Impossible to get an overview on the device (iPad)
Hello
I followed the steps as described in the help to get a glimpse of a folio directly on the iPad, but I have only the desktop Preview in the menu dropdow.
Here is what I tried:
1 phone drive was launched before the InDesign connection and set to Viewer Adobe root
2. on the iPad, I launched a custom application built with v18.
3. when I launch InDesign, drop-down the menu preview shows only the desktop preview
My Panel folio version is 7.0.5.18.
What's not?
Thanks for your help.
I did not build the custom Viewer...
Now it works
Tags: Digital Publishing Suite
Similar Questions
-
"I CAN'T DISCONNECT MY SEAGATE EXTERNAL DRIVE I GET A MESSAGE SAYING 'THE DEVICE' GENERIC VOLUME ' CANNOT BE STOPPED NOW, TRY THE STOP DEVICE LATER, HELP PLEASE
Hello
· What is the service pack installed on the computer?
· Do you remember any recent changes on the computer?
Follow the steps listed in the link below: problem ejecting USB Mass Storage Device: http://support.microsoft.com/kb/555665
-
What is the GUID that we get everything by releasing the device by entering the password?
Hey guys,.
I use a class that implements GlobalEventListener. What is the GUID that we get everything by releasing the device by entering the password?
Concerning
Raki
The list of public events can be found here:
The system global events
http://supportforums.BlackBerry.com/T5/Java-development/system-global-events/Ta-p/444824
Note that the release event is which are listed there, but you can capture this event using the PersistentContentListener.
-
Get exception to restarting the device.
I made a request in which several threads are running. Its works fine when I install the build. But when I reboot the device, then I'm the exception.
application of the untrapped exception (150) does not have blackberry process is completed.
Can you please help me to solve this problem and the reason why I get this reboot of the device.
Check if you follow these guidelines:
http://supportforums.BlackBerry.com/T5/Java-development/detect-system-availability-on-startup/Ta-p/4...also ensure that all threads are started using start()
-
Newly build Production environment (don't use it yet)
OS: Linux redhat 64-bit 2.6.18
Cluster version: 11.2.0.4
This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs. However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR. and stop the crs shows: impossible to get in touch with the loan of cluster service.
Alerts cluster log shows below:
2014-03-25 03:50:01.429:
[crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.
2014-03-25 03:50:01.433:
[crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]
]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)
2014-03-25 03:50:02.123:
[ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".
2014-03-25 03:50:03.407:
[crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.
2014-03-25 03:50:03.411:
[crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]
The NEWSPAPER of the ASM alerts:
Wed Mar 25 03:21:49 2014
WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.
WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.
WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.
WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.
Wed Mar 25 03:21:49 2014
NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1
NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1
NOTE: check PST: grp = 1
GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071
ERROR: read no quorum within Group: required 2 found 1 records
NOTE: audit PST grp 1 fact.
NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear
NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear
GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid
ERROR: read no quorum within Group: required 2 found 1 records
Wed Mar 25 03:21:49 2014
NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)
WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.
2 node rac cluster is normal. We were able to stop the crs without force.
What should I look at to understand what is happening here?
Thanks to adavnace.
WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.
NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:
No default value is 1 M
-
Overview of the device has stopped working in Dreamweaver CM³
So, today, I launch dreamweaver to edit a few small changes for a group of project and now it says "overview of device Service is currently unavailable." Restart Dreamweaver and try again. "Now, I don't know that I've changed if I changed something else that turn my pc off. Any suggestions?
It seems that your troubleshooting steps may have been a coincidence.
I have absolutely nothing to DW or one of my browsers and overview of the device working again.
Looks like the server they use for it is back running.
-
Impossible to get a substring of the current s URL page
Hello
I have a very strange problem with the URL returned by GSF. I seem to be impossible to get a substring of the URL - the String.substring (int, int) method does not appear to return the expected results. It seems that other methods of strings (such as the indexOf (String)) seem to be operating on the chain of substring returns a part, rather than on the chain saw when the url is printed in its entirety. The corresponding code is less to:
-----
AssetApiWraCoreFieldDao wraDao = new AssetApiWraCoreFieldDao (ics);
String wrapperCurrPage = ics. GetProperty ("com.fatwire.gst.foundation.url.wrapathassembler.dispatcher", ServletRequest.properties ", true);
WebReferenceableAsset wraCurrPage = wraDao.getWra (pageId);
String theLongUrl = new String ((new WraUriBuilder (wraCurrPage, wrapperCurrPage)) .toURI (ics));
This displays the correct URL (http://www.example.com/page)
out.println ("FULLURL:" + theLongUrl.toString ());
This displays the first 25 characters of a string of unknown characters (satellitescheme://SSURI/?)
out.println ("substring:" + theLongUrl.toString () .substring (0.25));
-----
All help to work out what happening would be appreciated – as far as we can tell GSF (or maybe WCS) are originally String to behave in a non-standard way.Hi 950972,
There is little of the magic that is you fool. Basically, if you change out.println () System.out.println () you will see TWO URLS begin with satellitescheme: / /. What is happening, this is the URL which are produced by the ISU Sites still are built with a satellitescheme://...#satellitefragment. Then, what is Server RHN Satellite will process the result and replace the strange chain with one that fits your URL assembler (and in this case, you use the GSF assembler).
In your code of substring, you are breaking the special chain and are cutting the encoded URL. RHN Satellite Server does not see the prefix and the suffix combined, so it does not have to make the substitution.
That's why Your ' e see what see Your ' e.
A big question is however, why you try to process the URL generated by the API. I guess that sort of substitution will happen, but that should not be done. What you trying to do? I'm sure we can find the right way to achieve your goals.
Kind regards
Tony -
After loading and Calc'ing get an overview of the database in data error
I do my developer on my laptop and the transfer of the object on the server
I loading and calc would be about 4 years of data on Bith my laptop and the server
When I try to get an overview of the data
I get this error
The names of members in doubles with overview of the data are not supported on my laptop
is the because I clicked on allow Dup Member?
because I don't have all the DUP in my plan
and on the server, this is the error I get is
Cannot connect to the olap service
cannot connect to the Essbase Server
Essbase error 1051293
Login Failied
but I am connected and connected to the server
Please notify
Published by: level following December 16, 2011 13:26
Published by: level following December 16, 2011 13:31I'm not in front of a system to check, but have you looked at the duplicate property on your new app? I guess that the setting is saved with the .otl, but overall when copy you it.
In this case, Yes, rebuild the hierarchies is probably the way to go.
-
iCloud watch icon pays next to the device iPad Air 2. I've already paid to increase the storage size, but my iPad is not synchronizing. My iPhoneis showing the right amount of photos and I'm not having any problems with it. Recommendations on adjustment or the w parameter
Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.
Have you tried the signature to iCloud and then reconnect?
-
How to get a popup when the device is plugged into the audio input jack?
Original title - card Audio HELP
I have a small problem that should be pretty easy to answer. A quick response would be nice. I'm new on Windows 8, and when you plug a device into the audio jack, a box used for poster asking which device is connected. Now that the box appears when I plug in a device. How do I get it to appear again? I have Windows 8, with player realtek HD audio. More info can be provided.
Hello
This problem can occur because of incorrect audio settings. Let's try a few steps to solve this problem.
Method 1:
As you use Realtek HD Audio, I would suggest trying the following steps and check if it helps.Enable auto-popup
a. press the Windows key + X, choose Control Panel, select hardware and audio.
b. scroll and select Realtek HD Audio Manager.
c. click the icon for folder just above and to the right where it says analog panel back and just below the device's advanced settings.
d. click Activate dialog popup automatically when the unit is plugged in.
e. click OK twice.f. now, restart the computer and check the issue.
Method 2:
If the problem persists, I suggest you to set the headphone or speaker that you connect as a default value, and check if it helps.(a) right click on the volume icon in the system tray and then click on "recording devices".
(b) right click on the space empty in the window pop up and then select "Show disabled devices" and "Show disconnected devices".
(c) right click on the headset and then click on 'Activate'.
(d) (d) mettre put out the microphone, then choose "set as default device".
(e) click apply and Ok.
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
get an overview of the tools, the default 'on' button
Is there a way to put the Preview on a tool button to always be on? It seems strange to have to turn it on whenever I use a tool. I looked under preferences, but did not see an option for this.
Nope, think about the overhead of trying to get an overview of all the elements of all the time.
-
Hello
I use the Version of Android Samsung Galaxy Tab 3 (SM-T210) 4.1.2. The folios were not displayed and I get a black screen, despite the fact that I could download the latest android version Adobe Content Viewer (3.3.0.0.87854), the Android device has been detected by Adobe CC, capable of loading the folio in the device. I tried to reinstall the software, but it did not work.
It can also help to mention that I can't view files of DPS App advice, too. I managed to download the application and its documents (folio basics, etc.), but the same black screen when I try to read them.
Are there programs that I need to download to make it work? Help, please.
Thank you for reading.
Our testers were watching this and I've seen the same problem. Update the firmware of the BONES of the Galaxy Tab 3 has solved the problem.
-
How to get an overview of the effects of the question slide?
Captivate 5
Win XPSP3
Problem: how to have an overview of the effects (such as drop shadow) applied to the objects (jpg) on a question slide.Situation: Quiz to tell 5 random questions drawn from a pool of 50 questions multiple choice.
Questions pool Panel:
I'm building the Quizzing question slides workspace.
I can view the slide and add questions and answers + jpg images that may be necessary.If I want to add a shadow to an image, I select the object (img) and place you in the effect controls panel.
I add a drop shadow and can make adjustments, BUT the effect is not visible on the slide.
The Live Preview button is grayed out and unavailable.
Overview of the toolbar options are...
F3 slide... Does not show the effect.
F4 project... would take too long AND would be not safe to view the slide at which I had added the image effect.
F12 browser... shows the entire project with 5 random questions but not necessarily the specific slide.Am I on the Filmstip Panel:
There are several options preview...
F8 this slide... If I select a blank Question slide at random, it shoots a question of the pool of 50, but not necessarily that I'm working on.
F10 then 5 slides... same problem as F8Unacceptable workaround solution:
I can create another pool 'test', containing one question.
Copy slides edited to "test the pool and the preview with F8 or F10.
A lot of extra work...Then the effect works and would weigh on the finished quiz... BUT... I can't (without a lot of P'ing on) Preview and adjust effects applied to a question slide.
Someone at - it ideas?
Concerning
Frank
If you want to test the effects on a particular slide of your pool of the Question, and you don't want to publish all slides to see it, just click with the right button on the slide in the question pool and select move Question to > the project main.
Then, you will be able to preview the effects as with any other slide. When you know that the slide is over, just get him back in the Question pool.
-
How to get a list of the devices USB connected
Hello
I am looking for a simple function in labview to progammatically for connected devices scan and list them.
This application concerned the devices of all types: game controller, network, mouse, printer, storage media layout accessory...
.NET offers a solution?
Thank youEric
Find in french
-
I went to the automated correction, it but still no change
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Please make all below even if you have done some before as it is often the set of operations which solves the problem.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Does anyone else have a problem with the left speaker is much lower than the right?
Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?
-
Satellite A350 - can't access internet
I have a new Satellite 350 running under Windows Vista (SP1). I am unable to access the internet despite the recovery disk, disable firewall and antivirus. The computer comes with much unwanted preloaded software. Software Toshiba Config finds no con
-
where can I download last version of the fast web software for the HP Pavilion dv6-3020ee
Hello Any body can help me where I can download quickweb software latest version for windows 7 64 bit for my HP Pavilion dv6-3020ee Thanks for help
-
BlackBerry Smartphones UNIQUE SPACE IN the list of contacts
HOW TO SINGLE SPACE IN MY LIST OF CONTACT´S? I TOO SEPARATED FROM EACH OTHER WITH DOUBLE LINE SPACING.
-
How to install photoshop cc by cloud
How to install photoshop cc through cloud?