Unable to connect the mouse or the keyboard on Satellite L30-134

Similar Questions

• Performance of the fans on Satellite L30-134

  Hello

  I have a question about the performance of the cpu on my L30-134 fans (celeron M 410 @1. 46 ghz). Some users posted similar questions on different laptops series L, but I'd love to hear some comments L30 - 134 user/advice.

  The problem is that by default, the fan does not work on the down low all the time, but it is off and goes on every 2-3 minutes hit RPM high and causing a lot of noise. Sometimes however it works down low most of the time, being really quiet and keep the temperature at 48 to 55 degrees, while during for turning on and off the temperature is 58-65.

  There are two options for cooling in Toshiba Power Saver (which came preinstalled) we're max performance, the other is to optimize the battery. The fan seems to work on the Tower on / disable system regardless of the option selected.
  
  Q1 Do these two options are actually on the fan is constantly working on low speed or activation and deactivation?
  Q2 How can I do the fan runs all the time at low revs?
  Q3 is there third-party security programs to control the fan speed?
  
  PS: I don't have all of the options on the fan speed in the BIOS

  I'd appreciate your comments. It is not fun to have a noisy fan :)

  Hello

  As you have already mentioned the Toshiba Power saver is preinstalled on your device.
  My phone supports also this utility and energy saver controls the speed of the CPU and cooling mode.
  M unit fan starts to turn if the temperature rises to a higher level, but it depends on the use of the laptop. I don t play much games performance, but I use my camera for graphic design. Sometimes, the fans run really fast and long, but sometimes the laptop is quite.
  My support of intelligence tools speed level 4 CPU processing power and cooling method is the value max performance.
  I think the cooling also depends on the environment

  Moreover, I also read a lot of reviews on the cooling fan rotation and. Sometimes, the update of the BIOS changed the performance of fans

  A small comment to Q3: Don t think that any 3rd party application will control the performance of the fans properly. If the energy saver is not installed on the device, the power of Microsoft options are responsible for execution.

• How to change the settings of the BIOS on Satellite L30-134?

  I have a toshiba l30-134 and I can not for love nor money to update or to unlock my BIOS. Yes before you repeat the usual speal on laptops is limited. I know they are!
  BUT... the BIOS on my laptop is, at the end of the day an interchangeable accordingly with appropriate tools and integrated program.

  It is well known that large computer makers lock end-users to access these options to stop their valuation there own bought and paid for PC, so that they can not go out and buy a cheaper machine, and improve it. It is also a common misconception that laptops are not expandable. That's what they want you to hear. It is not true. OK, so you can't plug loads of PCI cards or graphics in it, which would defeat the object anyway.

  Extensible components in a laptop ARE IN FACT evolving for example, memory and HARD drive.
  There are several options that I would see in my BIOS, I know they are there, and I know that they have been hidden.

  Why, oh why can't get rights to access these options? After all, he has bought and paid for, and if I want to tinker with it why I shouldn't. She belongs to me now.

  I have a few tools that will change these settings in the BIOS, Phoenix BIOS editor and WinPhlash, but again, I have not found a downloadable BIOS for my machine. But believe me when I do I will be changing the options in the BIOS. And I hope I'll be able to put together one guide for others who also believe that they can change it machines anyway they see fit.

  Watch this space!

  You can have a BIOS custom-made on your laptop, but not through an official site like Toshiba.
  I do not understand what options you believe was hidden from the normal user like you and me.
  In addition, I doubt that you can improve the performance of your laptop by changing the Firmware into something else.

  Once a stable Firmware is made to a system, it is preserved and everyone (manufacturer and user) are happy
  with the result.

  Concerning

  chain

• When I turn on my iMac, you'll see a screen with Bluetooth keyboard configuration. But I have my keyboard is plugged in and it wont let me doin more, except saying unable to connect the keyboard player

  Bluetooth keyboard put in place the display and connected mines and allow me to do anything apart from closing down

  SystemPreferences-> Bluetooth: Remove the paired keyboard, if necessary, turn off Bluetooth.

• How to connect the keyboard for apple tv wireless?

  How to connect the keyboard for apple tv wireless?

  If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

  If you mean the 3rd generation Apple Tv:

  Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported

• I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  alias-research-http://www.Amazon.com/s?ie=UTF8&x=0&ref_=nb_sb_ss_i_8_11&y=0&field-keywords=IPhO does % 20headphone % 20adapter & url = % 3Daps & sprefix = 20head % iphone

• Connect the keyboard Apple for Windows 10 Bootcamp with password

  To connect the keyboard Apple Windows 10 Bootcamp with password, you must type a password or code. The keyboard does not work when you type. Have reinstalled and all update with bootcamp utilities. What should I do to fix this?

  If the keyboard is attached on the side OSX, you can turn off pairing it or a wired keyboard to enter the code to complete pairing, if they are available.

• Unable to connect the world of Minecraft

  My friend and I we cannot join the worlds in minecraft even we are friends on xbox live. What is the problem? Can you please fix this?

  Hi James,

  According to the description of the problem, you are unable to connect the world in Minecraft on MSN.com. I suggest you to return the article mentioned below and see if it helps you to solve the problem.

  Minecraft: Windows 10 Edition Beta FAQ

  If the problem persists, I suggest to contact the game MSN support and hope that you will get a quick response from their support.

  Support MSN Games

  Welcome to MSN Games Support

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Unable to connect the XBox 360 to my PC showing 'Impossible to locate.

  Original title: homegroup

  UNABLE TO CONNECT THE XBOX 360 TO MY PC... ERROR CODE ST

  CANNOT LOCATE ATES

  Hi laurent,.

  Thanks for posting your question in the Microsoft Community.

  I suggest you to contact Xbox support to obtain assistance from the link below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  I hope that the information above helps you.

• Help to change the keyboard on Satellite P100-202

  Who can help me to replace my keyboard?
  The flat cable connector has a black band on the white connector to print.
  This black band is broken.
  How can I connect the keyboard?

  Who can help me and possibly a keyboard (used) and a good connection?

  Buy new (used) keyboard with connector appropriate.
  You can find it on eBay and it is cheap.

  It is always risky to use a few improvisations for these issues. In my opinion, you need to use no broken parts to be sure, everything will be OK and you use the keyboard without some connectivity issues in the future.

• For the Archives: The upgrade of the Satellite L30-134

  I'm one of those old cell phones off a friend who had retired as being obsolete.

  However with a little time and money, it is possible to upgrade to a very usable machine.

  Not a power by any stretch but perfectly adequate for browsing the internet and watching videos (about 720 p watchable) standard definition etc.

  So as the search of these forums for more information for this project, I found a lot of conflicting advice, and some of my questions were not answered at all. I hope by documenting my experiences here I can help someone in the same position in the future.

  * Model *.

  This machine is the Toshiba Satellite L30-134, part number: PSL33E-00E013G3. It's probably very similar, but not necessarily the same as the other models L30. No invert them.

  * Original configuration *.

  Processor - Intel Celeron m 410 (Cache of 1 MB, 1.46 GHz, 533 MHz FSB, Socket M). It is a simple version of the Core Duo (Yonah core) processor core. It shares nothing in common and is not swapable with the previous generation Pentium M or processors Celeron Mr. He is also incompatible with the next generation of Core 2 Duo/Solo and Pentium and Celeron processors derived from these.

  Memory - A single 512MB SODIMM PC2 - 4200 (DDR2-533 MHz). This differs from the previous generation of DDR and the next generation of DDR3. The controller memory only supports single channel mode. There is no loss that the FSB of the processor is not fast enough to take advantage of the dual channel anyway.

  * BIOS *.

  My laptop came with very old version 1.3. Toshiba provides the latest version (3.10) for download. This is reported to be buggy and mess with the profiles of fan so I decided to leave it alone. I can confirm that my updates work without updating the BIOS.

  * Updates *.

  Processor - I swapped the Celeron for a Core Duo T2350 (1.87 GHz). Everything I read that all the Yonah core Core Duo/solo, Pentium and Celeron with a FSB of 533 are compatible. The FSB 667 models are not.

  The Core Duo T2450 at 2 GHz is the highest performing compatible processor but double the price on eBay. I paid just £12 (used) for the T2350 so there is really no reason to go down now, all of these parts are obsolete.

  RAM - there are 2 slots on this machine. Toshiba State a maximum of 2 GB, 1 GB in each slot. Unfortunately, the memory controller is very picky and survey of the weird errors, unless you get just the right ones.

  There is not enough information to understand it so for me it was a process of trial and error. Fortunately, I found an online retailer that guaranteed compatibility in 100% and returned by mail for free.

  The second pair of Poles worked well.

  Thanks for sharing!

• Satellite L30-134 PSL33 - Question about the version of the BIOS and the type of DVD writer

  Hello!

  I bought a Toshiba L30-134 PSL33 the week last in Hungary. I recorded to Toshiba international warranty, so I saw that my cell was made the 19.10.2006.
  My friend bought the same laptop (Toshiba L30-134 PSL33) too (also in Hungary), two weeks ago. His machine was made on 19.12.2006.
  It's already funny, but that's not all.
  My laptop has a series number starts with X, and the machine of my friends has this starting with Z. That's ok.
  But here it is...
  I have a BIOS version of 1.3 and my friend has a BIOS version of 1.9! 0.6 gap within two months? Why?
  The other thing. I have a DVD burner called Mat * a UJ - 841 S and my friend has a LG 4082. Once again: why?
  If you are looking for Toshiba BIOS update you don't find anything! It is very interesting. There must be some updates to the BIOS, because I read here to another topis that someone has a BIOS version of 1.4. But there are 1.9 too.
  Each book was brand new when we bought.
  Any idea?
  Let me know when you bought your laptop, what BIOS version it has, and what kind of DVD player there.
  I'm wainting for the answers, because I'm really interested!

  Thank you
  Marcell

  Hey Arnaud!

  I m from Hungary, too, but I think I should speak English on this forum :) So here is my notebook, I ve bought on 24.12.06. :

  Type: L30 - 134 PSL33E
  The machine was made on: 19.12.06
  Series: starts with Z
  DVD player: LG
  BIOS version: 1.9

  You should t be nervous on the drive, the carpet * a Panasonic, and I think that s as good as LG. Why are they different? I put t know, maybe Toshiba was such at the time. In the specifications I didn't seen anything on the drive type, so I think that s not relevant. I t has not found another version of BIOS for this model, so I t understand too why and what are the differences between the versions. But if you n t have a problem with your machine, you do not need to change the BIOS. This isn't a PC, if you haven t many options to change in the BIOS.
  If you want to discuss on the laptop on the Hungarian language, I recommend the Toshiba section on www.prohardver.hu.

  Best regards
  Abel

• Toll-free indicated what power disconnected from the Satellite L30-134

  I don't know it this the appropriate category, because I'm not sure of the source of the problem.

  Okay, here it is:
  I have Toshiba Satellite L30-134.

  Normally, when I unplug the cable of the AC adapter, 2 things happen:
  1 ATP icon shows that the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.

  2. the power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely down.

  Well... Last few days things have changed:

  Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  I'm not sure that this has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.
  Need help, please :-)
  OS: Windows XP, automatic updates, I did not notice if this happen after installation or any other measure of speciffic, I did...

  > Normally, when I unplug the cable of the AC adapter, 2 things happen:
  > 1. ATP icon shows the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.
  > 2. Power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely.

  This process is correct. After disconnecting the AC adapter the laptop switches to the battery power and uses the Toshiba power saver mode the power created for the use of the battery.

  > Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  > I don't know he has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.

  Well the ups (uninterruptible power supply) service could be responsible for this problem!
  If you are not able to start it manually, then it might be a problem with OS software.
  I studied a bit and found this article in the Microsoft Knowledge base about this problem.

  + Cannot start the UPS Service.
  http://support.Microsoft.com/kb/310437

  Good bye

• Satellite L30-134: is it possible to determine the frequency of 533 MHz RAM?

  Hello!

  I have Satellite L30-134 and used a module of 1 GB / 667 MHz (sic!) for a while. Same Toshiba says maximum speed 533 MHz memory he recognizes module PC-5300 and sets exactly to 667 MHz.

  I decided to increase the RAM and bought another PC-5300 1 GB stick.
  ... RAM is only 1 GB with two modules together. The two sticks are OK - L30 sees 1 GB and works well with each of them separately.

  I know that the reason is that Toshiba couldn't work with greater speed on the two banks (or something like that).

  So. It seems to be a good idea to set the frequency of 533 MHz and it should work.
  The only question is to know how to do it? BIOS Setup is almost empty and does not have these settings.

  One advise, please (except to buy sticks more :)

  Hello

  Laptop Satellite L30-134 is a processor 1.5 GHz of Intel-Celeron-M (Yonah).
  Is this good?

  This processor supports a 533 Mhz bus and if you use modules of 533 Mhz RAM then will automatically solve this value!
  Simply put, you do not need to change anything manually! Everything is controlled automatically.

  Concerning