IMP/exp utility will not work

Similar Questions

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• LaserJet 1018 will not work on windows 7

  I have a HP Laserjet 1018 which works fine on Windows Vista 64 - bit.  I just built a new PC and put Windows 7 Home Premium 64 - bit on it.  The drivers on the HP support site will not work.  When I try to print something, it is sent to the printer and disappears.  I interrupt printing that document actually get sent to the printer and it appears.  As soon as I have some Nations United-pause the printer, the document disappears, but nothing prints.  Normally, when something is sent to the printer, the "information" LED yellow lights up momentarily and prints the document.  The led does not at all.  I tried new cables, uninstalling and reinstalling etc.  Nothing works.  Just to be sure this isn't a printing problem general, I connected a Laserjet 1020 on the new machine and it works fine.  However, it is my printer to work and I can't leave it on the new computer, which is a personal computer for my home.  It worked to identify that my copy of Windows 7 allows you to print, but is not a long-term solution.  Help?

  Hello

  Thanks for the post.  On this one, I have some ideas.  I pasted the links below.  One is for the driver Win7/64 page and the print diagnostic utility.  I would certainly recommend the utility to narrow down the issue.  The other is a related document in queue which contains excellent information.  Good luck!

  http://support.HP.com/us-en/document/c02239404

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1814094#n190

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• The installation of Vista Edition family program Premium 64 bit does not work and CleanUp Utility does not work.

  Whenever I try to install or to uninstall or upgrade programs even I can't do so until the Windows Installer will not work.  I downloaded the cleanup utility and it will not run.  It stops with "internal error 2908" and if I continuously press the OK key it will then stop the installation with "Error 1406".  It is really a nuisance and need to be repaired.  What can I do?

  Have you tried the logging option and if so did throw any light on the matter?

  Have you tried creating a new user and see if it is more likely?

  Looks like (for me) it's the access permissions problem that is behind all this?

  http://www.Google.com/search?q=%22internal+Error+2908%22&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

  http://www.Google.com/search?hl=en&RLS=com.Microsoft%3Aen-au&q=%22error+1406%22++&btnG=search&AQ=f&OQ=&AQI=G10

  Here is a small tool that you could look to see what's happening under the hood.

  Process Monitor v2.7
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/processmonitor.mspx

  Have you tried system restore earlier too?

  You could just back up your data and then restore the machine at the factory as of the 1st day in the life of the machine.

• Panel of control/restore will not work

  The restoration of the utility program will not work.  He NPT will allow me to create a restore point or restore my computer to an earlier restore point.  Using windows 7 Home premium.

  Currently I have no restore points and I am unable to create an or the pc creates one.

  Hi Thomas,

  See the steps from the following thread and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/actually-solved-system-restore-0x81000203-error/80e0d15a-B9A7-4055-8FAA-6b8799ae7766

• Windows wireless usb AS TP Link TL - WN822N Utility does not work

  This device has been installed on this computer in December 2011 and was active until I removed the unit in February to move to another city.  I was then cable internet service. In June of this year, I rebooted my Windows 7 operating system.  Now, I am wanting to re - install the device on this computer... I can download the appropriate driver, Device Manager indicates which driver I use and works correctly.  What I have a problem with is the utility program for the device.  It loads, but won't work at all.  It is stuck in advanced mode and I need to get into the mode of the system to set up the wireless network. This utility has worked in December, but will not work now.  I had this problem if I use the disc that came with the device or if I download the utility from the manufacturer. The only thing I can think is that a Windows Update is at the origin of the problem, but I would have no way of knowing what update is the cause of the problem. If I knew, I could remove it. At this point, I could re - install Windows 7 Home Premium 64-bit and disable the updates.  Then add each individually and see if it interferes with the utility.  It's a hassle I would rather.  Does anyone have a solution for this mess? Thank you.

  Hello

  Try contacting the manufacturer of software/hardware for any download needed for the utility is running.

  Post that we bring to the status

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• My entertainment sainburys application will not work in AirPlay on iOS 9.3

  Entertainment sainburys app will not work in AirPlay I can watch a movie on my iPad, but can't listen to my TV through the air Apple TV device, I can see my iPad on screen and YouTube plays just this app is not working I am using iOS 9.3

  Some applications do not broadcast their content you are sure that your application won't, a lot of apps that provide movies or TV series you block using AirPlay.

• How can I recover my old firefox after I replaced it, it told me a new will not work?

  I was on my AOL Homepage and was encouraged to be upgraded for increased security. Everything went well, but when I tried to open Firefox, I learned it wouldn't work. Usually, with this older system, I am notified when an upgrade will not work. I would have never taken the lead and replaced my old if I knew. Is it possible to recover my old Firefox?

  There are apps that I have on this old system that does not work on newer systems. (I have an Airbook updated but I like the big screen for some things). I found this on Google:
  https://support.Mozilla.org/questions/970943
  Mozilla
  September 11, 2013 - where can I find older versions of Firefox, which runs on OSX 10.5? ... because Firefox 16 is the latest version of Firefox that works with Mac...
  and downloaded Firefox 16 of their link. It seems to work. For security reasons, I use my Airbook for bill payment, etc.
  Thanks for your comments. Thank you very much for the quick responses.

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.

• IPad will not sync with iTunes on my laptop. Synchronization in iPpod settings will not work

  MY iPad will not sync with iTunes on my laptop, the sync on my iPad button will not work. I have the latest updates on both.

  I guess you mean that the sync button in iTunes, not on the iPad, will not work. If you are sure you have the latest version of iTunes and iOS (your profile shows 8.1) try quitting iTunes on the computer, restart the computer and force restart your iPad

  No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• How to import bookmarks multi-level IE 8 FireFox 17 if IE 8 is broken, cannot re - install and will not work?

  IE 8 is still installed, but will not work. I can not install any version of IE - I tried. I can import only first level bookmarks. Solutions in the forum assume IE 8 work.

  If you have problems with importing IE bookmarks in Firefox, then export favorites in Internet Explorer to a HTML file and import this file in the Firefox Bookmarks Manager.

  If you don't have the menu bar in Internet Explorer, and then right-click on the toolbar above to activate the menu bar.

  • Export Favorites in Internet Explorer to a file (bookmarks.html) HTML:
    File > import and export
  • Import HTML file in Firefox:
    Bookmarks > show all bookmarks > import and backup > import bookmarks HTML: file

  See "Import from another browser" and "import from file":

  • http://KB.mozillazine.org/Import_bookmarks

• Telstra Australia tell me that I have to use Chrome, as their facilities will not work with Firefox. Why?

  After spending literally hours trying to pay an account on Telstra Australia (that I just joined them, so it's the first installment), I finally gave up and contacted directly. I was told that Telstra services will not work with Firefox and that their preferred system is Google Chrome but Internet Explorer will not work.
  I have used Firefox for a long time and I'm happy with the program. Specifically, I have everything set up to work with Firefox and do not want to change. At the same time, I want to have the convenience of paying bills online.
  Can I load up, Google say, just one thing, or the program will then try to "catch" other functions as well?

  Yes, you can install Chrome and use it for a website. "Recovery" Chrome as other functions on your PC, just don't let it not be defined as "browser default" If you are prompted during the installation procedure. In addition, I doubt if you'll have a problem.