version of IDS 4235 does not correspond with the event viewer
Hello
I have an ID with S37 3.1 (3) and the Event Viewer 3.1 ID (1) S37.
I upgraded to version 3.1 S39 IDS (3) but, after downloading the IDS EV and respective signatures, EV IDS kept the latest version 1.0000 S37. I didn't sign up for the latest version of signatures S39 (3.1 (1) S39).
Can someone help explain this.
The S39 has been updated for emergency. In order to get out as quickly as possible the VEI update was not included.
This will be fixed with the update of the S40.
-
Request for the old data that does not correspond to new data within a given period
Hi all
The reports that I need to create one for all employees who were going from one Department to another within a given period. The way I ran this report in Reportsmith (taken from our old system) was to compare the dept field from the start date to the dept in the end date field and it gives me these associate who had moved. I had to do it this way b/c dept changes can occur using several different types of actions (change to Surv, promotion, etc.), none of them exclusive to only change dept. We now use Oracle HRMS and I need to create this report even with this system using SQL.
Does anyone know how to compare the data between two different dates and shoot those who do not match? Your help will be GREATLY appreciated!
Best regards,
Yasmin E. Alberto
HRIS analyst
[email protected]Hello
Here is an example of an INSERT statement that may be relevant to this issue:
INSERT INTO emp_action (empno, action_date, deptno) VALUES (7902, TO_DATE ('2009-06-18, 'YYYY-MM-DD'), 10);
If someone wants to help you, in doing anything more than guess, then that person probably will need create tables that are similar to yours (but much smaller).
To do this, they can issue instructions CREATE TABLE to the tables, the INSERT commands to fill (put data in) the tables.
The tables invloved in this problem are probably simple, so if I can see some INSERT statements, I can probably write instructions CREATE TABLE myself and save you the trouble.For more info on INSERT, see the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_9014.htm#sthref8944]
If you compare the deptno to a row of a table to the previous line, you can use the analytic LAG, something like this:
WITH got_prev_deptno AS ( SELECT empno , action_date , deptno , LAG (deptno) OVER ( PARTITION BY empno ORDER BY action_date ) AS prev_deptno FROM action_table ) SELECT * FROM got_prev_deptno WHERE deptno != prev_deptno AND action_date >= TO_DATE ('2009-01-0'1, 'YYYY-MM-DD') AND action_date < TO_DATE ('2009-03-01', 'YYYY-MM-DD') ;
Like all functions, the OFFSET is described in the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/index.htm#I].
Published by: Frank Kulash, June 18, 2009 11:53
Originally missed a few quotes. -
How an EIT available transfer a liability that does not have access to the assignment form?
I have a responsibility that does not have access to the professional assignment form. However, they need access to the information of the costing which is an additional Type of Information transfer. How can I give them this EIT without giving them the form of assignment and link the EIT to it?There is a Fastpath function which directly opens the assignment of additional information form.
You can add this function to the menu of the responsibility of the user and then also attach the EIT concerned to this responsibility.
Shailendra
-
After Update Firefox on all November 9, I lost the list of bookmarks that I had before and it could access it from my homepage. Now it does not appear there. When I followed the instructions on your mozillazine.org help page, it says to find a profile file that does not exist with this version.
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
-
provisiond data store space does not match with the space of the VMs
Hi guys,.
I have the particular phenomenon on my cVenter environment. Space brought into service on data warehouses does not correspond with the really used capacity of the virtual machines.
Details:
VCenter: VMware vCenter 6.0.0 3634793
ESXi: ESXi 5.5.0, 3568722
Storage: The Netapp Cluster Mode
NFS data warehousesVirtual machines allocate more space such as assigned. It could be 100% more space. There are no files that are responsible for this in the data store. We have allowed efficiency of storage which means on the Netapp deduplication.
In the opinion of vCenter - the data store has a provisiond about 1 TB space and really about 550 GB space (space of each unique virtual machine).You know this problem or something like that?
Best regards
Thanks for your replies, but it's a feature of Netapp called fractional reserve.
This reserved feature 0% or 100% of the space.
Has anyone experiences with the option of fractional reserve and volumes NFS for ESXi? What is the best value for this?
Romano
Maybe you are looking for
-
sharing of a movie in a file on my desktop
Why can't I transfer my film in a file on my desktop. There is no indication in the small circle on top and the motor seems to run hard. It worked the last time in October 2015. What should I do? Thank you Linda
-
Game Center still does not work on the iphone 6?
Since IOS game Center 9 didn't work on my iPhone when 6 is it fixed or how to fix it?
-
Pavilion dv4-2145dx: bios administrator password
Disable System [10494244]Help, please!
-
Hello I have a little problem. Recently, I have increased my internet speed, 200 MB, but do a speedtest never go beyond the 95/99 MB. If I connect a PC directly to the modem provider, I get to 200 MB. It will take a special configuration in the Cisco
-
Take the backup of the user database using oracle forms 6i
I need backup user database using oracle forms 6i. Is this possible?