How to access the interface web web services test

Similar Questions

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• To access the SOAP Web Services: running on Acrobat 9, but NOT Adobe Reader 9.

  Hi all

  I use webservice to fill the form control. It works fine in Acrobat 9, but when I open the form in Adobe Reader 9 his WORKS DO not. Its niether give no error or no respone. Adobe Reader need additional code to access/run web services or where I'm wrong? Help, please.

  Thank you.

  -

  Afonso

  Hi Anhinav,

  Because the reader is not 'extended' Web Services will not work on the drive.  They are, however, (as you noted) work in Acrobat, which is "extended".

  Web services to work in Reader, you will need to purchase the LiveCycle Reader Extensions.

  Hope that helps.

  Jay

• QT: How to access the HTTPS Web site?

  There are specialized libraries necessary to deploy to access websites https with QNetwork and Playbook?

  I always have error 6.

  Others also have problems with this?

  Have you tried to connect the signal of SSLErrors and see what error? If the error is not important, you can tell Qt to ignore the SSL error

  check this: http://doc.qt.nokia.com/4.7-snapshot/qnetworkaccessmanager.html#sslErrors

• Could not load the interface Web VMware Server 2

  Hello

  It seems that there have been a number of users has a problem similar to mine. Unfortunately so far it seems not be an easy fix. A few weeks ago, I downloaded VMware Server 2.0.2 and installed on my Ubuntu 8.04 Server. Surprisingly, it worked very well and I set up a virtual machine via the web interface. It took 3 weeks later I started having problems. Or, when I tried to access the web interface through the browser page just came not upward or it came I have connected, but then was then put on the door.

  Initially, I have done the following but doesn't seem to help.

  -Reboot the system

  -Restart all vmware services

  -Delete all cookies and cache.

  Then I thought that this question had to do with the process of webaccess. It seems that the process was not because for a very short period of time, the connection appeared and I was able to connect. But after a short period of time, it displays an error and then the connection was unreachable again.

  I checked the port 8308 below:

  netstat - LNP | grep: 8308

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 5754/webAccess

  Here is the response from audit ipv6:

  netstat - LNP | grep tcp6

  ping6-c1 localhost

  Unknown host

  I disabled it by changing of ipv6 on off in the etc/modprobe.d/aliases.

  My hosts file resembles the following:

  127.0.0.1 localhost

  127.0.1.1 web web.cinci.rr.com

  The following lines are desirable for the hosts with IPv6 support

  : 1 localhost ip6 ip6-loopback

  FE00::0 ip6-localnet

  FF00::0 ip6-mcastprefix

  FF02::1 ip6-allnodes

  FF02::2 ip6-allrouters

  FF02::3 ip6-allhosts

  I have attached the file proxy.log. I saw a few exceptions so don't know if this has to do with the problem.

  Also, I've included the hostd.log (it's in a zip archive because there are a few files of newspapers spend). I have

  Finally, I checked all the active internet connections and sockets. The results are below:

  Connections Internet active (only servers)

  Name of Proto Recv-Q Send-Q address foreign address State PID/program Local

  TCP 0 0 127.0.0.1:8005 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 6888/vmware-authdla

  TCP 0 0 0.0.0.0:8009 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:8333 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:23 0.0.0.0: * LISTEN 4421/sshd

  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 0.0.0.0:8222 0.0.0.0: * LISTEN 6994/vmware-pass

  UDP 0 0 0.0.0.0:68 0.0.0.0: * 4393/dhclient3

  brute 0 0 0.0.0.0:1 0.0.0.0: * 7 6634/vmnet-natd(8)

  UNIX domain sockets active (only servers)

  Proto RefCnt flags Type State I-node PID/name path of the program

  UNIX 2 BDRM STREAM LISTEN 16158 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfc-fd

  UNIX 2 BDRM STREAM LISTEN 16165 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfcssl-fd

  UNIX 2 BDRM STREAM LISTEN 16167 6994/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 BDRM STREAM LISTEN 16189 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/hostd-vmdb-fd

  UNIX 2 BDRM STREAM LISTEN 16191 6994/vmware-pass/var/run/vmware/proxy-mob

  UNIX 2 BDRM STREAM LISTEN 15714 6634/vmnet-natd(8) /var/run/vmnat.6634

  UNIX 2 BDRM STREAM LISTEN 11895 4940/python /var/run/fail2ban/fail2ban.sock

  Finally, just to try to "start over". I removed VMware Server system and reinstalled. Since the virtual machine is in a separate Directory I thought I had nothing to lose. Removal and resettlement seem to succeed. After a reboot and an attempt to access the interface web it STILL didn't work. I'm really at a loss right now. Any help would be much appreciated.

  Thank you

  Aaron

  Hello

  Welcome to

  Don't forget to give my answer. It is the way to give users of vmware communities who helps others.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• UTL_HTTP to call the RESTful web services

  I tried a few days to access a REST Web service and the response is an HTML element:

  Supported media not taken type > 10.4.16 415

  > the server refuses the request because the entity of the request is in a format not supported by the resource for the requested method.

  It works from the browser (Mozilla). And there is demand:

  https://xmlhub-test.xxx.xx/xmlhubws/jersey/SubmitMessage

  POST/xmlhubws/jersey / SubmitMessage HTTP/1.1

  Host: xmlhub - test.xxx.xx

  User-Agent: Mozilla/5.0 (Windows NT 5.2; rv:12.0) Gecko/20100101 Firefox/12.0

  Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8

  Accept-Language:-us, en; q = 0.5

  Accept-Encoding: gzip, deflate

  Connection: keep-alive

  Referer: https://Portal-test.xxx.XX/portal/page/Portal/xxx/extranet/opma_main/xxxx/wsclient-xmlhub.html

  Cookie: JSESSIONID = JjhpJTqKsRYFGCjL3QLV2GcYMJHLvLDVlBL5hyh5FN8K2qyb10PR!-621147356! 625535808; ObSSOCookie=s47sUDozSHzJ%2FarHPqrcaD5LkcFJXEmkuTQKr51UYXa3lZPjeNHKjzaUmxYbPxLkZYaaztIqCJwodlHpo6D4jR%2FVkKhmd%2Bcc9dJg4jw9cA3Kn%2FZxiwe3RA1Fyf2A%2BFLgy6eQStLzV6C9QbOi2lersS9gZBbYEy28etCXhPgMuOavl3Xtnf%2BeMVCj4Hg2QQxZSt%2FHjkSWRh%2FyVhDevt2yUo4zpoLTZ7ZKX28um6FO8CCXUTCvSlljWSzhzmSL9SwO;     RSERVER_XMLHUB_TEST_TCP_7012 = R1894177232

  Content-Type: multipart/form-data; Boundary = - 204562724022109

  Content-Length: 2607

  -204562724022109

  Content-Disposition: form-data; name = "content"; filename = "abc - 01.xml".

  Content-Type: text/xml

  <? XML version = "1.0" encoding = "UTF-8"? >

  ETC.

  and my code is:

  -UTL_HTTP. CLOSE_PERSISTENT_CONNS (g_wsdl_url);

  Utl_http.set_response_error_check (false);

  Utl_http.set_detailed_excp_support (true);

  Utl_http.set_cookie_support (true);

  Utl_http.set_transfer_timeout (60);

  Utl_http.set_follow_redirect (3);

  Utl_http.set_persistent_conn_support (true);

  UTL_HTTP. SET_WALLET (xxxx, xxxxx);

  v_http_request: = utl_http.begin_request ("https://xmlhub-test.xxx.xx/xmlhubws/jersey/SubmitMessage ', ' POST ',' HTTP/1.1 '");

  Utl_http.set_body_charset (' v_http_request, ' UTF-8 ');

  Utl_http.set_authentication (v_http_request, xxxx, xxxxxx, "basic", false);

  UTL_HTTP.set_header(v_http_request,'Host','xmlhub-test.xxx.xx');

  UTL_HTTP.set_header(v_http_request,'User-Agent', 'Mozilla/5.0 (Windows NT 5.2;)) RV:12.0) Gecko/20100101 Firefox / 12.0 ');

  Utl_http.set_header(v_http_request,'Accept','Text/HTML,application/XHTML+XML,application/XML;q=0.9,*/*;q=0.8 ');

  UTL_HTTP.set_header(v_http_request,'Accept-Language','en-US,en;q=0.5');

  -UTL_HTTP.set_header (v_http_request, 'Accept-Encoding', 'gzip, deflate');

  Utl_http.set_header (v_http_request, 'Connection', 'keep-alive');

  -UTL_HTTP.set_header (v_http_request, 'Referer','https://portal-test.bnr.ro/portal/page/portal/BNR/extranet/opma_main/opma/wsclient-xmlhub.html');

  text/html; Charset = UTF - 8-' multipart/form-data ".

  Utl_http.set_header (v_http_request, 'Content-Type', ' multipart/Form-data');

  Utl_http.set_header (v_http_request, "Transfer-Encoding", "chunked");

  Utl_http.set_header (v_http_request, "Content-Length", l_clob_len);

  Utl_http.set_header (v_http_request, 'id', '"downloadMessage" ');

  Utl_http.write_text (v_http_request, p_xml.getStringVal ());

  ...

  What can I do? How cand I try. I tried dozens of variants (query of xml > 180 files).

  Please help me.

  Tjank you!

  Generate a model for POST UTL_HTTP, of the w.

  I suggest using the free version of SoapUI for this. Very simple. Create the new project of REST. Enter w location (URL). Generates a sample call and look at how the HTML call is formatted. You can also trigger test POST CALL using SoapUI. When it works, copy - paste this MESSAGE template for use in PL/SQL

  From what you have posted, it seems to be an error in user code. So if you can get the details of the correct POSITION, the user code should work.

• Basic authentication with the RESTful WEb service and a Web Service reference

  Hi all
  
  We have made significant progress on getting an application to work with RESTful web services, but are now trying to understand how to lock a RESTful Web service while making it available for a particular application.
  
  We use one of the 'emp' table sample web services come with Apex 4.2 and are trying to apply the Basic Auth to the WEb Service using Weblogic filter defined in the web.xml file. Which works very well. I now get challenged when I try to go to:
  
  https://wlogic.edu/Apex/BNR/ACE/HR/empinfo/
  
  And when I authenticate this challenge, I am able to get the data. (we are usiing the Weblogic-level LDAP authentication)
  
  However, I'm not sure how to get even basic authentication to work with Web Service reference in my application. I see the error message in the application when I try to call this Web Service:
  
  401 Unauthorized <
  
  And I see:
  "The request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the request already includes identification of the authorization information»
  
  How can I provide the credentials in the Web reference or provide credentials in the Application?
  Web service works fine if I remove the auth basic RESTful web service in the Web.xml file.
  
  We should NOT use basic auth and auth Weblogic web service definition basic RESTful Workspace use instead. If so, how would we implement THIS basic authentication in the definition of Web Service and the Web SErvice reference on the application?
  
  Thank you
  Pat

  Hello Scott,

  Thank you. There is a function for rest in the package:

  function make_rest_request(
  --
  -- This function invokes a RESTful Web service with the supplied name value pairs, body clob, or body blob
  -- the response as an clob.
  --
  -- Arguments:
  --   p_url                  The url endpoint of the Web service
  --   p_http_method          The HTTP Method to use, PUT, POST, GET, HEAD or DELETE
  --   p_username             The username if basic authentication is required for this service
  --   p_password             The password if basic authentication is required for this service
  --   p_proxy_override       The proxy to use for the request
  --   p_body                 The HTTP payload to be sent as clob
  --   p_body_blob            The HTTP payload to be sent as binary blob (ex., posting a file)
  --   p_parm_name            The name of the parameters to be used in name/value pairs
  --   p_parm_value           The value of the paramters to be used in name/value pairs
  --   p_wallet_path          The filesystem path to a wallet if request is https
  --                          ex., file:/usr/home/oracle/WALLETS
  --   p_wallet_pwd           The password to access the wallet
  --
      p_url               in varchar2,
      p_http_method       in varchar2,
      p_username          in varchar2 default null,
      p_password          in varchar2 default null,
      p_proxy_override    in varchar2 default null,
      p_transfer_timeout  in number default 180,
      p_body              in clob default empty_clob(),
      p_body_blob         in blob default empty_blob(),
      p_parm_name         in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_parm_value        in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_wallet_path       in varchar2 default null,
      p_wallet_pwd        in varchar2 default null ) return clob;
  

  My point was that using the API makes things easier if you have to look for a solution.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Unable to connect to the VMware web service: invalid key file

  Hello

  We have a CPO 2.3.1 who refuses to connect to vCenter (see newspaper excerpt at the end of the post).

  Recently, we changed our server vCenter (part of a 5.1 update).

  We tried the following workarounds:

  • Remove and add all the elements of the platform from the portal using services SE
  • Re import automation packs (4 of the Starter Edition v2.3.1.38)
  • Re on the keystore password

  No change at all...

  Do you have an idea on how to fix this?

  Thank you.

  Kind regards

  Stone

  || 235. 02/10/2012 15:46:21.667 | 6072. WCF: http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord ' gravity 'Error' = >http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxhandling of an exception. . Tidal.Automation.Server.exe Tidal.Scheduler.Common.Communications.CommunicationException, Tidal.Scheduler.Common, Version = 2.3.0.0, Culture = neutral, PublicKeyToken = fba593b23cf207cdthe connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: Invalid keystore. to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)Tidal.Scheduler.Common.Communications.CommunicationException: the connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  || 236. 02/10/2012 15:46:21.667 | 6072. An exception that is not of type rhapsodyexception has been captured while a webmethod call was made.  This exception has been intercepted and generic.

  || 231: 02/10/2012 15:46:21.667 | 6072. EXCEPTION (Tidal.Scheduler.Common.Communications.CommunicationException): The connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  Stack trace: at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. <> c__DisplayClass1c. b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object, Object [], Object [] entries & exits instance)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  You have an invalid key file because the HTTPS certification has changed. You must remove the old keystore file and restart the OPC Server and then reconnect / run something against vCenter.

  It is also possible to host Adatper framework/java problems I've seen often.

  If you need more information, you will need to prosecute TAC with your service contract please. Normally, we try to solve no newspapers on the forums.

  -Shaun Roberts

  CIAC/CPO support team leader

  [email protected] / * /.

• Integration with the secure web service IS deployed on EBS

  Hello experts,

  I have a REST webservice deployed to an Instance of the EBS. I try to call the web service using a mobile application in the ADF. However, the web service is secure and requires security settings to be sent in the request header.

  Anyone can recall or explain how I can add a custom header to the object of the application for the REST web service? Any help will be appreciated.

  Thank you

  Abhishek

  Hi Abhishek,

  You can do the following:

  String theUsername = "abc";

  String thePassword = "pass";

  String userPassword = theUsername + ': ' + thePassword.

  String encoding = new sun.misc.BASE64Encoder () .encode (userPassword.getBytes ());

  restServiceAdapter.addRequestProperty ("Authorization", "Basic" + coding);

  If you use Webservice DataControl, then automatically the connection information in the login form is injected into the webservice framework.

  Kind regards

  Deepak

• Access a secure web service of ADF Mobile Application

  Hello

  We try to create an ADF Mobile application that uses a secure web service located in Oracle EBS (with SOA Suite).

  We use JDeveloper 11 g 11.1.2.4.0

  Initially, create usd a Control(SOAP/REST) Gallery Web Service data and provided the WSDL document. We tried to run on a simulator, but not did not do anything. We have also found a way to provide the user name and password. So we left it there.

  Then we tried to create a Java desktop app to check if it was a problem with our server. In the desktop application, we created a "Web Service Client and Proxy" new gallery followed the steps and used oracle/wss_username_token_client_policy, added the code below to put the username and password and was able to call the service and retrieve data.

  (reqContext.put (BindingProvider.USERNAME_PROPERTY, "DBAKER");

  reqContext.put (BindingProvider.PASSWORD_PROPERTY, "xxxxx");

  So we thought to return to the application the ADF Mobile and creating a "Web Service Client and Proxy" it, but when we built this project, we had the ' annotations are not supported in - source 1.4 "&" generics are not supported in - source 1.4 "errors and found that ADF Mobile does not support beyond Java 1.4" "» (Is that right?)

  We then found the video "to access the secure Services of ADF Mobile Web" by Shay (https://www.youtube.com/watch?v=rk5om3o3Pas) and saw that he was using a login server.

  We wanted to confirm if you use a login server is the right path to access a secure web service of an Oracle ADF Mobile application?

  Are there other ways to do it?

  If we need to create a login server, can provide you links that will put us on the right track in establishing a connection server that can connect to the EBS?

  Thank you.

  The URL must point to a protected page that prompts the user for basic authentication.

  See an example here:

  https://blogs.Oracle.com/Shay/entry/accessing_secure_web_services_from

  As well as the blogs linked at the bottom of this entry.

• The implementation of RunProgramInGuest of VIX using the vSphere Web Services SDK?

  Hello

  A few months ago I developed a python API for VIX, but as I needed to extend the functionality of this API (performance monitoring, host management, etc.) I moved the vSphere Web Services SDK.

  However, I did find a way to implement some comments VIX as LoginInGuest or RunProgramInGuest functions using only the Web Services SDK.

  Is there a way to do this? I thought that each function VIX has been translated internally to a soap request, but now I think that is not the case for these functions of comments, if so, how VIX inwardly does them?

  Thanks for your help!

  Sebastian Tello

  Currently, if you must implement specific comments operations running a specific script/application or by connecting to a guest, you must use the VIX API. This feature is not currently exposed in the vSphere API, you will need to use a combination of both, until VMware them integrates in the vSphere API core. For more details on the future of VIX, take a look at this blog post - http://www.virtuallyghetto.com/2010/11/what-is-vmware-vix-api-and-its-future.html

• Geocoding an address using the Google web service

  Hello
  
  Is it possible to access Google geocoding web service from an Oracle procedure? If Yes, then can you please give an example?
  I want to provide an address that is not formatted as an input parameter and get the coordinates, if the address is valid.
  
  Thank you
  M.R.

  Hello M.R.,.

  Yes, it is possible.

  Here is an example that I use myself:

   create or replace function getLatLon( p_address varchar2 ) return varchar2 is
      l_http_req  utl_http.req;
      l_http_resp utl_http.resp;
      l_response long;
      l_latlon long;  
  
      l_responsecode number;
      l_accuracy number;
  
      l_google_key varchar2(100 char) := 'Put_your_google_key_here';
  
    begin  
  
      l_http_req := utl_http.begin_request(
        url => 'http://maps.google.com/maps/geo' ||
               '?q=' || utl_url.escape( url=> p_address, url_charset=> 'utf-8' ) ||  -- address to geocode
               '&output=csv' ||                         -- simplest return type
               '&gl=DE' ||                                 -- set this to your own country code
               '&key=' || l_google_key              -- Google API site key
      );
  
      l_http_resp := utl_http.get_response( l_http_req );
      utl_http.read_text( l_http_resp, l_response );
      utl_http.end_response( l_http_resp );  
  
      l_latlon := substr( l_response, instr( l_response, ',', 1, 2 ) + 1 );  
  
      l_responsecode := substr(l_response,0,3);
      l_accuracy := substr(l_response,5,1);
  
      if l_responsecode = 200 and l_accuracy >= 8 then
        return l_latlon;
      else
        return l_latlon;
      end if;
  
    exception
      when others then return null;
    end getLatLon;
  

  This code uses the older v2 of the google api, so you still need a google api for that key. But it shouldn't be hard to change the code to use the new api v3.

  Hope this helps,
  Dirk

• How send to an XML web service?

  I am brand new to Flex. I am writing a program that uses web services to send and receive data. I got so that he can receive the XML of the web service. However, I also need to send it, and I'm stuck.
  
  I tried the following code:
  
  < mx:WebService id = "MyService".
  "WSDL =" http://localhost/FlexTest/service1.asmx?WSDL "
  useProxy = "false".
  result = "resultHandler (Event)" >
  
  <!-Entry: XML Document... Output: String->
  < mx:operation name = "HelloPersonAcceptsXmlDocumentReturnsString" >
  < mx:request >
  < personXmlDoc > xmlPerson < / personXmlDoc >
  < / mx:request >
  < / mx:operation >
  
  <!-Entry: XML node... Output: String->
  < mx:operation name = "HelloPersonAcceptsXmlNodeReturnsString" >
  < mx:request >
  < personXmlNode >
  xmlPerson.Person
  < / personXmlNode >
  < / mx:request >
  < / mx:operation >
  
  <!-Entry: String (XML Format)... Output: String->
  < mx:operation name = "HelloPersonAcceptsXmlStringReturnsString" >
  < mx:request format = "xml" >
  "< personXmlString > < p1:Person xmlns:p1 =" http://impact-tech.com/schemas/FlexTest "> < p1:ID > f1bd45fc - 544 b-489 d-83cf-349d1f9740ec < / p1: I D > < p1:FirstName > Joe < / p1:FirstName > < p1:MiddleName > c. < / p1:MiddleName > < p1:LastName > kick < / p1:L astName > < p1:BirthDate > 2006-09-11 T 14: 03:04.4755443 - 04:00 < / p1:BirthDate > < p1:IsMarried > < /p1:IsMarried > false < p1" : NumChildren > 0 < / p1:NumChildren > < p1:NetWorth > 100000 < / p1: NetWorth > < / p1: Pers on > < / personXmlString >
  <!-{xmlPerson.toXmlString ()} < personXmlString > < / personXmlString >->
  <!-{txInput.text} < personXmlString > < / personXmlString >->
  < / mx:request >
  < / mx:operation >
  
  < / mx:WebService >
  
  In the first operation, 'HelloPersonAcceptsXmlDocumentReturnsString', I try to send an XML object. During the second operation, 'HelloPersonAcceptsXmlNodeReturnsString', I try to send the root node, xmlPerson.Person. In both cases, what is actually sent is literally the text that I put in the node < application >, not the object the text refers. For the first, "xmlPerson" then gets sent to the target, not the XML doc what it refers to.
  
  In the third operation, I tried three different things, and two are commented. I tried to refer to the XML object using the toXmlString() method, but again, it has literally sent the text "xmlPerson.toXmlString ()". I tried the brace link, but then nothing is sent to the web service. I also tried to build the XML node and with values, but I get an error from the web service saying that it cannot be analyzed because there is an illegal line 1, position 1 character. The only thing that worked was to add a text entry box, copy - paste the exact same structure XML that I tried to build manually and then use binding to the text property of the control InputText. Then it works fine. But I can't actually do, it's just to test.
  
  So my question is how a < application > node that is part of the web service operation that makes reference to an object and sends the value of this object to the web service, not literally all text is typed into this node. I looked at Web Services and sections of the help data binding and did not see examples on this. Everything was much more simplistic with binding to controls. Can someone help a newbie, please?

  I do not understand how this isn't a matter of Flex Builder, since it has to do with how Flex Builder interacts with web services and how objects are used in the binding in MXML.

  But anyway, I got this code for future reference of someone else to research work in this forum:

  Declare a custom in MXML class has been the key to allow the correct link:

  
  "WSDL =" http://66.129.123.211/FlexTest/service1.asmx?WSDL "
  useProxy = "false".
  result = "resultHandler (Event)" > "

  
  
  
  {testPerson.GetXmlDoc ()}
  
  

• Connect to the HTTPS web service

  When you try to build the secure web service partner link (URL starts with https://...) I got an error about the lack of certificate? How to provide the cert file < I have a good, but do not know how to enter Web Logic server.

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/secmanage/identity_trust.html

• Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

  Kindly help, I tried to update the firmware, but still my web services will not turn on.

  RGS

  G

  Hi GayleneC,

  Thank you for the update and additional information.  I really appreciate it.

  You indicated that you tried to update the firmware, I wonder because the printer is not connecting to web services that is may not have logged in to check the updates of the firmware.  I have included two links, one is for the Windows of HP LaserJet Pro Series Firmware Update Utility version , the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose your operating system and we will try and update the firmware without using the front panel of the printer.

  After you run the firmware update utility, please disable IPv6 wireless via built-in web server.  Please follow the steps below:

  1. To open the HP embedded Web server, type the IP address of product in a Web browser address line. When it opens, it should look like the screenshot below.
     
     
  2. Please click on the 'Network' tab as highlighted in the screenshot above.
     
     
  3. Please click on 'Advanced' in the side menu on the left as indicated above. Please disable IPv6 and click 'apply '.
     
     
  4. Please click on the "HP Web Services" tab.
     
     
  5. Please click on the button "activate". Print the newsletter of Web Services.