Import of service configurations developed in Interface Web OSB workshop

Similar Questions

• How to access the interface web web services test

  I'm running my server 10.3 in test mode. How can I access the web test for my web service interface?
  I can see the wsdl, but I can't access the test interface as in previous versions.
  
  Thank you

  Click in the table of your Web Service deployment.

  Scroll down to the section modules and components. Here, you should see a tree that contains Web Services.

  Click your web service

  Click on the test tab

  Open the tree and here, you should see the link to test client.

  If you have the location of the WSDL file, you can also add: http://adminserverhostname:7001 / wls_utc /? wsdlUrl = forward, for example,

  http://adminserverhostname:7001/wls_utc/?wsdlUrl=http://serverhostname:port/CompanyWebService/CompanyService?WSDL
  

  in what http://serverhostname:port/CompanyWebService/CompanyService? WSDL is the location of the WSDL file

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• Oracle 11.5.10 Configurator developer

  Hello
  
  Can anyone share the link to download the Oracle Configurator Developer Desktop version 11.5.10 installation?
  
  Thanks in advance!
  
  / Anupam

  You need only the client/desktop version of Configurator Developer to create and manage user 11.5.9 DHTML - style interfaces.

  Starting with 11.5.10, any model structure, rules and interfaces can be created using a web application. Just to give you the responsibility of "Oracle Configurator administrator", and you will be in the application Developer Configurator.

  If you work with 11.5.9 DHTML UIS, then you will need to use the client. The client is available for download from the Oracle Web site. The following note of the 'configurator Patch Matrix' to find the right patch to download:

  https://support.Oracle.com/CSP/main/article?cmd=show&type=not&ID=131088.1#22-builds

  Find out which version of the runtime Oracle Configurator, you use by running the following URL:

  http://hostname:PortNum / OA_HTML/Configurator/UiServlet? test = version

  This will return your current version of the configurator. Return to the metalink note and look for the column 'no. Build. " For example, if you use the runtime version 25-43 Configurator, you would then download the patch 7189809 to get the generation 25 - 40A of the VB developer.

  Thank you
  Jason

• Could not load the interface Web VMware Server 2

  Hello

  It seems that there have been a number of users has a problem similar to mine. Unfortunately so far it seems not be an easy fix. A few weeks ago, I downloaded VMware Server 2.0.2 and installed on my Ubuntu 8.04 Server. Surprisingly, it worked very well and I set up a virtual machine via the web interface. It took 3 weeks later I started having problems. Or, when I tried to access the web interface through the browser page just came not upward or it came I have connected, but then was then put on the door.

  Initially, I have done the following but doesn't seem to help.

  -Reboot the system

  -Restart all vmware services

  -Delete all cookies and cache.

  Then I thought that this question had to do with the process of webaccess. It seems that the process was not because for a very short period of time, the connection appeared and I was able to connect. But after a short period of time, it displays an error and then the connection was unreachable again.

  I checked the port 8308 below:

  netstat - LNP | grep: 8308

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 5754/webAccess

  Here is the response from audit ipv6:

  netstat - LNP | grep tcp6

  ping6-c1 localhost

  Unknown host

  I disabled it by changing of ipv6 on off in the etc/modprobe.d/aliases.

  My hosts file resembles the following:

  127.0.0.1 localhost

  127.0.1.1 web web.cinci.rr.com

  The following lines are desirable for the hosts with IPv6 support

  : 1 localhost ip6 ip6-loopback

  FE00::0 ip6-localnet

  FF00::0 ip6-mcastprefix

  FF02::1 ip6-allnodes

  FF02::2 ip6-allrouters

  FF02::3 ip6-allhosts

  I have attached the file proxy.log. I saw a few exceptions so don't know if this has to do with the problem.

  Also, I've included the hostd.log (it's in a zip archive because there are a few files of newspapers spend). I have

  Finally, I checked all the active internet connections and sockets. The results are below:

  Connections Internet active (only servers)

  Name of Proto Recv-Q Send-Q address foreign address State PID/program Local

  TCP 0 0 127.0.0.1:8005 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 6888/vmware-authdla

  TCP 0 0 0.0.0.0:8009 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:8333 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:23 0.0.0.0: * LISTEN 4421/sshd

  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 0.0.0.0:8222 0.0.0.0: * LISTEN 6994/vmware-pass

  UDP 0 0 0.0.0.0:68 0.0.0.0: * 4393/dhclient3

  brute 0 0 0.0.0.0:1 0.0.0.0: * 7 6634/vmnet-natd(8)

  UNIX domain sockets active (only servers)

  Proto RefCnt flags Type State I-node PID/name path of the program

  UNIX 2 BDRM STREAM LISTEN 16158 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfc-fd

  UNIX 2 BDRM STREAM LISTEN 16165 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfcssl-fd

  UNIX 2 BDRM STREAM LISTEN 16167 6994/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 BDRM STREAM LISTEN 16189 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/hostd-vmdb-fd

  UNIX 2 BDRM STREAM LISTEN 16191 6994/vmware-pass/var/run/vmware/proxy-mob

  UNIX 2 BDRM STREAM LISTEN 15714 6634/vmnet-natd(8) /var/run/vmnat.6634

  UNIX 2 BDRM STREAM LISTEN 11895 4940/python /var/run/fail2ban/fail2ban.sock

  Finally, just to try to "start over". I removed VMware Server system and reinstalled. Since the virtual machine is in a separate Directory I thought I had nothing to lose. Removal and resettlement seem to succeed. After a reboot and an attempt to access the interface web it STILL didn't work. I'm really at a loss right now. Any help would be much appreciated.

  Thank you

  Aaron

  Hello

  Welcome to

  Don't forget to give my answer. It is the way to give users of vmware communities who helps others.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• How to configure Firefox to autmotically Web page refreshes?

  How can I configure Firefox to autmotically Web page refreshes?

  This has happened

  Each time Firefox opened

  Is a day using Firefox

  Use this add-on, ReloadEvery: https://addons.mozilla.org/en-US/firefox/addon/115/

  Its functionality is accessible from the page's context menu (right-click anywhere on a page).

  If this isn't what you mean, please provide details.

• Configuration of several interfaces vlan on a layer 3 switch

  I am trying to incorporate a layer 3 switch in a network. (see figure 1 below). My problem is that in the configuration below, the layer 3 switch seems to offer no additional benefit on a layer 2 switch, because it does not pass packets from Layer 3, instead, it will take an additional router configuration.

  If I set up 2 interfaces like no switchports (diagram2) and create virtual interfaces on the switch of level 3, that is to say 0.1/g0, g0/0.2, 0.3/g0, g0/1.1,g0/1.2, g0/1.3, configure dot1q encapsulation and add ip addresses and subnets on each interface, so I understand that I can use the switch of level 3 as a router.

  However this introduces a new problem now, VLAN 1 is on both interfaces, so devices in VLAN 1 on each interface will have point to the default gateway on this specific interface and features of VLAN 1 on G0/0.1 interface must be configured with a different subnet than those on G0/1.1 interface.

  It does not seem logical, am I missing something?

  Assignment.jpg

  

  Figure 1

  assignment2.jpg

  

  Paul

  On a L3 switch you do not configure subinterfaces (usually).

  You create what's called Lass (Switched Virtual Interfaces) instead of this, and what are your L3 interfaces.

  If your L3 switch ports are ports of L2 or other trunks or assigned to a VLAN specific.

  For each VLAN you want to route you create then a SVI IE. -

  int vlan
  IP x.x.x.x
  No tap

  and the default gateway for clients in this vlan is the IP assigned to the SVI.

  Any other configuration of L3 interface, you add to the SVI.

  The only time wherever you actually use the ports of L3 is when you connect to a router for example.

  Jon

• ACS - 4.1 - does not display Radius (Nortel) in the configuration of the Interface

  We have a GBA running on Windows we can see the Radius (Nortel) option in the Configuration of the Interface.

  Anyone deal with this issue?

  It's probably because you don't have any AAA devices configured for RADIUS (Nortel). IF you set one, it will appear in the configuration of the interface

  Nicolas

  ===

  Remember responses of the rate that you find useful

• services configured with type bad start

  My HP laptop with Win8.1 has got somehow configured wrong and things start type services just do not run good now.is there a directory of all services, what the startup type should be for each, and how to configure everything correctly? Van or someone tell me something what do I do a full system restore? Thank you

  Hello!

  Have a look here: http://www.blackviper.com/service-configurations/black-vipers-windows-8-1-service-configurations/

• Import a Service of puppets in the catalog has no

  Hello

  I'm currently following the below article to import a service of puppets in the catalogue of Application Director;

  http://pubs.VMware.com/AppDirector-6/index.jsp#com.VMware.appdirector6.using.doc/GUID-EE38F497-AC4B-43B3-89E5-233C892B2B5A.html

  I have created a user with the appropriate permissions (ROLE_CATALOG_ADMIN) and run the command "import-puppets-manifest - typeFilter ' ^ apache$""and get the error

  / usr/bin/Puppet resource_type research ' ^ apache$ '-make-as = json failed with exit code and as a result of exit 127

  Unhandled exception java.lang.RuntimeException: java.lang.RuntimeException: called orders has failed. See previous messages.

  I tried to simply run import-puppets-manifesto and the same error occurs. I am connected to the puppet master DPPA.

  
  

  I checked the/user/bin/directory (on the DPPA and Puppet Master servers) it is indicated in the error message and did not "puppet" in the directory, do not know if this is related.

  
  

  See you soon,.

  
  

  -Robert.
  

  I tried to specify the binary puppet in the CLI nothing helps. What I've done is copied the shortcut of the puppet of/usr/local/bin/in/usr/bin. After that, I could run the command successfully.

  Thank you!

• Values of elements not FOUND after restarting the service configurations

  Has anyone seen elsewhere deliver before, I have a VCO 4.2.1 build 555 and every time we're going to restart the service, configuration items in bulk he values

  That's before the reboot/restart

  

  After the reboot

  

  If I go manually set values and resave the configuration items are the items in the vcenter. The strange thing is 1 point most of the time. Sometimes, the DVS sometimes the resource pool. Can someone tell me where these settings are stored or what could be causing this issue? The VCO is installed on a windows 2008 R2, vcenter server that we are connected 5.0.1. Any help or pointers in the right direction are welcome.

  Thank you

  Sean

  This problem has been reported before: and there is a solution: http://communities.vmware.com/message/2049507#2049507

• Insert data to tabe in interface web oracle

  Hello.
  I created and inserted the data from my database using SQL more.
  all tables created sucsefully and I can see them YES.
  but all rows in tables shown empety (this means under the lines, the column is empety not 0).
  
  now how to check the data that I inserted in the tables? I can see them in YES? (web interface)

  is not anyway to see the data in the web interface (web console in EM)?

  Don't know what your problem is... in EM you choose schema tab, in "Data objects" you select Tables, and then select a schema, and you can see the list of tables: you choose a table and in Actions, you choose 'view data '. It does not work?

• XML Web services configuration problem

  WHEN RUNNING

  long value 500

  set pagesize 100

  XQUERY declare default element namespace " " http://xmlns.Oracle.com/xdb/xdbconfig.xsd "; "

  for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-liste/servlet [servlet-name = "orawsv"]

  return $doc

  I GOT AN ERROR

  Error from line 3 in order:

  Select column_value xmltable (' declare default element namespace "http://xmlns.oracle.com/xdb/xdbconfig.xsd"; "")

  for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-liste/servlet [servlet-name = "orawsv"]

  return $doc')

  Error in the command line: 4 column: 146

  Error report:

  SQL error: ORA-02000: lack of keyword COLUMNS

  02000 00000 - "missing %s keyword."

  Please help, I need configuration db xml

  Still, I get the same error I asked when I try to run the same script with sql developer.

  OK, you are using SQL Developer.

  Replace quotes simple quotes here:

  servlet-name = "orawsv".

  It should now work without error, but you end up with this:

  COLUMN_VALUE

  ----------------------

  (XMLTYPE)

  which is not very useful.

  So you should better use XMLTable first:

  SELECT xmlserialize (happy column_value)

  FROM XMLTable)

  XmlNamespaces (default 'http://xmlns.oracle.com/xdb/xdbconfig.xsd'),

  "for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-liste/servlet [servlet-name ="orawsv"].

  return $doc '

  ) ;

• Call COM components as a service Windows 7 (NOT A WEB SERVICE!) via LabVIEW

  First of all, what I'm trying to do is completely new terrority for me and I've looked everywhere, impossible to find a solution. I have reviewed the following resources and tried to get out but nothing helps:

  [1] ActiveX and LabVIEW
  http://www.NI.com/white-paper/2983/en

  [2] ActiveX and COM - part I
  http://www.NI.com/white-paper/2981/en

  [3] tutorial: Configure the node of the function of the library Call to call a Simple DLL
  https://decibel.NI.com/content/docs/doc-9069

  My problem is that I got a COM which was installed to run as a Windows 7 service, always running in the background (service.msc). So far, it seems only to be an intuition that you shoul dbe able to use:

  (A) ActiveX in LabVIEW to call the COM object by name or the .dll file.

  (B) call the .dll file of the service using the library function node call

  I see the COM running as a service if I (service.msc). I see also two .dll files associated with this service (they have the same base name as the service running). Let's say the service is called "TestService" then the other two .dll are called "TestServicePK.dll" and "TestServiceXY.dll." In test ActiveX and node library function call, I tried to call the two .dll files. When I tried the ActiveX method I get "the selected file is not a .NET, type library or executable automation assembly."

  Also COM binaries were made in C++, but if I understand well there should not be a problem at least for the library call feature.

  This seems to be a case of corner.

  Actually COM! = ActiveX!

  COM uses ActiveX to implements its objects and also to instantiate and control their but COM is simply a binary model of the API and some functions to control the instantiation and the lifecycle of objects COM, nothing else. The only way to access COM objects correctly (when no ActiveX type library is provided) is to have a C (++) compiler that can analyze the header files according to interface with the interface object methods. All ActiveX controls use COM to implement the interface calling of their objects, but also adds a type library in the DLL and a few other niceties such as the properties of the object. This type library describes how to match the properties and methods of the ActiveX for real virtual table COM interface pointers.

  LabVIEW lists this type library in order to be able to interface to the COM, Active X objects interface. A pure COM library is missing all these subtleties. If LabVIEW would be favourable to a COM interface node, its configuration should allow the configuration of all the things that describes the type library. This configuration would require a lot of manual configuration details, similar to what the library node call, only a magnitude more complex. If this is not really an option.

  If your server COM DLL does not an ActiveX type library interface, the only way to access it in LabVIEW must obtain such a type library as an external interface (not possible for all COM components) or to wrap the COM DLL server by a traditional DLL, which translates the methods standard COM exported C functions then that may be called by the node library call.

  Creating a library of types from a single COM DLL is more or less unfeasable. You should at least have the original IDL file that was used to create the interface com write a C (++) wrapper for your object COM is very probably the most practical approach, but will require some good C programming knowledge as well as experience handling COM objects in C code.

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.