Impossible to check the Deskjet 3845 ink levels

Similar Questions

• Impossible to verify the Photosmart C6180 ink levels

  Can someone tell me how to check ink levels please.

  Hello

  It should be under the arrow to option on the right side of the screen :-)

• How can I check for the Officeject 5510 ink levels?

  How can I check the Officejet 5510 ink levels?

  Thanks, but which refers to the HP Director to access the ink levels and I couldn't find that. I ended up replacing this printer with a new then is no longer a problem, but appreciate your response.

• Impossible to check the level of ink HP Deskjet 3050 J610

  I'm unable to check the ink level. When I go to:

  Control Panel\Hardware and Sound\Devices and Printers\HP Deskjet 3050 J610 series

  I get only 'see what's printing","Set preferences"and"customize your printer.

  

  How can I solve this problem?

  When I bought it. I installed all the software from the CD and that's all, but for some reason any here is no more.

  Operating system is Win7 64 bit

  When I run CD > add more software "already installed" read here at the end.

  I uninstalled HP Deskjet 3050 J610 series and then I reinstalled the CD software.

  When I uninstalled it, I got error:

  Warning of 1910. Could not remove shortcut HP Deskjet 3050 J610 series Scan.Ink. Verify that the shortcut file exists and that you can access.

  And after that I reinstalled the software and now it works.

  I'm crazy enough to forget that I had the CD and I could do it.

  Thanks for help.

• poor print quality, clean the heads, all ink levels ok,

  printing lines, horizontal, poor quality, some missed lines quality fakes. Cleaned heads, nozzle, all ink levels fine

  Hello Stephenagar,

  What operating system you run on your computer? (Windows 7, Vista or XP?)
  
  
  What is the printer brand and model? (HP, Canon, Brother, etc..)
  
  
  I suggest that you try runing the Microsoft FixIt tool is in the following article:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Impossible to check the Plugins since the update to 35.0

  When I go to "Tools" then click on "Add-ons" and then click "Plug-Ins" and then click "Check if Plug-Ins are up-to-date", it goes to Mozilla, check your plug in Page it only sit and rotate the "checking with Mozilla on the status of your plugins." I use Win7 Pro and just download the update of Firefox to 35.0.

  Philipp said

  Hi joe, what happens now blocklisted and probably several hundreds of thousands of users who try to update their flash plugin that there were / are questions about plugincheck mozilla page load. mozilla web developers are aware of this and working to fix it!

  people who see this thread and will have to update flash can do manually in will http://www.adobe.com/products/flashplayer/distribution3.html & install version 16.0.0.296...

  Thank you for your update in this case. I turned off my Java programs and checked the page updated and now completely load so I can see needing Add-ons update so I deleted completely from Java on my computer. Thanks to the web developers of mozilla to solve this and once again your update.

• HP DESKJET Ink Advantage 2010: Should I remove the Deskjet printer ink cartridge during transport?

  Hello! I want to ask you if anyone can tell me how to correctly carry a printer?

  I use the printer for 2 days (so ink cartridges have been placed only 2 days ago) and would like to know if:

  1. I have to remove the cartridges. If I remove and reinsert will still be usable?

  2. it's OK to carry the printer on the side if the cartridges are inside. Or I have to carry the item in its upright position?

  I hope someone can help me as soon as possible because I'm leaving tomorrow morning.

  Help HP Deskjet Ink Advantage 2010

  Thank you!

  Hello @nikkiyzq,

  Thank you for visiting the Forums from the HP Support! I hope that's going to happen to you until you leave. Take a look below for instructions of proper care for the HP cartridges:

  Storage and handling of the ink cartridges

  I do not recommend storing the printer on the side, you do not want any ink to flee.

  I hope that answers your questions.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• How to check the mic or line level BEFORE recording?

  I used to use CoolEdit Pro 2000, then the first CS1 hearing (which was the same program as far as I could tell).  With earlier versions, I could follow the input signals and display the levels without actually start recording.  YES, I know that you can't adjust the parameters of audio of the hearing, but he must see the hearing levels before you know how to adjust the material.  I can't find how to proceed with the hearing CC.  Of course, I can start recording, get a check levels, then stop and delete the record, but it's stupid. So what don't understand me?

  And forgive me if this is a stupid question, but if it has been asked and answered before I can't find where.

  Right-click on the meter and select the input Signal of the meter at the top of the list or Alt + I to activate it.

• Impossible to check the FPGA reference with "not a number/path/Refnum?

  How can I check if an FPGA interface refnum is valid?  It seems (LabVIEW 2009) that "Not a number/path/Refnum?" always returns true when connected to the output of open FPGA VI reference.  I write code that needs to be able to run without an FPGA for testing purposes, so I wrapped all calls to the FPGA in a case structure that I thought would run only if the FPGA reference is valid.  Turns out that they run ever, even when the FPGA reference is valid (probe shows it has a numerical value, and the FPGA VI is running).  I guess it's sort of similar to semaphore and appointment of references that have their own special function to verify the validity, but I do not see such a function for FPGA.  I have to cast to int and check if it is not equal to zero?

  
  

• discount for printer hp deskjet 3050 ink level has

  How can it be done after the filling of cartridges

  The short answer is: you probably can't.  Filling of ink cartridges is not an activity approved by the majority of manufacturers of printers and cartridges contain sensors that do not allow to reset after filling.  But for a definitive answer, you need to ask HP, not us; We control works of HP hardware.

• Vista - Error Code: 0 X 80070426 (impossible to check the updates)

  I have a Dell Inspiron 1400 with Windows Vista. When I am invited to the 'check for updates now' I get a message saying "error found: Code 0 x 80070426"

  Along with this, when I click on Control Panel, it appears for about 5 seconds then goes off and won't open unless in safe mode. I also have an HP printer and when the error message started works do not, the printer refused to print well, saying: "the default settings must be reset."

  Help, please!

  -haley

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  See problem control panel: http://support.microsoft.com/kb/936686/en-us 
  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center, or games in Windows Vista

  For printer: http://windows.microsoft.com/en-AU/windows/help/printer-problems-in-windows

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Vista 80070057 error message impossible to check the updates of the window

  I recently installed Vista Home Basic Edition and then the facility, I was able to install an update from windows.  However, after installation was performed whenever I tried to use "check updates window, the error message came 80070057 disoriented

  The only security program I have is the free version of Defender 9.  No other safety programs have been installed before or after installing Vista.

  Not good.  :(

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  How TO do a clean install of Vista: See the section "If you want to reinstall Windows Vista by running a new installation... "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  1. download the removal tool, save it to your desktop.
  2. close all open applications (that is, anything with an icon on the taskbar).
  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to update the software to 9.3 on my IPad 2.  I get the message that it is impossible to check the update since I'm no longer connected to the Internet.  Not true.  I am connected.  Any suggestions?

  I'm trying to update my IPad 2 iOS 9.3 software.  It keeps telling me that it cannot be verified because I am is no longer connected to the Internet.  Not true.  I am connected.  Any suggestions?

  Many users have encountered problems to update their devices, their activation or signing into their account after updating iOS 9.3. Apple is aware of the problem and working on a fix.

  Take a look at these articles for additional information on the issue or adapt:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3If you cannot activate your iPad 2 (GSM model) updated to iOS 9.3

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more

• HP Laserjet M426fdw: Impossible to check the firmware version

  
  

  There is a newer version of firmware available for your printer. If you cannot update the firmware by using the control panel option you can use the method by using the available Firmware Update utility to: www.hp.com/support/ljM426MFP and described in this paper: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=7458649&docLocale=en_US&docId=emr_na-c03754273.

• No speaker in the taskbar icon. Impossible to check the box greyed out for its control panel of configuration/sounds

  Reference to any icon on the desktop... fix .suggested.

  I did a right click Start, open and look through everything. There is NOT a speaker ICON is located. What should I do next?

  I don't have windows vista... I have XP-Prof.

  You are in the wrong forum. It is the Vista forum.

  Please repost in the XP forum, office and appearance.
  http://social.answers.Microsoft.com/forums/en-us/xpdesktop/threads

  The next time of property to specify your OS, operating system, until you state your problem. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.