Similar Questions

• Issue of dual sim - impossible to get two sims work

  I have a sim card I want to use for phones / SMS and the other that I want to use for mobile data.

  If I put two sim itself, it works very well.

  If I combined both and set them so that they are both on, that I want to use for the phone calls and texts does not record on its network (which is three in the United Kingdom)

  I don't know what to do. The telephone company have adjustable it so it does not work in a setting dual sim?

  Or have I just don't understand what is dual sim?

  Any help much appreciated!

  Stoichkov-

  The phone is dual SIM which means that standby, either number can receive a phone call. If you can not do mobile data and voice at the same time. You can prioritize the phone for voice or data. If prioritize you data and you surf the net and you receive a call, the call will go to voicemail. If you have a priority to voice then the call will ring through and data will stop.

  You should be able to do the WiFi and voice simultaneously.

  You can have live data on a SIM card at a time. Hope that things cleared up.

  Mark

  Forums Manager

• Impossible to get a style work table with dat Spry in DW CS6

  Hi - I hope someone can help me to get a table style to work as a Spry data set. I first put in place a beautiful table with extendable drop down:

  http://designerandpublisher.com/tables/index.html

  I then followed this Adobe tutorial:

  http://www.Adobe.com/devnet/Dreamweaver/articles/spry_creating_html_data_set.html

  For the final result, you can see that all of the style has been removed:

  http://designerandpublisher.com/tables/Spry-test.html

  Although when you click the column header, sorting seems to work great, but I obviously cannot submit this to the customer because it does not resemble the style table.

  Can someone tell me what I am doing wrong?  I thought by styling the table first and then put in Spry, I thought it would work.  I also get this data style set working for the customer because I used Spry for other things like accordions and it is easy to use.

  Thank you.

  Just thinking a little further, with stretch panels Table seems to work pretty well. Why would you want to complicate things by introducing a dataset?

• get support scsi LUNS for the data store?

  I've been delving into the different classes available to HostSystem.queryHostConnectionInfo () and none of the properties appear to contain the id of naa I see when I look at LUNS on an HBA.  How do you get to LUN support for a data store?

  Figured it out.  For anyone else who wants to know:

  I created two actions, one to return a hash of the id of naa-online data store object and another action to return a hash of the naa-online drive scsi id

  // actions
  //getDatastoresKeyedByLUN
  var o_diskHash = new Properties();
  
  for each (var scsiDisk in u_host.config.storageDevice.scsiLun)
  {
    //System.log("-> LUN: " + scsiDisk.canonicalName);
    for each (var dataStore in u_host.datastore)
    {
    if (dataStore.info.hasOwnProperty("extent"))
    {
    for each (var scsiDiskPartition in dataStore.info.vmfs.extent)
    {
    if (scsiDiskPartition.diskName == scsiDisk.canonicalName)
    {
    o_diskHash.put(scsiDisk.canonicalName, dataStore);
    }
    }
    }
    }
  }
  
  return o_diskHash;
  
  // getScsiDisksKeyedByLUN
  var o_diskHash = new Properties();
  
  for each (var scsiDisk in u_host.config.storageDevice.scsiLun)
  {
    o_diskHash.put(scsiDisk.canonicalName, scsiDisk);
  }
  
  return o_diskHash;
  
  // in workflow
  for each (var can in dstoreMap.keys)
  {
    System.log(dstoreMap.get(can).name + "(" + lunMap.get(can).canonicalName + ")");
  
  }
  

• Impossible to get webservice to work - LIVES checkVat WSDL

  I am trying to incorporate a tank, check how it works on my Web site, for the validation of VAT entries.
  This service is provided by the European lives WSDL service.
  No matter what I try, I still get the same error:

  Web service operation checkVat with parameters {xx, xxxxxxxxxxx} is not found.

  This is the last code I've tried (perhaps the fifth or sixth method experienced).

  straight from the Coldfusion documentation:

  < cfscript >

  WS = CreateObject ("webservice",

  " http://EC.europa.EU/taxation_customs/VIES/checkVatService.WSDL ");

  ws.checkVat ("xx", "xxxxxxxxxxx");

  Req = getSOAPRequest (ws);

  < / cfscript >

  < cfdump var = "#req #" >

  < cfset soapreq = GetSOAPRequest (ws) >

  Request SOAP < h2 > < / h2 >

  < cfdump var = "#soapreq #" >

  < cfset soapresp = GetSOAPResponse (ws) >

  a response SOAP < h2 > < / h2 >

  < cfdump var = "#soapresp #" >

  Where red x represent the country code and VAT number.

  I'm about to drop, three days ago to try and still no luck.
  Someone ready to hit his head with mine?

  Thanks anyway.

  I think the error is more profound than the conversion of any type. For some reason, Coldfusion 8 is ruining the web service definition.

  response = ws.checkVat ("Go", "244155576", requestDate, "name", "base10", True);

  This is probably not correct. In fact, when I run on Coldfusion 11, where the function with two arguments work, I get the error message

  "Web service operation checkVat with parameters {GB, 244155576, kills Sep 30 09:15:45 CEST 2014, True, base10 name} can not be found."

  
  

  However, looking back with fresh eyes this morning, I found the final reason why the 6-argument function won't work anyway. Your result, it returns void.
  

• Satellite L45-S7419 - cannot get device WLAN working for XP

  Hello all and ty in advance for anyone who can help.

  I have a serious issue that I have not been able to understand and finally just abandoned.

  My father has a Satellite L45-S7419 which has wifi 802. 11 b/g, built in at Bestbuy which came with Vista there is quite some time and I finally had the time to put XP on it (which, in itself, was a challenge) and I am unable to get drivers that work with the built-in Wifi.

  In Device Manager, it shows the device with a yellow "?" and no driver installed. Unfortunately, Toshiba has no drivers for XP, but fortunately (I thought at the time) realtek had drivers for RTL8187B. Who called on the site - (RTL8187B driver auto Installer Windows (Win2K/WinXP/Vista support), Win2K/WinXP/Vista driver ver.1158 1158 20/11/2009)

  I installed the drivers, but the device is not simply either recongize or it some how is not the correct drivers, because the appliance does not work.

  Does anyone have an idea what I can do? I tried everything that I can with my knowledge. I tried another way to install and uninstall the device first Manager device, installed the drivers then that the "new Device Manager" jumped upward and the device of RT8187B popped up, but still get the "new hardware found" and the right afterwards "the unit works may not properly" or something similar. As if I had just install the driver itself.

  Any help would be appreciated wildly. Ty!

  Hello

  Have you checked if the WLAN function is? Therefore, you can use the switch of hardware on the laptop and the combination FN + F9.
  Check this box!

  Can you also tell us what version of BIOS is installed on the laptop? In your case, I'd install the latest version of the BIOS. Sometimes, I could here it solves different problems WLAN. It s worth a try! ;)

  I think that, in the worst cases, you must use the preinstalled operating system (Vista). There are all the drivers and tools pre-installed so I m asking you to install another OS. Now, you need to install a large number of drivers and you must spend a lot of time for that so I always prefer the preinstalled operating system.

  Welcome them

• Equium A100-147: Impossible to get Bluetooth to work

  I bought an Equium A100-147 last week and noted in the manual it should have Bluetooth capabilities. However, I can't get this to work. I looked for my phone, and it does not pick up the computer as a bluetooth device. In the help files, it says I can set it up in the bluetooth settings in the Control Panel, but there is nothing in there. I tried to install the battery Bluetooth Toshiba, but it keeps asking me to install the bluetooth device.

  This computer actually has bluetooth abilities or not? If so, how can I get this to work?

  See you soon

  Hello

  Each unit with BT has BT label in the lower corner. Something like this http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

  If you do not find it the BT is certainly not available.

• Impossible to get ontouchenter to work

  I can't ontouchenter to work for an element node raphael.js although ontouchstart works very well. I am programming for a playbook. Any help will be welcome.

  Thanks, but I solved my problem by testing for event.target.id

• only two processors working for vmware server on windows system 7 (4 cores) intel i7 Q720?

  When I installed vmware server, resource monitor showed me two hearts was parked, and only two core worked.

  After the installation on vmware web access infrastructure shows only 2 hearts summary-general-processors.

  When I installed solaris 10 on vmware server, I saw only two core works.

  could someone how to let vmware server knows me that this machine has 4 cores, although some processors parked?

  (windows 7 is not disable cpu parking function).

  Hello

  check this discussion.

  It is the same in your question.

  Best wishes / Saludos.

  Pablo

  Please consider to assign all useful or correct answer. Thank you!! - Por favor considered premiar any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• AT100 - impossible to get my calendar to store the dates of the annual events

  Hello.

  Cannot get my calendar to store the dates of the annual events birthdays for example.
  Option gives (annual 27 July 2012), but would it be fair (27 July each year). No way to remove year so presumably won't wait that 2012 will come along! All the other choices for weekly and monthly do not specify the year.

  Annual option should I think be the same. Tried to enter next year, but comes with (year July 27, 2013) so it looks that have to enter every year which is a pain. Someone at - it ideas.

  It's my first post he hopes in the right place.

  Thank you

  Hello

  Why you n t try another Android app like for example calendar of birthday or anniversary Assistant

• Slow down the search for the data source

  For j2me so Media Player I open a connection file (in a local file) and get an inputstream and passing to the player I have no problem loading the file/search.

  On the other hand, I wrote my own simple data source wraps simply a connection file and an Inputstream, when I try to read a large file the app just crashes. I think that what the Player tries to do is read the entire file for the headers, but why is there this difference in speed?

  NM, the reason why it was slow was because I was enveloping the stream in an input stream shared

• BI Publisher for OBIEE data sources

  I know that BI Publisher can be part of an OBIEE Dashboard using a query OBIEE answers as the source data for the BI Publisher report. My question is if a BI Publisher report can have one data source other than an OBIEE answers such as a custom SQL query and still be part of an OBIEE dashboard? If possible, no matter what version of OBIEE and BI Publisher is used?
  
  Thanks for information of nay you can provide on this subject.
  
  Barry

  Hello

  data source other than a request for responses OBI can be included in a dashboard OBIEE.
  Using the dashboard objects, we can call the BIpublisher report in the dashboard.

  Thank you
  Ananth

• Planning for the Data Source

  Hello
  
  Can we use a data source to build different planning Applications. What is the use of data source... Which holds a wrt planning RDBMS.

  A data source defines the connection details, he holds connection information to a relational/db schema where is stored the planning app. It will also have the login information to essbase.
  You need a separate for each planning application data source as the relational/db schema must be separate for each application.
  The RDBMS holds all the metadata for the purposes of planning, such configuration, dimensions, structure, forms, lists of tasks etc.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Impossible to get two printers same work (MG5420) on the same network home wireless

  I bought another MG5420 this week and I tried to configure it on my home wireless network.  It's on the wireless network.  However, the canon print utility seems could not find and it always go to the original one (old).  How to make both of them work on the same time?

  Thank you for your help in advance.

  found a solution

• Impossible to get Clip + to work in the Honda Accord

  In my Honda, mode to THE, I can't get the Clip + to work.  I was back and forth between the MTP and MSC.  My old Sansa works very well.  What I am doing wrong?

  Your car stereo is probably looking for a device to MSC base. If your music has been loaded from a computer with the Clip + in MTP mode or Auto Vice, your car stereo will be probably able to find.

  If this is the case, change the Mode USB MTP setting, connect to your computer and move (not copy) all the files on the computer. Now tell-connect, switch mode MSC, reconnect and copy (and not move) the files to the player. This will leave copies of backup on your hard drive. Now connect to your car stereo and it should work.

  Note that sometimes the stereo channels is not enough 'smart' see files stored in a folder of music. If after doing the above, you still have problems, try highlighting all the folders/files 'in' you music folder and moving them to the top directory or 'root' (at the same time the music folder). So he could see them. You can delete the empty music folder if you wish.

  Miikerman also has a good point. Your car stereo will not be able to see 2 memory locations, as in the internal memory and external memory card. He reads only the files from the internal memory.