Impossible to install the debug symbols after SDK Update

Similar Questions

• Impossible to install the latest version of Microsoft Update, WIN XP Pro SP 2, get the error number 0 x 80240036

  The website has encountered a problem and cannot display the page you are trying to view. I just reinstalled my OS on a Dell Latitude D820 using the reinstall OS drive came with my laptop, but I can't install the updates mainly due to failures and Service Windows Installer error messages when you try to use Windows Update.

  It was a mistake to install IE8 before SP3. You have to uninstall it and go back to IE6!

  It is quite possible that your SP3 download had corrupted. Delete and re-upload the file .exe from this page:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  It is the name of the file you need:

  WindowsXP-KB936929-SP3 - x 86 - ENU.exe

  Size: 316.4 MB

  Value of SHA1:

  c81472f7eeea2eca421e116cd4c03e2300ebfde4

  If you need a utility to determine the value of SHA1, I recommend HashCalc:

  http://www.SlavaSoft.com/HashCalc/

  Once you have confirmed that your installation of SP3 folder is perfect, THEN you can install it (preferably while physically disconnected from the Internet). You will first need to set up a clean boot:
  http://support.Microsoft.com/kb/310353
  If you need the IE8 Setup file, you can download that from this page:
  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=43
  Yet once, upgrade to SP3, first of all, THEN to update IE6 to IE8. :-)

• Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

  Hello...

  Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

  The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

  ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
  Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

  First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

  Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

  Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

  Windows tells me that it was impossible to find a driver in the any of the archives...

  The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

  Any help would be greatly appreciated,
  Tasos

  P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

  P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

  This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

  Hello

  Regarding the sound issue.
  A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  You will need to install KB888111 and KB835221 hotfix

  With regard to the BIOS;
  Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

  Good bye

• Impossible to install the debug version InDesign CC 2015.2 on MacOSX1

  Hello

  I just downloaded CC2015.2 InDesign debug version of Portal Technology Partner Program, but I can't install it. When I open the disk image and run the updater application I get window "update failed". Someone at - it had the same problem? Solve you this problem? How?

  Heh, I figured that out. I needed a copy of CC2015.0 installed on my machine first. Now it's working. Anyway, maybe it helps someone else dealing with this problem in the future

• Impossible to install the Safari 9.0.3 update

  Hi all

  I have a MacBook Air (11 inch, mid-2013) with Yosemite 10.10.5. Latest version of Safari installed is version 9.0.1.

  When I opened the app store, it shows an update for Safari 9.0.3. When I click on update, it downloads the update, then installs updated day, and then said "Installed" in a box grayed out for a second or two before returning to the update option. When I initially tried update as well as some other updates (Firmware, iTunes, etc.) the computer says that it could not install Safari because the download may have been corrupted. But since the installation of each update separately, I did receive this error and Safari is the only thing that will not be updated.

  When I open Safari or "Get Info" on the app, it always shows the version 9.0.1. Here's what I've tried so far:

  -Logged out and Apple ID used in the AppStore (Apple ID is not required for applications Apple anyway)

  -Deleted all caches to deploy and ~/Library/Caches, restarted, trash emptied, reessayes

  -Tried to install startup

  -Fixed permissions (fixed several things, but one that linked Safari.app question recurring guard even after having been "repaired")

  -Disk checked for good measure... no errors

  -Update folder AppStore cleared in/Library/Updates

  -Remove all AppStore associated implements cache using terminals, by "open $TMPDIR... / C ' and ' open $TMPDIR... / T.

  Download page for Apple software doesn't have this update to download manually. The only step I can think that I have not tried is simply reinstall Yosemite. I'd rather not do that since I work in a school and the network is not always the greatest. In addition, Safari works totally well on version 9.0.1.

  Any ideas?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Impossible to install the Safari extensions; error message

  Impossible to install the Safari extensions; error message

  Hello

  Make sure that OS X and Safari are up-to-date.

  Open system preferences > App Store, then click on: check now

  Your profile says your Mac works v10.11.1. The v10.11.5 update is available. This is maybe the reason why you can not install the Safari extensions.

• Impossible to install the drivers of Etherner controller; SM BusContoller and USB 2.0 - ORW

  Original title: Windows 7 Home Premium.

  Impossible to install the drivers of Etherner controller; SM BusContoller and USB 2.0 - ORW.

  You are welcome. Please check the answer.

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• I bought the premier 11 elements impossible to install the shared tecnologies error message

  Impossible to install the first error of 11 items shared technologies

  Hello

  You can follow: Re: items 11 'installation Shared Technologies' first installation error

  https://helpx.Adobe.com/Photoshop-elements/KB/install-rollback-Photoshop-elements-Windows. HTML

  Let us know if it works for you!

• problems to install the debug version of flash player

  I tried to install the debug version of flash player on a 64-bit Windows 7 computer using Firefox as my browser, but got the following installation error: "the Adovè Flashplayer version you are trying to install is not the most recent version. Visit the Player Download Center to get the latest and most secure version. "Of course, I did several times and restarted my computer.

  Originally, I used the 64-bit version of Firefox (Waterfox) as my default browser, but because the debugger is 32-bit only, I switched to Firefox (32 bit). However, this did not help. Any ideas?

  Harry

  Do a clean install: How to do a clean install of the Flash Player?

• Impossible to install the SDK service experience - timeout to connect to the Package share

  According to the installation guide, I tried to download and install the SDK of Services experience using the package share.

  However, I always get an error page. After clicking on the Package share link, the browser hangs for a few minutes, the present the following error page:

  

  Try to connect using the 'local' login page does not work.

  In the server log, I found that kind of stack traces:

  28.09.2011 18:09:02 * ERROR * PackageShareServlet: Package not available Adobe sharing server (connection refused) (PackageShareServlet.java, line 306)

  java.net.ConnectException: Connection timed out: connect

  at java.net.PlainSocketImpl.socketConnect (Native Method)

  at java.net.PlainSocketImpl.doConnect (unknown Source)

  at java.net.PlainSocketImpl.connectToAddress (unknown Source)

  at java.net.PlainSocketImpl.connect (unknown Source)

  at java.net.SocksSocketImpl.connect (unknown Source)

  at java.net.Socket.connect (unknown Source)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect (unknown Source)

  at com.day.crx.packaging.impl.EasySSLProtocolSocketFactory.createSocket (EasySSLProtocolSocke tFactory.java:179)

  at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)

  to org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$ HttpConnectionAdapter.op en(MultiThreadedHttpConnectionManager.java:1361)

  at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry (HttpMethodDirector.java:387)

  at org.apache.commons.httpclient.HttpMethodDirector.executeMethod (HttpMethodDirector.java:17 1)

  at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)

  at com.day.crx.packaging.impl.proxy.ProxyImpl.doGet(ProxyImpl.java:552)

  at com.day.crx.packaging.impl.PackageShareServlet.doLogin(PackageShareServlet.java:294)

  at com.day.crx.packaging.impl.PackageShareServlet.doGet(PackageShareServlet.java:114)

  at com.day.crx.j2ee.CRXHttpServlet.doGet(CRXHttpServlet.java:112)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)

  at com.day.crx.j2ee.CRXHttpServlet.service(CRXHttpServlet.java:94)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at com.day.j2ee.servletengine.ServletRuntimeEnvironment.service (ServletRuntimeEnvironment.ja goes: 228)

  at com.day.j2ee.servletengine.RequestDispatcherImpl.doFilter(RequestDispatcherImpl.java:315)

  at com.day.j2ee.servletengine.RequestDispatcherImpl.service(RequestDispatcherImpl.java:334)

  at com.day.j2ee.servletengine.RequestDispatcherImpl.service(RequestDispatcherImpl.java:378)

  at com.day.j2ee.servletengine.ServletHandlerImpl.execute(ServletHandlerImpl.java:346)

  to com.day.j2ee.servletengine.HttpListener$ Worker.run (HttpListener.java:610)

  at java.lang.Thread.run (unknown Source)

  Notice that I use a proxy to access the internet, and I have already configured using the experience server configuration console, in the "day Commons HTTP Client 3.1" as suggested in the literature of the day here http://dev.day.com/content/docs/en/cq/current/administering/package_manager.html#Package%2 0Share % 20Account

  How can I check the Server Package share are provided by Adobe is actually alive? Are there any other requirements for the package share work? Find the SDKS required to create applications of ADEP experience in Flash Builder Services elsewhere?

  Thank you

  Cosma Colanicchia

  Aspects, it was probably due to a temporary Package sharing unavailability, as we had some problems a few weeks ago with our server.

  Access to the Package of the ADEP share, there are 2 possible login screens:

  (a) login screen the package share

  

  It comes from the Package share server and means that the server is up, running and accessible (possibly behind well-configured proxy).

  (b) login screen the product

  

  This screen will be displayed after a connection to the Server Package share has expired (not available) or denied (bad proxy server configuration).

• Impossible to install the SoundMAX for Tecra M2 drivers after install own WXP

  Hey,.

  I need help, is the audio driver for tecra m2 laptop

  + soundMAX integrated digital audio + * Version: * + 5.12.1.5160 +

  I recently wiped the computer with a clean installation of windows XP. All drivers seem to work fine after installation, except sound related. When I try to install the SoundMAX driver correct (I know it's okay, I have another computer laptop tecra m2 is exactly the same) the following error message is displayed right at the end of the installation.

  + "The driver does not exist! Restart your system and run this installer again. » +

  When I reboot, the same thing. I installed the drivers from the chipset intel, rebooted and tried: same result.
  When I go into Device Manager, all devices are taken into account except an unknown device, which is a yellow questionmark with a small exclamation mark on it. The device soundmax isn't here.
  I also tried to reinstall windows and then the drivers with the sound result last, even.

  I would appreciate if someone can help me solve this problem. If you need data from the system and you know a program to obtain the data in the system, send me a link and I'll post the data.

  See you soon,.
  Rob

  Hello

  Try please install all things following this order of installations:

  Windows XP Pro SP1a Edition
  Intel Q332179 mobile CPU driver
  AggressiveC3
  Intel Chipset Software Installation Utility
  Toshiba Common modules
  Display driver for nVIDIA GeForce FX go 5200 display driver
  SoundMAX Integrated Digital Audio
  Alps Pointing Device Driver
  Toshiba dual pointing device utility
  Driver modem
  Intel Pro/100 VE Network Connection
  Intel Pro/1000 MT Mobile connection
  Wireless Lan driver
  Wireless keyboard shortcut
  Infrared driver
  Windows SD host controller driver
  SD memory boot utility
  SD memory card format
  Bluetooth stack
  Fix for "Microsoft Bluetooth with Bluetooth" Q323183
  TOSHIBA Hotkey for display devices
  Toshiba display device change utility
  Zoom utility
  TOSHIBA Power Saver
  Toshiba Mobile ext.
  Toshiba Utilities
  Toshiba console
  Toshiba controls
  TOSHIBA ConfigFree
  Toshiba Audio effect
  CD/DVD Drive Acoustic Silencer
  DVD - RAM Driver Software can only be used with DVD-RAM support

• BlackBerry Smartphones very low performance after impossible to install the game (8310) necessary to reset the phone?

  Hello! Today, I tried to install a game using the Desktop Manager. I can see the icon in the menu, but does not (module not found) and the Desktop Manager does not see the game installed (or in options-advanced-applications)

  The problem is that now the phone has very low performance and I can barely use it, it's too slow.

  I think that the phone must be reset to the settings to factory or something.

  Can someone help me to do this?

  Thank you!

  Hello

  What I was doing to completely wipe my BB. I wrote this before and it printed.

  If your device does not work, perform a backup now if you have not already done save the file to a place and a name that you can easily locate it on computer.

  I then uninstalled DTM and then deleted all the other references to BB/Rim in Windows Explorer, thus eliminating the operating system for the BB to the computer in order to ensure that the version I want to reinstall a new version uploaded.

  Get the latest Desk Top software DTS)
  http://us.BlackBerry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&CP=OTC-DSKTPSW

  and install it on the computer.

  Get the latest version of the operating system

  http://us.BlackBerry.com/support/downloads/download_sites.jsp

  and save it on computer.

  To erase all data on your BlackBerry device, follow these steps.

  (1) download JL_Cmder http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html

  (2) install JL_Cmder to the computer.

  (3) double check you have already saved the BB. If you DO NOT, you will lose all data.

  (4) make sure that DTS is closed and plug in the BB to the computer via USB

  (5) to reach the JL_Cmder on your computer and double-click it to start. Now, it may take a few tries to connect, so persevering until he does.

  (6) on the first screen, press a key to continue.

  (7) now, if your device uses a password, enter it now. If not, press "N".

  8) press 4 to start CLEANING

  (9) press on 'Y' to continue

  (10) now type "blackberry" to continue

  (11) on the BB, you see a white screen with an error "507". Don't worry, that's what you want! You are now ready to install the operating system.

  Launch the new Desk Top software on the computer

  (1) on the homescreen of the BlackBerry® Desktop Software, click Device > update my device.

  (2) click on view the other Versions. Click the version of the new OS you previously downloaded.

  (3) click on install. The DTM will install the OS and then provide you with a list of applications to install. If you have had problems with an application, do not install it.

  Do not disconnect the device until the whole process is finished and restarted the device.

  After 10 minutes, restart again by removing the battery slot while tension and leave for a few minutes.

  Leave it again for 10 minutes. You should now have a fully functional BB!

• I can type over the at (@) symbol after having installed C6 PS ID AI BR and Lightroom.

  I installed the Italian C6, but after losing the keybord alt + @ combination.

  Hi Cucuruku,

  Just a guess, but I looked at it and wondered if it could be linked

  http://www.itlisting.org/5-Windows/d93b90bef334ba68.aspx

  You could check in the system tray and try to disable some applications running it and see if it makes a difference.

  -Dave