Impossible to install Win7 on my Qosmio F50

Similar Questions

• Impossible to install win7 on a Tecra A8 with ssd

  Hi all

  I am trying to install win7 on my Tecra A8 PTA83E and I have the following problem
  -If the drive is a normal hard drive, then installation is complete OK
  -If I change the disc with an ocz vertex turbo SSD, then the installation will stop, at the time when
  Win7 try to unpack the installation files in the disc with an error message "file not found" or similar. "

  I've been reading about SSD in the web and the prime suspect is the IDE - SATA in Bios mode, they
  all you suggest changing the IDE - SATA mode to AHCI mode. I look in the Bios in Toshiba Utilities
  and not found anything.

  Anyone know how to change the mode in the Bios, if course is supported?
  Also, someone installed win7 SSD in other models and have any suggestions?

  I'd appreciate any suggestions.

  Hello

  As I know the BIOS Tecra does not support this option.
  But it s not no need to change something in the BIOS because the Windows 7 contains the necessary SATA drivers.

  However, I think you should check the SSD manufacturer support page that maybe a firmware must be updated

  I also recommend the formatting of this SSD again maybe it helps

• Impossible to install Win7 on ENVY 15 t-j000

  I recently bought a HP ENVY 15 t QUAD - E4T17AV

  It comes with Win8 and I honestly can't stand it. Trying to reinstall with Win7, I am unable to find discs to install to. I searched the devmgr win8 to get information about the SATA controller and chipset. I downloaded the drivers and when you attempt to add during the Win7 it found the drivers that are compatible with my system, but when I try to install I get the error ' no new devices not could be found.

  I enabled legacy startup options, disabled secure boot, changed the boot order, all that good stuff.

  I tried to install SATA drives both mSATA connected, that only have one or the other and receive the same error each time. I used several different drivers of HP and Intel, and all receive the same error.

  I read the other messages from people who say that they install Win7 on their 15 t, it must be possible.

  What Miss me?

  Thank you.

  Had the same problem... figured it out... it was not a Sata Contorller driver problem at all.

  1. turn off Secure Boot, active herit.

  2. turn the USB 3.0 BIOS to act as AUTO setting so that the operating system facilities to qualify ports USB 2.0 compatible

  3 HD partition scheme had to be reset... don't know what it was.  Hooked to my Mac and under parition, set it to 1 Partition and chose the MBR as the partition table layout scheme.

  Hope this helps, but still the problem with the graphics drivers from Nvidia and Intel Chipset drivers

• HP dv7-6b50eb: HP recovery launches the cloned SSD, impossible to install win7 on the SSD.

  Hello

  I recently bought an SSD to accelerate my HP DV7. So I tried to clone my previous 1 TB to my 250 GB SSD hdd, but it seems that it's quite simple. :-(.

  I have created the exact same partitions (with the same size, orders, except for my main Windows partition type of course being given my SSD is much smaller) on the SSD as on my old Hdd. After that I made an exact copy of each 3 partitions (HP Recovery partition, system and tools Hp) but instead of copying the windows partition, I left a void on the SSD as the size of the Windows on the old hard drive partition is larger (the data) than the available size on the remaining on the SSD partition. I thought that I could boot on the SSD drive and start the restore process to install Win7 on the empty partition. But when I restart the pc, it does not seem to recognize the boot SSD partition, he prefers not to say "No operating system found".

  I also tried to activate the 3 partition directly (which is the recovery partition) to directly on boot as the partition, but it did not work either. The partition to activate before it was the 1st partition (which is the SYSTEM partition), but he has not worked either.

  Can someone help me do that cloning to work?

  FYI, I did the cloning and the creation of the partition using fdisk and dd on ubuntu.

  Thank you.

  Hi Wawood and Mista B,.

  Thanks for your comments I have a previous message, but strangely I have not found trace of the previous message, maybe I forgot to press the 'POST' button:-s.

  In any case, I was thinking that I understand your remarks Wawood but my goal isn't specifically for the windows on my new SSD partition (not interested in reducing the windows partition, it is just a statement), it was ok for me to any re - install from the recovery partition, a windows 7 from scratch.

  And I'd say Mista B by saying that it would have been stupid HP do not allow someone to use the recovery on the same pc partition, just because it has a different hard drive.

  Finally, I managed to do what I wanted to for those who are interested (HP is not so stupid after all:-p), here's the method I used to clone my hard drive of 1 TB to my 250 GB SSD and keep all the native HP (recovery, hp_tools, System) partitions with a 1 TB hard drive works correctly.

  So what I have is:

  -J' put the SSD as a second drive on my laptop (I guess it should work in the same way if connected by USB)

  -J' I started my pc and downloaded the EaseUs partition master

  -J' ran the program and began by doing a thorough cleaning of the SSD

  -J' made a copy of the system partition of my hard drive of 1 TB to my SSD

  -J' made a copy of the partition my hard drive of 1 TB HP_TOOLS to my SSD

  -J' made a copy of the recovery of my 1 TB hard drive partition to my SSD

  -J' created a new empty NTFS partition in the remaining partition

  I'm done with the same exact score as agenda in my 1 TB HDD.

  1. THE SYSTEM

  2 NTFS empty

  3 recovery

  4.HP_TOOLS

  After that my SSD was not bootable, because the MBR has not yet been copied.

  Then I started a live CD of Ubuntu and I installed boot-repair and he ran.

  I chose the advanced options and set set the mbr and boot from the partition 3.

  I then put the partition recovery (partition 3) as being ACTIVE.

  I removed the hard drive of 1 TB of the laptop (to avoid any error during execution of recovery which ends with the recovered 1To:-p) beeing and replaced it with the SSD.

  I then rebooted the laptop and it starts directly on the recovery partition. I finished in the recovery strategy (I could not choose the recovery from an earlier point in time given that the windows partition is empty (no windows backup)).

  I chose over the full restore, the slight recovery with only OS and drivers and it does the job of recovery. Now that the of what I write this resolved thread :-).

  Hope this helps some people out there with the same questions.

• Impossible to install Win7 on Qosmio F30-112

  There is a problem with ICH7 driver trying a CD installation and obsolete BIOS problem when you try to upgrade existing instalation of Win.
  Where to get propper ICH7 driver or where to find the upgrade of BIOS? F30 - 112 is no longer on the Toshiba support list.

  The latest version of the bios of your laptop either 3, 90 - WIN, can be downloaded from http://support1.toshiba-tro.de/tedd-files2/0/bios-20080505133719.zip here. Check your current version!

• Impossible to install Win7 on my L855-12V Satellite Network controller

  I have a laptop Toshiba Satellite L855-12V, and I installed win 7 on it. I tried to install network controller, but it does not work. I'm trying to troobleshoot and it is said: + the driver for network controller is not installed. Install the latest driver for this device. +

  What should I do? Am I missing something? Thank you very much!

  Hello

  As a first step, I would like to send you the complete list installation Win7 64 bit OS installation:

  Windows 7 SP1 of Win7 64 bit
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel driver
  and/or
  AMD display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  Synaptics Touch Pad Driver
  Atheros LAN Driver
  HD 1.12.0300 SRS Premium Sound Technology
  Realtek card reader
  Wireless LAN driver
  Filter of Bluetooth driver package
  Bluetooth Stack for Windows by Toshiba
  Bluetooth monitor
  Intel USB3.0 driver
  TOSHIBA Value Added Package
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles TosVolRegulator_1.1 [1.0.0.6]

  Laptop is fully compatible to Win7 64 bit so installing drivers, tools and utilities should not be problematic.

  The pilot who is the troublemaker? What version you are trying to install?

• Impossible to install win7 on my new laptop computer

  Hello

  I bought (hp pavilion 2321sx g6) with windows 8 64-bit pre-installed.

  But iam not uncomfortable using windows8, so I tried to install windows 7 64 bit on the laptop.

  Once starting the DVD of win7, I see windows animated loading image, then the laptop is dragging.

  Is there a way to solve this problem and continue installing windows 7?

  Where can I find windows 7 drivers for my laptop?

  IAM a lover, TH HP

  I changed a few settings in the BIOS and it worked.

• Impossible to install OS on my Qosmio G20-110

  My hard drive does not so I bought a hard drive from 320 GB to replace the failure, but I can t seem to get the operating system to install.

  I tried the other 60 GB as the principal also tried the 320 GB but the OS still doesn't load. I even got it to a computer shop, but they can t get it working anymore. If anyone could help me or has a system restore disc, they can copy, I would be grateful.

  I tried to download driver Toshibas but they say my laptops not supported due to his age. I put t know what else to do so I hope someone can help me.

  Thank you

  Can you please send more details?
  You want to install the OS by using image original recovery or the Microsoft installation disc?
  The operating system you want to install?

  What happens exactly when you want to install OS?
  Is that what you have loaded driver RAID before installation of the OS starts (support of diskette drive)?

• Impossible to install Win7 PRO 64 on clean Machine

  Well, I have this problem, but in a rather unique situation.

  Have a HP 8200 workstation I know works - I have formatted a SATA HDD & installed - set the BIOS to make the reader of CD/DVD boot priority. The Machine recognizes the presence of the hard drive & I can do display a message "Press any key to boot from the CD/DVD" - it is said he had try to bbot from the CD & then it just displays the message "BOOTMGR is missing, press Ctrl Alt Del to restart", and this with a new PRO 7 64 drive is in the drive.   The CD blinking like crazy, but it's like he's going.

  Also tried to get the installation to start with a XP installation CD older - same thing.  Is there any chance the "Bootmgr" there need is a function of the BIOS?

  I try to do a clean install of the operating system, but cannot get the Windows installation to start - Help!

  Its likely the installation media is damaged or scratched. I would try to get a new copy and try again.

• Impossible to disable touchpad after installing Win7 on Qosmio x 300

  Hello

  I have a laptop Qosmio X 300, which came with Vista. When I was with Vista, I turned off the tap-click for the touchpad because of its sensitivity.
  Now, I installed Win7 and I can't find the options as before. Does the laptop have a synaptics pointing device and I installed all the drivers from the Web from Toshiba website.
  I looked in the control panel and tried to change the settings of the software synaptics touchpad, but I had no luck.

  Do you have any suggestions? Should I'm looking for a driver for win7 for my touchpad?

  Thank you
  Ruxandra

  You can disable the touchpad in the mouse properties too.
  Simply click on the disablebutton.

• Not possible to install the printer on the Qosmio F50

  I have a Qosmio F50 - 10 M, running on Vista 32 bit SP2.
  I tried several times to install a new color printer HP Laserjet MFP276nw 200 without success. The error text is not specific...
  The installation software, I should contact my provider of system support.
  Well, I'm here...

  Does anyone have any ideas how to install this printer on my system?

  Kind regards
  Kai

  To be honest with this problem. If your laptop works well, and the OS is stable why laptop of the manufacturer must be responsible if there is a problem with the installation of the software of third party?

  In my opinion, you should contact the printer manufacturer software and ask why you cannot install their software on many working Windows System. I use HP 120 Envy with my machine and I had no problem at all (win7 64 bit).

• Qosmio F50 - need to update the BIOS in the order of installation Win7 64-bit

  Dear community,

  I plan to upgrade to Windows 7 64 bit. My laptop is Toshiba Qosmio F50 - 10 M with a VISTA32bit preinstalled.

  Is it necessary to update the prior consent of BIOS install the new OS? I read that there is a BIOS update Fa? ¼r VISTA64bit available, but none that I discovered for Win7 64 bit.

  Can give you a hint?

  I am confident and happy to own a laptop as powerful but this not filled OS named VISTA makes me nuts more in addition to reading all these great reports about the benefits of Windows7!

  Looking forward to read your welcome responses

  Yours,
  Starmind

  Hello

  Is there a BIOS for Vista 32 bit and 64 bit.
  There is no special Win 7 BIOS.

  If you want to install Win 7 64 bit, I advise to use the BIOS for Vista 64-bit. If you want to install Win 7 32 bit-> choose vista 32-bit BIOS.

  Generally, it should be possible to upgrade the BIOS under Win 7 so, but because that it s a BIOS for the Vista operating system, I recommend upgrading the BIOS in Vista.

• Qosmio F50-12 b Win7 64 bit driver problems affects Fn, Power Saver, Tablet

  Hello

  I have Toshiba Qosmio F50 - 12 b. initially, I have Vista Ultimate 32 bit, then I refresh installation of Windows 7 Ultimate 64-bit...
  This is the problem,

  I installed all the drivers for my operating system and the computer, but I can not installed or activated FN key, TouchPad, PowerSaver of Toshiba and the keys palpable above the keys of Func/digital as Dolbly, Media Center, Forward, Backward, Mute-, lights-touchpad on - off utility.

  ? also tried vista 64 drivers for these things, but nothing works to them.
  I tried auto updater Toshiba win 7driver tool (tsi4win7.exe), but nothing changes.
  I need help on this situation... Is anyone know how active these utilities, in particular the FN keys and touchpad!

  Thank you...

  I hope that the Toshiba support my voice up and help this time :)

  Hi mate

  The 64-bit value Wi7 package and Support of Flash memory card utility must be installed.
  Flash Card Support utility controls the FN keys and you should install it, after installation of VAP.

  Also the media control buttons should work after the installation of the package value.

• Re: Qosmio F50 - 10M - how to install the 64-bit version of BIOS?

  Hello guys,.

  I've updated my Qosmio F50 for Windows7 Professional 64-bit by installing the scratch (deleting these VISA32bit; from formatting the partition/hard drive).

  I installed the BIOS version 2.20 update 64 bit installation process stopped saying something like: "you already have the latest version of the bios. Of course, I made the misstake install the bios with the same number of version 2.20 while I used vista, but this version was the 32 bit one.

  How can I convince the computer to accept the 64 bit version of the BIOS installed (because it seems not to recognize that it is different) and what are the special benefits from 64 to 32-bit version of the BIOS?

  Thank you for your kind replies.

  Yours,
  Starmind_1

  Hey,.

  Are you sure that you have installed the WIN32 of BIOS version if this error message appears?

  Last year I also changed the BIOS to a WIN32 for WIN64 version and it was no problem. Update worked correctly, but I did this update on the preinstalled Vista version of Toshiba.

  It works when you try the update of Vista?

• Qosmio F50: How can I install Vista Business

  Hello!

  I recently bought qosmio f50 and it came with the home edition of vista...

  I need to install Vista professional.
  How can I do?
  I have to format it?
  So how do I install back all the utilities and drivers which it came with?
  I have problems with my laptop if I do this?

  Post edited by: xaralas

  Hello

  The Vista installation is not difficult.
  He just put the Vista disk in the STRANGE and then start from the disc.
  The installation will start automatically.

  But this will format your HARD drive and you will lose your installed Win XP and other files.

  > How can I install back all the utilities and drivers which it came with?
  I guess you have a Toshiba Recovery disk.
  If you want to retrieve the OS installed by Toshiba, then you need to use the Toshiba Recovery for recovery disk.

  PS: what Qosmio F do you have exactly? I ask because 108 F is not known to me