Similar Questions

• Are tables autom. (if any) created during the import with impdp.exe?

  Just another question regarding the process of impdp.exe.
  
  Suppose that a table is dropped after the previous export operation (expdp.exe) (for the full database)
  Now I perform an import operation (impdp.exe).
  This table is automatically created again?
  
  What about users (patterns)? They are automatically created if they are in the dumpfile, but
  not found in the target database?
  
  Peter
  
  Published by: user559463 on February 9, 2010 07:21

  schemas will be created automatically only when you import lots.
  tables will be created either you do complete / schema / table level import.

  You can give a try test env

• Unable to add a new column to the table of the LCD? Option, just usually add it.

  I have a form of LCD with a table in it. Im trying to simply add a new column to the table. The option is there, but the column appear just after clicking Add the column to the left. I selected a column, right click the space > insert > column to the left. But the habit intsert. The object table properties tab shows lines and colum numbers, but they are grey.
  
  See screenshots:
  
  http://www.emermed.NET/staging/forums...
  
  http://www.emermed.NET/staging/forums...
  
  It is a dynamic array, where a new line can be inserted using a button. Is that the dynamic nature of the question? ID hate to cancel all the flow dynamics and programming just to add a column, and then reapply them all.
  
  Thank you!

  Hello

  You do not add the columns in the object > palette (screenshot 2) of the Table. I suspect that the problem is that it is not enough on the page (in the content area) to add the column. In the screenshot 1, if you look at the width of the column highlighted from the space to the right of the table, you will see that a column can be added due to restrictions of space.

  Reduce the width of the column highlighted (temporarily), and then add a column. Once added, you can resize the columns to match the width of the page.

  Hope that helps,

  Niall

• I recorded my new password to download Lightroom; the installation program then asked my password and rejected the password with that I just signed up. All of the suggestions.

  I recorded my new password to download Lightroom; the installation program then asked my password and rejected the password with that I just signed up. Any suggestions?

  Could you please try the computer administrator password here.

  Kind regards

  Hervé Khare

• Add notes to the content of the table cell

  Can someone tell me if it is possible to add cross-references to the text in a cell in a table? After searching in the forums, this question was raised by another user in 2006, and I was wondering if Apple had added this feature yet.

  Thanks for your help with this.

  Notes cannot be applied to the text in the body of the main text, and not in objects such as Tables, text boxes or shapes.

  Since 2013, Apple has removed a long list of features.

  Peter

• How do I change or add constr. foreign key to the table whose children or data lines

  Hello
  
  I have a table with the name of Department in which the DEPTNO column is a column of data and primary key in it for all columns. Now, I have a table EMP where DEPTNO column is not having any constraints, including constraint foreign key also. I now have data in the EMP table for all columns. I would now add the DEPTNO column foreign key constraint in the EMP table that references the column DEPTNO in DEPT table. Both the table have not all null values.
  
  I need to add the foreign key without removing the data in the EMP table.
  
  
  Please advice.
  
  Kind regards
  Alriq

  In addition, if you have pre-existing data that will never have a parent record but you want to ensure that any NEW data is consistent with the FK constraint you can always create it with the NOVALIDATE option:

  SQL> CREATE TABLE EMP_BKP AS SELECT * FROM SCOTT.EMP;
  
  Table created.
  
  SQL> CREATE TABLE DEPT_BKP AS SELECT * FROM SCOTT.DEPT;
  
  Table created.
  
  SQL> DELETE FROM DEPT_BKP WHERE DEPTNO=10;
  
  1 row deleted.
  
  SQL> ALTER TABLE DEPT_BKP ADD CONSTRAINT DEPT_BKP_PK PRIMARY KEY(DEPTNO);
  
  Table altered.
  
  SQL> ALTER TABLE EMP_BKP ADD CONSTRAINT DEPT_FK FOREIGN KEY(DEPTNO) REFERENCES DEPT_BKP(DEPTNO);
  ALTER TABLE EMP_BKP ADD CONSTRAINT DEPT_FK FOREIGN KEY(DEPTNO) REFERENCES DEPT_BKP(DEPTNO)
                                     *
  ERROR at line 1:
  ORA-02298: cannot validate (TEST_USER.DEPT_FK) - parent keys not found
  
  SQL> ALTER TABLE EMP_BKP ADD CONSTRAINT DEPT_FK FOREIGN KEY(DEPTNO) REFERENCES DEPT_BKP(DEPTNO) NOVALIDATE;
  
  Table altered.
  
  SQL> INSERT INTO EMP_BKP(EMPNO,ENAME,DEPTNO) VALUES(9999,'Test Emp',10);
  INSERT INTO EMP_BKP(EMPNO,ENAME,DEPTNO) VALUES(9999,'Test Emp',10)
  *
  ERROR at line 1:
  ORA-02291: integrity constraint (TEST_USER.DEPT_FK) violated - parent key not found
  
  SQL> SELECT * FROM EMP_BKP WHERE DEPTNO = 10 ORDER BY EMPNO;
  
       EMPNO ENAME      JOB              MGR HIREDATE                   SAL       COMM     DEPTNO
  ---------- ---------- --------- ---------- ------------------- ---------- ---------- ----------
        7782 CLARK      MANAGER         7839 06/09/1981 00:00:00       2450                    10
        7839 KING       PRESIDENT            11/17/1981 00:00:00       5000                    10
        7934 MILLER     CLERK           7782 01/23/1982 00:00:00       1300                    10
  

• Add and remove users from the table

  Hi, guys. I do a system that allowed admin in the user control.

  The ID is = admin

  The neck is = 6649481

  Can someone help me to check add it and remove the part.

  Actually, it may work, but I would like to make he repeats no is allowed, but it works on the index of '0' and then index 1, it will not stop the user to add id repeated.

  Delete if I had to remove the loop will be fine and work well, but it can only remove the top. It's like first first concept but I would like to do as a function of the ID given to remove from the table.

  
  

• 11.1.2.3 Jdev upload file with Spanish content to the table

  I am trying to download the content of files that have Spanish letters. He gets transferred to the column of the table, but when she showed on the chart on page jspx, it has some weird characters with '? ' etc.

  If I create a row in this table and enter some Spanish characters, it displays correctly in the column.

  We need some adjustment here or I have to take care of Spanish language characters when you download it... I mean in the listener to download code?

  What use;

  Scanner in = new Scanner (yourFile);

  You can read the lines using in.nextLine ();

  See if you get the same result.

  Concerning

• Add a new column in the table of research Serial_number remaining each time 1-10

  Hi all
  I need to add a column to the lookup table Serial_number and what I want is that he must view 1-10 on each page. I press Next and it should even once show Sr 1-No...
  To do this, I added a temporary variable to the SearchVO and central for the Table region code is the following:-
  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processFormRequest (pageContext, webBean);
  Am = (SearchAMImpl) pageContext.getApplicationModule (webBean) SearchAMImpl;
  SearchVoExImpl vo = (SearchVoExImpl) am.getSearchVoEx ();
  SearchVoExRowImpl searchRow = (SearchVoExRowImpl) vo.first ();
  searchRow.setSerial (new Integer (1));
  While (VO.hasNext ())
  {
  If (searchRow.getSerial () .intValue () == 11)
  searchRow.setSerial (new Integer (1));
  
  int i is searchRow.getSerial () .intValue ();.
  Integer p = new Integer(i+1);
  searchRow = (SearchVoExRowImpl) vo.next ();
  searchRow.setSerial (p);
  }
  }
  
  I am facing this problem is when I sort the result table by any column, that serial number gets disappeared.
  And also when I press the Go button to search it shows me the final results first.
  Please help me.

  "Now the left only problem is that it shows me the latest results first."

  This could happen if the rowIterator has been moved to the end. Please try this code.vo.setCurrentRow (vo.first ())

  Thank you

  Stephany

• I'm looking to add a button to reset the table of contents (collapse of all books)

  Our users get lost in the open books - Yes, I know it's a completely different problem, but I was asked to add a button to "reset" the TOC books to reduce all the books.

  We use IE 8 and HR 10

  I looked everywhere for existing javascript that would do this, but I'm not. Is this something that someone else has already done? I'm not a person of script.

  Thank you!

  Laura

  Well, see if it works.

  Rather than use the link option, click the option for JavaScript.

  Type the following code in the OnClick field:

  parent. Location ='http://www.desiredsite.com/News_Feed.htm'

  Dismiss all dialogs, regenerate and test.

  See you soon... Rick

• Add icon w/link to the table of the Spry data set

  I placed an icon inside a table data cell, then tried to give him a hyperlink to a clip. However, the link appeared as underlined text in the cell of the table under the icon.

  Then I tried to type the HTML code in code view, and this is what it looked like. It also did not work the display page:

  "< td align ="center"> < img src =" graphics/speaker.jpg"width ="29"height ="30"/ > < img src =" graphics/movie.jpg "a href="graphics/melanoma1.wmv"/ > < table >

  How I would make the icon itself launch the WMV clip?

  Thank you!

  

  How I would make the icon itself launch the WMV clip?

  By using the appropriate syntax.

  If you do not border link Hypertext for image links, add this to your CSS:

  an img {border: none ;}}

  --
  Mark A. Boyd
  Keep-on-Learnine :-)

• Problems with several .exe slow down my computer - see in the Task Manager.

  Hi everyone - I had posted in other sections of the forum such as: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/why-does-dllhostexe-com-surrogate-consumes-memory/bd7e42bb-802d-4eb9-95b2-2bb6b566996d?page=1&tm=1416087694827

  but still have no answer to my problem - I just wanted to reference I've tried many "patches" suggested, without success.

  On the question... in addition to causing me problems of dllhost.exe, I now see a list of other authors in my task which are guilty of collaboration Manager.  The interesting thing is that I put the finger on a particular instance of dllhost.exe (COM Surrogate) who is about 8 k in size - whenever I'm deleting this one (which can sometimes be difficult to find when there are multiple instances of similar size) all other instances of dllhost.exe problem simultaneously remove themselves as well.  This is only a temporary solution as the problem will resume as soon as 10 minutes later, gobble up all my CPU and memory.

  Anyway - as I said, I noticed several other spots displayed - the interesting thing is that these tasks ALSO disappear when I delete the task of dllhost.exe k 8 initiators.

  Here is the list of the other guys who gobble up my system resources:

  dllhst3g.exe

  dpnsvr.exe

  dplaysvr.exe

  dvdupgrd.exe

  Rundll32.exe

  wiaacmgr.exe

  cmmon32.exe

  Has anyone else noticed these programs causing problems?  I would like to know how to solve this problem, but since the last message in the previous topic, it still has not been resolved by Microsoft...

  I know this post is a few months old, but I stumbled across it all fighting the same problem on a laptop of family members.  McAfee or Malwarebytes was able to track it down in my experience either.

  The task Mgr showed the same process taking a ton of memory and CPU.

  To resolve this issue, it turns that Symantec posted a tool that you can leverage.  Here is the link: http://www.symantec.com/security_response/writeup.jsp?docid=2014-111020-0511-99

  I would leverage the link Symantec before using the links of Evan (above), these links are to sites with strong ads and an EXE from a developer private.

  I hope this helps.

  -Higgins

• How to add zeros to string in the table of the ADF

  I have af:table with a column that can have values such as "01", "STW", "RT003", etc., from the DB.

  I want to display the total length of 10 String with no leading zeros if the length is less than 10.  How can I do?

  I tried under expression groovy in VO and gives an error

  String.format("%10s", mycolumnname). Replace (' ', '0')

  Another option is to add an attribute derived from SQL in your VO, who gets the necessary column padded with zeros using built-in SQL Oracle LPAD function. For example, you can use the following SQL expression for the new attribute:

  LPAD (column_name, 10, '0')

  Another option is to add a transient attribute to your VO and specify an expression good Groovy for it, for example:

  (voAttrName is nothing)? ("NULL: String.format("%1\$10s ", voAttrName) .replace (' ', '0')

  Notice the backslash in front of the dollar sign. It is necessary to escape the dollar sign, which is a special character in Groovy.

  This approach is not good if the VO attribute value can contain spaces, as spaces of the value will be replaced by zeros too.

  Dimitar

• Can I change the header typecase 'Table of contents' to the 'Table of contents' or I'm stuck with it in Captivate 7?

  !

  This header can be replaced by your title. Click on the Info button for

  Table of contents, fill in the title field with the text you want to appear.

• In the search box at top right, how do I change from Google to Google.co.uk. Or, just add Google.co.uk

  In the search box at top right, how do I change from Google.com to Google.co.uk. Or, how I just add Google.co.uk to the list

  You can go to the next page and choose the one you want to add; probably one of the elements of #11. Main engines:

  http://mycroft.mozdev.org/search-engines.html?name=Google.co.UK

  See:

  • http://support.Mozilla.com/en-us/KB/search+bar
  • http://KB.mozillazine.org/Search_Bar