Impossible operation completed (error 0x000006ba).

Similar Questions

• HP Color LaserJet CP5520 "impossible Operation completed (error 0 x 00000057).

  I'm trying to install the drivers on a print server on Windows Server 2008 x 64 for a printer HP Color LaserJet series 5520. Someone tried to run the installation package for the 64-bit driver and brought the print server. He installed the HP print monitor, and the print spooler would not start. Trying to solve this problem, the files in the registry and FileDepository associated with this printer model have been removed. The key to the Hp print monitor has finally removed (which was the last entry in the event logs) and was able to start the print spooler and print services have been restored. No further questions with this print server.

  I could add other drivers to the print server using the Add Wizard driver without any problem. That it is a 64-bit server, I try first to add 64-bit driver, but I get the error "unable to add series HP Color LaserJet CP5520 PCL 6, Type 3 - Mode user, x 64 driver. Impossible operation completed (error 0 x 00000057). »

  I downloaded this driver directly from HP and verified that it is the correct driver.

  I installed the driver on a client computer with Vista x 86, and I am able to add the printer and print on it without any problem.

  Any advice would be greatly appreciated.

  Lucas

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Unable to connect to the network printer. Impossible operation completed (error 0 x 00000100).

  This is the error "Windows cannot connect to the printer. Impossible operation completed (error 0 x 00000100).

  He was connected last night before I installed a new office and had to unplugging the computer at home. The two systems are Windows Vista and the printer is HP Photosmart 5540 uses the 5500 drivers. I used this for the past year, and I can see it in windows Explorer. It just does not connect!

  Hello

  Try to set up the printer with a static IP address and adjust the setting on each computer for you new static IP of the printer.

  If you are not familiar with this look of process for it in the printer manual.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Impossible operation completed (error 0 x 00000015). The device is not ready.

  Original title: error 0 x 00000015 device is not ready

  Impossible operation completed (error 0 x 00000015) device is not ready. How I solve this problem, because I was able to print, but I have try several changes and no response arises. What comand should do to eradicate the shield and let me sacanning my documents.

  Hi pauloftarse,

  When exactly do you get this error message?

  Microsoft has confirmed that this error can be ignored.

  See the article below

  Windows 7 '0 x 00000015 Error' when it cancels a scan operation.

  http://support.Microsoft.com/kb/2018464

• Windows can't open add printer. Impossible operation completed (error 0x000000c1)

  When I try to "Add a printer" in the Panel in Windows 7, I have "Windows can't open add printer." Impossible operation completed (error 0x000000c1). »

  I uninstalled all the other printer drivers (I'm pretty sure. How can I know?).

  It's an all-in-one HP Officejet Pro 8600, and I can use the scanner very well. I can't add the printer.

  Thanks for responding!

  I tried several solutions and searched many forums. This has actually been a problem for some time now, and I do not know what facilities of printer driver broke.

  I did put a lot of thought into it and just posted stuff to the network and printed one of my other computers. It became a problem recently, when I was too lazy to get up and turn on one of the other computers. :-) I then decided that I just needed to fix it.

  I read all the posts I could find for each version of Windows treats this problem and tried each of them. I removed all the old drivers (at least I think I did. I couldn't find anybody would say, 'Here are the drivers installed.'). I downloaded the new drivers from HP. I edited the registry. I went to the folder/Windows/System32/Spool/something and deleted all. I searched all references to Lexmark (my old printer) and deleted.

  In any case, last night my boot sector failed, so I ended up reinstalling Windows. I just finished now, and the printer works fine, now.

  No,

  PS I'm sorry that this thread will be of no use to any person responsible research. I found a lot of them, too.

• Control Panel / devices and printers, click the printer, get an error message "impossible operation completed (error 0 x 00000005).» Access is denied?

  does anyone know why when I go into Control Panel / devices and printers, I click on the printer I want and you get an error message "impossible operation completed (error 0 x 00000005).» Access is denied? I can't change the owner, or delete or something. Help, please!

  So far, I found all these shapes to be completely useless and a waste of time. I found out how to fix this and it looks like that many people would have put me the answer out there because nobody else will or knows it.

  -Start

  -Explorer window

  -C:\windows\system32\spool\PRINTERS

  And

  -C:\windows\system32\spool\DRIVERS

  -Right click on a folder at a time and select Properties, then on the Security tab and add the user you want to grant access to print and check that the 'Total control' box is checked. If the user name is already there, check the box "total control".

  -Note: Never simply put the group "Everyone" it as it will cause problems if you use a vulnerability scanner.

  It was on a Windows 7 operating system.

  Who should do this; Well it worked for me at least.

  Thanks for nothing, Microsoft and all the people here! ***

• M276 - Win7 - cannot install the printer. Impossible operation completed (error 0x000003eb)

  Hello

  I have encountered this same problem after charge a laptop Win7 twice.  When the problem occurs, the laptop is impossible to install any printer object on the machine of any provider in the field of devices and printers.  We use the latest solution of complete software from HP.com.  It is a USB printer installation situation.

  The scanner and fax functions are able to install without problem in Device Manager.  We can run the scanner with the HP software without any problems.  However, the print in Device Manager device remains in the category other devices and fails to install every time.

  Anyone has any ideas on where to start for this one?  See the attachment for a screenshot of the error when executing addition MS one assistant of the printer.

  I was able to solve the problem for now.

  We tried a number of solutions:

  1 Add/Remove from Device Manager

  2 Add/Remove tab of device drivers drivers and printers

  3. Uninstall and reinstall with the latest software

  4 charge the laptop

  5 disable HP Smart Install

  6. create alternative USB printer objects in devices and printers

  7. Mrs. FixIt 50979 and 50984

  What ended by us to install the object HP Printing in Device Manager is a manual cleaning of the two areas.  Once these areas have been cleaned for restart us the print spooler, manually pointed objects in the Device Manager for the the driver files on the machine and finished the installation wizard triggered AutoRun automatically power off.

  We have removed all the contents of this folder:

  C:\Windows\System32\Spool\Drivers\w32x86\3

  We have also removed all HP registry entries in this area:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3

  It was of course a pain in coming to this conclusion, but at least my user works again and be able to print.  Time will tell whether or not something will come and corrupting its Setup again.

• Windows Defender encountered an error: 0x800705b4. This operation completed because the time-out period night.

  Hello

  I'm a Microsoft Online Customer Service, which contacts on behalf of my client. It lights its Windows Defender and received this error message below:

  «Windows defender encountered an error: 0x800705b4.» This operation completed because the time-out period night. »

  Hello

  ·         You have a third-party security software installed on the computer?

  Method 1:

  If so then try to disable the antivirus and then check to see if you can turn on Windows Defender.

  You can check this link for more information on turn Windows Defender on or off: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Defender-on-or-off

  Note: Make sure that you enable the antivirus once you are finished with the test. If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355

  Also, try the steps in this article: Impossible to activate the application Windows Defender in Windows Vista

  Method 3:

  Try to restart the Windows Defender service and check if it helps.

  a. Click Start on the start menu, search type services.msc and press ENTER.

  b. in the services window, locate Windows Defender service in the services list.

  c. check that the status is started. If the condition column is blank, right-click on the service and select start.

  d. If you get error trying to force start the Windows Defender service, try to change the Startup Type to automatic and restart the computer.

• the operation could not be completed error 1035 com.apple.mobilephone

  I have phone 7 and a mistake on putting in place the reception of voice mail

  the operation could not be completed error 1035 com.apple.mobilephone

  Same error message, even tried operation. iPhone 6, iOS 10.0.1

• Change the error message by default printer 'Operation could be completed (error x 00000709).

  Original title: arthcua

  I'm changing my printer canon pixma canon pixma mp287 2700 tp fr..  I have already install the power driver of the company.  test print, scan succesfull.

  I'm now chanding pixma mp287 but unluckly that he will not change the default printer. When I right click on the printer pixma mp287 icon to install.  A State of error message "the operation could be completed (error 0 x 00000709).» Double check the name of the printer and make sure that the printer is connected to the network.  The name of the printer is correct and that the printer is connected to the printer.
  What is the solution.
  Thank you.
  ArthCua

  Hi ArthCua,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2. is the computer connected to a network domain?

  You must enable WIA - Windows Image Acquisition. Now to do these following steps.

  a. click Start and type services.msc in the search box

  b. Locate the service:

  Remote procedure call (RPC)

  DCOM Server process Launcher

  RPC end point mapper

  Detection material core

   

  Make sure that the Startup type is Automatic.  Steps to set the auto services

  c. search for the service

  d. right-click on the service

  e. If the service is stopped and then Start the service

  f. Select Properties

  g and in the Startup type , select Automatic

  Enable these services. To click directly on it, click Properties, and make it automatic. Once you turn on all the start them. After all the services are started, scroll to 'Windows Image Acquisition' this automatic too and start it. Just restart your PC and you should be good to ride.

  Hope that this information will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Impossible to completely uninstall Citrix Receiver. I get this error: the global path cannot be retrieved.

  Impossible to completely uninstall Citrix Receiver.  I get this error: the global path cannot be retrieved

  Hello
   
  The resolution of your problem is available on the Citrix Support Portal.

   
  Follow the instructions on how to manually remove the Citrix receiver:
  Link: http://support.citrix.com/proddocs/topic/receiver-30-windows/ica-install-manual.html
   
  For more information and help on the Citrix program deletion, please see Citrix forum
  http://forums.Citrix.com/support and ask your questions.
   
  Hope this information helps.

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.

• Loading of operating system error when trying to install Windows XP.

  Original title: error loading operating system.

  Loading operating system error on my screen when I turn on my pc. I used iolo car washer to wipe my hard drive and now I can't reinstall my operating system.

  Hi williamgrenz,

  This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows XP.

  You can follow this link completely & check if the problem persists.

  Error message "Error loading operating system" when you restart your computer during installation

  
  Reference: How to install or upgrade to Windows XP

  Hope the helps of information.
  Please post back and we do know.

• cannot answer with impatience or send new email, "windows live hotmail impossible to complete this application.

  I can't answer or send new email and the message "windows live hotmail impossible to complete this application.

  IE 9 running on the Vista operating system

  How is this related to Windows Update features, Marilyn?

  You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1

• test page, cannot print the operation fails (error 0 x 00000006)

  I can not print on a kyocera taskalfa 300i network. When I try to print a test page, I get the error next test page failed to print. operation can not be completed (error 0 x 00000006)

  read some info here (you may need to connect using any microsoft account):

  1. http://social.technet.microsoft.com/Forums/en-US/itprovistaprinting/thread/8eae0318-efc4-4087-91f9-3c27ad2ea4d6/

  Alternative workaround solution on another forum:

  Configuration and settings, then Control Panel then add a printer
  Choose "add a local printer. Click on "create a new port". Use the Local Port.
  Next dialog box is "Enter a Port name."
  Type the path to the printer: \\(computer name) \(printer name).

  It worked for me after MANY, MANY hours trying to do it by the "book".

  2. http://social.technet.microsoft.com/Forums/en/itprovistaprinting/thread/9c14dd83-2c71-45d3-8829-7e9cabb04d86

  or here in the microsoft community:

  3. http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/operation-failed-with-error-0x00000006-windows-7/3deb8c17-aa1d-40a1-bdad-20dc2c9cb3d0