Impossible to move tools after upgrade to 7.0.1 build 227600 workstation

Similar Questions

• Problem with some of the tools after upgrade.

  I upgraded my windows XP to Windows 7.  After reloading my PS software, I get a strange thing is when I open the Psalm some of my tools (eg. zoom) turn into 3 small icons when I move the cursor over an image.  The tools still work, but it's very distracting.  I don't know what caused it, but nothing I've tried will get back to normal tools.  Anyone has any ideas on this?

  Based on DPI scaling above 100 percent in windows 7 can cause the problem too.

• Cannot upgrade VMWare Tools after upgrade to 10.6 and 2.0.6b1

  After the upgrade to 10.5.8 10.6.1 and Fusion 2.0.5 at 2.0.6b1, I have an exclamation point on my VMWare tools, saying they can be upgraded. What WMWare Tools opening and clicking on update of the tools, the window closes, but nothing happens. Even after a reboot. The WM is XP Pro. Any ideas?

  Hi Doc,

  It is possible that the iso is mounted, but not by force. After you have restarted the VM, click again on install VMware Tools in the Virtual Machine menu, then open my computer and watch your optical drive. It should say VMware Tools. Double-click it to start the installation of the VMware Tools.

  Let me know if this is useful,

  Eric

• VMware Tools after upgrade to ESXi Update 3

  I recently tested the upgrade of one of our hosts of update 2 to 3 update.  After you apply the update using Update Manager virtual machines running on the host State VMware Tools ToolsOK instead of the ToolsOutOfDate show expected.  It seems that there is indeed a new version of the tools installed with the update 3, but virtual Centre is not correctly state.

  All the world has noticed this problem?

  This is a known issue. I would recommend to use for free a 3rd third party tool to check the version numbers:

  http://www.yellow-bricks.com/2008/11/12/cool-tool-update-RVTools-21/

  Duncan

  Blogs: http://www.yellow-bricks.com

  If you find this information useful, please give points to "correct" or "useful".

• Impossible to move objects after pasting inside?

  Using CS5.5,.

  I did a series of forms such as the joint, then I select the outdoor square shape and I chose to edit > paste inside the shape. Then I group all the rooms that make up the forms and I want to move it to a lower part of my document, but when I do that the image does not come with the shape and text.

  What I am doing wrong? How should I do this?

  Thank you.

  Sound of a gun! I have been concerned about this possibility, but I saw that align controls worked well. I didn't know that orders space evenly would behave differently.

  This seems to be a flaw in the application. For this reason, you would better align and distribute the elements of the layout first and then adding the images later.

  Nevertheless, here are some ways that you can deal with this issue, at this stage:

  • Distribute the elements visually, according to your eye. The arrow keys to move an object in one direction, by holding down the SHIFT key to move larger increments. In addition, now the shift will force motion if the displacement of an object using the mouse or the cursor.
  • Using mathematics. If you select multiple objects or groups on the Web, you can see the total width and height they occupy in the property inspector. You can then use your knowledge of the width/height of every item in them to distribute digitally, by hand.
  • Here is an interesting workaround: create a new layer and the "trace" each object below using the rectangle tool. (In fact, if they are all the same size, you can take only one time and then option-make slide to copy.) Select the appropriate rectangles, then apply the commands space evenly, as needed. Now move this layer to the bottom of the stack and use it as a guide to reposition the original objects above.

• Impossible to security agent after upgrade to GC11g on solaris 10

  I have updated the GC to 10.2.0.5 to 11g. Everything seems to be fine. Now I'm unable to ensure the agent running on the same machine where WHO is hosted. More when I check the status of the WHO using the $OMS_HOME/bin/emctl status who, the output is provided for in
  
  bash-3. $ 00 / u01/app/oracle/product/GRID/Oracle/Middleware/oms11g/bin/emctl status SGD
  Oracle Enterprise Manager 11g Release 1 Grid Control
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  WebTier is down
  Management Server Oracle is in place
  
  It is said webtier is down, but when I restart all he'll tell webtier started successfully. I don't know what is happeing behind the scene.
  
  Can anyone help in this regard. If all of the newspapers are required, which can be downloaded.

  bash-3. $00 cd $OMS_HOME/opmn/bin
  bash-3. $00 pwd
  / u01/app/oracle/product/Grid/Oracle/middleware/oms11g/opmn/bin
  bash-3. $ 00. / opmnctl status
  opmnctl: invalid ORACLE_INSTANCE (/u01/app/oracle/product/GRID/Oracle/Middleware/oms11g/config/OPMN/opmn/opmn.xml is missing).

• Impossible to publish a wswmm on computer or dvd into a video file with windows movie maker, after the edition of a major project

  Impossible to publish a wswmm on computer or dvd with windows movie maker, after the edition of a great project - error message stating "cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again"

  the source files are all there and I have more than enough space... Please help (project video wedding!)

  Thank you thank you thank you...

  chop my project and publish it on computer, mix files together on the creation of dvd windows... it worked!

  you saved me break my laptop into 1 million pieces... thank you once again!

• Impossible to deploy the model after upgrading to vCenter v4_1

  Hi all

  I updated vCenter Server from version 4.0 to v4.1 and re-registers the hosts.
  Virtual machines are working well and are able to collect data on performance.

  However, when I tried to deploy the model, error occurred and failed to deploy the model.

  (This model were made to vCenter v4.0 environment, before moving on to vCenter v4.1).

  My client needs deploy the model so that it can create a new server next week...

  I looked to the top of the Knowledge Base and found the following information.

  ----------------------------------------------------

  Knockout No. 1036224
  VMware KB after upgrading to vCenter Server 4_0 to 4_1, deployment of a model with a comments customization fails

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1036224 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 321118019 & StateID = 1 0 321114529

  ----------------------------------------------------

  If there is anyone who has solved this problem by following the procedures written in this KB, could you tell me at what level you updated VMware tools for?
  In addition, was the update of the virtual hardware to solve this problem?
  (I hope that the material of the VM is v7, which is the last for ESXv.4.0, update the virtual hardware is not required in my environment :)

  Thanks for you information in advance!

  
  < environment >
  Before the upgrade: vCenter Server * v4.0*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware,.
  After upgrade: vCenter Server * v4.1*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware
  (I've specifically updated only the vCenter server and ESX and VM(Windows/Linux) are not updated).

  Hello

  Try to convert the template to a virtual machine, then new - VM model.

  Sounds strange, but it works for us

• The Adobe Photoshop cs6 problem - it closes after button "move tool"

  After that I push the button move tool I can't use all the buttons below in this toolbar, when I try to any button after closing the program with windows error "adobe photoshop cs6 has stopped working"

  OS: win 7 64 bit.

  Another adobe installed: adobe dreamweaver cs6

  OK, it seems to have been restricted to the video driver or its settings.

  1. What brand and model of video card you have?
  2. What is the number and the date of the driver installed?
  3. For OpenGL, what are the parameters of your performance?

  Good luck

  Hunt

• Firefox 10 - impossible to get rid of Mozilla what's new page after upgrade (new)

  Everytime I open Firefox 10 after upgrade, that I can not get rid of what's new page, that is, I can not open with a blank page. I'm aware of the procedure for this but it does not work. results also upgraded to Firefox 10 on my laptop (Vista Home Premium) without problem - I set to open with a blank page and hey presto it's happening.

  Hello

  Please see this.

• ZTE C open brick after upgrade. Fastboot showing errors: "E:misssing bitmap installing_text-1 of the code.

  tried to flash a version of v2.2 for ZTE c open;
  bricks on the phone;
  tried to boot in fastboot for recovery;
  fastboot is blocked, it is impossible to move the selection with volume +/-buttons;

  error message (see photo):
  E:misssing bitmap installing_text
  (code-1)
  E:misssing bitmap erasing_text
  (code-1)
  E:misssing bitmap no_command_text
  (code-1)
  E:misssing bitmap texte_erreur
  (code-1)
  E: failed to open/tmp/last_install (no such file or directory)
  E: failed to open/tmp/error_code (no such file or directory)
  E: failed to open/tmp/source_code (no such file or directory)

  It fixed;
  had to use a WINDOWS tool provided by comebuy:
  Open_C_upgrade_Tool
  has worked like a charm.

  Section Linux has done does not for me; (https://developer.mozilla.org/en-US/docs/Mozilla/Firefox_OS/Phone_guide/ZTE_OPEN_C#I_bricked_my_phone)

  BUT: does NOT work the software update provided on-line, which is immediately available! Instantly broke again;
  has had to repeat the upgrade of windows

• Impossible to move from iTunes to iTunes 10 9.

  Original title: remove programs__

  Impossible to move from iTunes 9 to iTunes 10 without using a 3rd party removal tool.

  Hi jontron,.

  What happens when you try to upgrade iTunes 9 to iTunes 10?

  You can uninstall all software iTunes from your computer completely. Then, try to download & install iTunes 10.

  a. close iTunes and iPod Updater Utility If a program is running. Press the 'Ctrl', 'Alt' and 'Remove' secret key to bring up the Windows XP Task Manager.

  b. click on the "Processes" tab Look for the process entry named "iPodService.exe." Click on the entry and select "End process" to close the program.

  c. the start menu and choose "Control Panel". Click on the link "Add or remove programs".

  d. scroll down the list of programs currently installed on your hard drive. Click on the entry "iTunes" and then click on the button 'delete '. Click 'Yes' when prompted to confirm the decision.

  e. click 'No' If a window appears prompting you to restart Windows XP. Look for the entry 'iPod Updater' in the list of programs.

  f. click on the entry and then follow the same procedure to remove the program. Restart the computer.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My "move" tool does not work as usual.

  My move tool does not work as usual.

  After pasting an image into a new model, it is impossible to move around, to position the image on a desirable location. The photo is back in the middle of the model as soon as I leave the mouse.

  This is a silly question, I know... I'm sure that some button is locked or not well placed, but I can't find the solution.

  It would be great if someone could give me a clue...

  Thanks in advance,

  Bottom

  

• Trackpad MacBook Pro late 2011 does not not after upgrade

  I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

  Hello Med_,

  Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

  You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Reset the management system (SCM) controller on your Mac.

  If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  See you soon!

• after upgrade to macOS sierra cannot connect to citrix receiver apps

  I use Citrix receiver apps to make my day to day work. The same citrix apps are also accessible via a web browser (Safari) and everything worked fine until the version IE Capitan.

  After upgrade to macOS sierra I can't you connect/launch of citrix apps. I tried with receiver and citrix via web browser as well, but its not connecting.

  Is anyone else facing the same issue or know the fix.

  Earlier, I thought that maybe some problem of connectivity, but after a lot of troubleshooting it still did not work and shows the same error "failed to initialize." (attached image).

  Then clicked on suddenly to mind that I just upgraded my MacBook OS. In order to confirm if his new problem of macOS or anything else, I have installed Windows 10 on vmware fusion and tried to connect to citrix receiver and it worked only! without any operation of additional troubleshooting, it is confirmed that the issue is again macOS.

  So as a temporary workaround, you can use virtual windows OS on top of the operating system Mac OS page sierra to launch citrix applications.

  But apple needs to fix in the Sierra.

  This seems to be, in part, a browser problem.

  Have you tried, since El Capitan or Sierra, another browser?

  And it would move from Citrix to make their applications compatible with OSX.