Import/export slides between projects

Similar Questions

• How do I sync and import/export bookmarks between different users on the same computer and two using the Firefox browser?

  All the help instructions are to import and export bookmarks bookmarks between different brands of browsers.

  Assuming that each of these different users use a different profile of Firefox. You can use the built in Fx4 Sync feature. Click on Setup Sync in the menu selections, create an account and then have each user created their profile to use this new account synchronization. It syncs more bookmarks; things like history, passwords, etc. So if it's only the bookmarks you are concerned with that, use customize only synchronize bookmarks when you set up each user. Good luck and have fun in sync.

• project import/export with child components

  We are at ODI 10.1.3.5. We exported again project with children DEV instance components and wanted to import the XML file that was exported in the TEST instance using the synonym INSERT mode. We have some of the interfaces whose names are identical in the different old project instances DEV and TEST. If import us the new XML project file in the TEST instance with synonym INSERT, it causes a problem? What is the best approach to deal with import/export between different instances when the object names are the same between projects? I would be grateful if someone responds with suggestions.
  
  Thanks in advance
  VK

  It is not really important that the names are the same. Each object in ODI is assigned a unique object ID and this is what is used when an import is performed in order to determine the measures taken in the repsitory of the target. As long as this ID does not match an ID that already exists in your target repository, then you will be ok if you use synonym insert, although I suggest using synonym Insert/Update. Part of the object ID is the ID of the repository that being exported from the origin, so as long as you repsitory unique ID across your environments (basic good practices), you should not type any important issue-based.

• Is it possible to import Powerpoint slides to a sensitive project?

  I want to create a sensitive project a Powerpoint file. After I created the responsive project in CP 8 and go to the Import menu to import Powerpoint slides, the option is grayed out. Is it not possible to import Powerpoint slides into a sensitive project?

  You cannot import PPT slides in a sensitive project.

• How better for import of movement 5 projects in Final Cut Pro

  I use for my projects:

  -Motion 5 (5.1.2)

  -Final Cut Pro X (10.1.4)

  -Compressor (4.1.3)

  -Mavericks OSX on a Macbook Pro 2 GHz and 8 GB RAM

  -The images that requires a lot of editing, green screen and the particle effects

  I had a question about what would be the best way to import Motion 5 sequences into a Final Cut Pro project?

  Specifically, I started using both programs as a hobby, and I learned how to post Motion projects in Final Cut Pro as a generator.

  However, as most of my work involves a broad green screen and the effects of particles of edition, all the sequences essentially have to go through Motion. (as I am skeptical of 'Tools' Final Cut Pro when I can do more with proposal anyway)

  So is the only way to import sequences of movement is made by a generator in Final Cut Pro?

  I feel like there should be (and it might, like why I'm curious) a less encumbering way to import video edited between the movement in addition to hundreds of generators in Final Cut Pro.

  Using the method of generator, it's what I do, and I was wondering if I missed somewhere where I can import media motion editing in Final Cut Pro.

  Thanks in advance for your time and help

  MMake the Motion of the project and export it as a video to use in the PCF file.

• Model import/export

  My client has a 4.0 (3) of the unit in operation. They will install 4.0 (4) and want to reuse their model information in the new system. Y at - it any possibility to import/export selectively items such as patterns to avoid work and possible errors involved in manual recess? As far as I see it, there is no, but I thought that I would try to find out. Thank you

  No, the backup and restore as dirt and FullDBImport/Export tools are 'all or nothing' back ups, you can just backup some objects and restore them on a server of the target unit. The connections between the different means of objects (i.e. models link to class of Service and call managers and schedules etc.) you can't easily just cart around them, by themselves. It's a little more complex than it looks.

• Import/Export

  Is it possible, inside of SQL Developer to save an import or export "specification", which is a collection of settings that you can reuse for the same operation over and over again? It would be something along the lines of a file of data pump setting. I am familiar with data pump (I don't want to move data between databases) and current export/import features and I have not seen anywhere.

  Whenever you cross an import or export operation will have to answer a lot (ok, some) of questions and it would be really nice if you could answer these questions, save your answers and then reuse/edit your answers until you get exactly what you want. I'm going through the procedure about 4 - 5 times on imports until I get just as it should and have to answer questions throughout each time.

  Don't get me wrong, I really appreciate the fact that import/export have been made relatively easy with tools SQL Developer provides. It just seems it is pretty trivial to save a group of settings and then call them back if you want to reuse.

  Anyone else experiencing the same thing? Maybe I'm just hurt.

  Sincerely curious.

  Earl

  We have added just this feature for imports in 4.1

  Click on the button 'save state' to save your import settings (an import from Excel or CSV)

  

  so the next time you perform an import-

  Click on the button "Restore"

  

  This file can also generate scripts to import using the SDCLI program (it's a command line for SQL interface Developer run formats, exports, imports, downloads of cloud, unit tests, etc.)

  Export - if you use the shopping cart to make your export, you can save the settings for this too.

• Ability to export an entire project for use on another device?

  I'm in half way through a project (with lots of pictures and always associated with him) on my PC at home, but I'm on to head out of country for several weeks.

  Is there a simple way to export the complete project for me to work on my laptop while traveling, please? (I can then re - import to my PC at home on my return)

  (I think as Lightroom where you can export a catalog to facilitate this)

  Thanks in advance.

  While you try to move your project from one computer to another?

  In this case, use the project archiver, under the file menu. It will move your project file and all of its multimedia files associated with a device to another.

• Template Import/Export using webcenter Portal Builder

  Hello world

  I use Jdeveloper version 11.1.1.7 with extension 11.1.1.8 Jdeveloper and Wenter Portal version 1.7

  I created a page template in the portal Builder. I am trying to download this workflow in my Jdeveoper using Webcenter Design spaces. I don't know what are the changes to the properties file

  Can someone explain to me what are all properties should be changed or amended/updated in the config.properties for import/export model of custom page of Portal Builder for Jdeveloper

  Thank you

  Ravi

  This link can help u

  Implementation of Oracle JDeveloper for WebCenter Portal Asset Development

  I'm also paste file config.prop mine for your reference.

  ----------------------------------------------------------------------------------------------------

  Properties of #My

  #CUSTOMER - all properties must be provided the eigenvalues

  #Fri Jul 30 00:00:00 PDT 2010

  # User inputs.

  # Enter the base directory where JDeveloper is installed.

  # For example:

  # On Windows, if JDeveloper is installed in the directory

  # C:\MYJDEV, enter the path as: C:\\MYJDEV

  # On Linux, if JDeveloper is installed in the directory/scratch/MYJDEV,.

  # Enter the path as: / scratch/mywork/MYJDEV

  # Note that the JDeveloper directory contains other folders such as jdeveloper.

  # wlserver_10.3, modules, and so on.

  JDeveloper.Install.Home.Directory=C:\\Oracle\\Middleware\\

  # Enter the executable wlst

  # For example:

  # On Windows, wlst.cmd

  # On Linux, wlst.sh

  #wlst.executable = wlst.cmd

  WLST. Executable = wlst.cmd

  # Enter the absolute path of the DesignWebCenterSpaces project.

  # For example:

  # On Windows, enter the path as:

  # extending.spaces.home.dir=C:\\JDeveloper\\mywork\\DesignWebCenterSpaces

  # On Linux, enter the path as:

  # extending.spaces.home.dir=/scratch/mywork/DesignWebCenterSpaces

  Extending.spaces.Home.dir=C:\\Users\\vinayk\\mywork\\DesignWebCenterSpaces

  # Enter the path for the executable ojdeploy

  # For example:

  # On Windows, enter the path as:

  # oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}\\jdeveloper\\jdev\\bin\\ojdeploy.exe

  # On Linux, enter the path as:

  # oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}/jdeveloper/jdev/bin/ojdeploy

  #oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}\\jdeveloper\\jdev\\bin\\ojdeploy.exe

  Oracle.JDeveloper.ojdeploy.Path=${JDeveloper.Install.Home.Directory}/JDeveloper/jdev/bin/ojdeploy

  # Enter the port number on which runs the Console of Administration of WLS.

  # The URL for the Administration Console contains the port number.

  # For example: http://myhost.com:7001 / console

  WLS.port = 7001

  # Enter the host computer on which the application of spaces is running and where

  # the custom shared library must be deployed.

  WLS. Host = WebCenter.Oracle.local

  # Enter the number of host and port on which runs the application of spaces

  # For example, if the application spaces runs to the: http://myhost.com:8888 / webcenter

  # wc.host = myhost.com, wc.port = 8888 and wc.protocol = http

  WC.port = 8888

  WC. Host = WebCenter.Oracle.local

  # Specify if spaces URL protocol is http or https.

  WC. Protocol = http

  # For reasons of security, information name and password for the administrator user

  # are stored in secure files.

  # Get the location of these files secure with your systems administrator

  # or run commands WLST to generate these files as follows:

  ##   1. Navigate to: WC_ORACLE_HOME/common/bin

  ##   2. Enter the command: wlst.sh

  ##   3. The WLST command prompt, connect to the Administration Server

  # for Oracle WebCenter:

  ##        connect('','', ':')

  # Where admin_user is the user name of the administrator, admin_pwd is

  # the administrator password, the host is the WebCenter instance and port is

  # the port of the Administration Server.

  ##  4. Run the following command to create a user configuration file and the key file

  # to a specified location:

  # storeUserConfig('', ')

  # Where userConfigFile is the name and location of the file that stores the information of the user

  # and userKeyFile is the name and location of the file store passwords.

  # For example:

  # storeUserConfig ("C: / myFiles/myuserconfigfile.secure ', 'C:/myFiles/myuserkeyfile.secure'")

  # For example:

  # On Windows, enter the path as:

  # wls.userkey=C:\\JDeveloper\\mywork\\ps1userkeyfile.secure

  # wls.userconfig=C:\\JDeveloper\\mywork\\ps1userconfigfile.secure

  # On Linux, enter the path as:

  # wls.userkey=/scratch/myfiles/ps1userkeyfile.secure

  # wls.userconfig=/scratch/myfiles/ps1userconfigfile.secure

  # Use the wls.userconfig property to set the path of the userConfigFile and

  # the wls.userkey property to set the path for the userKeyFile.

  WLS. Take is C:\\myFiles\\myuserkeyfile. Secure

  WLS. UserConfig is C:\\myFiles\\myuserconfigfile. Secure

  # Enter the target on which the shared library must be deployed.

  WLS. Target = WC_Spaces, adminserver

  # Enter the target on which the webcenter.ear file must be deployed.

  WLS. WebCenter.app.Target = WC_Spaces

  # Enter the name of the application of spaces (webcenter).

  # Get this information from your system administrator or the

  # WLS Administration Console as follows:

  ##    1. Connect to the Console of Administration of WLS.

  ##    2. Access deployments > webcenter > overview

  # Name of the application the poster here.

  WebCenter.app.Name = WebCenter

  # Use the restart.implementation.version.suffix property to override the following default value

  # Version number of implementation implementation of your shared library.

  # You can get the latest version of the implementation of your

  # system administrator or from the Console of Administration of WLS as follows:

  ##    1. Connect to the Console of Administration of WLS.

  ##    2. Access deployments > [your-shared-library-name] > overview

  # The version number displayed here. For example: 11.1.1.2.5

  # The current version of the implementation is the last number, i.e. 5 in this example.

  # The default implementation increments of 1 version whenever you rebuild

  # your shared library (using run the Ant Target > clean-Stadium).

  # You can restart to a higher value if necessary. For example, if the current value is

  11.1.1.2.20 # and you want the next new version to 11.1.1.2.41 rather than

  # 11.1.1.2.21, do it by resetting the property restart.implementation.version.suffix to 40.

  # Note:

  # The first time you run Run of Target Ant > clean-point, the manifestImpl.properties file

  # is created and the manifest.implementation.version property is set to

  # 11.1.1.2.1. This initial version number is derived from the default.implementation.version

  # in build.properties (11.1.1.2) and added to the property restart.implementation.version.suffix below.

  # For example, if the restart.implementation.version.suffix is set to 1, the initial report

  # manifest.implementation.version will be 11.1.1.2.1.

  # In later versions, the restart.implementation.version.suffix and the lastNumber property

  # in manifestImpl.properties are compared, and the largest of the two numbers is incremented by 1.

  # If, for some reason, the manifestImpl.properties file is deleted, the file is re-created the next time

  # run run the Ant Target > floors to clean and resets the version of the implementation by the

  # restart.implementation.version.suffix only (as if for the first time). For example, 11.1.1.2.1,

  # If restart.implementation.version.suffix = 1

  restart.implementation.version.suffix = 2

  restart.implementation.version.suffix.Ear = 2

  -----------------------------------------------------------

  You need to generate the secure file... See here in this link

  http://www.techartifact.com/blogs/2013/04/generate-the-secure-files-in-WebLogic-in-WebCenter-spaces-applicaton.html

• import/export page

  4.2, 12 c Oracle Linux Oracle APEX.

  I worked a request and had a problem.  I moved it to apex.oracle.com so that you, the experts could see my problem.  One of you did, THANK YOU, and now I want to go back the page assigned to my local workspace.  I tried to export the page and got a sql file on my local machine.  When I tried to import it, I got an error:

  This page has been exported from another application or application in the different workspace. Page cannot be installed in this application.

  
  

  Then I exported the application full apex.oracle.com (an abridged version of my original CD) and it imported successfully to my local workspace.  I then exported fixed a problem page, deleted the page of my original app (there were the same number of page) and I tried to import it.  I got the same error when importing.

  
  

  How to get the beautiful new and well functioning page again in my original application?
  

  HustlingHare wrote:

  4.2, 12 c Oracle Linux Oracle APEX.

  I worked a request and had a problem.  I moved it to apex.oracle.com so that you, the experts could see my problem.  One of you did, THANK YOU, and now I want to go back the page assigned to my local workspace.  I tried to export the page and got a sql file on my local machine.  When I tried to import it, I got an error:

  This page has been exported from another application or application in the different workspace. Page cannot be installed in this application.

  Then I exported the application full apex.oracle.com (an abridged version of my original CD) and it imported successfully to my local workspace.  I then exported fixed a problem page, deleted the page of my original app (there were the same number of page) and I tried to import it.  I got the same error when importing.

  How to get the beautiful new and well functioning page again in my original application?

  Page level import/export using the App Builder is possible between separate instances where the request and workspace have the same ID.

  It can be done in SQL * Plus, or using SQL Developer apex_application_install API, but generally it is easier to simply import the entire application and copy the page between applications. To a page in the application, select Create > new page as a copy, copy the apex.oracle.com application page.

• Site Recovery Manager - Import/Export of recovery Plans

  Hello world

  I have a few questions about SRM:

  1. what SRM version supports the export of stimulus packages to the formats xml, doc and html? Y at - it a Composite indicator advanced to do the same thing?

  2. is it possible to import script of stimulus plans?

  3. when the recovery plans reside? SRM DB or vCenter?

  4. is it possible to generate scripts an automatic failover on the disaster without administrator intervention? As in without clicking any button?

  5. is there any limitation to the distance between the site of production and recovery site, for synchronous and asynchronous?

  6. the SRM 5.5 is compatible with vSphere (5.1.2)?

  Thank you very much for your answers

  Kind regards

  Ritu

  Export of "No recovery plan" is available even in SRM 5.1 but it cannot be imported back so that it is not repeated import/export plan that you expect. I expect the same year. Export of the stages of recovery plan is good for the documentation of DR but not for PR backup and restore.

  To be honest I don't have a hands-on experience with 5.5 but I don't see anything about importing in the documentation so I expect same behavior as in 5.1.

  Just my $0.2

• Can collections/items be shared between projects?

  Can collections/items be shared between projects?

  Lol the ability to copy items/collections/cards and layouts is on the backlog of product but shared items between projects is currently not in the plans. Can you provide a use case and importance?

• Captivate 8: PDF export created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  In Adobe Captivate, there is a 'PDF export' checkbox when you publish your project.

  He checked the box, and the publication of project created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  No, it was published in an interactive PDF, has always been the case. It's another way to publish the video, that does not need to deploy it to an LMS or a Web server, you can send the PDF file. However, since Flash player is is more integrated in later versions of the Adobe Reader software, the user is to install it.

• UDVs sharing between projects

  I searched for a way to copy a series of UDVs from one project to another, but have so far been in vain. I know RH10 does not offer an option to import/export for UDVs (why?), but I thought I'd be able to manually update the rhvariable.apj file to do the job. The problem is that RH10 seems to disregard these manual updates, place returning to the UDVs that were in effect when the project was the last came out.

  If RH10 isn't really reading the values in the rhvariable.apj file when a project is launched, where is it get its information from UDV of?

  Just a guess but have you tried to copy the rhvariable and the removal of PCD until you reopen the project?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Format of the clips that will be used to export the largest project.

  At the time of PE2, I used to capture and cut a clip and "export movie" which resulted in an "DV - AVI.  This is what I understood "loved" EP and the best format to use for the import of a larger project (and it worked well every time).  Now, in PE11, I don't see this option.  This method is useful, not only to cut the stuff you don't want, but naming clips to help with an id of content.  Which option should I use who maintains the quality and cooperates with EP better?

  BobSomr wrote:

  I'm on now, and there is no scrolling feature in the Panel "Publish + Share".  Not even on the right side of the Panel, which is already completely to the right.  What I see, it of web - DVD, disk, Online, computer and phone Mobile and players.  Where is my DV - AVI or "AVI with DV preset?

  By the way, I noticed the "file > export... ' is grayed out for the old way of doing this.  Is how important it?

  Click on 'computer '.  Then you can scroll to "AVI".  Then there is DV presets.

  Hope that helps.

  Bill S