Import of DVD - RW in first pro

Similar Questions

• The quality of the DVD ripped to first Pro CS5

  Hello

  My computer has decided to throw a tantrum and kill much of the layer source footage of my documentary - including the pro draft first of my documentary. (What we thought was a genius backup system did not help to keep a backup of our files!) Praise be to God, not long before that that tragic event of computer that's happened, I burned my movie to DVD with DVD Menu - done through callback.

  I would pull my documentary film on the DVD and in first. What is the best way to make that preserve the quality of the movie?

  That's what I tried:

  Ripped DVD on my desktop computer.

  Now I have a folder called VIDEO_TS on my hard drive.

  Inside this folder are the .vob files.

  I gathered in Premiere Pro .vob files - it worked successfully. But is this the best way to do what I want?

  Set up:

  Windows 7 64 bit

  Adobe Production Premium CS5

  Thank you in advance for your help!

  -Michelle

  Unfortunately, what you as the Source footage was converted into MPEG-2 DVD. There was compression. However, if you have no other choice, your method to import the VOB in your project, will be probably as good as it gets. At least you got the DVD-video.

  Good luck

  Hunt

• Import of video files in first Pro CC

  Hello

  I had this problem since I started using first Pro CC to edit movies ("literal as film ' The Social Network ') and the problem is the following:

  Every time I have import (converted from the mkv to mp4 format) movie file and read it in the power, audio, and video desync gradually. The first good minutes work, but then the sound starts playing before the coresponding video.

  I would really appreciate it if anyone has a solution to automatically synchronize the A / V in the whole movie.

  Thank you!

  Be sure to use a constant pace during the conversion. MP4.

• Problem with importing audio files .mts in first pro cc 2015 project

  When I play the video in preview the audio plays but does not appear when his sliding in the schedule of the project. I had not updated for first pro 2015 and tried and still no audio is displayed. I tried to remove the tray that the audio appears in and re import the images via the media browser and still no sound. I'm trying to start the final cut (after recording some new images in Cuba!) for a documentary that I worked on last year, so I would be very happy if someone could help me on this, its quite frustrating. Furthermore, I have imported .mts, pictures back in August for the same project and had no such problems. I use a 2012 end imac 3.2 ghz, 16 GB 1600 mhz

  Thanks in advance a mil!

  Charlie

  Probably forgot to patch source audio track.

  Adobe Premiere Pro help. Source patch and the targeting of the track

  

• DVD burned in first pro cc does not fill the screen. Desire a 4:3 aspect ratio

  I use first pro cc. I burned a dvd several times, trying different presets. Every time the dvd never fills the screen. It does not lool like box (16 x 9) letters. There is space around the photo / video. Need quick assistance, project is already late. Thanks in advance.

  Theo Smith

  Have you used one of the mpeg-2 DVD presets?

  Which one?

  MPE or Premiere Pro?

  Please show a screenshot of your output settings.

• How can I burn a dvd with adobe first pro cc?   I'm so irritated with Adobe to dry.

  Ive been working with the old-school adobe elements 10 several years first, burn DVDs without problem.

  I just got into Adobe Premiere Pro CC and I have no idea of how to burn a dvd?  I watched as 10 videos youtube to understand how... but yet, still have not seemed to find a reasonable way?

  Helpppp

  We use Encore CS6 version to burn a DVD

• Best way to import iPhone 4 video in first Pro CS5 - settings for the import of new "preset sequence?

  Shooting video with my iPhone 4 (ATT version) and try to import the file into Premiere Pro CS5 (5.0.3) running on Macintosh OS 10.6.6.

  The problem is that I am just guessing on how to import sequences, and the result is I'm getting artifacts of movement and generally lower quality.  I use iMovie 11 my basis for comparison.   Not surprisingly, iMovie 11 imports since iPhone beautifully, but when I looked around, inside the properties, there is not much to see.

  Go using Apple built in quicktime 'Inspector', it is possible to see this video of iPhone4 a result of properties:

  file ".mov".

  Dimensions: 1280 x 720

  codecs: H.264, AAC

  Color profile: HD (1-1-1)

  Audio channels: 1

  Total bit rate: 10 543

  AGENCY - PREDEFINED DESCRIPTION:

  < my comments sharp brackets >

  ????  = Question

  General

  Editing mode: DSLR < Correct?   Best I could do, perhaps it should be "Mobile Device" maybe it's okay >

  Time Base: 29.97 FPS

  Video settings

  Image size: 1280 h 720v (1.0000) < of "Inspector" apple quicktime window >

  Frame rate: 29.97 FPS < of "Inspector" apple quicktime window >

  Format of the pixels:?

  Fields: N?

  Audio settings

  Sampling frequency:?

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Mono tracks: 0

  Stereo tracks: 3

  5.1 titles: 0

  SUBMIX mono tracks: 0

  SUBMIX stereo tracks: 0

  5.1 submix tracks: 0

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.  (I'm not worried about the export for iPhone screen, concerning most of the information that I can find).

  Thanks in advance, Michael

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.

  You import it. that's all. First will (or should) use the file in native mode, so no need to do anything out of the ordinary.

  To create a sequence for it, simply one of the clips slide the button new item at the bottom of the project Panel. a new sequence will be created that matches the sequence. Edit now...

• What is the maximum number of images that you can import as a sequence in first Pro CC

  I do a lot of big engineering according to time is lapses that may include anything between 3 and 12 thousand images. When I import into Premiere Pro CC as a sequence - only about a 1/3 rd seem to be included in the imported sequence.

  Has anyone previously met and is it possible that I can work around the problem.

  Thanks in advance.

  OK... after having looked closely for files that are created by the GOPRO it would seem that the problem all by using the original sequential file names. I found that if I rename the files during import (Lightroom) to something simple like TL1, TL2.jpg etc, then I can import the entire sequence without any problem.

  Thanks to Shooternz and Jim for their suggestions.

• Could not import the flv file in first Pro CS6

  Hello

  I just tried to import into prime Pro CS6 but I get:

  "The file has a compression type not supported."

  I saw a post on a forum where someone changed the extension .avi and it worked for them.  Is not for me.

  I saw another post on this forum for Media Encoder allows you to change the file type.  When I try to import into Media Encoder I get "the compression of source type is not supported."

  We use a webcam to record and wants to do the FLV format because if the computer dies, he saves the file at this point where other formats is not the person who made the recording (at least this is what he told me).

  Any suggestions are welcome.

  Suz

  Covert with Handbrake:

  Convert with the brake hand

• How can I import cinema dng files in first Pro CC?

  Hello

  I want to use files RAW DNG of Blackmagic cinema 4 k for my first productions. As specified by Adobe this schould be no problem.

  When I import the dng file or a list of *.dng files, they are displayed in Active mode as unique photos. How can I create a video track on these lots of 'photo' in the window of the sequence?

  Many thanks in advance for any help!

  Soon A peer

  When I import bmpcc cinema dng in the project Panel, they come as a single image sequence.

  Appropriate is to import via the media browser. Then, they come as the video icon.

  Unique setting is wrong with respect to first works fine, but I used them as video files for the month by inserting first picture on the 'new sequence' icon.

• How to import my dng files to first Pro CC?

  Help, please. All the information I found dates back to 2012. There is no resolution to this yet?

  Right now, you cannot import directly. But the new update of the first CC, which was supposed to be due this month, will allow you to import them. If you're in a hurry, the best bet would be to convert it to a format of proxy for editing and then add a link to them later.

• Why won´t LR CC import mp4 videos produced by first pro CC

  LR will stop just to import (mp4 h.264 codec).

  When I import chorus and close lightroom LR process does not complete.

  Closes in Lightroom, but the process is still active and I must kill him via the Task Manager.

  I could import the video files (well some of them) in an earlier version of LR, but not now.

  It is too asked that LR supports the most common video formats?

  It helped in my case:

  https://helpx.Adobe.com/Lightroom/KB/error--sequencer-defunct--when-switching-to-Slideshow - module.html

• Import of images still in first Pro CS5

  I have a few digital photo images in my computer I want to use for a class project.

  The problem I find, is that when I import the images they are too big and only a part of the shows.

  Apparently the image size must be 720 x 480 high seas.

  How do I resize this scale?

  Help, please.

  Go to Edit/preferences/general and make sure that "default scale to the size of the image" is checked and then click OK. Then reimport the photos.

• Corresponding image shrinks when imported in first Pro CC

  Hello everyone

  I'll have to import. EPS image in first Pro CC in a way that fits the frame size of 1920 x 1090.

  I resized the image 1920 x 1080 in Photoshop to keep the same coefficient of W x H,

  but when you move the image tab more media on the Panel of a calendar browser, the image size is reduced by more than half.

  I tried dragging the handle toward the outside of the image in the program monitor, but the image would not extend.

  If you know how to resize an image in the program monitor, please provide the steps.

  Thanks as always

  The format of the pixels in your image that you create in Photoshop must be square Pixels.

  One way to fix it first:

  Click the image on the timeline to select, will the Panel effects and whirlpool open the commands for the query by clicking on the triangle next to the name, then swirl open orders for scale. Uncheck the uniform scale and adjust the width of the scale in order to fill the frame.

  

  MtD

• Branden DVD in first Pro CC

  Hoe kan ik een DVD branden in first Pro CC

  You must install the CS6 first and then again CS6 is included. CS6 first can then be uninstalled if you wish, again leaving CS6 on the system (with your first (CC).

  See this link - https://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html

  Thank you

  Jeff Pulera

  Safe Harbor computers