Impossible to get higher resolutions to 1080 p on my precision M3800

Similar Questions

• Impossible to get good resolution on external monitor for laptop

  I am struggling with this situation of resolution of external monitor for the past two weeks. Since the research I did, it is a very common question; However, I did find a solution. I tried all the solutions have not been successful. I hope someone here can help you.

  Asus K50IJ laptop

  Win 7 Home Premium 64 - Bit SP1

  Intel Core2Duo T6600

  4 GB OF RAM

  Mobile Intel 4 Series Express Chipset Family

  Monitor is Samsung SC750_S24C750P connected with VGA cable (laptop doesn't have a HDMI output)

  I reinstalled the drivers for the graphics card; current driver is 8.15.10.2302 of 11/02/2011

  I reinstalled the drivers for the monitor; current driver is 1.0.0.0 11 13, 2012

  Monitor is currently appearing as "HDMI" in the Device Manager; I have chosen "Analogue" and had the same results. Now & then I see "Generic PnP monitor" in the Device Manager. whenever I see it I uninstall it.

  Bottom line is this: settings keep bouncing everywhere. On rare occasions, I saw the picture I want on the external monitor; When I close the lid on my computer (that's why I bought the external monitor - so I can get a bigger picture, not two), the resolution is 1024 x 768. When I disconnect the external monitor, I get the correct image and ratio 16:9 (1366 x 768) on my laptop screen. When I connect the external monitor I have two choices for the resolution: 800 x 600 or 1024 x 768.

  I went to the Intel graphics properties tool and set a resolution to 1920 x 1080 at 60 Hz - 32 bit - proposed by Samsung for their monitor. Result 7 choices of resolution, no '' recommended '' and the higher tag 1366 x 768. I can live with 1280 x 720; When I choose this resolution or anything higher, the laptop screen is superb, but the image on the external monitor covers 1/4 of the screen - the rest is black. Reset the external monitor doesn't change anything.  Computer restarting does not help. Monitor disconnect/reconnect does not help. I tried this routine dozens of times.

  I really need to use the external monitor, and I need the image proportional. Is there a way to do this?

  Separated from: http://answers.Microsoft.com/en-us/Windows/Forum/windows_7-hardware/cant-get-right-resolution-on-external-monitor-for/f3680ff9-684c-428E-a6ac-74fe4171a845

  Hi, thanks for the response.

  I saw this on the Intel Web site so I tried mode extended without change.

  If I had 1366 x 768 on both screens, I would have been delighted - instead, I had two choices on my external monitor: 4:3, covering the entire screen with a distorted image, or 16:9 which covers about 40% of the screen.

  The most likely explanation I can think of is that the external monitor 4:3, I used in the past has left a kind of preference file in my computer which could not be changed, so he kept coming back to 4:3 instead of 16:9. I thought the problem might be the VGA - VGA cable, but this does not explain why I was unable to cover the entire screen on my external monitor with something other than a distorted picture.

  Using the past because I was forced to buy a new laptop. As soon as I plugged on the external monitor, everything was perfect.

  Thanks again for your help.

• Satellite P200 and screen LCD Samsung T240HD - impossible to get good resolution

  Hello
  I can't force my laptop P200 with radeon 2600hd to work properly with the Samsung T240HD LCD screen.
  Nor with the d - Sub or HDMI output.

  Using d - Sub maximum resolution I can get is 1024 x 768... monitor can go up to 1900 x 1200. With different laptop ex Toshiba P100 with nvidia Go7600, everything is OK - 1920 x 1200 goes like a charm.

  Much worse is to use an HDMI output. Photo is very poor - I can't choose any standard resolution. Worse than common crt tv (SD).

  I have a new Toshiba support web pages display drivers.
  The cables are OK.

  Any help?

  Hello

  I'm really surprised that you can get the resolution of 1024 x 768 only. According to the specifications of the laptop for P200 with ATI graphics support for external monitor resolutions are:
  640 x 480
  800 x 600
  1024 x 768
  1280 x 1024
  1400 x 1050 is not supported.
  1600 x 1200
  1920 x 1440
  2048 x 1536
  Then maybe you should try to use the original driver Samsung

• Satellite A300 - 1LT PSAGCE - Cant get higher resolution at 1280 x 800 on external monitor

  I have toshiba Satellite A300 - 1LT PSAGCE and I plugged the monitor additional profeccional LP3065, but I can't get the 1280 x 800 resolution and it works on HDMI, via the VGA output, I get only a black screen.

  Any suggestions?

  It is always an issue with external screens. Most of them have very high native resolution, and because GPU performance limited to external displays, there is often a problem.

  Unfortunately, I was not able to find what is the max resolution for external displays, but your LP3065 has 2.560 x 1.600 as max resolution, right?

  Can you please tell us what OS you are using? The Toshiba support page display driver you are using.

• Tecra 8100: Can't get high resolution - video controller driver?

  Hello

  Anyone can answer the question?

  I have a 8100 Tecra which was under Windows 98. I upgraded to Win2000P but I can't get the right amount of colors or greater than 600 x 800 resolution. Also, I can't load the former driver of BT's broadband services.

  In Device Manager, it is required for the video controller (VGA Compatible). I searched the site of Toshiba for a suitable download and can't find something like this.

  Does anyone know if the solution to this problem exists on this Web site or if Toshiba can send me a disc with the necessary info.

  Another idea of the problem is that it may need a mother board driver, if what can be downloaded?

  Sorry if it's vague but I am writing this on behalf of my stepfather, so it is second hand information.

  Any help would be greatly appreciated, thanks

  Hey Buddy

  Looks like you a little confused re.
  I think I can help you

  So to me it looks like a missing display driver. What do you think?
  Did you install the display driver for W2k?

  On the European Toshiba driver page I found a drivers needed for W2k and the display driver is also available.
  There are 2 display drivers, so check everything first to support it.

  You mentioned the driver BT broadband. Did you mean Bluetooth?
  To my knowledge this device does not have Bluetooth support.

• Aero-how can I get high resolution?

  I closed my computer because of move. Re-connected to the power, the resolution of the screen becomes flat (1280 X 1024). Please help me to get back to normal.

  Your message is in the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).

  Thinking about ask you for help in the Windows Forum: http://answers.microsoft.com/en-us

  On the computer that I use now, I can right click on the screen, left click on properties, click on settings and then adjust the screen resolution... you might want to see if it works for you.

• Background image extends all the way to higher resolutions

  I created a web page and my client wanted a slideshow to meet throughout the site with the top scrolling content. I thought I did it correctly because it was beautiful on each monitor until I saw on higher resolution than 1080 p. When I have plenty of screen it the bottom of the picture ends and there is space. I have attached a picture.

  The website is killerspirit.net

  I was not on this subject the right way? The bottom must be static, while the content of the page scrolls on it so I made a slideshow that I extended edge of the page. I didn't know how else to do this. Any help would be appreciated.

  

  I found this site for example:

  Paddymazz Productions

  It would be just like that except a design of a page with the content of the scroll on the background image.

  Hi Patrick,

  Muse does not sensitive site because of which when you view the site on different dimensions, the site will make differently.

  Can you confirm the height of the slide show you have inserted in the background and can you try to increase the height and check if it solves the problem?

  Kind regards

  Akshay

• Impossible to get resolution of 2560 x 1440 on external monitor on T410 with Nvidia NVS 3100 M

  I have a T410 with Nvidia NVS 3100 M with the driver version 189.55 connected to the external Acer monitor capable of 2560 x 1440, connected with DisplayPort cable. But, I can't get higher than 1920 x 1080 resolution. What should I do?
  Thank you

  I was using DisplayPort, but it made no difference. Finally, when I've updated my driver Nvidia lenovos site, it worked perfectly. Thank you

• How to get a higher resolution on my Vista computer?

  I get a message that "I NEED a HIGHER RESOLUTION" to learn more...  How do I do that?   In addition, my computer screen only showed half lower of the screen for the last month or two (as long as the message made their appearance).  Could they be related?  We are older and computer illiterate.  Thanks for any help you can provide.  HP wants me to ship my monitor their review and he would be gone for 3-4 weeks.  I'm sure there is an easier way!  Again, (I have Windows Vista) thank you.  MsByoo

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

• Unable to get the high resolution on the external display.

  Just upgraded my Mac OS of Sierra and now my LG Ultrawide is 1920 x 1080 and in the display preferences, I can't find an option to get the 2560 x 1080 recommended.

  If you open the display preferences, then press on and hold the Option key, and then click scaling options are available?

• Toshiba NB500 cannot get a resolution higher than 800 x 600 on external monitor

  HI :)

  I have a Toshiba NB500 Notebook and I wanted a bigger screen, so I had a monitor SDM-HS74P and plugged.

  I can't do the work for any size other than 800 x 600, but I'm sure I should be able to get better resolution than that.

  Where can I download the correct driver, please?
  Mark

  > Where can I download the correct driver, please?
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  -Laptop
  -Toshiba
  -Toshiba NB series
  -Toshiba NB500

• Impossible to get a maximum resolution of 2560 x 1600 on external monitor using DVI with Optimus video T420s

  Hello

  I have a T420s with Nvidia Optimus graphics card. I also have the ThinkPad Mini Dock Plus Series 3.

  When I tried to drive an external monitor via DVI, I can't get the full resolution of 2560 x 1600.

  I searched the forums and found several threads expressing problems with the implementation of the resolution of 2560 x 1600 per display port. Engineering even issued a new nvidia driver to solve problems. (http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Unable-to-get-max-resolution-of-2560x1...

  I uninstalled my intel/nvidia drivers but also installed the latest lenovo driver according to the instructions on the previous post and I still can't get the full resolution of 2560 x 1600 on the DVI ports of the docking station. I tried two DVI ports on the docking station, and it still does not work. I tried enabling Optimus, discreet mode mode, etc... Nothing helps.

  However, if I try to drive the external monitor via the display of the docking port, I can get the complete resolution of 2560 x 1600.

  Anyone have any suggestions on how to fix this so I can use the DVI ports on the docking station?

  Thank you very much for the help!

  dvi on the dock port is single link dvi and not dual link dvi, as such, it supports WQXGA or WQHD resolution.

  In order to use the resolution WQXGA resolution, you must use the displayport, if you monitor is not a displayport then you must use an active displayport to DVI.

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• Monitors high-resolution produce unreadably small fonts in software from third-party manufacturers with Windows 7 Professional.

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Xeon E3 1226 v3 3.30 GHz 33 ° C
  Technology 22nm Haswell-WS
  RAM
  16.0 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  LENOVO SHARKBAY (SOCKET 0) 28 ° C
  Graphics
  LEN E2323swA (1920x1080@60Hz)
  LEN E2323swA (1920x1080@60Hz)
  2047 MB NVIDIA Quadro K620 (NVIDIA) 40 ° C
  Storage
  931GB Western Digital WDC WD10EZEX-08M2NA0 SCSI Disk Device (SATA) 34 ° C
  931GB TOSHIBA external USB 3.0 Flash DRIVE (USB (SATA)) 33 ° C
  29GB SanDisk Cruzer Glide peripheral USB (USB)
  Optical drives
  HL-DT-ST DVD-RAM GHC0N SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  The default resolution and "recommended" for my two monitors lenovo is 1920 x 1080. I have a new system and I tried for a few weeks now to something to work with screen resolution and third-party apps. I am under W7 Pro right now, but will soon be getting to 10.

  The high resolution is not a problem in 7 with any Microsoft stuff. With the help of a custom of the DPI setting takes care of all the native stuff. Some third-party applications can be set as well. For example, Corel Photo Paint X 7 has bars of detachable command with command icons that can be set to small, medium or large. When the size of the icon is changed, the size of the font adjusts accordingly and it is perfectly feasible, acknowledging the icons or by reading the text. It is perfect for this dual screen system and works like a charm.

  However, most of other software companies are not quite as respectful of their clients. Bryce, formerly owned by Corel, but now DAZ despicable, is not removable toolbars and there is no options available to adjust the sizes of icons in order. Even if preferences to provide an engaging, multiple monitor option not to release the toolbars or increase the font size. It only opens the Bryce "Labs" in the second monitor in a position at the end of the dialog box, half of the Cup.

  It also applies even in a top of the range of applications such as VIEW and Smith Micro, Poser Pro. They present menus and toolbar icons that are so tiny, it is necessary to use the Magnifier Microsoft to make and which isn't real solution when your work with graphics programs. It's incredibly awkward.

  My old system, running XP Pro, SP3, which I always put in place and operational, has a screen resolution of 1280 X 768, and it displays all the software of third party very well. If I try to use this resolution with W7 and these monitors high resolution, I get a crushed image down and half on the screen which is useless. I can read everything very well, but all images are short and fat! If it was possible to type values for the height and width, using an infinite scale rather than the fixed scale that is provided by the slider over, nicked in W7, it would be possible to find a combination that worked. Then, once the wreck was set for third party stuff, the custom DPI settings Windows could take care of the native stuff.

  I had an Oracle VirtualBox running for awhile and loaded the third of things out there and it worked for awhile but it did not offer the ability double screen and, in any case, after awhile it started to get really uptight and I finally just had to get rid of.

  Really, I would be much happier if I could just load XP Pro on this machine and do run as quickly as things that made to run on it. The only reason why I got a new system was the need for more speed and muscle. But if I can't use my favorite, applications worth it?

  Is there no workaround solution that will make it possible to adjust the resolution so that the third-party applications are fully functional using all the space on the screen?

  Thank you to everyone who takes the time to read and respond.

  Since no one answered I'll provide the solution myself. Doing right thing 'upgrade' to Windows 10 has this problem of resolution.

  Other than that, getting W10 to work even at halfway was a nightmare.

• Dell inspiron 7520, how to get a resolution of 2560 x 1440 on external monitor?

  Hi all

  I have a fairly new Dell inspiron 7520, AMD Radeon HD M 7730, Intenl HD Graphics 4000. I just bought a 27 "monitor that I wanted to work on the resolution of 2560 x 1440. My monitor has only DP, HDMI and DVI-ports and my laptop has VGA and HDMI ports. I tried the HDMI, but it looks like its 2560 x 1440, but 1900 x 1080 cant handle. It's really frustrating for me because I bought the monitor with 2560 x 1440. I tried it before on other monitors by using the VGA and I managed to run 2560 x 1440. What is the solution here?

  -Can I get a VGA-DVI/DP cabel? or adapter?

  -There's another device that I can connect to?

  -I have to take my laptop and get the upgrade? If Yes, where can I do this in China? So many false places here and I wanted to take the official Dell store - but can't find in Shanghai.

  Thanks, 1 million - that's very frustrating. Can't believe my fairly new dell laptop can't handle 2560 x 1440. My 4 roommates macbook air still for this. Another problem, I love my computer dell laptop.

  Thank you.

  Ivar

  I missed the part, no DVI.  Use the VGA/DVI, you need a set-top box power - VGA is analog, digital DVI.  You may not use a single cable.  Unfortunately, I do not think that these will run a very high resolution.  They are all limited to the 1920 resolution.

  It is a system relatively low-end and low-end systems have their limits - the resolution that you want to run is a high-end - need you a notebook of top line (with a displayport) run the desired resolution.