Similar Questions

• Import file .mkv of multiplex in Premiere Pro. Error code Timecode.cpp - 1096

  I am trying to edit some .mkv files in Adobe Premiere Pro.  Now, I know that's not possible, but I managed décimalisé the file .mkv with ts muxer and am able to import VIDEO and AUDIO of the original .mkv in Premiere Pro.

  But when I double click on the video to start editing and severed, I get the message:

  [..-.. \src\Timecode.cpp-1096] "crash" Adobe Premiere Pro.

  I am so frustrated, I'm about to pull my hair!  Any help would be appreciated.

  First does not support the mkv.

  You must convert the first to a format with that creation is comfortable.

  Hand brake

• Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different with different

  Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?

  Located in and out on a section and that export brands.

  .. .Rinse and repeat for the other section.

  Name each section and where it is exported to separately... and as you wish

• Adobe Premiere Pro for Mac CC 2015 does not open.

  Hi, I, ve downloaded Adobe Premiere Pro for Mac CC 2015 and spin OS Yosemite.

  When I try to launch the app, it goes through the boot process and then closes (or does nothing).

  I tried to uninstall and then re - install, but the same thing happens.

  Anyone got any ideas?

  Thanks in advance.

  Having had an online chat with Adobe, they have taken control of my mac and came to the conclusion that it was a permissions problem. They advised me to repair permissions with disk utility. I did and it did not work.

  They also advised me to create another administrator user account, it worked, however it is not convenient switch to another user account.

  In the end I did some research and found this solution.

  If you right-click the hard drive icon, info, unlock the padlock at the bottom and give full read & write to (your username (me)) it will ask you if you want to apply to all the files, I said yes.

  It took a few minutes to complete and then voila, I could open up, no problem.

  I hope this helps.

• AVI file won't play in Premiere Pro CS4

  I wonder if someone can show me a simple solution to this problem.

  I did an AVI movie with my Canon Powershot A2100 640 x 480 to 88 kbps and 769MB. After a tutorial of Project http://tv.adobe.com/watch/learn-premiere-pro-cs4/getting-started-02-setting-up-your-first-/ (and more) I can't my video to play. The games sound but the video portion is not... It does not correctly play with Windows Media Player

  As a separate trial, I ran my video using Adobe Media Encoder CS4 export to another AVI file and this file will play in Premier Pro. The only difference is that I exported it without the audio.

  Any thoughts?   My goal is to change the sound and hopefully reduce the size of the file so that it will be able to my site web watch.

  Thank you for your time

  Ralph

  For a film MJPEG, another popular CODEC is the Morgan.

  Good luck

  Hunt

• Cannot import and export MPEG2 files in After Effects and Premiere Pro.

  I don't know when, but a few days ago my Premiere Pro and Adobe After Effects do not recognize the MPEG2 files.

  When I try to open a Premiere Pro with a MPEG2 file in it: "this project contained a sequence that could not be opened. There be no preview sequence preset or codec file associated with this type of sequence.

  FAQ: Why some codecs and sequence presets missing my Premiere Pro installation?

• Import music turns into white in Premiere Pro

  Hello people!

  I recently reorganized my music library. Now that I'm working on a completely new project, I'm trying to import batch files in Premiere Pro, some files still eventually be total emptiness (with no music or any sound), and I had received an error for each of these files. I inserted an image in order to clarify what I mean.

  

  They are always the same files. I tried to search for the reason in the metadata of the files, but it does not seem to be any correlation between the information, size or duration of the import failed. The problem seems to affect both .mp3 and .wav files. I think I have the most updated version of Premiere Pro, 9.2.0. I'm sorry that I am not yet familiar with Premiere Pro troubleshooting, therefore all ideas for how can I solve this problem would be greatly appreciated!

  Try to clean your media cache database: http://help.adobe.com/en_US/mediaencoder/cs/using/WSb8e30982e628fbec-54c04a521312559a5de-7 ffc.html

• Shows GIF file is not transparency in Premiere Pro Mac OSX, but display in Windows

  I have the strangest thing that happens on a workflow in Premiere Pro CS5 and CS5.5. I imported a GIF file that has a border, but it is transparent in the middle to have empty show through. When you import the file into CS5 and CS5.5 on a Mac, the transparent part shows white.  When you import the it in Windows, it shows good transparency.  The workflow is HD and 30 frames per second.  I recorded the Photoshop file format PNG and PSD, without success.  What could happen.  I also sent the file to an Adobe expert and it has worked well on its system.  What setting could be spoiled in my Mac?  I thank everyone's help.

  Thank you

  FelizRunner

  So, let me get this right... you open the gif in Photoshop and you can see the transparency. Then save you it as a PSD, but you still don't see no transparency on the body on a Mac. Just for the hell of it, open the gif in PS, make the background layer, use the magic wand to select the area inside the frame which is supposed to be transparent, and then press the delete key. Now, save it as a PSD with maximized compatibility and try again.

• Premiere Pro freezes mac while making the fast color corrector & Rgb curves

  I'm having a problem that affects our business. We make ads that we of the object color correction using curves of fast color corrector and RGB. When these effects are added to the video sequence, the Mac Pro performance slows down considerably.

  Then when we make the project so that we can see the effects in real time, the computer crashes completely. The program usually informs us that it must close due to a serious error. I tried to reboot the computer, clean etc. permissions for this problem, but nothing helps. Why would this happen? Any ideas on how to solve it?

  Here are the specs:

  First Pro CC 7.2.1 using (4)

  Mac Pro: 3.2 Ghz Quad-Core Intel Xeon

  Memory: 24 GB

  ATI Radeon HD 5770, (1024 MB)

  OS: 10.8.5

  After tracking down technical support adobe, the issue is the video card. Our mac (2012 series) comes with a map of MB ATI Radeon HD 5770 1024 which Adobe Premiere pro interacts with when you perform the color correction. We have solved this problem by following these steps:

  In first Pro CC

  Go to FILE > PROJECT SETTINGS > GENERAL > under Renderer choose Mercury Playback Engine Software only

  This increase spectacular performance.

  The final fix will change our video card.

• IM Download premiere pro on mac nut cc, it is said "you run an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

  m download first pro cc on nut of mac, it is said "or running an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

  Hello

  Please see system requirements below: -.

  Premiere Pro system requirements for Mac OS and Windows

  I hope this helps you!

• Not directly download Premiere Pro CS6 Mac

  Hello

  I am trying to download

  Premiere Pro CS 6 of

  CS6-products download

  and for this purpose

  http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg

  but all I get is

  Access denied

  You do not have permission to access to " " http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg "on this server. "

  Reference #18.a7d81002.1416481258.69ae48a0

  doenst matter if I'm connected with my Adobe ID or not.

  Where can I download CS6?

  Hello

  Please follow the below mentioned procedure to start the download.

  1. Click on: Adobe - Adobe Photoshop elements 13 test free download | Adobe
  2. Paste it below mentioned link in the address bar and press return.

  http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg

  This should start the download, please come back if you are not able to download it.

  Thank you

  Atul Saini

• Premiere Pro CS6 Mac - second monitor has stopped working

  I've been using CS6 configuration dual monitor for a few weeks.  I activated the second screen for video playback in the settings and everything worked very well.  Now for some reason any the second screen no longer works with Premiere Pro for playing video (it will not preview fullscreen) even if for my second monitor option is checked in the preferences. I makes no changes to my system I know.  I really want to understand this because it is quite annoying and frustrating that it worked perfectly for 2 weeks and now it doesn't work at all. (Have restarted system already) Any help would be greatly appreciated!

  I spoke with tech support and they were able to help me solve the problem.  The solution involved moving my program on the second monitor and then reverse the setting of the option (IE, do the main monitor my monitor reading)... after that, I went it back by moving the program on the primary monitor and set the secondary monitor as my reading screen.  Seems to work fine now.

• Adobe Premiere CS6 isn't playing or import files .avi suddenly on my iMac...

  I started 2 years ago to work on a project. All my .avi files worked fine on my iMac 1 months ago. Suddenly, first decided to not play these video (no sound, no video). I have this message for each clip: "the import module returned a generic error." I tried a lot to the top of my projects, so it's not my project which is corrupt. I used the same exact files with the same exact Adobe Premiere project on my MacBook Pro and everything works fine... What can I do to solve this problem on my iMac? Thanks for your help!

  I found the problem on my iMac. There is only one more software on my iMac than on my MacBook Pro, Intego Virus Barrier. I've done the update of Intego and all my problems with Adobe CS6 now seems to be fixed. I had another problem with an update of Safari 2 years ago, and all of a sudden, I wasn't able to open Safari because of Intego Virus barrier did not work with the update. So this time, Intego Virus barrier had problems with the latest updated Mavricks, and it causes problems in Adobe Creative Suite 6.

  I'm very happy, now I can finish my documentary!

• Windows Movie Maker no video appears with imported files .avi

  Try to make the clips using videos or different formats with no luck.

  Try to use .avi and .mp4s on the movie maker program. Unfortunately it is only to record the audio of the film and not the films themselves. I don't need the audio, but I need the video to make videos. Help, please.

  Try to use .avi and .mp4s on the movie maker program. Unfortunately it is only to record the audio of the film and not the films themselves. I don't need the audio, but I need the video to make videos. Help, please.

  ===================================
  You might have more luck if you convert video clips
  before you import into Movie Maker wmv format.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• .aep file does not work in Premiere Pro CS6

  Hi all

  It is my first assignment in time, so bear with me, if there's an obvious solution here.

  I created a label (as for one interviewee) in After Effects that would slip on the screen and then cut out, featuring the person on behalf of the screen. I imported the name bar in illustrator, and then animated (with text) in AE and then imported the complete composition of PP. It worked for a PP project, but when I try to import the same file .aep in another PP project, does not appear the composition.

  In the project bin, I can view the file in the Source video and it works perfectly. As soon as I add to the sequence, it stops working completely.

  Can anyone think of any possible reason why this might be true? It drives me crazy.

  Well, not quite crazy, but I'm sure you get my meaning.

  A stupid question: your publication bound dynamically is 720 x 480, but what are the parameters of your sequence? Is it possible the framework is smaller and the bottom of your third is simply out of the screen?

  P.S. That top left section is called the project Panel.