Impossible to get Flash install

Similar Questions

• Equium A200: impossible to get Vista installed on the new HARD drive recovery

  Hello

  After a failure of the HD I bought a Toshiba no AF HD which is defective
  Now that I had to buy a replacement HARD drive that is a player of AF but no matter how hard I try, I can't recovery Vista Home Premium software to install

  I get an error "Windows cannot configure Windows" or something like this message.

  Pointers would be most useful.

  Thank you, Tim.

  Usually, is not a big problem to install the Toshiba Vista image using the new HARD disk.
  But I've already read in different threads that in the case of much larger hard drives the recovery procedure could not complete successfully.

  In which case you would not be able to complete the Vista installation by using the recovery disk, you can try to install the system using the Microsoft disc. In this case I recommend you take the Win 7 OS. Its much better than Vista OS.

• Impossible to get WMDC install on WINDOWS 8

  I downloaded the 64-bit version (even though it says that it is only compatible with VISTA), and whenever I try to run the program - it is placed in memory and SEAT!  No treatment, no message, NOTHING!

  A few times I thought that I would be sick and let it go awhile.  After a few hours - I thought that it is reasonable to assume that the program was just too much space in the TASK MANAGER - and will not go forward.
  I NEED to get this application installed, so I can continue my development.  (Windows Mobile applications)  Without the WMDC, I am unable to transfer my programs on my mobile device (scanner MC9190.)
  Help!

  Hi Robert

  These are the consumers for Windows 8 forums.

  If you are a developer, please post this question on the developer support forums.

  Development of Windows Mobile forums:

  http://social.msdn.Microsoft.com/forums/en-us/home?category=smartdevicedevelopment

  Concerning

• Impossible to get msi install to work

  I use DC 15 piece downloaded since the LWS.  I create an STD with the Customization Wizard and save the transformation to the bootstrapper folder.  I can run successfully using this command on the command line (command line need because we deploy via Dell Kace):

  1. Setup.exe /sALL TRANSFORMS = "AcrobatDC_LWS.mst"

  With previous versions (XI), we have successfully used this string:

  msiexec /i "AcroPro.msi" TRANSFORMS = "AcrobatDC_LWS.mst" / qn "

  It does work on my Windows 10 VM test only the setup.exe method.   Oddly enough, the msi method works when I test it on real hardware locally.

  Any suggestions?  It is not mandatory that make us this work just want to know more about why it works or does not work and why.

  Thank you!

  Yes, that worked.  I can't make it work with the MSI.  As someone explained, apparently to do with C++ Redistributable is not installed.

• Impossible to get Vista SP2 installed

  Impossible to get SP2 to install on my windows vista 32 bit

  Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Service Pack 2 for Windows Server 2008 and Windows Vista
  http://TechNet.Microsoft.com/en-us/Windows/dd262148

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How can I get flash player to my Samsung galaxy tab 4?  Whenever I try to install it, it tells me that it is not supported?

  How can I get flash player to my Samsung galaxy tab 4?  Whenever I try to install it, it tells me that it is not supported?

  Hi karens32402644,

  Flash Player is not supported on any mobile device (Android, Blackberry, iOS, Windows Phone).  Flash Player is only supported on Windows and OS X operating systems.

  --

  Maria

• Cannot get Flash Player installed 10.2.153

  Windows XP SP 3 32 bit I have read several different threads and have very similar problems getting Flash Player installed. I tried the two removal of the program to add / remove programs and uninstall program Adobe. I rebooted between uninstalls and installs and install again after. I tried to install IE 8 and FireFox doesn't seem to work. I run the Flash/subject and he did not recognize that Flash Player is installed. I checked the "Kill-bit" and it is not set. I've updated the registry, remove entries of Flash Player in HKEY_LOCAL_MACHINE\SOFTWARE\Macormedia\FlashPlayer - FlashPlayerActiveX and FlashPlayerPlugin after uninstalling Flash Player and also remove the Flash folder in C:\WINDOWS\system32\Macromed and then reboot and retry the installation of Flash Player, nothing helps. It's very frustrating, especially when this user really needs to use Flash Player as part of his work. Please help.

  Thanks again. The Shockwave Flash Object is not installed and it seems that it is acknowledged that exact key, then the Kill-bit is set.

  The plugin for FF is correct.

  Go back to the thread of Kill bits and look in the Post #4. Below are the directions. The file you want to extract this zip file is the one you want to SAVE on your desktop. Then close all the browser windows, disable all antivirus and run this file.

  When that finished, Reboot (restart) your computer and re - activate your AV.

  Who should take care of it. Then, go to the website of test with IE and see if you can see the animation of the Flash Player logo.

  Thank you

  eidnolb

• Help, I can't get Flash Plyer to install.

  I have been working on it for 7 hours and cannot get Flash Player to work.

  I have IE 9.0.8112.16421, Windows Vista, the disabled McAfee antivirus and firewall and you are running as an administrator.

  Uninstalled Flash Player (he did appear on my installed programs, but when I checked with checker Adobe FP, he has not shown as installed). I get a notice that says I have to install the latest version of Flash Player.  Tried to update IE IE improved 9.0, but I get the notice to install FP.

  I stop and restart with all programs closed everywhere including the toolbar.

  Started Installer Office administrator and is FP went through download manager and then install 10 FP. I get the message indicating that installation is complete.  I quit and restart.  But PS does not work.

  Verified internet tools - on medium and the internet security to medium.

  Is there a problem with Flash Player 10 and IE 9.0?

  Can anyone help?

  faneboda1 wrote:

  Started Installer Office administrator and is FP went through download manager and then install 10 FP.

  Is not sensible; If you saved the installation program on your desktop, then then the DLM does not come into play.

  A few questions:

  • What is your version of Windows, and it is 32-bit or 64-bit?
  • What files do you have in C:\Windows\system32\Macromed\Flash (32-bit) or C:\Windows\syswow64\Macromed\Flash (64 bit)?
  • on IE, tools, add-ons, you have the Shockwave Flash object, and it is enabled?
  • You can see the animation Flash (red rotation 'F') to http://www.adobe.com/software/flash/about/ ?

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• How can I get Flash to play in Firefox 14.0 on Android?

  I have plugins enabled in Firefox on my Motorola Atrix 14.0 and also have Adobe Flash Player installed 11.1.111.10, but the Flash does not load in Firefox. Instead, I get the error message: "a plugin is needed to display this content." My plugin for "Tap to play" layout instead of Enabled does not solve the problem. I've uninstalled and reinstalled Flash and Firefox, but it does not solve the problem either. I can, however, get Flash to load for the same site in Dolphin HD. The site I've tried today is http://www.greatamericanrestaurants.com/Carlyle/.

  Flash is not supported on the Atrix and other features of Tegra 2 chipset. https://Bugzilla.Mozilla.org/show_bug.cgi?id=703056

• I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP

  Question
  I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP. Thank you

  --> Updated Firefox to version 10.0.1

  • How to download and install Firefox on Windows

  Follow the suggestions mentioned in the section "Flash does not work properly or will not update" in the following article:

  • Flash Plugin - maintain and troubleshoot

  Check and tell if its working.

• Have not been able to get flash since the upgrade to 7.0.1 using the Linux Debian operating system.

  I was not able to get the flash player since the upgrade to FF 7.0.1 on Debian Linux. I followed the instructions in "How do you install the Flash plugin? (https://support.mozilla.com/en-US/kb/installing-flash) several times.

  As I said this is a problem since the last update. I was able to get flash working in earlier versions. Flash works in the Debian version of FF "Iceweasel".

  You are running a version of Firefox 32 bit or a version of Firefox 64 bit-to-bit?

  You must use the same Flash plug-in to make it work (32 bit Flash with 32-bit Firefox).

• My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  Question

  I have another type of problem with Firefox

  Description

  My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  This has happened

  Each time Firefox opened

  Only a few weeks ago, (tried everything)

  Troubleshooting information

  ?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Adobe PDF plugin for Firefox and Netscape
  • Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/

• Watch Flash install drive upward

  It was late... I accidentally installed the latest version of Flash Player for mac on my pc :/ So, flash player does not have to download that I need. I tried to install the windows version, but it says I already have the latest version. I tried to uninstall the mac version, but it is not possible to uninstall. I tried the system restore, but my pc ran into problems. I undid the system restore, but now I'm back where I was. I need the windows version of flash player not the mac. Any suggestions?

  The Mac version wouldn't install on Windows, if something happens.  Most applications that use Flash Player do by incorporating an Internet Explorer window in the program.  If you have Flash installed in another browser, that wouldn't help.  Using IE, go to our download page: http://get.adobe.com/flashplayer and launch the installation.

  If you are on Windows 8 and you use older applications, it can no longer works.  Flash Player is built directly in Internet Explorer on Windows 8 and higher, but the application expects things like the way in which they were on Windows 7 and below.  There is not really a way to get around that.

  To give you some useful tips, I'm going to need learn more about your computer and your browser:

  https://forums.Adobe.com/thread/1195540

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M