Similar Questions

• Impossible to apply the update

  Automatic updates of Windows using these 4 security updates continually fails when you try to update - KB973705 KB974554, KB972580 KB974771.
  I used the automatic Windows update successfully for years.

  I was directed DIRECTLY download each update security - individually.
  I went to-http://www.microsoft.com/downloads/en/results.aspx?displaylang=en&freetext=security%20update
  and KB973705 KB974554, KB972580 KB974771 added one at a time
  in the search engine, then downloaded successfully on my desktop.

  I tried to use each installation file, and had all the programs are closed including antivirus programs.

  Every time that crosses the entire patch update process, and then at the end, I get this error message.

  IMPOSSIBLE TO APPLY THE UPDATE

  I try next?

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Also, visit the following link for more reference.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339/

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

  Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

  host is having above mess on summer please help on this

  I found the correct solution

  ESXi 5.1 U3 is the permanent fix for this issue

  U3 is fix

• transformada como apply the Furrier has an image

  Hola... Estoy taking una imagen en real tiepo y apply the fourier pero transformada qquiero no to connect los components of the imagen como con los fourier could someone help me...

  GRACIAS!

  Hola ylellan,

  Gracias por los foros Discusion of National Instruments, following use links you can be of utility:

  Destination IMAQ FFT image, help! -Discussion forums:

  https://forums.NI.com/T5/LabVIEW/IMAQ-FFT-destination-image-help/TD-p/842680

  Examples of Fast Fourier Transform (FFT):

  http://www.NI.com/example/27761/en/

  Saludos.

• Impossible to apply the resource of DRS

  The VI interface I have a yellow box on this node within a message saying:

  Impossible to apply settings of resource of DRS on the host 'XXXXX' (reason: a general error occurred: failure). This can drastically reduce the effectiveness of th DRS

  Here are my logs to vmkwarning (the end of the file):

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.482 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.02000b000060060e8005488c000000488c0000074e4f50454e2d56" Plugin "legacyMP" failed. Not supported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.483 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.02000b000060060e8005488c000000488c0000074e4f50454e2d56: unsupported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.483 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.02000b000060060e8005488c000000488c0000074e4f50454e2d56" Plugin "legacyMP" failed. Not supported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.020009000060060e8005488c000000488c000007284f50454e2d56: unsupported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.020009000060060e8005488c000000488c000007284f50454e2d56" Plugin "legacyMP" failed. Not supported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.020009000060060e8005488c000000488c000007284f50454e2d56: unsupported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.020009000060060e8005488c000000488c000007284f50454e2d56" Plugin "legacyMP" failed. Not supported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.485 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.020009000060060e8005488c000000488c000007284f50454e2d56: unsupported

  31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.485 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.020009000060060e8005488c000000488c000007284f50454e2d56" Plugin "legacyMP" failed. Not supported

  2 Jun 03:01:29 GQV00500 vmkernel: 83:17:07:32.631 cpu2:1036) WARNING: FS3: 3495: status bad003f cleaning HB

  Did you try this KB

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Impossible to apply the hyperlink to text

  I am new to Muse. Can someone tell me what I need to (see attached image). I want to apply the hyperlink to text elements and I do not understand how to change the text block to not require framing. Help, please.

  Chris

  

  The police or the police that you use in the paragraph where you try to make a hypertext link is a system font and not a "police Safe Web" or a police Tyepkit taken in charge.

  Unless you use a Web safe font or install that a Muse supported TypeKit fonts when designing or on your web page - Muse will turn these words into images in order to preserve their appearance (because not everyone has this font you like as above, installed on their computers), and since they have been transformed into images they can be used to make hypertext links.

  Secure Web fonts:

  http://www.speaking-in-styles.com/web-typography/Web-safe-fonts/

  http://www.WPDFD.com/issues/87/knowing_about_web_safe_fonts/

  Fonts taken Typekit support for Muse

  http://museinsider.com/how-to-add-Typekit-fonts-to-your-Muse-site.html

  http://TV.Adobe.com/watch/Adobe-inspire-magazine/using-Typekit-with-Adobe-Muse/

• Impossible to activate the correction lenses for images

  I try to get all the JPEGs, shot with a particular camera to have profile lens corrections applied to them. So with a jpeg that is selected in the development module I check on "Enable lens corrections" click setup and click "save new lens correction default profile." But it does not work. The next jpeg that I select is not activated lens corrections. Or it does not work if the setting to develop, I click on set default settings > update current settings. I think I have to activate the lenses to each image corrections. What I am doing wrong?

  Settings that you did for images should apply to others or the images differently than what I understand, you were doing:

  You say that you update to current settings >.

  This means that you update your lens correction parameters (that you developed earlier) with the parameters of the new image (which does not have lens applied correctioons).

  Instead, try the following - in the develop Module:

  Once you have the frame for a picture, select more images without deselecting the first image (ctrl + click on the images more).

  Your first image should have a light gray frame, other images, a slightly darker gray frame. This means that all images are selected, but your first image is active.

  At the bottom of the right pane, click . A dialog box appears that allows you to check the settings you want to apply to the other images.

  Check or anything that applies in the case of sub-options of lens correction.

  Click . Your lens correction should now be applied to other images - and also other parameters of development if you checked them.

  WW

• (Beginner) Impossible to validate the behavior of the form access

  I made html for about a month (and Dreamweaver so long too)
  
  In my first attempt to use Javascript, I cut and pasted many validation scripts Online and nothing has ever worked during their use in several fields. Then, I tried the behavior of the form validate exactly as described in a book by Dreamweaver and found the form to validate option is grayed out.
  
  The form is simple. I have two drop-down lists and a "submit" button. One of the lists is built using PHP. I tested the form without validation and it works fine.
  
  I also tried to add a new form and the validate option is available. It is as far as I'm away.
  
  I'm looking for some information as to why the option is grayed out. Who can tell me why the other scripts did not work.
  
  Thanks in advance for any ideas.
  
  ==============================

  Thanks for your help Murray,

  When I say 'By the Book' I speak somewhat metaphorical. But the steps I mentioned are in Teach Yourself Dreamweaver of the Sam in 24 hours (a popular book by a popular editor).

  Similarly, if (using the toolbar for simplicity and accuracy) you create a form, add a text field inside, and then add a button "submit" on the inside, you can select the button in design mode and then the option validate form will be available.

  But more specifically, you can click anywhere in the body and the option is available and can be applied to any form on the page.

  When I add the other shapes on the page, the option validate form is available for them, but never available for the form that I originally listed here.

  Also, I have validated all the tags.
  ============================

  Now, before this announcement, I did several tests and found the answer. This function performs the validation of TEXT fields.

  Mystery solved!

• Impossible to apply the skin in Media Player

  original title: Media Player

  I downloaded the skin KENWOOD_MPXP 05/12/2012 to my Media Player but when I try to apply it to help the skin to apply using the selector appearance, it does not work. However, if I go to my downloads folder and open it from there, he will work until I go full screen. Then it still does not work and I have to repeat everywhere in the download process. What can I do to apply the skin of my Media Player?

  Hi TJ.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem while applying a skin for Windows Media Player.

  It would be awesome if you could answers to these questions in order to help you further.

  1. what version of Windows Media Player do you use?

  2. which version of the Windows operating system is installed on your computer?

  3. have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article.

  Windows Vista: Change the appearance of Windows Media Player by using skins: http://windows.microsoft.com/en-US/windows-vista/Change-how-Windows-Media-Player-looks-using-skins

  Windows 7: change the appearance of Windows Media Player by using skins: http://windows.microsoft.com/en-US/windows7/Change-how-Windows-Media-Player-looks-using-skins

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-Media-Player-11-unable-to-apply-downloaded/9c88a6a2-ab1e-41ca-AD68-f01ce9557ff9?page=1

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Impossible to apply the functional base index

  
  Hi gurus

  For my learning, I am applying the functional index of basic but looks like I'm doing something wrong, see below for my code and appreciate your answers.

  Code example

  DROP TABLE my_table;

  CREATE TABLE my_table

  (

  AA: PRIMARY KEY number 4

  aa_desc VARCHAR2 (30),

  aa_type VARCHAR2 (10)

  ) ;

  CREATE INDEX first_name_idx ON my_table (aa > 10 and upper (aa_desc) = "SA" and aa_type is null).

  Thanks in advance

  Concerning

  Shu

  SQL> create table my_table1
    2    (
    3      aa      number(4) primary key,
    4      aa_desc varchar2(30),
    5      aa_type varchar2(10)
    6    ) ;
  
  Table created.
  
  SQL> create or replace function my_table_check
    2  (
    3    p_aa      in my_table.aa%type
    4  , p_aa_desc in my_table.aa_desc%type
    5  , p_aa_type in my_table.aa_type%type
    6  )
    7  return number
    8  deterministic
    9  as
   10  begin
   11     if (p_aa > 10 and upper(p_aa_desc) = 'SA' and p_aa_type is null) then
   12       return 1;
   13     else
   14       return 0;
   15     end if;
   16  end;
   17  /
  
  Function created.
  
  SQL> create index my_table_idx on my_table1(my_table_check(aa, aa_desc, aa_type));
  
  Index created.
  
  SQL> explain plan for
    2  select *
    3    from my_table1
    4   where my_table_check(aa, aa_desc, aa_type) = 1;
  
  Explained.
  
  SQL> set linesize 130
  SQL> set pagesize 200
  SQL>
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------
  Plan hash value: 3962327877
  --------------------------------------------------------------------------------------------
  | Id  | Operation                   | Name         | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT            |              |     1 |    37 |     1   (0)| 00:00:01 |
  |   1 |  TABLE ACCESS BY INDEX ROWID| MY_TABLE1    |     1 |    37 |     1   (0)| 00:00:01 |
  |*  2 |   INDEX RANGE SCAN          | MY_TABLE_IDX |     1 |       |     1   (0)| 00:00:01 |
  --------------------------------------------------------------------------------------------
  Predicate Information (identified by operation id):
  ---------------------------------------------------
     2 - access("V195588"."MY_TABLE_CHECK"("AA","AA_DESC","AA_TYPE")=1)
  Note
  -----
     - dynamic sampling used for this statement
  
  18 rows selected.
  
  SQL>
  

• Impossible to apply the swf police embedded in the text in text layout

  Hello

  We have created a SWF for a police given (e.g., Calibri.swf) that contains all the styles (Regular, Italic, Bold, BoldItalic).

  We have created an xml that lists the name of the font and the path of the swf file. The names of xml is loaded into a drop-down list box in the application.

  When we try to apply the font selected in a text under text layout, it does the same. It sets the font to the font "Times" by default.

  Here is a snippet of code to apply the font for the text:

  private void selectFont(fontXML:XML):void {}
  var path: String = fontXML.@source;
  var myEvent:IEventDispatcher = styleManager.loadStyleDeclarations (FlexGlobals.topLevelApplication.url.substring (0, FlexGl obals.topLevelApplication.url.lastIndexOf("/"))+"/"+path);)
  myEvent.addEventListener (StyleEvent.COMPLETE, {function(event:StyleEvent):void}
  var editManager:EditManager = textFlow.interactionManager as EditManager;
  var itextLayout:TextLayoutFormat = new TextLayoutFormat();
  itextLayout.fontSize = 20;
  var fontName:String = fontXML.@name;
  Alert.Show (FontName);
  itextLayout.fontFamily = fontName;
  Alert.Show ("itext =" + itextLayout.fontFamily);
  editManager.applyFormat (itextLayout, itextLayout, itextLayout);
  var flowLeafElement:FlowElement = textFlow.findLeaf (editManager.anchorPosition) as element FlowElement.
  editManager.changeStyleName (fontName, flowLeafElement);
  });
  }

  Can someone please let us know what is missing in the implementation?

  Thanks in advance.

  Vikram

  Did you put the fontLookup in ITextLayoutFormat? It must be set to search for the police as an embedded policy. I think that, by default, it will consider it as a device font.

  -robin

• Impossible to apply the Animation of the title

  First Elements 8 don't apply animation title to a certain title.

  The same track contains a few other titles, to which I was able to apply the animation of the title without problem.

  I tried dragging the problematic title (in fact, problematic titles) to a separate track, but this does not solve the problem.

  Is there a solution/workaround?

  Is this a known issue?

  Where the problem comes not from?

  Two thoughts:

  (1.) you try to add a fade-in and an Animation of bland-out title to a title? If so, use Ctrl-K to cut your title into two pieces in the middle right. Add your choice of fade-in for the first, then your bland-out per second.

  2.) you have more than one line of text? Title Animations would apply ONLY to the line above. The way around this is to make a separate title for each line and place them above the other on different video tracks. Jose a limitation of entertainment title.

  Good luck

  Hunt

• Recordset disappears from the behaviors panel

  I came back to a page that was working fine when I downloaded it on my server.
  
  But somehow the number of records was not working. So I had a look at the file and it seemed fine.
  The only thing that was weird is that the server behaviors panel showed a small exclamation red on the side.
  
  And I noticed that was missing from the Recordset object.
  
  How can I get it back? I think that's the reason for which the meter does not work.
  
  The strange thing is that I always have the recordset in my code for the page.
  
  :'(
  
  @mysql_select_db ($database_db, $db);
  $query_jobs_locations = "SELECT city_name, count (jobs.job_id) as job_count.
  Of the city OF
  LEFT JOIN restaurants WE
  restaurants.rest_city = city.city_name
  LEFT JOIN jobs ON
  restaurants.rest_id = jobs.rest_id AND
  job_status = 'ON '.
  GROUP BY Francisco";
  $jobs_locations = mysql_query ($query_jobs_locations, $db) or die (mysql_error ());
  $row_jobs_locations = mysql_fetch_assoc ($jobs_locations);
  $totalRows_jobs_locations = mysql_num_rows ($jobs_locations);
  

  From my experience, this happens when you make corrections by hand and DW
  has no idea how to work with it.

  Most of my recordsets is this way because I use loads of store
  procedures and several vars DW not taking charge.

• Impossible to define the action of opening image/jpeg in Firefox

  I want to just open and display a jpg in a firefox tab, but instantly, link it asks me if I want to save or open by another application. Fine. I go into Options - handling jpg action change requests. There are 2 types of jpeg, one is "JPEG Image (image/jpeg) and the other"JPEG Image (text/html). I can change the action "text/html" to serve the action by default for Firefox, but for "image/jpeg", no matter how many times I tried, it just does not allow me to choose Firefox but any other actions or requests. Precisely, I choose Firefox in the 'Select Helper Application', but after I clicked 'OK', she returned to the old stock. I tried restarting Firefox and tried again, but not good at all. It frustrates me so bad.

  Are you sure that these images are to be sent with the right kind of MIME for images and not with the generic MIME type that makes Firefox view the 'Open with' dialog box?

  You can watch this extension:

  • Open in browser: https://addons.mozilla.org/firefox/addon/open-in-browser/

• Impossible to apply the update on June 21 [applications missing cloud desktop application tab]

  Notification of updates today (June 21). Now, my table CC doesn't have the applications tab. It is a change. I checked the preferences, but no indication as to how to recover the applications tab.

  I got a notification that updates are available, but I can't understand how to apply them. I updated several CC versions, but now the Apps tab went to CC, and I can't for the life of understand me what mantra I have to do to update.

  

  alfonsov31097035 wrote:

  Now, my CC array does not have the applications tab

  Try Adobe Creative Cloud Desktop App - Apps tab fix - YouTube