Impossible to reinstall Windows 7 after installation of 10

Similar Questions

• Impossible to reinstall Windows on Satellite A105-S2141

  I have a Toshiba Satellite A105-S2141 I'm trying to reinstall Windows on after a bad virus infection. When I entered the Windows CD (OEM cd, not original) and it loads all the drivers it BSOD PAge_Fault_In_Non_Paged_Area with 0 x 50.
  I ran several diagnostics hardware on the machine (memtest, hard drive tests, winstress) and nothing comes back bad. I put in a disk of Vista for sh * s and giggles and it loads fine.

  At this point, I think that it is a SATA driver that must be loaded with Windows. I can't find this driver anywhere
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1373531& rpn = PSAA5U & modelFilter = A105-S2141 & SelCategorie = 3 & selFamily = 1073768663

  There is the link to the support page for this model of laptop. I've also updated BIOS firmware to the latest version, I tried the BIOS driver loaded on a disk without result.
  I am really confused and this laptop is no good for me at the moment.

  And what version of Windows you want to install?

• What do I need to uninstall Windows 7 after installation of Windows 10?

  What do I need to uninstall Windows 7 after installation of Windows 10?

  You upgrade from Windows 7 to Windows 10?  If so, how it remains on the disk?

  If your question is about whether the operating system that is used to qualify for upgrade can be used even if it is still eligible for the upgrade, the answer is no it is essential will be blocked until the upgrade is removed during the reinstallation of the old operating system.  Then it may take wake-up phone to retrieve the old operating system license.  Also is it better to keep the old operating system using a Windows 7 System Image backup which can recover the old BONES in 20 minutes and preserves the activation.

  Let us know if that answers your question.

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Acrobat CC takes windows programs after installation and the change of the icons of other programs

  For about a year Acrobat DC returned to other Windows programs after installation and changed the icons of other programs.

  Then, I had to uninstall it in order to use the PC, Win 7 64 Pro. I.e. When you click Word, Acrobat DC opens and then report it cannot open the word file.

  I see no chanhes in the list of Standard programs.

  Same result with Cloud installion and leading direct download.

  Any suggestions?

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• Cannot reinstall Windows XP after the removal of Windows 8. The installation does not complete.

  I installed win 8 January last on a xp pro machine, which was in surplus. I uninstalled the victory 8 and now impossible to reinstall win xp pro

  The computer is a homemade which ran from win xp pro for several years. I installed win 8 trial knowing that it would take a new installation of XP Pro after the expiration of the 8 victory. I have reset my bios on a cd first and started in the installation cd after installing win xp, it went to boot, and the cd has been removed. a restart was launched and he went into the bios to save install and after the robot below the windows splash logo made 3 passes, he stopped at halfway. After this is is spent in attempts to bppting I noticed that whenever the start stopped he left the Num lock, cap lock, and scroll liux lights were all on on the keyboard. I traded my keyboard with one of my current computer and it always occurres. I started to reload several times now and always the same. No bios settings have helped.

  Hello

  Unplug the machine to see if this allows the machine to reinstall the operating system of any material not needed (such as printers, fax, speakers, USB devices (except keyboard and mouse), Internet connections, etc.).

• Impossible to reinstall windows after having disinfected disc

  Hello experts,

  I ran the disk on an elitebook8470p Sanitizer. She completed successfully, wiping everything as planned.

  Now I am trying to reinstall windows 7, using the "windows repair disc" I created with the hp utility.

  Problem is, there is no option to install windows 7.

  Just a bunch of options to repair, diagnose or reinstall from an image (but it has not listed to choose from images).

  Don't I have the wrong disc?

  Can someone share a list of steps to follow after disinfection drive contest?

  Thank you

  Hello

  The repair disk you mention does not contain the files to reinstall Windows 7, it simply provides a way to access recovery and diagnostic option etc.

  There are two options available.

  1. you can order the HP operating system recovery disc.

  Contact HP.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc you using another PC - just download the good Disk Image ( that must be the same version that originally came with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You will find additional and software drivers for your laptop here.

  Best regards

  DP - K

• Reinstalled Windows XP after the installation of computer hardware, has now lost all my old icons

  I upgraded the card mother, memory and CPU.  Kept the old SATA hard drive.
  Reinstalled Windows XP.  Now, I have no icons, like a new computer.  All my programs are on the C: drive, but none of the programs appear on the start-> list all programs.
  It's like I'm a new user.
  Any ideas?  I wish I had my old office back.  At least all of my data, photos are always "there".
  Thank you

  Hi Lohof,

  Thank you for visiting the Microsoft Windows Vista Forums.

  The computer with the questions has Windows XP installed and this forum is for Windows Vista. You can visit the following link to get the best answers to issues with Windows XP.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  All the best and hope that you get the back of the computer and run as soon as possible.

  Thank you, and in what concerns:
  Syed V - Microsoft technical support.

• Tecra S11 - How to reinstall Windows 7 after upgrading the HARD drive?

  How to reinstall Windows 7 pro after an upgrade to 500 GB HARD drive? How to access password protected data after relocation? How can I get a professional installation of Windows 7 DVD?

  (I do not installed new HARD drive yet, but I intend)

  Hey Buddy,

  You have created the Toshiba Recovery disk? Perfect!
  After Exchange of HARD drive, you need this you to install Windows 7 disc. The Toshiba Recovery disk contains an image of the factory settings, which means that you will have the factory settings on the new HARD drive after the use of the disc. You must boot from it and follow the instructions on the screen.

  > How to access password protected data after relocation?
  It would be interesting to know what data you mean exactly.
  Before you reinstall Windows, you must back up all data on a disk for example external HARD.

• Reinstall Windows 7 after a hard drive cleanup

  Hello. This is the first time I used any kind of help forum. Yesterday (Christmas day) I got old laptop (Acer Aspire 5100) mother after she got a new. I used Darik Boot and Nuke (DBAN) to wipe the hard drive. 149 GB, only 20ish GB were remaining. Is took about 4 hours and 30 minutes to complete. Of course, being an impatient teenager, I forgot to see if I had a Windows installation disc or other means to reinstall Windows. All hope is lost? Are there ways to reinstall Windows in my current state?

  Use of the image that corresponds to that indicated on the sticker COST of the computer. You will also be able to read the sticker key COA code. If you do not have a COA sticker or it is unreadable, the links to Windows 7 will be of no use to you.

  Microsoft Windows USB/DVD download tool can be used to copy the installation on USB files if you want to install using a USB device. The name feels strange that you do not download Windows using the tool, but use a local ISO image to burn to DVD or copy to USB.

  • Windows 7 Home Premium 32-bit SP1: X 17 - 58996.iso
  • Windows 7 Home Premium SP1 64 bit: X 17 - 58997.iso
  • Windows 7 Professional 32-bit SP1: X 17 - 59183.iso
  • Windows 7 with SP1 64 bit X 17 - 59186.iso professional
  • Windows 7 Ultimate with SP1 32 - bit X-17-59463.iso
  • Windows 7 Ultimate with SP1 64 bit X-17-59465.iso

• Reinstall Windows 7 after upgrading to Vista?

  I have my old watch office that I've upgraded from Vista to Windows 7, and after 4 years I want to reinstall Windows 7 to start fresh. The Vista that was on it, I have the disc Version of OEMs and for Windows 7, I have the disk that was given to me by the technology that made the upgrade for me after that he did the upgrade. It was made by the upgrade online. J' have the product keys for both. My question is: what I have to reinstall the Vista using the disk of Vista (and key) and then go back and reinstall Windows 7 using the Windows 7 disc (and key) or can I just do a custom installation using the disc of Windows 7 only and the product key for this? I just want to wipe all of my drive and start again with nothing other than the Windows 7 above. I've moved to Windows 8 on my new computer, but want to keep my old machine running Windows 7 (I'm sure that all your diehard 7 users understand why!). Please let me know how to do this.

  Thank you

  Just make a custom installation:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Impossible to reinstall Windows 8

  Hi, I have recently built an ordered new computer and windows installation disc 8 with her. I bought a HARD drive with an SSD, so I installed it for the SSD. However I wanted to move my files user on my drive HARD then followed what this guy showed:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/Windows-8-wont-let-me-move-the-appdatalocal-folder/3fd79309-6240-433a-8019-311483f0bda4
  However, when I did, after the reboot, I have been unable to sign and he said that he had no connection service. So I tried to reinstall Windows 8 to my computer from the disk, but I was unable to install it on one of my drives, SSD or HARD disk. I tried to format the two discs of the installer, but anything would work because it is in the wrong format.
  After Formatting disks, when I startup it gives me code error 0xc000000f and tells me to insert the installation media, so I did. But when I do it still does not work and it tells me this file: \WINDOWS\system32\winload.exe is missing. Could someone help me please? I tried searching everywhere online and I can't find all the solutions that work.

  I found the solution to my problem. All I had to do was remove the old partitions on my ssd, and then she could install Windows 8 on the drive.

• Windows 10: After installation

  9 days ago I installed Windows 10 successfully on my iMac end-2012. I wonder since if I still need to keep my USB Flash drive plugged after installation. I have kept in just in case wherever she would break something and tried to find an answer but decided to ask here. So basically what I have to keep the flash drive in my iMac or will I still be able to run Windows 10 unless it is plugged. Thanks for all who will read this and help me with this problem.

  I see no reason to keep the flash drive is plugged.

  Was this a new installation or an upgrade of Windows 10? Your order of brightness of the keyboard (and other features on the row of function keys) work? Cam sex? Touchpad?

• Toshiba Satellite click 2 Mini - impossible to reinstall Windows OS

  My toshiba mini right2 stopped working so I reset and tried to burn it all up even 10 and 8 to several usb drives windows to reinstall windows but when I boot in windows settings it does not I can't touch the screen to change the options or go forward using the key board.

  the reason why Ive been trying to reinstall windows is because when I get to the windows 10 setting screen I fit my WiFi settings and English then the pc says please wait a minute later the screen flashes black and it restarts and I have to enter the settings again I have reset several times the pc sent do reboot if I leave the Park to language select on-screen.

  Toshiba wants 80 pounds just to reinstall windows, but I don't know how they're going to do if I can't

  If you have re-installed Windows successfully, but when he starts at the 'first time' Settings Wizard, where you enter the name of the computer, the user name, the wifi settings, etc you can not use the touchscreen or keyboard? I had this problem before as well. If you have a new installation of Windows then the drivers for the keyboard and touch screen are not available. The only way around this is to plug in a USB keyboard. I don't remember exactly, but I do not think the USB full-size on the keyboard dock works until the driver is installed, so you may need to get an adapter USB On The Go, so you can plug a USB keyboard full size in on the Tablet microUSB port.