View the exception details message in af:messages

Similar Questions

• JSF/ADF offers all mechinism to manage the exception/error message

  What Struts has everything simply.
  
  Thank you!
  
  Kevin.

  Kevin,

  Describe what you mean by ' exception/handle error message', and we will be able to direct you.

  JSF has a standard mechanism to manage the display of messages (the java class FacesMessage and the component of message/messages). ADF Faces, extends the display of messages with an af:messages component. The layer of ADF business components provides a framework for the removal of errors (and their grouping together so that you get all of your messages at once instead of one-at-a-time validation).

  If you can explain what you are looking for, perhaps we can give you more detailed information.

  John

• Save the exception error message

  Hi all
  Take into consideration the following:

  create table WXX_TEST
  (
    ID    NUMBER,
    COL1  VARCHAR2(5),
    COL2  VARCHAR2(25),
    ERRMS VARCHAR2(4000)
  )

  create table WXX_TEST2
  (
    ID   NUMBER,
    COL1 VARCHAR2(25),
    COL2 VARCHAR2(4)
  )

  insert into wxx_test (ID, COL1, COL2)
  values (1, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (2, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (3, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (4, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (5, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (6, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (7, 'AA', 'CCCCCCCCCCCC');
  
  insert into wxx_test (ID, COL1, COL2)
  values (8, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (9, 'AA', 'BB');
  
  insert into wxx_test (ID, COL1, COL2)
  values (10, 'AA', 'BB');

  so... we're going to do the following:
  

  declare
  
    cursor c is select id,col1,col2 from wxx_test;
  
    type t_a is table of c%rowtype;
    l_msg  VARCHAR2(4000 CHAR);
    dml_errors EXCEPTION;
    PRAGMA exception_init(dml_errors, -24381);
    l_errors number;
    l_errno  number;
    l_idx    number;
    v_a t_a;
  
  begin
    
      open c;
      loop
        begin
           fetch c bulk collect 
            into v_a limit 10;
         forall i in 1..v_a.count save exceptions
         
                insert /*+APEND_VALUES*/
                 into wxx_test2
                 values v_a(i);
                 
                 
        exception when dml_errors then
            l_errors := SQL%bulk_exceptions.count;
            FOR ii IN 1 .. l_errors LOOP
              l_errno := SQL%BULK_EXCEPTIONS(ii).error_code;
              l_msg   := SQLERRM(-l_errno);
              l_idx   := SQL%BULK_EXCEPTIONS(ii).error_index;
              
              update wxx_test
               set ERRMS =  l_msg || ': ' || l_errno
               where id = v_a(l_idx).id;
            end loop;
            
         end;   
      exit when c%notfound;
      end loop;
     close c;
  
  end;
  /

  .. .and query the wxx_test table:

  select * from wxx_test  where id = 7 

  The result is:

         ID COL1                 COL2                                                                             ERRMS
  ---------- -------------------- -------------------------------------------------------------------------------- --------------------------------------------------------------------------------
           7 AA                   CCCCCCCCCCCC                                                                     ORA-12899: value too large for column  (actual: , maximum: ): 12899
   

  We can see that economy exceptions works very well, but we do not know which column is the problem... the error message indicates that the code of the error, not the context.
  
  In contrast, we do the following:
  

  insert into wxx_test2 values(11,'BB','TTTTTTTTTT')
   
  ORA-12899: value too large for column "WXX_TEST2"."COL2" (actual: 10, maximum: 4)

  Any ideas how to get the context of the error message in the EXCEPTION of SAVING clause?
  
  Have we not all SQL % BULK_EXCEPTIONS options?
  
  DB version: 11g
  
  Thanks in advance,
  Alexander.
  
  Published by: a.stoyanov on October 23, 2012 05:30
  

• When you try to view the images get message 'com surrogate has stopped working ".

  Original title: com surrogate has stopped working

  When I try to view my pictures, after a visit some of them, I get an error saying "com surrogate has stopped working". I just bought my phone yesterday and today I tried to show them. I don't have nero or DIVx on my computer. How to solve this problem? I have a windows 7-64 bit

  Hi SualehKH,

  Check out the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-photo-viewer-broken-by-Intel-Corporation/5b762252-56E0-4DD6-8581-83030c4790e3?tab=AllReplies

• See details of the exception OFA

  Hi all
  
  I try to open a custom OPS page. It is throwing the error below
  
  "You have encountered an unexpected error. Please contact the administrator of the help system. »
  
  I need to view the exception details. Is someone can you please tell me what is the profile that I need to activate it in order to view the details of the exception thrown on the page.
  
  Thank you
  Rajesh SM.

  DNF: Diagnostics.

  Kristofer

• The OperationBinding to messages in the FacesContext stop

  Hello
  
  We do sometimes manually an OperationBinding by calling something like:
  

  OperationBinding op = bindings.getOperationBinding("someOperation");
  op.execute();

  Sometimes, the method of façade that is called throws an exception. It is a useful exception with a useful description of the problem. We can extract the necessary information from the exception and display it to the user via a FacesMessage.
  
  Here's the problem: the method OperationBinding.execute () catch the FacesContext with gibberish messages that look like this:
  

  JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: ........... .; nested exception is: java.lang.IllegalArgumentException: ............

  These messages are completely unacceptable to appear in the GUI. We need an easy to use instead of the message.
  
  So, how can we prevent ADF from stuffing the FacesContext with gibberish messages? Or, if it is impossible to prevent these messages, could anyone please advise how we can Remove from the context?
  
  Thanks in advance.

  In fact, post Wes indicates how create an error handler custom - the error handler is responsible for reviewing the generated exceptions and convert them to the faces of messages.

  The OperationBinding execute() method, when exceptions occur in the underlying method, wrap the exception inside things like Houston-29000 (as you saw). You could very well take approach of Wes, create a handler for custom errors and when you get a Houston-29000, walk the exception details yourself and only add Messages faces as your needs (i.e., do not add a message for the Houston-29000).

  Ideally I'd like a way to do something like this (hint hint hint of Oracle), which cannot be done today:

  OperationBinding op = something;
  
  try
  {
    op.executeButPleaseDontEatTheExceptionsAndJustThrowThem();
  }
  catch (MyCustomException mce)
  {
  ...
  }
  

  As for the post of the Jags - messages always appear.

  John

• Get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 Compadtibilty Pro

  When I start the first items 11, I get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 compatibility profile context.  My computer crashes when I click OK.

  It should be in the same place. But do not set your Folder Options to show all files, or you won't see it!

• Window - no disc - Exception Processing Message C0000013 interferes with the mode 'sleep'

  I get an error message when the computer attempts to enter the mode 'sleep', after the time runs out of screensaver.  It will not allow the pc go to the "sleep mode" and if I try all options listed... it starts then the mode "standby".  Sometimes, it appears immediately and I can ignore it by continuing the work at hand.

  The message is this: Windows - No disk

  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Options: Cancel try again continue

  Thank you... Joan

  It would be interesting to know what your system brand and model is and what your version XP and the Service Pack, but it's just a fantasy of mine that the Microsoft Answers forum would actually make for such things when a new issue is created.  This shortfall in crude in the development of MS Answers forums unnecessarily prolongs solving simple problems.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Any error will always be displayed in case view the log, but you won't see any popups

  Reboot your system and check the things now.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

• Stat of the system upward with the error: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Original title: Getting a weird error message. Seems to be the floppy driver.

  Hello. This problem everything seems to start when I changed my drive letters. Finally, I think it points to my floppy drive A.

  I get these error messages when I start my computer. Windows tells me this: No. disc: "treatment of Message of Exception c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". It happens about 8 or 9 times then goes away.

  I have several internal hard drives, 2 optical drives, A floppy drive, a card reader and a printer. I decided to shift the drive letters down after hard drives since I have recently installed a dual-boot and needed earlier letters to the editor. The problems started before the dual-boot has been installed. Changed this example of drive letters: g-i, h-> j > I-> k, etc. The main readers have remained the same.

  I uninstalled the floppy drive and the controller, Windows re - installed after re-booting of course.

  I disconnected Ribbon floppy motherboard and the power supply. The messages stopped. I then uninstalled the floppy drive and the controller in Device Manager. I reconnected it A floppy Ribbon and power, loaded windows reinstalled the drivers and then gave me the error emssages once again.

  I have a DVD of Windows XP Home Edition 32 bit SP3. Telling me to do a repair isn't the best idea, because nobody has explained how it works. When the DVD goes in the car or at the start: there is no repair function.

  Thank you.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb.

  I closed my computer and he says there are a few updates that should be installed in front of him close. I let it run and my computer off. Now, when I turn it back on I get the following error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb. And now I can't get my computer to connect to a wired or wireless internet connection, and it seems to be running slow. Any ideas what it is or how to fix it?

  Also, I tried to restore my computer to a few days ago and running my software virus and nothing is changed.

  Hello

  Have updates you installed? You can check this in the history of the update?

  Step 1: To check the update history, follow these steps:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 2: Refer the article that could help you solve this problem.

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
  http://support.Microsoft.com/kb/927385

• View the Error Message customized to Apex

  Hello
  
  I created a form master / detail on Emp and Dept tables. In the Dept table, I have deptsal column, which is updated by a trigger on the table EMP.
  After trigger DEPT table a:
  
  create or replace trigger "TRG_DEP_SAL".
  BEFORE the UPDATE on "DEPT".
  FOR EACH LINE
  BEGIN
  IF: NEW.deptsal > 100 THEN
  RAISE_APPLICATION_ERROR (-20001, 'Dept too high salary!');
  END IF;
  END;
  
  Then, when I get the salary on Apex shape, which increases the limit of deptsal for example 100, it gives the following error message:
  
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: Dept too high salary! ORA-06512: at "ZAHIDKHANUK. TRG_DEP_SAL', line 4 ORA-04088: error during execution of trigger ' ZAHIDKHANUK. TRG_DEP_SAL' ORA-06512: at "ZAHIDKHANUK. BIUD_EMP', line 11 ORA-04088: error during execution of trigger ' ZAHIDKHANUK. BIUD_EMP', to update 'ZAHIDKHANUK '. "' EMP ' defined 'EMPNO' =: b1, 'DEPTNO' =: b2, 'ENAME' =: b3, «JOB» =: b4,"MGR"=: b5, 'HIREDATE' =: b6,"SAL"=: b7,"COMM"=: b8, 'ID' =: b9 where 'EMPNO' =: p_pk_col
  Error failed to process the update.
  Ok
  
  
  How can I view my message?
  
  Thank you
  Zahid

  Hello

  Yes, you can do it. You create a validation of the page that moves through the records in a tabular form, checks entered values, and then returns an error message.

  Create a new validation. Set it to a Page-level validation, select PL/SQL and then function that returns the error text, then give it a name. The PL/SQL will be something like:

  BEGIN
   FOR i IN 1..APEX_APPLICATION.G_F01.COUNT
   LOOP
    IF TO_NUMBER(APEX_APPLICATION.G_F04(i)) > 100 THEN
     RETURN 'Item ' || TO_CHAR(i) || ' - DEPTSAL must not be greater than 100';
    END IF;
   END LOOP;
   RETURN NULL;
  END;
  

  It will loop through the records in column 4 and check the amount. If it is greater than 100, an error message is generated displays the line containing the error. This will stop the process on the first error. If there is no error NULL is returned that indicates that the validation test was successful.

  You need to replace G_F04 with the correct column for your page - make a display on the loaded page Source and check the attribute "name" for the column. G_F04 is for "f04", G_F05 is for "f05" etc.

  Andy

• Is it possible to get the expression of quick filter above the list of messages in the vertical view?

  See the attached screenshot.

  I have a fairly big screen so I prefer to use the vertical display (with message pane appears to the right of the message list pane).

  I use quick filters / lot of research in the search for old messages. In doing so, my attention is focused on the message list pane, but to type an expression that I have to drag my focus on the far right of the screen, above the message pane. Logically, this area of the screen should be associated with the message, not the list of messages.

  If a simplistic solution can be available if I ask you if there is a way to customize the location of the elements in the quick filter bar, as I illustrated on the screenshot?

  But I think that the fundamental solution is to make the bar area of quick filter in the list pane message, instead of the current arrangement where it is part of the largest component that contains the message list pane and message pane.

  I welcome any advice on how to solve this problem, for me, or get it repaired for others to share.

  Ah, found the bugzilla database - was looking for link to support the site, but as I couldn't find one, I assumed that this channel has been used on the screen of the excessive defects in bugzilla.

  In any case, a quick search found me https://bugzilla.mozilla.org/show_bug.cgi?id=592248 - where someone complained the quick filter bar was too short in vertical view and this has been resolved by extending the bar on the top of the message pane.

  I guess that preference will depend on the size of the screen. I will take the question through bugzilla and can provide a patch to satisfy both sides, if I have time one of these days.

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• How to view the header of the message pane

  want to sort the messages in my Inbox, but there is no header click. How can I view the headers.

  It seems that Gmail doesn't have this feature, and I don't think anyone has found a solution other than view (IMAP) or recover (POP3) messages in a program like Thunderbird or Outlook that has sorting features.

  • Can I pay my Inbox by Date, sender or subject? -Forums of Google products
  • Sort messages by date, subject, sender Gmail - Google products Forums