Impossible to catch the exception
Dear members,I have an OFA Page to which I attached an AM and CO.
In the AM of the page, I have the procedure defined below.
' public void notifyTLBC (param1, param2 String String)
*{*
OADBTransaction txn = getOADBTransaction();
CallableStatement cs = txn.createCallableStatement ("start myPLSQLProc(:1,:2); end; ", 2) ;
Try
*{*
cs.setString(1,param1);
cs.setString(2,param2);
DSI Execute();
DSI Close();
*}*
catch (SQLException a1)
*{*
System.out.println ("error in the procedure:" + a1);
throw new OAException ("error in procedure" + a1, OAException.ERROR);
*}*
*}*
I'm calling the procedure above from the CO and the procedure runs correctly.
But the problem is when there is no error in the procedure, it is not to throw any exception on the page. Simply, it is not executed in the background. Here my requirement is I want to show the error in the procedure for the user on the OPS Page.How form can only achieve?
Kindly please help me solve this.
Thanks in advance.
Best regards
Arun D. Reddy
Published by: Arun Reddy on January 11, 2011 11:30
If you are exceptions at the level of PL/SQL Management, then java code is unclear if PL/SQl procedure is completed successfully or not
following the instructions of AJ
best to keep a variable output
and set a value for the OUTPUT at the beginning of your procedure variable
ERROR: = 'NONE '.
and in the section of exception
WHILE OTHERS THEN
ERROR: = SQLERRM
and in your java code
get the registry to your variable out and get the value after execution
CS =
cs.registerOutParameter (3, Types.VARCHAR); DSI Execute(); setting of 3 assuming that your interior is VARIABLE Now if you write this code in a controller directly throw exception message if ValeurRet id no NONE Otherwise, if you write this in AM. Returns the value to the controller return ValeurRet Concerning
con.prepareCall (
ValeurRet = cs.getString (3);
Ravi
Tags: Oracle Applications
Similar Questions
-
How to catch the exception in the sliders
Hello
How to catch the exception no. DATA FOUND/other exceptions with the cursor
so 1234 is not in my table, how to trap this.could help me pleaseDECLARE CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234; BEGIN FOR i IN c1 LOOP DBMS_OUTPUT.PUT_LINE(i.ename); END LOOP; END;
Published by: user4587979 on 27 May, 2010 03:46Maybe it's
declare CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234; lemp c1%rowtype ; begin open c1; loop fetch c1 into lemp; exit when c1%notfound; DBMS_OUTPUT.PUT_LINE(lemp.ename); end loop; if c1%rowcount = 0 then raise no_data_found; end if; close c1; end;
-
Catch the Exception and continue
Hello
If the exception was framed but would like to continue anyway to another step (for example, Insert statement or create index)
< pre >
sql_stmt1: = 'DROP INDEX PRD_GLO_SDX;
EXECUTE IMMEDIATE sql_stmt1;
EXCEPTION
WHILE OTHERS THEN
raise_application_error (-20001, SQLERRM |) » '||' CANNOT DELETE THE INDEX OF PROBABILITY THAT THE INDEX MAY NOT EXIST");
< / pre >
Can anyone give advice on continue even if there is an exception?
See you soon.do not raise the exception, if you do not want.
sql_stmt1 :='DROP INDEX PRD_GLO_SDX'; EXECUTE IMMEDIATE sql_stmt1; EXCEPTION WHEN OTHERS THEN -- raise_application_error(-20001,SQLERRM||' '||'PROBABLITY INDEX CANT BE DROPPED AS INDEX MAY NOT EXIST'); null;
It is best to use a specific error to handle instead of the "catch-all", SO that OTHERS
-
Impossible to throw the Exception to the controller extended.
Hi all
I extend a controller in iProcurement. After calling super.processFormRequest, I want to throw the Exception of my custom code.
Here is the code I wrote. Everything works fine except... to display the error at the top of the page.
package xxtnt.oracle.apps.icx.por.req.webui;
Import oracle.apps.icx.por.req.webui.CheckoutSummaryCO;
Import oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean;
Import oracle.apps.fnd.framework.server.OADBTransaction;
Import oracle.apps.fnd.framework.webui.beans.OAWebBean;
Import oracle.apps.fnd.framework.OAApplicationModule;
Import oracle.apps.fnd.framework.webui.OAPageContext;
Import oracle.apps.ap.oie.webui.NavigationUtility;
Import oracle.jdbc.driver.OracleCallableStatement;
Import oracle.apps.fnd.framework.OAViewObject;
import com.sun.java.util.collections.ArrayList;
Import oracle.apps.fnd.framework.OAException;
import java.sql.SQLException;
import java.sql.Connection;
Import oracle.jbo.RowSet;
Import oracle.jbo.Row;
import java.sql.Types;
public class xxtntCheckoutSummaryCO extends CheckoutSummaryCO
{
private String clarityProjectId = new String("999999999");
private String productCode = new String("");
private String listOfProdCodes = new String("");
private String isClause = new String ("is");
private int noProdCodeCount = 0;
private int exceptionCount = 0;
private ArrayList peerException = new ArrayList();
' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processRequest (pageContext, webBean);
}
' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processFormRequest (pageContext, webBean);
pageContext.writeDiagnostics (this, "In custom controller to process form request", 6);
String s = pageContext.getParameter ("event");
pageContext.writeDiagnostics (this, "event is:" + s, 6);
If ((NavigationUtility.isNextClicked (pageContext)) |) ("save".equals (s)) | ("goto".equals (s)) | ("submit".equals (s)))
{
pageContext.writeDiagnostics (Thi, "Next/Save/Submit button..", 6);
OAMessageLovInputBean dffMessageBean = (OAMessageLovInputBean) webBean.findChildRecursive ("ReqHeaderDFF3");
if(dffMessageBean!=null)
{
pageContext.writeDiagnostics (this, ' dffMessageBean is not Null", 6");
String msg = (String) dffMessageBean.getValue (pageContext);
if(MSG!=null)
{
pageContext.writeDiagnostics (this, "value of FDF is:" + msg, 6);
clarityProjectId = msg;
OAApplicationModule am = pageContext.getRootApplicationModule ();
OAViewObject reqLinesVO = (OAViewObject) am.findViewObject ("PoRequisitionLinesVO");
if(reqLinesVO!=null)
{
rowCount int = reqLinesVO.getFetchedRowCount ();
pageContext.writeDiagnostics (this, "line lines Total" + rowCount, 6);
All lines rSet = reqLinesVO.getRowSet ();
for (int i = 0; i < rowCount; i ++)
{
Line linesRow = rSet.getRowAtRangeIndex (i);
if(linesRow!=null)
{
String reqLineId = linesRow.getAttribute("RequisitionLineId").toString ();
pageContext.writeDiagnostics (this, "The RequisitionLineId is:" + reqLineId, 6);
lineNumber int = Integer.parseInt (linesRow.getAttribute("LineNum").toString ());
VR;
{
OADBTransaction tr = am.getOADBTransaction ();
Connection con = tr.getJdbcConnection ();
OCs OracleCallableStatement = null;
String stmt = new String("");
stmt = "BEGIN LFIN_CA_CLARITY_TRX_EXT_OP. GET_PRODUCT_CODE(:1,:2,:3,:4,:5,:6); END; « ;
Co = (OracleCallableStatement) con.prepareCall (stmt);
ocs.setString(1,clarityProjectId);
ocs.setString (2, "999999");
ocs.registerOutParameter(3,Types.VARCHAR,0,255);
ocs.registerOutParameter(4,Types.VARCHAR,0,255);
ocs.setString(5,reqLineId);
ocs.setString(6,"IPR");
pageContext.writeDiagnostics (this, "before you run the prod code is" + productCode, 6);
OCS. Execute();
productCode = ocs.getString (3) m:System.NET.SocketAddress.ToString ();
listOfProdCodes = ocs.getString (4) m:System.NET.SocketAddress.ToString ();
}
catch (SQLException e)
{
pageContext.writeDiagnostics (this, "Exception when calling the package of prod Code/Code" + e.getMessage (), 6);
}
pageContext.writeDiagnostics (Thi, "prod package after call Code is:" + productCode, 6);
If (listOfProdCodes.length () > 4)
{
isClause = 'y ';
pageContext.writeDiagnostics (Thi, "isClause =" + isClause, 6);
}
pageContext.writeDiagnostics (this, "after the list run Codes Prod is" + listOfProdCodes, 6);
If (ProductCode.Equals ("zzxxxxxzz") & & (listOfProdCodes.equals ("zzxxxxxzz")))
{
noProdCodeCount = noProdCodeCount + 1;
}
Another yew (productCode.equals ("zzxxxxxzz") & & (! listOfProdCodes.equals ("zzxxxxxzz")))
{
peerException.add (new OAException ("Line"
+ lineNumber
+" - "
+"Product code is invalid. The product code valid for project.
+ clarityProjectId
+ isClause
+ listOfProdCodes
+"\n"));
pageContext.writeDiagnostics (, "Sunrise should prod valid error codes", 6);
exceptionCount = exceptionCount + 1;
}
on the other
{
pageContext.writeDiagnostics (this,"ProdLine is equal to the Prod Code... The success of the validation. FRO... Line. "+ lineNumber, 6);
pageContext.writeDiagnostics (this, "" == > Unexpected < == "")
+"Line number"+ lineNumber
'Product code' + productCode
+ "List of product codes '+ listOfProdCodes
(6);
}
} / / closing line! = null
} / / Closed loop
} / / closing if Vo! = null
if(noProdCodeCount>0)
{
peerException.add (new OAException ("no product code has been defined for the clarity project ID" + clarityProjectId));
exceptionCount = exceptionCount + 1;
}
} / / closing projectid clarity! = null
pageContext.writeDiagnostics (this, "number of Exception is:" + exceptionCount, 6);
if(exceptionCount>0)
OAException.raiseBundledOAException (peerException);
} //Closing
}
}
}
Page: / oracle/apps/icx/por/req/webui/CheckoutSummaryPG
I commented all the code and just try to throw the exception using the throw new OAException ("Test Exception msg");
After super.processFormRequest, yet his watch no any which exception in page.
Help please..!
Thank you
Ganga RamHello
Use the following syntax
pageContext.putDialogMessage (message);
pageContext.forwardImmediatelyToCurrentPage (null, true, null);Thank you
Rakesh -
DBAdapter: Impossible to catch "the database host is down" scenario as a flaw
Hello
I use a DBAdapter and try to test the scenario when the database is out of service.
I have attached a tote within reach with the "systematically" to the DBAdapter and since he did not work an explicit fault Manager Catch so trying to catch a "remoteFault" with the data from the fault to be captured in a variable 'RuntimeFault' to type 'RuntimeFaultMessage '.
The problem is that my fault handlers intercept not defects, and I get an errors of ORABPEL-11622/08033/05002 as pasted below:
-----
< 2009-04-15 18:47:39, 824 > < INFO > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - connection using JCA Pool - size = < unbounded > max
< 2009-04-15 18:47:39, 824 > < WARN > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - search for "ist/DB/Unknown" JNDI has no reason to: eis/DB/Unknown not found
< 2009-04-15 18:47:39, 824 > < INFO > < default.collaxa.cube.ws > < AdapterFramework::Outbound > as unable to locate the JCA resource adapter deployed to "ist/DB/Unknown", then will attempt to instantiate ManagedConnectionFactory oracle.tip.adapter.db.DBManagedConnectionFactory directly.
< 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.ws > < database Adapter::Outbound > < oracle.tip.adapter.db.DBManagedConnectionFactory acquireSession > cannot generate the TopLink Session
< 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - could not invoke operation "BPEL_DBLogger" against the "data adapter" due to:
ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002.
< 2009-04-15 18:48, 808 > < logging INFO level > < default.collaxa.cube.ws > < AdapterFramework::Outbound > complete change for Logger "default.collaxa.cube.ws" Debug to see the error stack
< 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - backward JCA LocalTransaction
09/04/15 18:48 - __callback exception Caught class com.collaxa.cube.ws.WebServiceException
< 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube > < BaseCubeSessionBean::logError > error when calling bean cube"delivery": EJB Transaction error.
Exception of EJB that happened during the call to the partner.
Please check service partners.
ORABPEL-08033
EJB Transaction error.
Exception of EJB that happened during the call to the partner.
Please check service partners.
at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:576)
at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:416)
at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:222)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:736)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:371)
at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5244)
at com.collaxa.cube.engine.CubeEngine.callbackPerformer(CubeEngine.java:1917)
at com.collaxa.cube.engine.delivery.DeliveryHelper.callbackPerformer(DeliveryHelper.java:788)
at com.collaxa.cube.engine.delivery.DeliveryService.handleCallback(DeliveryService.java:778)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleCallback(CubeDeliveryBean.java:369)
at sun.reflect.GeneratedMethodAccessor96.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
at java.security.AccessController.doPrivileged (Native Method)
at javax.security.auth.Subject.doAs(Subject.java:396)
at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeDeliveryBean_LocalProxy_4bin6i8.handleCallback (unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessageHandler.handle(CallbackDeliveryMessageHandler.java:49)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at sun.reflect.GeneratedMethodAccessor32.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
at WorkerBean_EndPointProxy_4bin6i8.onMessage (unknown Source)
at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - SISM JCA Execute of 'BPEL_DBLogger' failed due to the operation: could not create/access the TopLink Session.
This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
; nested exception is:
ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002.
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:631)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:726)
at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:425)
... more than 57
Caused by: ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002.
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:362)
at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:171)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:598)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:351)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:222)
at oracle.tip.adapter.db.DBInteraction.executeStoredProcedure(DBInteraction.java:971)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:218)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:480)
... more than 59
Caused by: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002
at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:276)
at oracle.tip.adapter.db.toplinkext.Oc4jDefaultConnector.connect(Oc4jDefaultConnector.java:101)
at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:197)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:220)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:273)
at oracle.toplink.threetier.ConnectionPool.buildConnection(ConnectionPool.java:82)
at oracle.toplink.threetier.ConnectionPool.startUp(ConnectionPool.java:304)
at oracle.toplink.threetier.ServerSession.connect(ServerSession.java:435)
at oracle.toplink.publicinterface.DatabaseSession.login(DatabaseSession.java:503)
at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:858)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:373)
... 64 more
Caused by: java.sql.SQLException: IO exception: the network adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:287)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
to oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:430)
to oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.tip.adapter.db.toplinkext.Oc4jDefaultConnector.connect(Oc4jDefaultConnector.java:71)
... more than 74
< 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.engine.dispatch > < DispatchHelper::handleMessage > to not handle the message
java.sql.SQLException: IO exception: the network adapter could not establish the connection
at com.collaxa.cube.ejb.impl.BaseCubeSessionBean.checkIfFatalConnectionError(BaseCubeSessionBean.java:196)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleCallback(CubeDeliveryBean.java:383)
at sun.reflect.GeneratedMethodAccessor96.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
at java.security.AccessController.doPrivileged (Native Method)
at javax.security.auth.Subject.doAs(Subject.java:396)
at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeDeliveryBean_LocalProxy_4bin6i8.handleCallback (unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessageHandler.handle(CallbackDeliveryMessageHandler.java:49)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at sun.reflect.GeneratedMethodAccessor32.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
at WorkerBean_EndPointProxy_4bin6i8.onMessage (unknown Source)
at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: IO exception: the network adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:287)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
to oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:430)
to oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.tip.adapter.db.toplinkext.Oc4jDefaultConnector.connect(Oc4jDefaultConnector.java:71)
at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:197)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:220)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:273)
at oracle.toplink.threetier.ConnectionPool.buildConnection(ConnectionPool.java:82)
at oracle.toplink.threetier.ConnectionPool.startUp(ConnectionPool.java:304)
at oracle.toplink.threetier.ServerSession.connect(ServerSession.java:435)
at oracle.toplink.publicinterface.DatabaseSession.login(DatabaseSession.java:503)
at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:858)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:373)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:351)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:222)
at oracle.tip.adapter.db.DBInteraction.executeStoredProcedure(DBInteraction.java:971)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:218)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:480)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:726)
at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:425)
at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:416)
at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:222)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:736)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:371)
at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5244)
at com.collaxa.cube.engine.CubeEngine.callbackPerformer(CubeEngine.java:1917)
at com.collaxa.cube.engine.delivery.DeliveryHelper.callbackPerformer(DeliveryHelper.java:788)
at com.collaxa.cube.engine.delivery.DeliveryService.handleCallback(DeliveryService.java:778)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleCallback(CubeDeliveryBean.java:369)
... more than 42
< 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.engine.dispatch > < BaseScheduledWorker::process > is not to manage the exception ORABPEL-05002 message sending...
Handle error message.
An exception occurred while trying to process the message 'com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessage '; the exception: IO exception: the network adapter could not establish the connection
ORABPEL-05002
Handle error message.
An exception occurred while trying to process the message 'com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessage '; the exception: IO exception: the network adapter could not establish the connection
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:171)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at sun.reflect.GeneratedMethodAccessor32.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
at WorkerBean_EndPointProxy_4bin6i8.onMessage (unknown Source)
at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
-----
To simulate that my database is down, my DBAdapter wsdl I put my < jca:address > section as:
-----
< jca:address location = ' ist/DB/Unknown"UIConnectionName ="BPEL_DB_Server ".
ManagedConnectionFactory = "oracle.tip.adapter.db.DBManagedConnectionFactory"
MCF. DriverClassName = "oracle.jdbc.OracleDriver"
MCF. PlatformClassName = "oracle.toplink.internal.databaseaccess.Oracle9Platform"
MCF. ConnectionString="jdbc:oracle:thin:@172.16.205.120:1522:ETGLIT".
MCF. UserName = "owf_mgr_temp".
MCF. Password = "867BD34C5AE6EF60BEC0F888655A72920D60DCB1D74A4B78" / >
-----
Since then, there is no location "eis/DB/Unknown" Bpel would use other attributes defined here to connect to the database. But the IP database I specified here is incorrect to make sure that DBAdapter fails to connect.
Now, I received the error "Network adapter could not establish the connection" but it appears in my logs to opmn with the above pasted stack trace. Why am I unable to catch this problem of connectivity as a bpelx:remoteFault in my capture explicit or CatchAll?
Help, please!
Kind regards
RaviI am surprised as well. I see you're on 10.1.3.1. There are a lot of problems with the DB adapter in this version. I suggest either install the following hotfixes or upgrade to 10.1.3.3 or 10.1.3.4 (recommended)
What happens to the BPEL process, do go to manual recovery? Or just fail. Are you sure that the Tote was beyond the scope of the DB adapter. Have you implemented several scopes?
see you soon
James2617419
5877231
5838073
5841736
5905744
5742242
5729652
5724766
5664594
5965376
5672007
6033824
5758956
5876231
5900308
5915792
5473225
5853207
5990764
5669155
5149744 -
Impossible to catch the flaws of business using the strategy of fault
Hi all
I'm coming down for lack of business in politics of the fault. I'm not able to save the details of the company's fault. Here are the details-
Lack of exercise using the Throw activity - Code below
< fault > < part xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" name = "payload" > < ip:error xmlns:ip = "http://xmlns.oracle.com/BPELProcess5" > invalidPayload < / ip:error >
< / piece > < / failures >
Section faults defined in the strategy of fault
< faultName xmlns:ip = "http://xmlns.oracle.com/BPELProcess5" name = "ip:invalidPayload" >
< condition >
$fault.payload / ip:error = "invalidPayload < test >" < / test > "
< Ref action = "ora-java" / >
< / condition >
< / faultName >
Is a synchronous process. Politics of fault works for RemoteFault and BindingFault. Am I missing something here?He does... Just throw the process2 back on the partnerlink client company's fault... and on the invoke of termpol1 you can "take" with use of the framework
-
How to manage the plsql error occurring in the exception block
We know how to manage exceptins located in the BEGIN block.
But I am unable to catch the exception in the exception block. Write an erroeneous code so that the control will go to the exception block and there is also a plsql error, but I am unable to handle that error, it returns the error to the calling environment.
DECLARE
CNT NUMBER (5): = 0;
BEGIN
Select "Chris" IN double's NTC;
DBMS_OUTPUT. Put_line (to_char (CNT));
EXCEPTION
WHEN invalid_number CAN
DBMS_OUTPUT. Put_line (' error occurred inside the start block ');
CNT: = "deba";
WHILE OTHERS THEN
DBMS_OUTPUT. Put_line (' error occurred inside the start block ');
END;
Please suggest me how to catch this exception?Hello
DECLARE
CNT NUMBER (5): = 0;BEGIN
Select "Chris" IN double's NTC;
DBMS_OUTPUT. Put_line (to_char (CNT));EXCEPTION
WHEN invalid_number CAN
DBMS_OUTPUT. Put_line (' error occurred inside the start block ');CNT: = "deba";
WHILE OTHERS THEN
DBMS_OUTPUT. Put_line (' error occurred inside the start block ');END;
First of all your exception mouhamadou who you have sent i.e. invalid_number itself does not.
You should use named exception VALUE_ERROR to catch the exception in the main block.SQL> DECLARE 2 cnt NUMBER(5):=0; 3 BEGIN 4 select 'debalina' INTO cnt from dual; 5 DBMS_OUTPUT.PUT_LINE(to_char(cnt)); 6 EXCEPTION 7 WHEN Invalid_number THEN 8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block'); 9 end; 10 / DECLARE * ERROR at line 1: ORA-06502: PL/SQL: numeric or value error: character to number conversion error ORA-06512: at line 4 SQL> DECLARE 2 cnt NUMBER(5):=0; 3 BEGIN 4 select 'debalina' INTO cnt from dual; 5 DBMS_OUTPUT.PUT_LINE(to_char(cnt)); 6 EXCEPTION 7 WHEN VALUE_ERROR THEN 8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block'); 9 end; 10 / error has occured inside main block PL/SQL procedure successfully completed.
Your doubts regarding catch the exception in the exception block, you can run as below, by nesting a block Begin in the exception block itself.
SQL> DECLARE 2 cnt NUMBER(35):=0; 3 BEGIN 4 select 'debalina' INTO cnt from dual; 5 DBMS_OUTPUT.PUT_LINE(to_char(cnt)); 6 EXCEPTION 7 WHEN Value_error THEN 8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block'); 9 Begin 10 cnt:='deba'; 11 Exception 12 WHEN OTHERS THEN 13 DBMS_OUTPUT.PUT_LINE('error has occured inside exception block'); 14 End; 15 END; 16 / error has occured inside main block error has occured inside exception block PL/SQL procedure successfully completed.
Hope your question is clear.
:)
Twinkle -
View the exception details message in af:messages
Hello!
I use BC ADF 10.1.3.3. I created an event to support bean that calls the Row.validate () method as before I call commit, I want to ensure that all validation is passed or the user is redirected to another page without committing the changes. Well, after the call to Row.validate I catch the exception. But the problem I faced is I want to display the detailed message for the detected exception that contains the actual commit message that I set on the layer model. If I use only Exception.getMessage () I get the Houston-27024: could not validate a row with... message.
But using the Exception.printStackTrace I can see in output JDeveloper console something like this:
oracle.jbo.RowValException: 27024-Houston:
+...+
+ java.lang.Thread.run(Thread.java:595) +.
+ # # 0 in detail.
oracle.jbo.RowValException: THE ACTUAL COMMIT MESSAGE I DEFINED ON the LAYER MODEL
+ oracle.jbo.rules.RulesBeanUtils.raiseException(RulesBeanUtils.java:206) +.
+...+
Is there a way I could get the message detail 0 in my Catch block in the bean to support? I thought that using getStackTrace could help, but there are only records of "+ java.lang.Thread.run(Thread.java:595) + ' and not retail 0 part.
I hope my question is clear and there may be another approach to achieve this goal.
I'm doing it since the opening of the jspx consists of all the attributes of the line of the VO, but on the layer of model validation is performed on these attributes, anyway. I therefore need to display a massage that the process cannot be completed and it would be great to see the real problem instead of the Houston-27024 message.
Thank you in advance,
Kind regards!
BBHi BB,
Have you tried to call getExceptions() on the exception of Houston?
John
-
Delete the exception management
Hi guys,.
I have a problem in my procedure. There are 3 parameters that I'm passing in the procedure. I am corresponding to these parameters to those of the table to delete one record at a time.
For example if I want to delete the record with the values (' '900682', 3, July 29, 2008 ') as parameters, it deletes the record of table, but still when I run it with the same parameters must show me an error message but it again says "deleted the request for transcript...". "Can you please help me with this?
PROCEDURE p_delete_szptpsr_1 (p_shttran_id IN saturn.shttran.shttran_id%TYPE,
p_shttran_seq_no IN saturn.shttran.shttran_seq_no%TYPE,
p_shttran_request_date IN saturn.shttran.shttran_request_date%TYPE) IS
BEGIN
DELETE FROM saturn.shttran
WHERE shttran.shttran_id = p_shttran_id
and shttran.shttran_seq_no = p_shttran_seq_no
and trunc (shttran_request_date) = trunc (p_shttran_request_date);
DBMS_OUTPUT. Put_line (' removed the transcript request Seq No. (' | p_shttran_seq_no | student (' | p_shttran_id |') for the requested date (' | p_shttran_request_date |'))) ') ;
COMMIT;
EXCEPTION WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT. Put_line (' error: the Notre Dame provided = student ID (' | p_shttran_id |))
('), Transcript No Request = (' | p_shttran_seq_no |) ('), Ask Date = (' | p_shttran_request_date | not found.');
END p_delete_szptpsr_1;
I have a SELECT statement to use NO_DATA_FOUND?A DELETE statement that will remove any line (such as an UPDATE statement that updates no line) is not an Oracle error. Oracle throws no exceptions.
If you want your code throws an exception, you will need to write this logic. You can throw an exception NO_DATA_FOUND yourself, i.e.
IF( SQL%ROWCOUNT = 0 ) THEN RAISE no_data_found; END IF;
If you go just to catch the exception, however, you could just some embedded code you would use to handle the exception in your IF statement, i.e.
IF( SQL%ROWCOUNT = 0 ) THEN <
> END IF; In your original code, your exception handler is just a statement of DBMS_OUTPUT. It is incredibly dangerous in real production code. You rely on the fact that the customer has allowed him to exit, that the customer has allocated a sufficient buffer, the user will see the message, and that the procedure will never be called to any piece of code that never worry if it succeeded or failed. There are very few situations where those who are sure of things to build on.
Justin
-
the exception in the procedure call management
Hello
I have a package where currently make phone calls to private public process procedures.
and the senario is: -.
create package body p_tst
is
ex_failed exception;
-It's private proc
procedure p_private
is
Start
.
.
raise ex_failed;
exception
When ex_failed
then
lift;
.........
end p_private;
procedure p_public
is
Start
....
-nomaking appeal to the private sector
-procedure
p_private;
-Here, I need to catch
-the exception thrown
-past of callee
-procedure
When ex_failed
...
end p_public;
end;
Basically, I want to catch any exception of procedure called passed to the procedure call and raise the same exception by calling procedure.
is it possible to intercept the exception even in the calling procedure?Yes, p_private throws the exception, it will be taken by p_public and the program stops after dbms_output.
-
iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone. Male/female connection not relieve tight. Advice\help would be appreciated.
Try a different cable - preferably a certified one MFI
If this does not work
Please take a genius appointment at an Apple Store, or select another authorized service provider.
-
Original title: the exception unknown software exception (0xc0000417) occurred in the application at location 0x6682baf7
When I had installed Bitdefender total security 2013, the above message was quick and have you installed either. I tried to uninstall with the Bitdefender uninstall tool and reinstalled again but the problem is to stay the same. Please someone help me?
Hello
1. how you try to install Bitdefeneder?
2. is this issue only occurs when installing Bitdefender?
3. have you made changes on the computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can read the article and see if it helps.
Installation of your Bitdefender product
http://www.BitDefender.com/support/installing-your-BitDefender-product-1024.html
I can't connect to Internet
http://www.BitDefender.com/support/I-cannot-connect-to-the-Internet-865.html
Method 2
Check to see if the problem exists in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Previous post your answer for you help in this matter.
-
None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have.
How can I fix this?
I use the SHIFT + F7 work much and would really appreciate help in getting up and running.
Thank you
Check if you have an F LOCK key in the top right of your keyboard.
If this is not the case, try a system restore:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
Mick Murphy - Microsoft partner
-
Please help; Impossible to change the position of my wallpaper!
I know this isn't a big problem; but I would like it's working properly anyway. I tried a new image for my wallpaper, and it showed as an image full screen. I didn't like it then, immediately, I went back to the original image, and it was too full screen. I went to the desktop background and the position is as I've had with a frame black (I also tried other colors) around the image, but it was not of themselves. I tried all the different positions and nothing will change. The image will change, but any image I try is full screen.
Hi Newsie,
You can try the following steps and check.
Method 1:
You can read the following article and try the methods provided except method 6 and see if it helps.
Impossible to change the background image in Windows 7
Note: This article also applies to Windows Vista.
Method 2:
You can also try to change the theme of Windows and check.
-
FileConnection Connector.open throws the exception on Blackberry 7 when there is no file
I'm trying to run a program I developed on Blackberry 6 on the torch 9801 running Blackberry 7. When I try to open a folder that doesn't exist isn't using FileConnection Connector.open Blackberry 7 to launch a 1003 error. Under 6 Backberry, no exception is thrown, and I could use the FileConnection.exists () function to determine if the file exists. The directory, I'm trying to reference/store/home/user/IUIDChecker/my code below:
private void createresultdirectory(String result_path) { try { // the final slash in the folder path is required FileConnection fc = (FileConnection)Connector.open("file:///" + result_path, Connector.READ_WRITE); // If no exception is thrown, the URI is valid but the folder may not exist. if (!fc.exists()) { fc.mkdir(); // create the file if it doesn't exist } fc.close(); _currentPath = result_path; } catch (IOException ioe) { Dialog.alert("Error: " + ioe.getMessage()); } }
I found the problem. The error only occurs when I am runing through the debugger and I select USB key when I connect to my PC. If I select Media Sync, the exception is not thrown.
Maybe you are looking for
-
How can I manage or remove synchronization words password or auto-fill tables?
Firefox sync has been updated for Firefox now. How to manage the information synchronize us every day? I want to delete some of them, but I don't have access to this information. Thank you very much.
-
According to my recent post on getting up and running with the NI PCIe-1433 camera link card, I ran into a bit of a snag. When you use the internal trigger on the camera, everything works 100%. I can view all the data from the camera in MAX as well a
-
Remote Desktop for Mac will not use the printer driver
On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I n
-
My Dell E510 has a mirror of the main C: drive and D: drive backup I want to reformat. How can I do this? Note: Drive D: 'properties' shows only 18 GB of capacity, but physical drive Specifies a size of 80 GB. What's up with that?
-
Recover Google Chrome uninstall.
Hi, I installed Google Chrome and decided to uninstall it. I reset IE8 to its values by default and all seems OK with a GLARING question! It seems that if I click on a hyperlink in Outlook 2007, I get this funky error message:"This operation has be