importFiles for the image sequence

Similar Questions

• Create proxy for the image sequence

  Hey guys,.

  Today, I was delighted to see the newly implemented for PremierePro proxy workflow.

  Unfortunately I have not yet figured out how to apply this workflow for image sequences.

  Is this possible?

  Background:

  We do not stop motion animation and all our images always comes into frame sequences with each frame being 20 MP. We want to keep the resolution up to photo-serrure, because we would like to keep the possibility to crop and zoom into images.

  So far, we have created lowquality of sequences of images as proxies (in the same resolution) and they use them for editing in a FullHD timeline, where we can evolve and frame (and of course change) images. After picture lock replaced the original media. Once the images is online and the harvest is final, we create a FullHD prores file for VFX and editing.

  But this process is error-prone.

  When I now import a sequence of images in the creation and create a proxy for her, a mov with only the first image file is created.

  Which is obviously useless.

  My question:

  1 would it not possible to import a sequence of images and create a sequence of images of proxy (with the same interpretation of the images, i.e. of framerate) from the original image sequence?

  2. the sequence of images proxy perhaps erred in lower resolution (original image in format 5760 x 3840 px, resolution 1920 x 1080 proxy), and once I pass the proxy to original scaling is adjusted accordingly.

  Really looking forward to some tips to achieve this!

  Thanks and good luck

  Max

  I had a little further:

  I made a mistake by creating templates in the MediaEncoder:

  I created a coding model and not a model of ingestion (who both the end of the .edr file), which should in fact have been obvious.

  So now I have:

  1 has created a file of 5760 x 3840 Prores4444 out of sequence of images

  2 imported the first PorRes4444

  3 creates a proxy using my own template (ProRes 422 Proxy 1920 x 1280) with aspect ratio 3:2.

  It works, BUT:

  When I play the file on the timeline proxy, the proxy file is adjusted differently than the original file (proxy disabled), but only during playback.

  It is probably a completely different question, I'll create another post for this.

• Text in MSO disappears at the top of the image sequence

  Hello. I have a sequence of images to auto-play, and I want a text is displayed above it after the image sequence plays. I put the text in an autoplay MSO, the first State being a box empty. The text appears so when I saw using the content for the Desktop Viewer, but it does not appear when I saw on the iPad, or when I update the folio article. How can I get the text?

  Why the first State is empty? The two States should be identical, set to play once and stop finally State.

• Text in front of the image sequence

  In InDesign, I have a block of text at the top of a sequence of Folio Overlay images.

  When I preview the it, the text will appear for the first image in the image sequence, then disappears.

  How can I do to be visible for the entire sequence?

  I found adding the text in a floating framework is the best way to do it. Make sure that the empty frame in which you paste the text block is bigger that the text frame itself.

  I tend to use 'Auto-detect' for the direction and made in the form of "vector".

• problem: import the image sequence into adobe media encoder

  Hello

  have a problem with adobe media encoder CS6, change the display Format to 25 time frame in the preferences of media coder, I import a series of TGA (170 images) to media encoder in an image file TGA sequence, the series generated from 3D applications Max and ToonBoom, specification of TGA series 1080 50i "1920 X 1080 - high filed - 25 frames per second. When I import the sequence, encode media recognize the sequence as 1920 X 1080 - progressive - 29.97 FPS, to interpret the window images options I change the settings of the upper sequence deposited - 25 fps, and I export to quicktime mov 1920 X 1080 - class top - 25 fps uncompressed

  the problem:

  mov file is 06:20 and it is right for the 170 25 fps calendar but mov file does not contain the tga series image, image freeze in time code 05:16 (number 142 of the framework) and duplicate the 142 image to the rest of the video file

  If I do not change the pace to interpret the window options images for the tga sequence what media encoder recognizes as 29.97 FPS mov file contain all TGA images, but with a duration of 05:16 which not 25 fps

  in adobe media encoder CS5.5 I don't get this problem at all

  1. How do I solve this problem?

  2. how to force CS6 adobe media encoder to recognize the image sequence imported as rate of 25 fps?

  Windows 7 Ultimate SP1, Adobe Creative Suite Master Collection CS6

  Thank you

  Post edited by: yas1amin1mah

  "Film" is finally fixed in November 2013 video updates of creative cloud. If your version of Premiere Pro and SOUL is or more 7.1.0 everything should work as expected. But don't forget to actually perform "Film" on your source in first Pro CC or CC SOUL that, otherwise your sequence of images will continue to be interpreted as 29.97 FPS by default.

• save an image in an image file and reloaded on another computer for the image processing

  Hello

  Can I save the image to an image file and then reload the file on another computer for the image processing? What type of image format should I save for it? Is there any loss of image if I do this? The machine with the camera sits in our lab, and I want to test the software on my own computer image processing. So can someone give some good ideas on this. Thank you

  Jane

  I assume you have the module development VDM and vision acquisition software going TO on your computer.

  So just use playback IMAQ and IMAQ save functions. BMP, png are good for losless save unlike jpg and jpeg2000.

  Hope this helps

• Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

  change how I get pictures on incoming emails

  Most, but not all emails that I receive that contains images come as 'slide show', and where the image should be, there is a blank box with a red x.  Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

  I know that they are sent correctly, because I send on my iPod and the photos are where they should be.

  I have Windows 7 and I hope you can help me.

  Thank you

  Hello

  ·         What browser do you use?

  ·         What happens when you click on the slideshow of the photo? The photos are displayed when you click the slide show?

  If you use Internet Explorer, then I would suggest that you follow the instructions in the link and check if this can help:

  http://support.Microsoft.com/kb/283807

  If operations since the link above does not help then I suggest that you post your query on the Windows Live forum for assistance:

  http://windowslivehelp.com/product.aspx?ProductID=15

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• How to check the image source for the image which is losted?

  Hello world

  How to check the image source for the image which is losted?

  If the image source already exists, I can read the PlaceItem.file.fsName.

  But if remove the image of the source, read the PlaceItem.file.fsName will report the error: there is no file associated with this element

  Thank you

  If (app.documents.length > 0) {}

  var sourceDoc = app.activeDocument;

  sourceName = sourceDoc.name var;

  artItem =]

  for (i = 0; i < sourceDoc.pageItems.length; i ++) {}

  artItem [i] = sourceDoc.pageItems [i];

  If (.) TypeName artItem [i] == 'PlacedItem') {}

  If (.imageColorSpace [i] artItem == undefined) {}

  Alert ("the file is the link, but I don't know whether or not the source image is losted");

  }

  }

  }

  }

  Use try/catch to catch the error

  if (app.documents.length > 0) {
      var sourceDoc = app.activeDocument;
      var sourceName = sourceDoc.name;
      artItem = []
      for (i = 0; i < sourceDoc.pageItems.length; i++) {
          artItem[i] = sourceDoc.pageItems[i];
          if (artItem[i].typename == 'PlacedItem') {
              if (artItem[i].imageColorSpace == undefined) {
                  try {
                      var fname = artItem[i].file.name;
                      alert("file name: " + fname);
                  }
                  catch (e) {
                      alert("The file is linking ,but source image is lost");
                  }
              }
          }
      }
  }
  

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge

• Error message when I try to print the pdf: "insufficient for the image.

  Part of my job is to create pdf documents, insert maps in pdf format, locking documents to prevent tampering, but that allows you to print and send them to customers.  Recently, I've updated for Adobe Acrobat Standard 11. Since then, I had trouble printing pdf documents, I create; I get an error message "insufficient data for the image. Cards in the document are not displayed, and it cannot be printed. If I re - create the document and do not put the permissions password to this topic, the document is fine. But I have to be able to lock my pdf documents to prevent tampering. Help, please!

  Thank you! I installed the 11.0.11 patch and it works!

• The avatar to add to the forum does not work.  Download Avatar (limit of 500 KB) - is present but there is no box to browse for the image.

  Download Avatar (limit of 500 KB) - is present but there is no box to browse for the image.

  If you have a plugin installed similar addblock or it will hang

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• To create a ToolTip text for the image with multiple image map links

  Hello
  
  RH6 using, that I imported a picture into a topic. For the images that I have created several maps image to post a link to other topics. However, I can't create a map image additional to that same image that includes only the screen Tip text. I get a message of invalid value: "Please select a file, bookmark or topic to bind the hyperlink to.»
  
  Is there a way to create a popup only the text of an image with multiple image map links? My final output will be to WebHelp but possibly migrate FlashHelp in the near future.
  
  Thank you
  
  FMnRH
  
  
  
  Thank you
  FMnRH

  If the image is at the beginning of the subject, or all alone in a reference topic, you can put "#" (without the quotes) as the link for each area reactive.

  If the image is larger than the viewing window, it can jump to the top, but only if the user clicks on the link.

  I tried wz_tooltips and like it. I agree with Leon, it will take time for the first image but maybe go faster later.

  Harvey

• Adobe Premiere Pro: place the image sequence in reverse order on the timeline

  Hi all

  I have a numbered sequence of jpg images of frame000 to frame100. It is important in numerical order... obviously. I am trying to find a way to drag files to the timeline so that they begin to the ribs and down in order. Shift clicking in the desired direction does not work as it does in aftereffects.

  I know that I can nest and reverse the speed but I prefer to avoid nesting at this stage. I have also no option for the files to renumber it is how they are generated and I have a ton to import.

  I hope someone can help.

  To get them in reverse order, the value project Panel list view and then click the name column, so that the files are now listed between 100-001. Drag the sequence. It works for your needs?