IMPDP with creating user

Similar Questions

• Need help with creating user hr

  Question

  To perform the requested operation, an error has occurred:

  ORA-01045: user HR has no privilege CREATE SESSION; connection refused

  01045 00000 - "user %s has no privilege CREATE SESSION; connection refused '.

  * Cause: A connection was attempted to a user name that does not

  create session privilege.

  * Action: Grant the CREATE SESSION from the user privilege.

  Code provider 1045

  SELECT * FROM DBA_SYS_PRIVS WHERE DEALER = "HR";
  No output

  SELECT * FROM DBA_ROLE_PRIVS WHERE DEALER = "HR";

  No output

  Finally did this:

  ALTER USER DEFAULT ROLE CONNECT HR;
  Again gives error

  ALTER USER DEFAULT ROLE HR CONNECT

  Error report-

  SQL error: ORA-01955: DEFAULT ROLE "CONNECT" not granted to the user

  01955 00000 - 'ROLE '%s' not granted to the user by DEFAULT'

  * Cause: Modified user does not have the specified role granted

  directly to the user.  Note that the secondary roles can be used in the

  default role clause.

  * Action: Grant the role to the user.

  In fact, it's delicate. The HR schema is installed for Oracle 12 c installation of database. However, it is locked or hidden. You must unblock with instructions as below.

  Select * from v$ PDB;

  Select name from v$ active_services where con_id = '3';

  change the container set session = pdborcl;

  ALTER database connectable to open;

  ALTER user identified by HR HR account unlock;

  Tutorial is here:

  https://www.YouTube.com/watch?v=iVo6Xnzeteg

• Problem with creating user Notifications / change user password

  Hello
  
  I'm having a problem send emails to users when an account is created in the IOM.
  
  I've added a notification to the user and Manager of the user on the task to create a user in the definition of user Xellerate process but emails are not sent.
  I know that if I create another task in order to send emails and call it through the answer in the task of creating a user, it will work.
  My purpose is to avoid adding tasks for something IOM should be able to OOTB.
  
  I'm also unable to send an email when a password is updated... I did the same thing for the user to create and I know that the task (change user password) is called by looking at newspapers, but emails are not being sent.
  
  Has anyone encountered this kind of problems?
  I'm having these problems in the task of user Xellerate process... I've added notifications to other process tasks (mostly tasks for approval) and that they are working correctly.
  
  
  Thanks in advance

  I ran into several question all about change the default behaviors of the user Xellerate object and the process. The Xellerate object and the process have additional built in secuity to prevent users from accedentily their spoil, so when you make changes as you try to do that they do not work. I have a few SRs open on this, because I have a customer who would like to have sent notifications when new users are created by IOM. As a work-around, I drive offshore the purpose of user AD resource notifications because each IOM user automatically gets an ad and Exchange account.

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• problem with "could not create ' users\locals1 ~ \Temp"-unzip operation cancelled. "

  When you try to install the Blackberry software, I get an error "could not create ' users\locals1 ~ \Temp"-unzip operation cancelled. " How can I fix it?  I am the only user, and I have administrator permissions.

  Try right click on the system icon and then click on run as administrator and see if that helps.

  (t which does not help and because the problem is the installation software Blackberry, pleaee transfer your question in the Forum program at the: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads , where programs other than Vista experts will be more than happy to help you with your problem.)  There may be a special procedure to install the Blackberry software that requires additional or different steps.

  I also suggest that you contact Blackberry technical support to see if they can help you - they must be very willing to help you (as they otherwise lose a sale, as you can return it for a refund if you do not it works properly).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to create a user local administrator with the user root on the CV

  As says the tile, how to create a user local administrator with the user root on VCS-Express. I lost the password and cannot log in as an admin user, but I can't seem to log as long as user root.

  Once connect you with the root account, type in "tsh", from there, you can create the accounts of local administrators with 'xCommand AdminAccountAdd.  See the reference section of command of the VCS Administrator's Guide, starting on pg 517.

  If your VCS is a virtual machine, you can change the password of admin with vSphere, or if it is a hardware appliance, you can use the serial port, see pg 312 of the Administrator's guide.

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• IOM 9.1.0.1:-create user with approval.

  Guru, Experts,
  
  I am currently using IOM 9.1.0.1, and I want to create the user features to be working with approval. Whenvr a user or xelsysadm attempts to create the user and it must then ask for approval/Rejact then only it will create or deny the operation.
  
  Thank you
  Hemant.

  (1) create a dummy resource, say 'CREATE the RESOURCE USER IOM'... It should be of type 'Order of the organization' and not 'Order for User. Create a model organization, such as CREATE USER ORGANIZATION or better ORGANIZATION OF USER OPERATIONS too for the sole purpose of acceptance of the application.

  In the form of resources either in the form of object, take all required attributes such as user login, first name, last name, organization etc.

  (2) establish an approval process: say "assign system Admin Approval '.

  (3) in the assignment tab, assign the task to the Group--> SYSTEM ADMINISTRATOR (or any other group of your business condition)

  Optionally, you can even send emails too.

  (4) in the process of commissioning, in the stream, flow, the shape of the object in your process.

  (5) in the "Create a user" task, call tcUserOperationsIntf.createUser () and pass all from processes form...

  (6) raises 'request '... Fill in the data... And then approve it... The user must be created...

  (7) in the CREATE USER ORGANIZATION profile resource, the IOM CREATE USER the RESOURCE and the process shape shows all the attributes of the user.

• Error ORA-20987 creating users with apex_util.create_user.

  Hello. I need to copy users from one summit to the other.
  
  @apex4 is a DBlink apex 4 initial installation, I need to create users on a new server apex4, where I am loged and run this script:
  
  
  declare
  users of cursor is
  Select *.
  of apex_040100.wwv_flow_fnd_user@apex4
  where user_name <>'ADMIN ';
  Start
  for you in a loop users
  (. Create_user) APEX_UTIL
  p_user_id = > u.user_id,.
  p_user_name = > u.user_name,
  p_first_name = > u.first_name,
  p_last_name = > u.last_name,
  p_description = > u.description,
  p_email_address = > u.email_address,
  p_web_password = > '1234'.
  p_web_password_format = > 'CLEAR_TEXT');
  end loop;
  end;
  
  I tried to connect with apex_public_user and sys as sysadmin, but I still get the same error:
  
  ORA-20987: APEX - unauthorized access (package for the undefined security group variable). -Contact your administrator of the application.
  ORA-06512: en "APEX_040100.WWV_FLOW_ERROR", line 704
  ORA-06512: en "APEX_040100.WWV_FLOW_ERROR", line 1008
  ORA-06512: en "APEX_040100.WWV_FLOW_FND_USER_API", line 24
  ORA-06512: en "APEX_040100.WWV_FLOW_FND_USER_API", line 617
  ORA-06512: en "APEX_040100.HTMLDB_UTIL", linea 1395
  ORA-06512: in linea 8
  
  Thanks in advance and sorry for my English.
  
  Published by: Andres Vilallave on 2012-ene-31 12:48
  
  Published by: Andres Vilallave on 31-ene-2012 12:49

  Hello

  When you run this code?
  If you run this code in SQL client like SQL * Plus or SQL Developer this post might help
  Re: installation of the runtime: how to create users?

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• problem of creating user with SYSTEM default tablespace

  Hi guru
  
  When I am creating the user with table space default 'SYSTEM' I get the following error message

   SQL> create user chetan
    2  indentified by c 
    3  default tablsespace SYSTEM
    4  temporary tablespace TEMP
    5  quota 20 m on SYSTEM
    6  password expire;
  indentified by c
  *
  ERROR at line 2:
  ORA-00922: missing or invalid option

  and when I change EXAMPLE its created as follows table space
  

   SQL> create user chetan
    2  identified by c
    3  default tablespace EXAMPLE
    4  temporary tablespace TEMP
    5  quota 15m on EXAMPLE
    6  password expire;
  
  User created.

  so my question is. Is it not possible to create a new user with systemtablesapce?
  
  
  Thanks in advance
  Chetan

  you have a typo on line 2:

   SQL> create user chetan
  2  indentified by c 
  

  identified ?

  so my question is. Is it not possible to create a new user with systemtablesapce?

  Yes, you can

  SQL> create user vivek identified by l default tablespace system
    2  ;
  
  User created.
  

• IOM Provisioning - OID Create User fails with a weird error

  Hello
  
  I have the auto layout installation service using access policies, the user is to created in IOM, then he's trying to delivery to the OID.
  
  I get the following error while trying to create the user in the OID. The "Create a user" task is rejected status with the error "Could not create user".
  
  
  DEBUG, December 6, 2010 14:07:33, 573, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: getMultiValues(): COMPLETED
  DEBUG, December 6, 2010 14:07:33, 574, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: escapeCharactersDN(): STARTED
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) generic Exception Exception:
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  
  DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. Election of OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) with the code: USER_CREATION_FAILED
  DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: disconnectLDAP(): STARTED
  
  
  
  I mentioned the following post:
  
  IOM - OID Direct Provisioning of users newly created via the err access policy
  
  Mistakes are similar, but it seems that in my case the container DN is updated using the adapters to prepopulate.
  
  Any ideas to fix it?
  
  Concerning
  Vijay Colin

  I would recommend to sniff the connection (http://iamreflections.blogspot.com/2010/08/how-i-learned-to-stop-worring-and-love.html) or decompile the connector.

  Newspapers are not very useful.

  Best regards
  / Martin

• Create users with permissions to read only a few dashboards

  Hi all
  
  Works with OBI EE, I created dashboards and I want to know the steps to create users in order to
  
  give each of them certain permissions (read-only, select or change). I just tried and I might add a new group of
  
  users, but I was not able to create a new user.
  
  To add a secure way to present my work, have more than one user (Administrator) would help me
  
  manage all dashboards and give each user the ability to view only the edge associated with its activity type.
  
  Any ideas...
  
  Kind regards.

  Hello

  For users to create and give certain permissions to them, please follow the steps mentioned below:

  1 > connect to Administration and open the RPD in online mode.
  2 > click on manage---> security
  3 > it will show a window which displays users, groups, etc.
  4 > select user.
  5 > on the side right window right click and select new user.
  6 > a window will appear where you must type the user name, the description, and the password, and then click ok
  7 > your user name is created. Now save the RPD.
  8 > connection to presentation Services with the user you just created. This will create the user in your presentation.
  9 > now logg off and connect with the administrator user.
  10 > now go into the settings---> Administration---> interactive dashboards to manage and give the permissions you want.

• Firefox 4 deployment with custom user settings?

  Hi people,

  I want to deploy FF 4.0 with custom user settings, but where is the "localized" my prefs.js file folder? In FF 3.6.x we extract the setup.exe file and with sources, we have deployed our customized firefox. In FF 4.0 now, there is some file missing from news sources. Are there any documents that explain the deployment of FF 4.0? Thank you very much

  You can always create a folder/defaults/profile and places the files in this folder to have in a new default profile. Folders that have no content are no longer present in the version of Firefox 4 RC, but some are still read and processed.

• You are about to open a session "keiron.me.uk" with the user name "Gerry" site, but the site requires no authentication. Maybe it's attempt to deceive you.

  http://Keiron.me.UK

  This very annoying message what I select my site

  You are about to log on the site "keiron.me.uk" with the user name "Gerry", but the site requires no authentication. Maybe it's attempt to deceive you.

  It is ok with Internet Explorer

  To resolve this problem, simply is to remove all bookmarks you have to keiron.me.uk and then re-create by vising the site by typing the address directly into the address bar.

  If you want to manually fix it then, check the properties of the location of all bookmarks that you have for keiron.me.uk. It is probably similar to http://keiron:[email protected] remove the keiron:password @ section and the dialog box should not appear again.