Impossible to reactivate the backup under Windows 7 Ultimate plan

Similar Questions

• Impossible to mount the backup on Windows 7 Ultimate SP1 with Windows Home Server PP3

  I read that the issue of not being able to mount backups has been resolved in Power Pack 3, but I get the error "Unable to backup up" when it comes to 81%

  Hello

  The question you posted would be better suited in the TechNet Forums. I suggest you post your application follow the link.
  http://social.Microsoft.com/forums/en-us/whssoftware/threads

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• update of the bios under windows 8.1

  I am trying to install a new graphics card (gtx750ti) than ATI Radeon HD 4600 Series (Microsoft Corporation - WDDM v1.1) and have updated to 750w power supply. Turn on the pc and no video, the pc is running but nothing on the monitor. Map vid tested on another machine it works fine, they suggested the bios update. I hesitate to update because there is no udate windows 8.1, any suggestions?

  Name of the Microsoft Windows OS 8.1 Pro with Media Center
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name ROBERT-PC
  System manufacturer HP-Pavilion
  A6652f model FK574AA-A2L system
  System Type x 64-based PC
  SKU FK574AA #A2L system
  Processor Intel (r) Core (TM) 2 Quad CPU Q8200-2.33 GHz, 2333 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 5.43, 2009-09-10
  SMBIOS 2.5 version
  Embedded Controller Version 255.255
  BIOS Legacy Mode
  Baseboard manufacturer PEGATRON CORPORATION
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.3.9600.17031".
  User name Robert-PC\ROBERT-PC\Robert
  Eastern Daylight Time zone
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  Available physical memory 1.95 GB
  Total virtual memory 8.00 GB
  5.72 GB available virtual memory
  Page file space 4.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM Monitor Mode Extensions not
  Hyper-V - second level address translation Extensions No.
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  update of the bios under windows 8.1

• Wireless display on VPCZ 1390 X under WINDOWS 7 Ultimate

  Does anyone know if Sony Vaio VPCZ 1390 X under WINDOWS 7 Ultimate a WIDI. The card says it does. When I called SONY tech support said there and it just needs to be activated. A second tech support says that this isn't. can someone tell me how to check or instal WIDI for wwireless display?

  Thank you. I'll check my system.

• With the help of Windows 7 Ultimate with traditional programs Chinese

  Currently I am on Windows Pro 2000 traditional Chinese version (Taiwan) that I bought and brought back to the States with me. With programs more and more does not support this version of Windows, I'm looking to upgrade my OS. My problem is not so much to be able to read and write Chinese characters, I know I can (I have a LT with Vista Home Prem, who can do the same), but rather whether or not I can install my Chinese traditional programs on this computer and run. On my laptop, Vista will not work their due to the fact all the menus on the toolbar or place dialog boxes are able to output Chinese characters. Under Windows 7 Ultimate will solve this problem or should I wait and get a copy of Windows 7 in traditional Chinese (localized version)? Writing Chinese on my laptop with Vista is terrible compared to the use of the localized version of the traditional Chinese. Thanks for your comments.

  Check this link, could put some light on the question:
  http://www.pinyinjoe.com/Windows-7/Win7-Chinese-intro.htm

  All the best!

• I have two Acer ASpire laptops. They are totally frozen because of the virus. I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement. I have to rebuild my laptop.

  I have two Acer Aspire laptops.  They are totally frozen because of the virus.
  I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
  I have to rebuild my laptop.

  Hello

  No - what are the two Acers come with a recovery disk?

  If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.

  With an Acer, you press Alt + F10 at startup to start the recovery process.

  All data are lost when you do the above.

  And for the lost disc, contact Acer and ask them to send you recovery disks.

  They do that for a small fee:

  http://us-store.Acer.com/RCD/

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• What is the price of Windows 7 Ultimate 64 bit in India now?

  * Original title: price

  What is the price of Windows 7 Ultimate 64 bit in India now?

  Check local computer stores where they sell software and products.

• How to delete on the keyboard to Windows 7 ultimate constantly screen?

  Original title: the keyboard screen problem

  How to delete on the keyboard to Windows 7 ultimate constantly screen?

  I don't know how to turn it off, but I want out of my system... Now that it is a huge problem for me when I do my work... it is auto started every now and then and has its ALT button still active... If I try to turn it off, it won't get turned off, it starts again on its own.

  Even if I restart my time serveral PC that it attaches...

  Please let me know how to remove this feature from WIndows 7 Ultimate... can be of Regedit... or some other way... but permenantly.

  This give a try.
  Start button > Control Panel > Classic view > accessibility > click on use the computer without a mouse or keyboard > uncheck use on-screen Keyboard > save

  I hope this helps.

• Windows complete PC Backup Image - impossible to restore the backup on my laptop after the restoration of the C drive.

  My user profile is not loaded correctly, and so Sony told me to do a restore of the C drive which took my drive C back to factory settings and lost all my programs and files.  I tried since then to restore the Windows Image backup I did on my external hard drive.

  I open backup and Restore Center, click Advanced Restore, click Advanced Restore again.  The box application to what you want to restore?  The only option is to files from a backup made on a different computer.  I click Next, and he said: select the location of the backup to restore.  Hard drive, cd or dvd option has already found new Volume (e), which is my external hard drive.

  I click Next again, and he says, select dates to restore from.  The only option in the box is dated 2008-01-12 14:14:34 backup location is not available.  My external hard drive has multiple backups on it, including the Windows Backup Image (which was the first backup, I did and it contains 152 GB), and so I do not understand this.

  I continue, and then click Next.  It now says select files and folders to be restored, but there is nothing in the box.  I have check the restore everything in this backup box and click Next.  I save the files restored to the following location - check and navigate to the C drive.  I also check both boxes: restore files to their original subfolders and create a subfolder for the drive letter.  I click on begin to restore, and then he said:

  Restoration was unsuccessful.  Error: the parameter is incorrect. (0 x 80070057)

  I'm desperate to be able to get my programs and files back on my laptop.  I don't understand why the restore function can not see my Windows Backup Image, and why this is so difficult.  I've read other complaints by users about this, but cannot find a solution.

  I look forward to hear from you.

  Thank you.

  Hi HGHFaith,

  I suggest you try the following steps:

  Step 1 : Clean boot the computer and then try to restore

   

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Run Check disk to repair bad sectors on the hard drive.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. type E: (external drive) and press enter

  c. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check whether the problem is resolved

  For more information, see the link below

  Restore your computer from a system image backup

  HTT://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Getting the 80070005 error during the backup with windows vista home premium then closes backup

  When I use backup in windows I get errors then backup closes. the errors were 0x800700AA and now 0x80070005. I'm not familiar with what they mean but have tried Fixit without success.

  Hi Brian,.

  This error code means that the file or folder you want to backup does not have the necessary permissions.

  Method 1:

  If you need to make a backup of any file or folder, please ensure that give you all the permissions for that particular file or folder.

  To set the permissions of files, see the procedure below:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab.

  c. under group or user names, click your name to see the permissions you have.

  d. If they don't get permission, click on change and give the full control.

  e. then check if you are able to backup.

  What are the permissions?

  Method 2: Check if you are able to backup by following these steps:

  Try to temporarily disable your anti-virus and malware during execution of the backup. If the backup works fine, then you have to search for updates and firewall settings in the security software.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Method 3:

  Disable UAC during backup control.

  Enable or disable the User Account Control

  Note: Make sure that you enable user account control and the back of the antivirus on the computer after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

• Error: The system cannot find the specified file (0 x 80070002), when you perform the backup of Windows.

  Original title: missing for InputPersonalization file

  I used the Windows 7 backup utility for several years and recently it has begun to generate the following error:

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\InputPersonalization file. Error: (the system cannot find the specified file. (0 x 80070002)

  I checked with Windows Explorer and confirmed that this file does not exist in this way. Instead, the file exists in the path under my local account.

  How can I stop this error? In addition to a clean backup, I like to keep the overall system as clean as possible.

  Hi Jeff,

  Thanks for joining us.

  Please visit the following link to resolve this problem:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281/en-AU

  Scenario 1 is similar to the issue that you are facing. However, you can also try the steps outlined in the other scenarios and see if the problem is resolved.

  Please, try the steps and get back to us with the State of the question.

• How can I save my files to the computer under Windows XP Home Edition?

  OneCare.Live had instructions on how to back up my files when I use Windows XP Home Edition, and I want to use the backup utility. He talked about having to install the backup utility, but I don't have the instructions. Help, please.

  You will need your operating system CD.

  If you insert it into your CD drive.

  When welcome appears, click on exit.

  Make a right click my computer in the Start Menu and click on open.

  Right-click on the icon for Windows XP Home edition and click on explore.

  Double-click the VALUEADD.

  Double-click MFST.

  Double-click NTBACKUP.

  Double-click NTBACKUP. MSI.

  It automatically installs Backup.

  Click Finish and close all open windows.

  Remove the CD from the BONE of the reader.

  Click Start, all programs, accessories, system, backup tools!

  Have fun!

• You try to run the backup under Vista, error 800704 3

  My computer uses windows vista Home premium. When I try to run a backup I get error code 800704 3. I don't know what is this error, anyone know and how to fix it.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.