Impossible to mount the backup on Windows 7 Ultimate SP1 with Windows Home Server PP3

Similar Questions

• Path of update for Windows Home Server PP3 to Windows Home Server 2011

  I think to buy a server backup Lacie 5big network, which is running Windows® Home Server PP3 and I was wondering wither or not, it would be possible to upgrade to Windows® Home Server 2011 when it comes out? MrAlikor - coding away as usual

  Transfer your question in the appropriate Forum to WSUS :

  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads>

• Impossible to reactivate the backup under Windows 7 Ultimate plan

  I have been using windows 7 Ultimate on my Toshiba laptop for about 2 years. I've implemented a backup plan to backup every 28 days.

  It has worked to safeguard the 28/08/2012. However, it will not activate a backup for 30/09/2012 what do I change to reactivate the plan again?

  When I click on 'Backup now' nothing of backup jobs does not start and I can't change my backup settings, what do I do?

  Kind regards

  Donald Edmunds (Australia)

  E-mail: * e-mail address is removed from the privacy *.

  Hello DonaldEdmunds,

  Run SFC/scannow to see if you have corrupted system files. It may take a long time to run depending on the size of your disk.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Try the backup again and see if you can make it work.

  Then check the event viewer to see if there are errors on the backup. Check the system event log and application logs. Then copy and paste errors in your response.

  Please answer back with an update on your status.

  Thank you

  Marilyn

• Dell Optiplex 3040 MT - in the BIOS there is no option to select "ATA" for SATA Operation! (Impossible to deploy the Image system Windows 2008 Server in AHCI Mode)

  Dear Experts,

  I am unable to find the "ATA" option in dell optiplex 3040mt. where might not deploy top Windows Server 2008 image.
  In dell 3020 I deploy the image using ATA mode.
   
  Please tell us how to activate the "ATA" option in Optiplex 3040 and install windows server 2008.

  Thank you!

  Jesse There is no option in 3040 because the ATA mode is no longer supported.  F6 drivers are REQUIRED for windows 7, 8 or 10.   XP/VISTA is not supported at all and will not be installed.

  AHCI is the only option available in the modern Bios and chipsets.

  The INTEL RST F6 drivers are REQUIRED for all advanced sector format 4 k drives. Most of all the readers

  https://Downloadcenter.Intel.com/download/25165/

  

• Cannot install the Windows Home Server Vail connector

  WHS vail connector installation

  Hello fishman6709,

  Look at the post in the forum TechNet on the WHS vail connector installation failed.
  http://social.Microsoft.com/forums/en-us/whsvailbeta/thread/a8a22981-353A-497b-8c40-1e346e514e92

  You can post in the forums of Windows Home Server for better support. http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  I hope this helps.

  Thank you

• Transfer a Windows Home Server o/s

  I have a HP MediaSmart EX487 server whose power died.  It was running the Windows Home Server operating system.  Can I remove the system disk and Server data readers and install it on a custom PC pretty new, turn the PC into a server without damaging anything?  I have all the disks from HP, but do not specifically have a WHS disc.

  HP MediaSmart Server EX487

  Celeron 2.0 Ghz 64-bit processor

  3.5 to disks (2 750 GB drives) and 2-1 to

  Windows Home Server o/s works on 1 of the drives 750Go

  New PC:

  Intel Socket 1156

  processor i3-530 2.93 GHz

  8 GB of DDR3 memory

  Gigabyte P55A-UD7 motherboard

  6 SATA connectors

  2 LG DVD R/W drives

  Two monitors

  Mouse and USB keyboard

  Please transfer your inquiry to the most appropriate Windows Home Server SoftwareForum.  Thank you!

• Problem with Windows Home Server 2011 licens?

  I recently bought a custom, compatible material to try the beta version of Windows Home Server 2011 (Vail), and now I want to upgrade to the full version. How do I proceed because there is only an OEM version of the operating system?

  Please repost your request in the good Forum Windows Home Server.  Thank you!

• installing windows home server stop error blue screen 0x0000007b

  I want to install Windows Home server on a processor intel DH57JG motherboard with a processor Intel i5 650 CPU and 4 GB of Ram Kingston.

  I have 4 2 TB Samsung than hard drives in raid 5
  To make the bootable Raid 5 I partitioned into 2 drives the first being under the 2047 GB.
  The first part of the installation went well until I asked the question of f6.
  I downloaded the driver diskette file required to Intelbut she is 3 years old and says nothing on my motherboard.
  Ignore this as I get the Blue Screen of Death with the above Stop message.
  Any ideas anyone

  Hello

  Since your question involves the use of Windows Home Server please join the Windows Home Server Support Forums. They specialize in THIS type of environment Pro and will be better suited to help you.

  Windows Home Server Forums
  http://social.Microsoft.com/forums/en/whshardware/threads

• Missing functionality of Windows Home Server 2011 Add-Ins

  I just installed WHS 2011 RC and it's great... BUT I can't get any Add-Ins working.

  I installed a couple of them, and they appear in the list of the Add-In, but not in the title. (Or watch the Launchpad for Office Add-In section.

  Hello StefEBear,

  There is a separate forum for posting questions about Windows Home Server.
  Click on the link below for the forum for Windows Home Server.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  They have experts on Windows Home Server that will be better able to answer your questions.

  Sincerely,

• Windows Home Server 11

  Hello

  As I read about the details of Windows Home Server, I found that it is used for the sharing of data (documents, music, movies, etc.) with your home network.

  I would like to understand in detail (but simple language please) how it is diff from LAN (network working group) of normal file sharing, we create to share data/files diff between diff windows pc in our Home/office

  wishes

  Hello

  Windows Home Server is supported in this Microsoft forum:

  http://social.microsoft.com/Forums/en-US/home?category=WindowsHomeServer .

  The people can be better placed to answer your question.

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Tab Windows Home Server 2011 dashboard computers and backup no longer displays the server as a backup computer

  The tab of my Windows Home Server 2011 Dashboard under computers and save watch is no longer the server as a backup computer.  I have a drive that is put in place and it appears in the server hard drives and folders tab. So I can't say if the server is the backup folders designated or not. Help is appreciated!

  Hi Curleyjack,

  Since the issue is with Windows Home Server, I suggest that you post your question in the Forums Windows Home Server.

  Windows Home Server Forum

• Windows Home Server errors when trying to mount an old backup

  I use Windows Home Server to backup multiple machines at home.  One of my old machines died in 2010, and although I thought I had put all my data off of it when switching to a new machine, I kept the old backups autour on the WHS as a precaution.  Of course, I missed a file.  So, I tried to view the last backup and got an error in editing to 79% of the way.  I kept several backups, so I tried the next to the last backup.  Same editing error, as 79%.  He is the 2008 edition of WHS, up-to-date with patches.  I already tried the integrated process of repair, and the journal that it generated did not show any errors on these backups.  Someone has seen this and know a fix?  Thank you.

  Hello ken,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Social TechNet forums.

  http://social.Microsoft.com/forums/en-us/home?Forum=whssoftware

  Thank you

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Driver Realtek NIC missing after the previous Windows Update on window Home Server 2011

  During the last windows update, I lost the Realtek NIC driver on windows home server 2011. If you do not have the backup, is the only way rebuild machine or there is another way to install the driver software.

  Hello

  Since the problem is specific to the window Home Server 2011, I suggest that the validation of the query on the forum link mentioned here.

  http://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  They are a team of dedicated support, helping issues related to servers in the window of the House.

  Hope the information is useful.