Impossible to drop the user in TimesTen

Similar Questions

• Impossible to drop the user after abruptly stop (Ctrl + C) impdp oracle 12.1.0.1.0.

  Hello Experts-

  Help me please drop the user.

  SQL > select sid from session $ v where username = "POLICY";

  no selected line

  SQL > drop user cascade of POLICY;

  drop the cascade of user POLICY

  *

  ERROR on line 1:

  ORA-00604: an error has occurred at the SQL level 1 recursive

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  Read the error message; the error is not about removing a user, it's dropping of the user OBJECTS, which were used at the time of the fall of attempt.  Import (so an insertion) was interrupted while Oracle has roll back the transaction, which takes time and locks the object.  Once the restore is complete, the locks have been released and the user, as well as all the objects for this user, could be deleted.

  David Fitzjarrell

• Impossible to drop the user

  I get the following error while dropping the user...
  
  SQL > drop user cascade ONAIR.
  drop the ONAIR user cascade
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-24005: must use DBMS_AQADM. DROP_QUEUE_TABLE to drop queue tables
  
  
  I asked dba_queue_tables but her shows that r thr tables without current queue...
  
  
  Select queue_table from the dba_queue_tables where owner = "FLIGHT."
  
  no selected line
  
  DB version is 10.2.0.4.0 aix Server

  RUN THE SYS. DBMS_AQADM. DROP_QUEUE_TABLE (queue_table-online 'JOB_QUEUE_DATA', force-online TRUE);

• Cannot drop the USERS tablespace.

  Hi all
  
  I am trying to drop tablespace USERS and in the face of error below.
  
  PLATFORM:
  OS: Linux Ubuntu 9.04, LTS
  SQL > select * from v version $;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  PROBLEM:
  SQL > drop tablespace users, including content and files of data cascade constraints;
  Drop tablespace users including data files and content cascade constraints
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-24005: must use DBMS_AQADM. DROP_QUEUE_TABLE to drop queue tables
  
  
  When I see, dba_queue_tables...
  SQL > select the owner, queue_table from dba_queue_tables object_type.
  
  OWNER OBJECT_TYPE QUEUE_TABLE
  ------------------------------ ------------------------------ -------------------------------------------------------------
  SYS ALERT_QT SYS. ALERT_TYPE
  SYS AQ$ _MEM_MC
  SYS AQ_EVENT_TABLE SYS. AQ$ _EVENT_MESSAGE
  SYS AQ_SRVNTFN_TABLE SYS. AQ$ _SRVNTFN_MESSAGE
  SYS KUPC$ DATAPUMP_QUETAB SYS. KUPC$ _MESSAGE
  SCHEDULER SYS $_EVENT_QTAB SYS. PLANNER$ _EVENT_INFO
  SCHEDULER SYS $_JOBQTAB SYS. ANYDATA
  SYS SYS$ SERVICE_METRICS_TAB SYS. SYS$ RLBTYP
  SYSMAN MGMT_NOTIFY_QTABLE SYSMAN. MGMT_NOTIFY_NOTIFICATION
  SYSTEM DEF$ _AQCALL
  DEF SYSTEM $ _AQERROR
  
  11 selected lines.
  
  Also, there no tables in the tablespace USERS now, as I moved to another tablespace.
  SQL > select count (*) from dba_tables where nom_tablespace = 'USERS ';
  
  COUNT (*)
  ----------
  0
  
  Tablespace USERS is not permanent tablespace, as I changed to another, always the problem.
  SQL > select property_name, name from database_properties where PROPERTY_NAME = 'DEFAULT_PERMANENT_TABLESPACE. '
  
  PROPERTY-NAME NAME
  ------------------------------ ------------------------------
  DEV DEFAULT_PERMANENT_TABLESPACE
  
  
  Can you please help me drop the USERS tablespace.

  Hi boss,

  Please find the solution for the same problem, but by dropping the user. Try the same for the Tablespace too.

  SQL > drop user cascade COLOMBO_LIVE;
  drop the waterfall COLOMBO_LIVE user
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-24005: must use DBMS_AQADM. DROP_QUEUE_TABLE to drop queue tables

  SQL > select object_name from user_OBJECTS;

  OBJECT_NAME
  -------------------------------------------------------------------------

  MYQ
  SYS_LOB0001130873C00025$ $
  SYS_C001810004

  SQL > drop table myq;
  drop table myq
  *
  ERROR on line 1:
  ORA-24005: must use DBMS_AQADM. DROP_QUEUE_TABLE to drop queue tables

  SQL > exec sys. DBMS_AQADM. DROP_QUEUE_TABLE (queue_table-online 'MYQ', force-online TRUE);

  PL/SQL procedure successfully completed.

• Impossible to drop the schema

  Hi all
  
  I'm trying to drop the schema but below error is coming
  
  (1) bdr_local > drop user cascade HILLS_ISSUE_TRACKER;
  drop the waterfall HILLS_ISSUE_TRACKER user
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-00069: could not acquire lock - tables turned off for B_ISSUE_COMMENTS locks
  
  bdr_local 2) > alter table HILLS_ISSUE_TRACKER. B_ISSUE_COMMENTS activate the table lock;
  ALTER table HILLS_ISSUE_TRACKER. B_ISSUE_COMMENTS activate the table lock
  *
  ERROR on line 1:
  ORA-00054: resource busy and acquire with NOWAIT specified
  
  bdr_local 3) > SELECT * FROM v lock $
  WHERE id1 = (SELECT FROM object owner object_id WHERE = 'HILLS_ISSUE_TRACKER' AND object_name = "B_ISSUE_COMMENTS"); 2
  
  no selected line
  
  I took the rebound of db to release the lock, if any. Please help if some body the same question.
  
  Thank you
  Jamsher.

  Something new to learn, thanks for sharing this.

• DROP the USER using Forms 6i

  Hai All,
  
  I want to create and drop database through forms 6i users.
  
  The user creation works fine for me, but the deletion of the user does not work.
  
  I use the code
  FORMS_DDL ('DROP USER CASCADE TEMP_USER'); to remove the user.
  
  but it's not working.
  
  
  one you suggest how can I remove a user from the database using forms?
  
  
  Thank you
  
  Manu.

  It works through several sql?
  If so you could do a test with immediate execution...

  create a database procedure:

  create or replace procedure execute_immediate(ivStatement in varchar2) is
  begin
    execute immediate ivStatement;
  end;
  /
  

  and call from forms:

  begin
    execute_immediate('drop user test_user cascade');
  exception
    when others then
      message(sqlerrm);
  end;
  

  run errors of immediate installation of oracle, so you should see what is happening

  concerning

• Impossible to activate the user account control

  Original title: user account will not

  My user account control has been turned off.  Whenever I'm back on the computer needs to restart. However when it doesn't the user account is still once turned off.  Any help welcome

  My user account control has been turned off.  Whenever I'm back on the computer needs to restart. However when it doesn't the user account is still once turned off.  Any help welcome

  Please, don't say "user account" when you hear the user account control. They are 2 different things.
  Tell the UAC if you wish.

  Take a look at this tutorial

  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html
  There are 3 ways to activate UAC in this tutorial.

  If still no help, please do a check of the file system. It will look for corrupted files and it will try to repair if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Impossible to support the user's virtual desktop remotely

  Hello

  I have a few question unable to support the computer remotely using vWorkspace management console. I get error "the following error occurred while shadowing session 2 on server xx.xx.xx.xx, this function is not supported in this system (120).»

  There is no recent change made broker server and am able to do support remotely to the desktop of the user without any problem. Can someone help me?

  Thank you.

  Hi Whosen,

  It is essentially an issue with differences between RDP7 and RDP8.
  Although you mention that has not changed, is it possible that it is the use of RDP7 instances, but fails on Instances of RDP8 news? It could also be related to Server 2012 for example.

  It is covered in the following Technical Support article:
  [See:support.software.dell.com/.../105537:550:0]

  I hope that it is of little help?

  See you soon,.
  Dave Caddick

• Impossible to drop the disc?

  env: 11.2.0.2.3
  
  I have a redundancy normal diskgroup (asm/RDBMS compatibility set to 11.2.0.0) containing two discs, it's everyone in own failgroup.
  I've tested the disk_repair_time attribute and took one of the disks in the group offline and waited until the expiration of the timer - to see if the disc - Oracle and test how I can recover from this situation if the drive was missing.
  
  Then I took the LOG2 drive off line and waited...
  
  ASM alerts log, I see:

  Fri Sep 09 09:59:21 2011
  WARNING: Disk (LOG2) will be dropped in: (168) secs on ASM inst: (1)
  Fri Sep 09 10:00:55 2011
  WARNING: Disk (LOG2) will be dropped in: (74) secs on ASM inst: (1)
  Fri Sep 09 10:02:27 2011
  WARNING: PST-initiated drop of 1 disk(s) in group 3(.467124207))
  SQL> alter diskgroup LOG drop disk LOG2 force /* ASM SERVER */
  NOTE: GroupBlock outside rolling migration privileged region
  NOTE: requesting all-instance membership refresh for group=3
  Fri Sep 09 10:02:29 2011
  GMON updating for reconfiguration, group 3 at 30 for pid 33, osid 13932
  NOTE: group LOG: updated PST location: disk 0000 (PST copy 0)
  NOTE: group 3 PST updated.
  Fri Sep 09 10:02:29 2011
  NOTE: membership refresh pending for group 3/0x1bd7bfef (LOG)
  GMON querying group 3 at 31 for pid 18, osid 10302
  SUCCESS: refreshed membership for 3/0x1bd7bfef (LOG)
  SUCCESS: alter diskgroup LOG drop disk LOG2 force /* ASM SERVER */
  SUCCESS: PST-initiated drop disk in group 3(467124207))
  NOTE: Attempting voting file refresh on diskgroup LOG
  NOTE: starting rebalance of group 3/0x1bd7bfef (LOG) at power 1
  Starting background process ARB0
  Fri Sep 09 10:02:34 2011
  ARB0 started with pid=37, OS id=14883
  NOTE: assigning ARB0 to group 3/0x1bd7bfef (LOG) with 1 parallel I/O
  Fri Sep 09 10:02:40 2011
  NOTE: GroupBlock outside rolling migration privileged region
  NOTE: requesting all-instance membership refresh for group=3
  Fri Sep 09 10:02:40 2011
  NOTE: stopping process ARB0
  SUCCESS: rebalance completed for group 3/0x1bd7bfef (LOG)
  Fri Sep 09 10:02:43 2011
  GMON updating for reconfiguration, group 3 at 32 for pid 38, osid 14888
  NOTE: group LOG: updated PST location: disk 0000 (PST copy 0)
  NOTE: group 3 PST updated.
  WARNING: offline disk number 1 has references (904 AUs)
  NOTE: membership refresh pending for group 3/0x1bd7bfef (LOG)
  GMON querying group 3 at 33 for pid 18, osid 10302
  SUCCESS: refreshed membership for 3/0x1bd7bfef (LOG)
  NOTE: Attempting voting file refresh on diskgroup LOG

  And from RDBMS alerts journal:
  

  Fri Sep 09 10:02:32 2011
  SUCCESS: disk LOG2 (1.2526490858) renamed to _DROPPED_0001_LOG in diskgroup LOG

  OK, check in asm v$ asm_disk:
  

  SYS@+ASM1 SQL>r
    1  select a.name "GroupName", a.state "GroupState",b.name,b.mount_status,b.header_status,b.mode_status,b.state "DiskState",b.repair_timer
    2  from v$asm_diskgroup a,v$asm_disk b
    3  where a.group_number = b.group_number
    4* order by a.name,b.name
  
  GroupName                      GroupState  NAME                           MOUNT_S HEADER_STATU MODE_ST DiskStat REPAIR_TIMER
  ------------------------------ ----------- ------------------------------ ------- ------------ ------- -------- ------------
  DATA                           MOUNTED     DATA1                          CACHED  MEMBER       ONLINE  NORMAL              0
  DATA                           MOUNTED     DATA2                          CACHED  MEMBER       ONLINE  NORMAL              0
  GRID                           MOUNTED     GRID3                          CACHED  MEMBER       ONLINE  NORMAL              0
  GRID                           MOUNTED     GRID4                          CACHED  MEMBER       ONLINE  NORMAL              0
  GRID                           MOUNTED     GRID_0001                      CACHED  MEMBER       ONLINE  NORMAL              0
  LOG                            MOUNTED     LOG1                           CACHED  MEMBER       ONLINE  NORMAL              0
  LOG                            MOUNTED     _DROPPED_0001_LOG              MISSING UNKNOWN      OFFLINE FORCING             0
  
  7 rows selected.
  
  
  SYS@+ASM1 SQL>select * from v$asm_operation;
  
  no rows selected

  So, why the disc always showing to v$ asm_disk if it fell? Or is it? I thought that Oracle should drop the disc at the expiration of the timer of the repair, but then why I always see it? I want to add the failed drive to return once again... How can I realize that, if the drive is still a member of the diskgroup of the NEWSPAPER?
  
  Thank you..
  
  Published by: AJ on 09.sep.2011 01:17

  Hello

  the reason behind this, is that a DISC will get status COWARD, if all valid content could be moved to another drive.
  However, in your case your LOG diskgroup consisted only of 2 discs (and 2 failgroups). So when access to a failgroup had disappeared, the whole failgroup was set to offline.
  Now when the repair timer expires the disks to be abandoned. However, it cannot be moved, because the data on the disk can not be moved to other disks.
  So what happens, is that your discs will be defined in the sense of "FORCING", as soon as the data can be rebalanced to another drive (maybe when you add a new drive), the drive really will be abandoned.

  Concerning
  Sebastian

• Impossible to drop the undo tablespace

  Hello
  
  ORACLE VERSION: 11.1.0
  OPERATING SYSTEM: WINDOWS XP
  
  I have been uable to drop the undo tablespace. Here I create a new undo tablespace and trying to drop the old undo tablespace.
  
  I had given alter system set UNDO_TABLESPACE = newundo tablespace.
  
  And try to drop the old one and get the error like this
  

  SQL> create undo tablespace undotbs02 datafile 'F:\APP\POORNAPRASADS\ORADATA\ORCL\UNDOTBS02.dbf' size 200m;
  
  Tablespace created.
  
  SQL> sho parameter undo
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  undo_management                      string      AUTO
  undo_retention                       integer     900
  undo_tablespace                      string      UNDOTBS1
  SQL> alter system set undo_tablespace=undotbs02;
  
  System altered.
  
  SQL> sho parameter undo
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  undo_management                      string      AUTO
  undo_retention                       integer     900
  undo_tablespace                      string      UNDOTBS02
  SQL> drop tablespace undotbs1 including contents and datafiles;
  drop tablespace undotbs1 including contents and datafiles
  *
  ERROR at line 1:
  ORA-30013: undo tablespace 'UNDOTBS1' is currently in use
  
  
  SQL> drop tablespace undotbs1 including contents and datafiles;
  drop tablespace undotbs1 including contents and datafiles
  *
  ERROR at line 1:
  ORA-30013: undo tablespace 'UNDOTBS1' is currently in use

  There are active sessions that use of old undo segments. I think you should kill these sessions in order to relase these segments

  - - - - - - - - - - - - - - - - - - - - -
  Kamran Agayev a. (10g OCP)
  http://kamranagayev.WordPress.com
  [Step by step installation Oracle Linux and automate the installation by using Shell Script | http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

• Impossible to verify the user name or password in e-mail

  In OSX El Capitan.  It does not accept my username and password for the mail.  Have not changed and they work very well in other apple applications that have the same user name and password.  Anyway to reset the password.  It doesn't give me that option as do most of the other programs.

  Thanks for any help.

  Peter

  Remove the password in Keychain Access (Applications/Utilities).

  The problems of Keychain - see post of khati

• Impossible to change the user account for the administrator account

  I have followed closely the instructions in this forum to change a user to an administrator account account. However, when the dialog box that allows the selection of a standard account or administrator account opens and I select the administrator account, the "change account Type" gray button and I can't make the selection. Any help would be appreciated.

  When the dialog box that allows the selection of a standard account or administrator account opens and I select the administrator account, the "change account Type" gray button and I can't make the selection. Any help would be appreciated.

  Your account is already at the level of the admin (see marked area below). You may not promote any more away.

  

• Impossible to update the user in the BCMS in any browser

  Hello

  I try to update access internal users via CSAM and can not get the BCMS to function once I click in to update a user internal...

  I tried in IE, Firefox and Chrome.  Any suggestions?

  See picture attached.

  Hi Deanna,

  Please, use this link and we keep abreast on a case where even you cannot connect to the CFS page.

  http://Tools.Cisco.com/CDCEB

  Concerning

  Pamela

• Impossible to authenticate the user to ACS 5.1 with LDAP as identity outdoor store

  Hi, I have a server and Open-LDAP running ACS on my corporate network.
  Now, I'll set up a new linksys WAP - 54G and select WPA2-Enterprise with ACS as radius server.
  the first thing first, I created new internal user to ACS and trying to join the network wireless from my computer. I did it...

  then I move on an external entity (LDAP server). I set up the sequence of configuration and the LDAP identity, also select the access service.  but when I tried to authenticate from my computer, an error has occurred. I received:
  the following error 22056 object was not found in the store identities applicable (s)

  Ask me ' bout this thing, I implemented a cisco router 1841 to become customer of AAA. and surprise... it works!
  Yes, there is problems to authenticate to the windows of ACS (pointing to LDAP) platform?
  any suggestion?
  Thank you

  Hello

  Looks like you haven't mschap authentication is enabled on the ldap server. You can use eap - gtc instead, but need you:

  1 enable eap - gtc under protocols allowed on your ACS access policy

  2. install an eap - gtc "supplicant" on the windows box - if you have a wireless network card intel, the intel proset client supports eap - gtc

  This could mean a fair bit of work according to the number/type of wireless clients you have - could be useful on the LDAP mschap authentication activation.

  HTH

  Andy

• Impossible to drop the datafile after a fall of tablespace

  Hi all
  
  Try to Drop tablespace with Datafile command used is as below
  
  Drop tablespace tims_db including content and data files;
  
  It has been performed successfully, but the data file is always... tried to let fall off the BONES, but cannot remove the alert... associates file tracking logs are as below
  
  __________________________________________________________________________________________________
  C:\oracle\admin\ocprd\udump\ocprd_ora_4236.TRC dump file
  Mon Feb 06 03:40:58 2012
  ORACLE V9.2.0.6.0 - Production vsnsta = 0
  vsnsql = 12 vsnxtr = 3
  Windows 2000 Version 5.0 Service Pack 4, CPU type 586
  Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
  With partitioning, OLAP and Oracle Data Mining options
  Release 9.2.0.6.0 - Production jserver
  Windows 2000 Version 5.0 Service Pack 4, CPU type 586
  
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 14
  
  Windows thread ID: 4236, image: ORACLE. EXE
  
  
  2012-02-06 03:40:58.562
  SESSION ID: (52.7127) 2012-02-06 03:40:58.500
  ORA-01259: cannot remove the E:\ORACLE\ORADATA\OCPRD\TIMSDB01 data file. DBF
  ORA-27056: skgfrdel: could not delete file
  OSD-04024: cannot delete the file.
  S/O-error: (32 OS) the process cannot access the file because it is being used by another process.
  ______________________________________________________________________________________________
  
  OS: Windows 2000
  DB: Oracle 9i
  
  Help, please
  
  Thank you

  user1687821 wrote:
  As it is an instance of production, we need approval to bounce back

  If you are sure that this file is not necessary - unlock with unlocker and move to a place for a while. Then kill him or kill him immediately.

  Then the database will ask missing datafile to the restart of the database even if it is not listed in dba_data_files...?

  If your fall of tbs succeeded - everything will be fine