Impossible to get iMovie to 'find' my videos in PHOTOS

Similar Questions

• MAC - impossible to find "Pictures folder" / Iphoto photo library and open the Iphoto Application at all

  Hi all

  I have Apple devices for a few years now, but I still find it difficult to understand the system. I want to put an end to that, so I finally registered.

  I try to look at the tutorials and read the forums, but I can't find concrete answers to my situation.

  First of all, in my application of Photos of my MacBook, I remove hundreds of photos and videos, then I go to recently deleted screen and I delete them all permanently.

  However my disk space is the same before under 'Storage' summary when I check "to about this Mac". I restarted the Mac and waited for days, the space does not release upward.

  Then I read in a forum and found the following answer:

  Your photos has not deleted because they still exist in iPhoto or Aperture, whatever you use. Photos saves disk space by creating links to the already existing files in iPhoto/Aperture, rather than duplicate. This means that if you want to delete a file, you must make sure that it has deleted all.

  If you can live without ever using iPhoto/Aperture once again, go to your Pictures folder and delete iPhoto Library and Aperture Library . In this way, the only copies of your photos will be those photos, and removing free space on your computer.

  
  

  The questions are the following:

  
  

  (1) after reading this, I decided to look it up in my pictures folder in the Finder to locate the iPhoto library, however it is not there on the left side, after reading the forums, I still cannot locate the iPhoto library anywhere.

  (2) in case I finally find my iPhoto library and delete it, are the images that I see now in the deleted Application Photos?

  (3) another curiosity, when I try to open IPHOTO, the following message appears:

  

  And then after trying the 'search App Store':

  

  I did not need to actually use my iPhoto or App Photos in particular, I do not yet fully understand the difference. I want to just my photos to be stored in ONE place and when I take hours to remove them permanently, get my rear space and do not learn, they still exist elsewhere (iPhoto library).

  Also please help me understand what am I supposed to do with the iPhoto application now that gives me these error messages.

  Thank you very much!

  (1) after reading this, I decided to look it up in my pictures folder in the Finder to locate the iPhoto library, however it is not there on the left side, after reading the forums, I still cannot locate the iPhoto library anywhere.

  The images folder must be manually added to the sidebar.

  Open the Finder preferences:

  • Click anywhere on the empty office to bring the Finder to the front, then go to the Finder menu in the main menu bar, open "Preferences".
    Click the tab of the sidebar and add all the items to the sidebar, you want to see.

  

  Now, open the images in the sidebar folder in the Finder.  Is your photo library in iPhoto there?

  Then drag it to an external drive to make a backup copy, then delete it and empty the trash.  Accidentally delete the photo library.

  (2) in case I finally find my iPhoto library and delete it, are the images that I see now in the deleted Application Photos?

  No, the photos in your library of Photos and the iPhoto library are separate files.  It was created by hard links.

  Hard links are new files, which use the same entry in the table. They store the contents in blocks of same on the disks, so the entries are not duplicated, but if you remove one of the linked files, the others will remain. The storage will be released, when the last linked file has been deleted.

  See this link: Six colors: the (hard) link between iPhoto and photo

• iTunes can't find the videos

  When I click on home video in my iTunes (Yosemite) I get this message for all videos: video "(tous les noms de vidéo cliquez ici)" could not be used because the original file cannot be found. " You want to locate?

  I have no idea where to locate. I hope that they have not disappeared.  If I find one more time, I will download them all to a separate hard disk, because it seems that Apple will lose them for me one day (maybe today).  I tried a time machine "restoration" of iTunes from a bygone era, but it says it cannot restore iTunes because it's an OS X app "Basic."

  There are a bunch of files in your iTunes Media to different media groups folder.

  A backup is essential at any time.

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• get the blue screen for video ati3duag.dll and also 0x000008E (0xc0000005), 0xBF0C8855.

  ERROR MESSAGE
  I get the blue screen for video: ati3duag.dll, BFO72000, time stamp 33fb6e2af. How to find & fix the problem? Speak not disable bios memory.

  Also I get: 0x000008E (0xc0000005), 0xBF0C8855.
  This happens when I want to watch a video.
  

  
  
  I use windows XP Home Edition

  Thank you
  Laurie
  

  I guess you have a problem with
  your video driver. You may want to update or
  It may have been a version that your
  hardware has problems with.

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• Can't find any video game capable windows modules 10

  I tried to clean install the graphics drivers, power mode changed, off avg, re installed the software and my graphics processor preferred for the creation of value, but I keep getting the

  Error "Premiere Pro could not find capable video game modules

  I can't get this software to work. I have a HP envy i7 Intell 2.50 GHz, 16 GB of ram windows 10 House

  Contact Customer Care - Premiere Pro and ask for video queue.

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

  My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

  I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

  A simple fix Terminal can take care of that.

  Open Terminal (you can just tap Terminal in Spotlight to find it).

  Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

  Press enter, give your password if requested, and then try again. You may need to restart your Mac.

  Gene

• Premiere Pro could not find capable video game modules

  Hi all

  I use Adobe first Pro CC and have updated to the latest version and I get a "cannot find module of the video" well tried all the solutions proposed by Adobe: http://helpx.Adobe.com/Premiere-Pro/KB/error---preludevideo-play-modules.html

  Previous versions of Premiere Pro works perfectly, but when its updates, it just fails.

  My laptop has an i7-4700HQ processor and running a GeForce GTX850M GPU.

  I really need to get this race to the top as soon as possible because I have a presentation in 5 hours.

  Any suggestions?

  I'm on WIndows 8.1

  It turns out that it was a driver problem. Had to completely uninstall all my video drivers and do a fresh install. Just display for future reference.

• First CC/Nvidia card - could not find capable video game modules

  I just bought a new laptop Toshiba Qosmio x 75 with a 770 M Intel HD 4600 Graphics and Nvidia graphics card.

  Data sheet:

  • 8.1 Windows x 64
  • Intel i7-4700MQ 2.4 GHz
  • 16 GB of Ram
  • 2 500 GB @ 7200 RPM SATA

  I have CS5 and wanted to use first CC. downloaded PPCC compared to clouds and open a few books on CS5 a few time s. Had to add card for laptop for the best card CUDA faster to be recognized and everything was fine. a few reboots later I received an error "Unable to find capable video game modules" and were not able to open PPCC since. He stops on Vignette.aex.

  Opening first CC was obviously using the map intel, I have tried to use the Nvidia card so I assigned the best 3GB memory card to the MCCP. I could open some time after.

  I tried:

  • CC PD uninstalled and installed several times.
  • Uninstalled and installed 770 M Nvidia driver several times. 770 M driver updated several times.
  • changed to 'use as administrator'
  • GeForce GTX 770Mcards adding"this should be done from AFX and other programs. It was recognized even in first so that I could always open the program (before the boot error)
  • tried to change the "compatibility" in previous versions of Windows (found some corrections on adobe threads)
  • "User profile-name" in "Documents/Adobe/PremierPro/Profile' compensation

  I have read around forums Adobe, searched google and you tube, and it is a problem that is underway. I have not been able to find a definitive answer from adobe or anyone else.  Seems people are just throwing ideas out there and some work and some never get their determination of the question and give up. This does not help me solve the problem and I need a list of tasks that will help me to resolve this problem immediately, please.

  I could never open the application by modifying settings or deleting and then reinstalling the software until I went back to a past point since before the issue of restoration. It works and has a few weeks. I think that the problem results from the Intel graphics card driver update. I have 2 graphics cards.

  I wonder in this sense, since the restoration, but I don't do anything until I get this project. Too risky. Certainly a question that must be resolved with Adobe communicating CC equipped with part 3. John T Smith's right, I've seen several issued reported with two cards, but it's hard to say having so many problems with CPU chart.

• Impossible to get a substring of the current s URL page

  Hello
  
  I have a very strange problem with the URL returned by GSF. I seem to be impossible to get a substring of the URL - the String.substring (int, int) method does not appear to return the expected results. It seems that other methods of strings (such as the indexOf (String)) seem to be operating on the chain of substring returns a part, rather than on the chain saw when the url is printed in its entirety. The corresponding code is less to:
  
  -----
  AssetApiWraCoreFieldDao wraDao = new AssetApiWraCoreFieldDao (ics);
  String wrapperCurrPage = ics. GetProperty ("com.fatwire.gst.foundation.url.wrapathassembler.dispatcher", ServletRequest.properties ", true);
  
  WebReferenceableAsset wraCurrPage = wraDao.getWra (pageId);
  String theLongUrl = new String ((new WraUriBuilder (wraCurrPage, wrapperCurrPage)) .toURI (ics));
  
  This displays the correct URL (http://www.example.com/page)
  out.println ("FULLURL:" + theLongUrl.toString ());
  
  This displays the first 25 characters of a string of unknown characters (satellitescheme://SSURI/?)
  out.println ("substring:" + theLongUrl.toString () .substring (0.25));
  -----
  
  All help to work out what happening would be appreciated – as far as we can tell GSF (or maybe WCS) are originally String to behave in a non-standard way.

  Hi 950972,

  There is little of the magic that is you fool. Basically, if you change out.println () System.out.println () you will see TWO URLS begin with satellitescheme: / /. What is happening, this is the URL which are produced by the ISU Sites still are built with a satellitescheme://...#satellitefragment. Then, what is Server RHN Satellite will process the result and replace the strange chain with one that fits your URL assembler (and in this case, you use the GSF assembler).

  In your code of substring, you are breaking the special chain and are cutting the encoded URL. RHN Satellite Server does not see the prefix and the suffix combined, so it does not have to make the substitution.

  That's why Your ' e see what see Your ' e.

  A big question is however, why you try to process the URL generated by the API. I guess that sort of substitution will happen, but that should not be done. What you trying to do? I'm sure we can find the right way to achieve your goals.

  Kind regards
  Tony

• Premiere Pro CS6 could not find capable video game modules.

  Hello everyone. I just bought the Production Premium CS6 and when I try to start the first I get this error message: "Adobe Premiere Pro could not find capable video game modules. "Your video please put updated display drivers and try again." This message comes after she tries to load the file importerquicktime. I tried to uninstall the software and reinstall anything will do. In fact, now I get also three other error boxes that all say: ' LoadLibrary failed with error 126: the specified module could not be found. " I did an extensive search online over the past two days to try to solve my problem myself... but nothing, I tried worked. I even read through all the threads already posted on these forums. Does anyone have any suggestions? Before posting, here are the things I've already tried as well as some technical:

  HP Pavilion dv7 Notebook PC

  Windows 7 (64-bit)

  8 GB RAM

  Intel Core i7-2630QM CPU @ 2.00GHz

  F.13 BIOS (25/04/2011)

  AMD Radeon HD 6700 M Series (driver version: 8.980.0.0)

  Mobile Intel HD Graphics (driver version: 8.830.6.2000)

  • I tried to uninstall the software.
  • I tried to update my drivers for both of the graphics cards (even if one of them do not have an update, it seems)
  • I run the software as an administrator.
  • I tried to go to the display settings and disable the Intel card. (this because low resolution that is unexceptable)
  • I went to the Catalyst Control Center and put the first to 'High Power' which is supposed to use the AMD card.
  • I open the BIOS, but there is no option to change anything graphical associates. (many people have to tell people to change switchable graphics set here, but I don't have any option)
  • I took my battery.
  • I uninstalled quicktime and reinstalled the latest version.
  • I downloaded and installed the latest version of first (as it was released the day before, I bought)

  I tried other things I think, but at this point, I have tried so many things, that I'm starting to forget. Nothing seems to work for me... I am wanting to use the first to edit this short video I want to release Wednesday, but this puts me behind. Any help is appreciated, thanks!

  BEST METHOD!

  I spent more than 24 hours to find a way to solve this problem. And that's...
  1. right click on desktop, and select switchable graphics properties.
  2. click on the Browse button and go to the folder of installation of Adobe premiere cs6
  3. Select cs6.exe first icon and click Open.
  4. set manually to high performance and click on apply.
  5. repeat the above instructions, once more and instead select premierecs6.exe, select GPUsniffer.exe, and click on open again.
  6 and set it to high performance and click on apply.
  7 enjoy CS6

• Publish Flash can't find the video on the server

  Previously, using Flash CS3 Professional, would incorporate a. M4V file (shared via iMovie) and go through the Import Wizard to give him a reading skin and ultimately publish something HTML, SWF, FLV and SWF/JS files for playback. Download these five files on our servers (or any server) allow anyone to watch these videos by accessing the HTML page.

  Now, using Flash CS4, the import process is a little different and FLV conversion does not occur. There are also no to publish. JS file and instead of the. FLV file, there is the original movie file (.) M4V). In the library pane, there is an article of FLVPlayback. When you access the HTML file as it sits on my desk (or the Office somebody in the folder with all the other items), the SWF file is and play the movie without any problem. Comes right up. However, now that all the files are moved (again, in the same folder) on a server for access via the web, the SWF file cannot find the video file.

  I even created a duplicate of the project with the encoding of the file M4V in a FLV and import this file into the document FLA; that the publication and download to the same exact results.

  That step has been added/deleted that I'm missing to make these files simply, import to convert properly and publish noctilucence so that they can be viewed that they were once on the web?

  Thank you!

  Tolleson, terry

  If it's the name of the video, then rename it to something that contains only the characters for the Web.  That is to say, delete spaces and the dashboard.

• Cannot find the video imported to download from a Web site

  I'm new to OSX and cannot find a way to make something simple...

  I have a long 5 minute video that I recorded on my iPhone, I want to send to a friend. Dropbox and iCloud are not options because I maxed out my space in both. So I tried to use one of these free Web sites (such as WeTransfer.com) to download the file and send a link. I have

  But when I click on the ' Browse... '. "to find the video, I can't find in the file system. I know it's in the "library" and I can't find that, but it won't actually let me go no matter what. When I double click Photo library, things seem to be suspended.

  How should I proceed?

  I do not use Photos, but I guess you have to export the video to Photos to a location of your choice, and then load it. I don't think that you can download directly from Photos.

• How to export video from Photos in iMovie?

  Hello

  I have Photos 1.5 and iMovie 10.1.1

  How to make video from Photos in iMovie so I can include them in the films of projects/home theater?

  The menu shows library of pictures but none iMovie content, even if pictures has the video and still images,

  

  I see no photos to export to iMovie either.

  The only idea I can think of is to drag images of Photos on the desktop and then import it into iMovie.

  Surely, there must be a better way?

  You can simply cut the video and press the sign at the bottom right there will be the drop on the line or you can drag and drop where you want to on the timeline... hope this helps.