Impossible to edit the film

Similar Questions

• HTML Parsing error: Cannot edit the item container parent before the child element is closed (KB927917).

  Original title: HTML Parsing Error:

  When I go on this particular Web page, I can open the page, but with errors.  The error I get is: HTML Parsing Error: impossible to edit the item container parent before the child element is closed (KB927917).  Can someone out there help me solve this problem.  Also, it is the only Web page devoted to this particular site that does this.

  Hi Debbie9089,

  ·         What browser do you use?

  ·         Have you been able to access this site much earlier?

  If you use Internet Explorer, you can follow this link and check if the problem persists.

  Why do I get an "Operation aborted" error message when I visit a Web page in Internet Explorer?

  Hope the helps of information.

  Please post back and we do know.

• Photos app does not save the changes, impossible to edit photos without using other applications

  'Photos' of photo editing features does not work because it is impossible to save the changes. Photos can be edited as usual, but trying to save the changes that the photo is reinstated to the State of origin regardless of changes. There is no error message, to solve the problem, I tried to reset all settings, but it did not help.

  I have iOS 9.2.1 on an iPhone 6 s.

  Thanks in advance for your advice

  I have the same question since getting my iPhone 6. Very frustrating. Several times the photo says even "revert to original" even though the changes have been never applied, as if he thinks he has saved the changes. I asked for help with an apple store and they had never seen before and had no suggestions.

• Cisco Secure ACS appliance - impossible to edit... Reason: The host no longer exists.

  Hi team,

  I have 2 camera which I am not able to remove a group of network devices home device.

  When I try to remove the device after error is thrown

  Impossible to edit INMUM-VPE-T1-3rdFloor-3750-S...  Reason: The host no longer exists.

  Running on Version: Cisco Secure ACS4.2.0.124

  One would come in all of these issues. someone knows the solution.

  Concerning

  Vineeth

  Hi Vineeth

  Yes, you can do through GUI.

  The GUI:

  1 ACS gui > network configuration > click on 'Search', then click 'Search' again.

  2. complete list of all network devices. On top, you will see an option "Download".

  Download the complete file.

  Let me know if it helps.

  Thank you

  Nelson Saha

• I'm editing a dynamic text in a Facebook Flash model. When I try to test the film I

  I'm editing a dynamic text in a Facebook Flash model. When I try to test the movie I get an error message saying the film uses features not supported in Flash Player version 5. I downloaded the latest version but still get the error message. What I'm doing wrong? *

  Look at your publication settings... Do you have as a reader for your .swf Flash Player 5?

• Windows Movie Maker ceases to meet impossible to publish the movie

  Windows Movie Maker stop - impossible to publish the movie

  Windows Movie Maker gel

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  =============================================
  I guess you have a problem with incompatible
  files sources... the most reliable formats to use are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wmv, wav

  The following articles may be useful:

  Type of file with Movie Maker compatibility
  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?
  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer - MS - MVP - digital media experience

• Settings for automatic coloring of the information of the film selected in iTunes?

  Before the 12.5.1 updated, iTunes displays the film selected using an algorithm to color text information and text background to complement the art of the poster for the film, and I was wondering if there was a way to get this behavior after the "update".

  It is based in preferences, or maybe a terminal hack?

  I'm a graphic designer in the way and was always amazed at how good the algorithm was. There not sometimes to some album covers, but usually it really improved the browsing experience for me.

  I totally agree and would like to know if there is a way to edit the preferences to get this feature. I'm a designer too and I think the new UX is awkward and annoying. I know it's supposed to be more "readable", but the color more old coordinated circles have a much nicer visual environment that really added to the listening experience. It was the main reason that I went from Apple's music Spotify.

• Impossible to change the nationality

  Impossible to change the nationality of my Apple ID because I €0.04 on it. How can I move or delete?

  See the next topic If you can't edit your iTunes Store country or region - Apple Support

  You must spend your balance before you change stores.

  If your credit is less than the cost of a single item on the iTunes Store, App Store and iBooks Store, you can Add a credit card on your account. When you purchase an item, you will use the remaining store credit and charge the rest of the purchase to your credit card.

  If you do not have a credit card, contact the iTunes Store support.

• Menu main movie Audio playback during the film

  Hi all

  Good evening

  I'm watching the X - men First Class movie, I bought a long time ago. Unfortunately, once that I touched READING the menu main iTunes film starts but continuous loop during the movie main menu theme music makes it impossible to hear the audio and enjoy the movie.

  I tried several options, nothing seems to work. Its as if he has 2 windows, 1 of the main menu and the 2nd movie, but I cannot close the main menu without closing the film.

  Any help would be appreciated.

  Kind regards

  No worries found a solution, I just selected the film only in my iTunes list, has not noticed it before. Just goes to the film without having to go through iTunes extra version.

• Change the title of the film

  Since the upgrade to iTunes 12.4, which occurred automatically when I upgraded to El Capitan, a move, I regret a hundred times a day. I find that I can't edit the title and other information of movies (corporate videos that I use to show potential customers). It was SO easy on the previous version of iTunes but I can't figure out how to do on this version. These movies are saved on my iPad, and when my iPad is connected to my MacBook Pro and I click on the movies under iPad Summary tab - settings, I can't do a right click on the movie to bring up the information (that I could in previous iTunes). If I click on the movies tab slot on my device and make a list of movies, right click on a title, then right click on read the information, the title of the film is gray and I can't change it.

  Does anyone have any suggestions on how to solve this problem, other that go back to a PC and tell Apple where they can put their crappy OS system!

  Thank you. :-)

  If these videos are synchronized on the iPad from iTunes or the Photos app, change the title in these applications, not in the display on my device, and then synchronize again.

• Could not open the film after completing

  Seems, I am not alone, but I don't see a convincing solution yet, so I write the question.  I finished the editing of a film and inserting the titration overall.  iMovie has crashed a few times, but the project was intact at the opening.  When you are finished, I clicked on "Finalize project" and left the computer alone for a few hours.  He said it would take three hours, but after about two saw that the status bar was no longer visible, and the app was always open to my movie, so I thought everything was fine and closed my MacBook Pro.  Now, back to search, I find the project file, but no evidence of my finished movie.  I see other projects of film that I can open and play, but only the first sequences of the film I just did.  It shows that the project is 5 + gigs, but I don't know if it simply means that all the raw images is 5G or if it's that big because all my titles is there somewhere (I hope).

  Never mind.  If you make the menu drop-down 'open with', you will see a selection of watch "content of the package."  There you will find your recorded several times, all renowned movie with generic codes relating to the size with extensions .mov and MP4 files.  Renamed completely.  Not useful.  No rational.

• Google Cloud Print setup - impossible to analyze the capabilities of the printer

  I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for public and private use for eprint settings with no luck.

  Any help would be greatly appreciated.  I tried the reset email with no luck...

  EDIT - 01/04/11:

  I chatted with HP support, and although the representative was extremely courteous, they could not help me.  The support agent assured me that the matter would be taken at a higher level and looked so I hope that we can have a resolution here shortly.

  EDIT - 04/04/11:

  Received a response from the original HP rep that I chatted with online.  In short, it was not able to find a solution and States, that the question will be sent upwards to the highest level of technical support from HP...  We shall see.

  EDIT - 05/25/11:

  After 2 months of waiting, HP has corrected the problem.  Don't forget to upgrade to the latest firmware and check all the settings before continuing.

  The fix came from the side server - this defiinitely had nothing to do with the firmware.  I've updated on Monday for the latest on the HP website and it was still not working.   The gentlemen of tech support that helped me sent me an email a few hours after we talked, saying the sea a fix was to come.

  Nevertheless, I am happy without worrying how the fix is here!

  It took only 2 months to fix, but I'm glad it is.

• How can I restore/reinstall a movie that I deleted by mistake from my pc? The film is up/downloaded from a Flash drive.

  I inserted the flash drive, go to "My Computers", click on the name of the movie and it says 'Windows cannot find' because I had deleted and now I want to restore it. I have by mistake deleted earlier.

  Not what I mean, but since you have found that
  screen... try clicking on ' (4) open folder to view files '.

  Should allow you to view the directory (content)
  of the Flash Player.

  When the directory is open... go to... Edition / select all.
  Then go to... Edition / copy...

  Right-click on an empty area on your desktop and the
  menu choose... New / folder.

  Now, do a right click on the new folder and go to... Editing / paste.

  To copy everything to the flash drive in the folder.

  If the film is there, you might be able to play...

  Good luck...

• When I start with Windows XP Home Edition, the screen appears, only the mouse arrow. Help!

  When I start with Windows XP Home Edition, the screen appears, only the mouse arrow.  Help!

  Hi stevejager,

  ·         Remember to make changes?

  ·         You receive an error when starting?

  ·         Have you tried booting in safe mode?

  Method 1: First of all, we will try to start the computer in last good known Configuration and see if it boots.

  Method 2: If it is impossible to start, try to start in safe mode. If able to start and then try to perform a System Restore, since this is a recent problem that has occurred.

  Method 3: Follow the steps in the below article mentioned.

  Computer stops responding with a black screen when you start Windows XP

• Windows DVD Maker Burns not part any video of the film, I have a black screen in the middle of the music and titles...

  I made a movie in Windows Movie Maker using film 8 mm which was transferred to the files. The film came out great but when I go to 'release', or burn to dvd, it says Windows Movie Maker will save file and open it in creation of DVD to burn/publish.  About halfway through the movie, there is no 8 mm video, you can see all the titles, and hear the music that I edited in but no video.  I cut the video in half thinking there was too much data, I burned my movie with no other programs running, I changed all the transitions and titles in thinking that you might have a glitch.  I have burned about 10 films try something different each time without success. Help!

  Hi girl Jeffs.

  I suggest you try the following steps:

  Step 1: This question could be associated with video filters in windows movie maker:

   

  Create a movie with reporters off and then try to publish

  To turn off the filters, follow these steps:

  In windows movie maker

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  See the link below for more information on the audio filters video\

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Step 2: Try to reduce the speed of DVD burning in windows DVD creation and check, see the link below for the steps

   

  Change Windows DVD Maker DVD-video settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

   

  For more information, see the link below

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.