Impossible to listen to the music - problem with sound card

Similar Questions

• Problem with sound card

  The error message at the opening of the music played is coming as

  Windows Media Player cannot play the file because there is a problem with the audio device. There may be a sound device installed on your computer, it can be used by a program or it is not working properly.

  Please help again...

  Thank you

  MS UAA OR MS UAA for XP SP3, here

• Satellite L755-16J - problem with sound card

  I currently own a Toshiba * Satellite L755-16J * and is having some kind of trouble with the sound card, I think.

  When I bought it, it came with windows 7, I changed the Windows of windows 8 and since then the audio has been trouble me.

  The internal speakers work for a minute or two, when I play an audio file, but then stop working.
  I had been using a usb external sound card and external speakers for some time but decided to the switchback to windows 7 for the sound working again. even if I went to win 7, the sound still doesn't work.

  I am sure that the problem is not in the internal speakers because they do not work, even if it's just for a brief moment, but they work, so I think the problem is in the software instead of hardware.

  I tried to update the audio drivers but they seem to be updated as windows, pilots 'seem to work properly.

  Can anyone help?

  > even if I spent back for win 7, the sound still doesn't work.

  How did you do that?
  Have you used the Toshiba Recovery disk in order to install Win 7 or have you installed Windows 7 using the Windows 7 clean and fresh hot?

  The laptop supports the Conexant audio chip. The audio driver is available on the page of the Toshiba UE driver and where the sound chip is already recognized in Device Manager after installing the audio driver, I assume that the driver has been installed correctly.

  In this case I recommend you plug in a headset.
  In case the headset should work fine, the speakers could be affected. I mean the material. But of course it s just an idea.

  Next to the audit of the helmet, you can also check the settings in the Panel of-> sound-> the Read tab.
  Usually, the speakers should be set as default device.
  Check this option too.

• Impossible to listen to the music or sounds using internal and external speakers

  Original: connect external speakers

  I have an Acer Aspire Z5700 all-in-one computer.  I have two external speakers with an audio jack and a USB port that I can connect to the computer and I when it is connected to the computer, I hear out of them my question is how to get the sound of the computer system internal and external speakers at the same time?

  Hi Joseph,.

  I would keep informs you that it is not possible to play sounds or music using internal and external speakers at the same time.
  You can play music using any one option at a time, either the internal speakers or external speakers.

• Impossible to listen to the music already purchased on Media Player.

  original title: Windows Media Player 11 & files music wma.

  I bought music online in a few years ago wma format and cannot play in the WMP11.  The supplier said they switched to mp3 format, and WMP 11 does not offer the license management tool. They recommended I download WMP 9, burn the songs to an audio CD in audio CD format, and extract them using WMP.  I tried to download WMP 9 to see if it works, but my computer says that the program is blocked due to problems of compatibiltiy.  Is there something I can do?

  I bought music online in a few years ago wma format and cannot play in the WMP11.  The supplier said they switched to mp3 format, and WMP 11 does not offer the license management tool. They recommended I download WMP 9, burn the songs to an audio CD in audio CD format, and extract them using WMP.  I tried to download WMP 9 to see if it works, but my computer says that the program is blocked due to problems of compatibiltiy.  Is there something I can do?

  ====================================
  Maybe... just maybe... the following freeware pourrait
  convert WMA to WMA files. Redundant sounds
  I know, but the new version of the WMA files could
  play for you.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your WMA files on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your RMA is saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your WMA files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• Problem with sound card - no available Information of Jack.

  Yesterday, I suddenly lost sound on my pC.  I use headphones so as not to disturb my wife.  I went to DELL support and download the latest version of the driver and install it on my PC.  Everything looks ok, but whenever I try to set it up, I get a message that "no jack information is available.  I tried front and rear taken and still have no sound.  Clues on where I go from here?

  You must reinstall DOT NET 2.0 and 3.5

  then install Directx June 2010 patch.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=8109

  You download the file and extract it in a folder and then run DXSETUP. EXE as administrator.

  Then install the driver Vista because it did not come with windows 7 and have therefore no WIN7 drivers.

  Description	Supported OS	Download
  SIGMATEL STAC 92XX C - Major HD Audio, v.6.10.0.5343, A02 STAC92XX of SigmaTel C-Major HD Audio Drivermore details	Windows Vista 32-bit Windows Vista 64-bit

  This means that you need to install the live show as well as DX9 legacy

  and DX10 drivers from the June 2010 PATCH.

  You download the file. extract to a folder and run the file dxsetup.exe as administrator.

  You also need to re activate DOTNET and legacy Direct play.
  

   

  

• I can't use my headset while I listen to the music with the home theater.

  original title: I can't use my headset while I am listening to the music with the cinema.bouth House is connected to my pc... What can I do?

  I have my homecinema and my headset connected to my pc.what can do so they can work at the same time?

  Hello

  1. What do you mean my home theater?
  2. How is it connected to the PC?
  3. What is the brand and model of the PC?

  Follow the steps described in the links to update the sound card drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  It depends on your hardware. Your computer must have a card that is capable of several output stream.

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• When listening to the music of Grooveshark, the sound turns off after a minute.

  When listening to the music of Grooveshark, the sound turns off after a minute.  Must press the key or the mouse to re-activate.  I turned off the screen saver.  Cut off.  Grooveshark said that they have no control over that, but the operating system.  Can someone help me with this?

  Hello

  Try the following steps.

  Method 1:

  Sometimes a Web site you visit doesn't look like you expect it. Images may not appear, menus may be out of place, and text boxes may be blurred together. This can be caused by a compatibility problem between Internet Explorer and the site that you are. When a site is not compatible with Internet Explorer, you'll see the compatibility view button in the address bar. You can activate only display Internet Explorer compatibility for the office.

  Use compatibility mode in Internet Explorer:

  http://Windows.Microsoft.com/en-in/Internet-Explorer/use-compatibility-view#IE=IE-10

  Method 2:

  I would say to change the mode of Internet Explorer 9 browser.

  Steps to follow:

  a. open Internet Explorer, press the F12 function key.

  (b) in the part of developers, click browser mode and click on Internet Explorer 9.

  If the Web site uses flash player, try to uninstall and reinstall and check if it helps.

  It will be useful.

• When I go to Windows Media player to listen to the music, I get an error message C00D11B1 how can I fix that I can play my music?

  When I go to Windows Media player to listen to the music, I get an error message C00D11B1 how can I fix that I can play my music?

  Hi SummerSolarez,

  1. did you of recent changes on the computer?

  2. This only happens when you try to play a specific type of file with all the files or music?

  I suggest you to update your audio driver by following the steps in the link below and check if it helps.

  Windows Media Player C00D11B1

  Note: The steps are also applicable to Windows Vista Media Player.

  Hope this information is useful.

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter

• How can I find the music marked with an exclamation point in my itunes library?

  How can I find the music marked with an exclamation point in my itunes library?

  Hello there rdgernnr!

  I certainly don't want to find the songs that show the "!" and get them to play correctly. If you have not yet done it, read this article: If you see an exclamation point next to your items in iTunes - Apple Support

  More precisely:

  Correct the path of the media file

  Follow these steps to help find the correct location of the file iTunes media:

  1. In iTunes on your Mac or PC, select the song, album, movie, or television show that has the exclamation next to him.
  2. In the MenuBar at the top of your screen, computer or at the top of the iTunes window choose Edition > read the information.
     If you are using Windows and you don't see the menu bar, Learn how to turn it on.
  3. When you see a message asking if you want to locate the file, click search.
     • If you know the location of the file, point to it iTunes and try to read your content.
     • If you do not know the location of the file, search for it:
       Mac: Press ⌘ and space control your keyboard, and then type the name of the movie title, app, song, album or artist.
       Windows: Press the Windows on your keyboard, and then type the name of the movie title, app, song, album or artist. If your keyboard does not have a Windows key, press the Escape (Esc) and control (Ctrl) on your keyboard.
     • If the file is on a network drive or external, plug on the volume of disk or external network.
     • If you find your objects in the trash or recycle bin, restore them to their previous location:
       Mac: Control-click or right-click on the item and choose put back.
       Windows: Right-click on the item and choose restore.
  4. Once you retrieve the file, use Get new Info to locate the file, and then point iTunes to the correct location.

  See you soon!

• What I really join the music Apple to listen to the music I want to listen to?

  What I really join the music Apple to listen to the music I want to hear?

  # You can buy your own music without subscription (Apple's music).

• How to listen to the music of Android for U920T satellite using BT

  Anyone could listen to the music of android phone in the U920T using Bluetooth?

  What I want is to hear the music of android phone in the Tablet U920 speakers.

  I have the latest drivers for Bluetooth stack installed and I m able to share files via Bluetooth.

  I know that it is possible to use the WiFi but I want to use Bluetooth.

  Thanks for any advice.

  Activate the BT on your Android phone and make it visible.

  Then go to the peripheral area PC and printers and click Add devices
  Now the window search for the smartphone and it would add to the devices area.

  After that click on your smartphone that appear in the peripheral topic area and now you would get a new screen.
  Here you will see an area called audio Services (to use the listed audio stereo speakers PC playing on delete device) where you can click the button connect to allow an audio stream from the phone to the speakers for laptop.

  Then, you would get a notification that the connection was made successfully, and you might start and the audio stream on your smartphone

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.