Impossible to update Alpha UI - incredibly slow server and connection drivers

Similar Questions

• Impossible to update: error message on the BITS and ActiveX

  I need to hurry and to know what is wrong bc I have service pack 1 at the moment and I need service pack 3 b4 the deadline.

  * Title *.
  When I'm tryin g install my updates, he failed for the FORESTS of the installation. Now when I upgrade from windows of th I can't get past the page that said check to see which updates your computer has something and need active x.

  a microsoft web site devoted to service pck 2:

  service of Windows xp pack 2 (sp2) support center

  http://support.Microsoft.com/?PR=WindowsXPSP2

  good to read,

  Windows service pack 2/3 Solver XPS

  http://winhlp.com/node/125

• Impossible to update "site has encountered a problem and cannot display the page you are trying to show."

  When I try to update either using the can I Update or Microsoft Update I get the following message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "

  When I open Microsoft Security Essentials and click Update I get the following message: "the Virus and spyware definitions failed and an error code: 0 x 80070424 message.»

  I am unable to get the position of automatic updates to turn on. I followed a few threads that says run "services.msc" Background Intelligent Transfer Service is ongoing as is the workstation but automatic updates does not appear!

  I tried auto Fix It and automatic installation of updates, but still no luck.

  All the other programs on the seam of my computer for updated correctly. and seams of browser to work properly. I also tried dissabling my firewall and adding the site to my trusted sites update and that didn't work either.

  I'm on PC based on Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Build 2600 on a Toshiba X 86 vs

  Q: which antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?
  A: I do not uninstall [McAfee Security Center before] I installed MSE...

  See...

  Checklist for installation of Microsoft Security Essentials
      http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Should I have any other antivirus software and Microsoft Security Essentials?
      http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx

  ======================================

  You could try the following:

  [You may want to print these instructions for reference offline. [If a step said to restart, restart!]

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  1B. download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall McAfee Security Center & reboot.

  4. make sure that the Windows Firewall is now enabled.

  5. If S * PERAntiSpyware is always installed, uninstall it and reboot again. If not go to # 6's.

  6. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  7. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the automated troubleshooter from end to end. [1]

  9 restart a last time & test. Make absolutely certain that you can update MSE manually using the update on the update tab button.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

• Impossible to update to Windows 8. 1 * and * uninstall KB2871389 fails. I'm stuck.

  Like others, I suffer from problem when updating Windows 8.1 refuses because he thinks I don't have admin rights. It seems that a majority of these cases are fixed by uninstalling Microsoft Update KB2871389 and then re - install.

  However, when I try to do it on my laptop, the uninstall process restarts the machine and restarted, continues the uninstall process until the progress reached 67%, after which I am treated for 'Default configuration Windows Updates' and 'change back '.

  I've tried about 5 - 6 times. Always the same result. Trying to install just the downloaded KB2871389 Installer fails because the installer says that the update is already installed. So, at this point, I figure that I have 3 options:

  1. Somehow use magic of command line to force the update installer to install on the update is already there, or
  2. Understand what causes the uninstall fails (what newspapers I look? I'm looking for?)
  3. Uninstall the update by hand with a tool command line or in a kind of fashion without failure or something.

  Someone has any advice on how to achieve an any of these (or have a 4th option)?

  Hello

  You use a third-party virus protection software?  McAfee, Norton, etc... -Uninstall this software.  Windows 8 comes with pre-installed Windows Defender.  Use the tool to delete this list.

  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Try to use the following to uninstall the KB

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/uninstall-recent-updates-in-repair-mode-via-cmd/a6071159-db22-4076-b5d8-31f446dbdf32

  When you are finished, run the following scans before attempting to upgrade to 8.1 Windows

  Troubleshooting component Store / Filesystem Corruption

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-system/troubleshooting-component-store-system-files/8acbd614-678d-42B9-859c-56d3e6f8342a

• Creating an Image of 2003 server and add drivers LTO

  Hello

  I was given a task of cloning our Server 2008 system, Server 2003 on it, then add new Server 2008 after; but I think there is a much easier way, which is simply create a Server 2003 image and use it with VMWare.

  What we're trying to accomplish is to recover files from our old tapes, and we have a problem with the HP Library and Tape Tools program to recover the data.

  My question is, are there drivers that support by adding the HP StorageWorks Ultrium 920 to a Virtual Machine? It will also recognize the Ribbon when it is inserted? How can I add a tape drive to the VM?

  In my view, this is a much easier option (creating a virtual machine) that cloning, imaging, cloning etc etc etc.

  Please notify.

  try to add to the virtual machine as "SCSI device" generic then

• Peripheral NAT between Security Server and Connection Manager - View 4.6

  Hi all

  I'm trying to deploy a view environment 4.6 - with a view Security Server in the DMZ.

  The DMZ is a NAT entirely would be and isolated network (single firewall, configuration 3-leg-GB-2000 is the model of the firewall).

  
  At this point, just trying to get RDP to work with this configuration.

  The firewall configuration is as follows:

  -Security server IP - 10.1.1.49/24

  -The alias created to view connection server - 10.1.1.100 (NAT IP)

  -Tunnel NAT (with port 8009 and 4001) created between the server connection view and real IP 10.2.2.229 server connection alias

  -The alias created for the view Desktop - 10.1.1.101 (NAT IP)

  -Tunnel NAT (with port 3389) created between Desktop and view real IP Destop 10.2.2.239 view alias

  I can RDP directly since the Security server to the desktop (via the 'alias' 10.1.1.101 IP) view correctly.

  I can connect successfully from the internal network (via IP real office 10.2.2.239).

  When I try to connect via the server of security (from the outside) I get the connection for the initial connection manager, and I choose the pool to connect to. However I'm unable to start a desktop session. The error I get is "the office is currently not available.

  In the event logs on the Manager server connection that I see that the real IP (10.2.2.239) is used to connect to the desktop view - which will not work in this scenario (the 10.1.1.101 alias should be used).

  Has anyone deployed a server of security seen in this scenario?

  Thanks in advance!

  Not sure if it works or not, but there is a GPO that changes the rules to connect using the DNS name.  Is the name DNS returns the correct value, you must connect as?

• Mac incredibly slow after update of El Capitan

  Hello world

  I own a Macbook that I bought in 2013.

  Data sheet:

  13 "medio 2012

  Processor: 2.5 Ghz Intel core i5

  Memory: 4 GB 1600 Mhz DDR3

  Four days ago, that I've updated my system to El Capitan v10.11.6. At first, he seemed to be well-developed, but after about 12 hours, it started to become really slow - and I don't speak incredibly slow. Almost all of the clicks or typing a letter takes forever.

  I downloaded a free version of CleanMyMac, and it shows that I have to constantly only between 50 and 300 MB of RAM free. I also read that you should let Spotlight indexes all yout files, but it maintains at the end and starting over.

  I have about 90 of my 499 GB hard drive on the left.

  Any ideas or solutions?

  Two suggestions:

  Dump to clean my mac it's crapware.

  Run EtreCheck and report results here - often your problems are caused by incompatible third-party software and someone here might be able to spot it.

• The mail is incredibly slow since the update to El Capitan

  Hey,.

  I use Mac OS X El Capitan v. 10.11.1 on a MacBook Pro, 2.8 GHz i7 with 16 GB of RAM. I'm 50 Mbit DSL online.

  I never had any problems with sending or receiving mail. But since I upgraded to El Capitan Mac Mail has gotten incredibly slow and almost unusable. It will take up to 10 minutes to load a simple text message or attachment of the small (less than 1 MB) image. I don't have these problems when downloading something from a Web site. Download a 3 MB file takes 1-2 seconds.

  Also sending emails is incredibly slow. It takes several minutes, also just for the mails in plain text.

  And then Mac Mail seems often to synchronize, even if there is no new messages. It displays "loading 10 of 32 messages" which is stuck and loads forever. And nothing will happen until I restart Mac Mail several times.

  I am managing 5 accounts IMAP with Mac Mail, which is more than usual but not an absurd number. In addition, I never had problems before. They are partly accounts Google App and partially Zoho.com.

  Apple: What can I do to recover usable e-mail software? I don't want to go, but I have to examine it if it takes 10 minutes for an attachment to load.

  Thank you

  That has solved it for me (found here on the forum):

  • Make a backup
  • Close mail
  • Copy the ~/Library/Containers/com.apple.mail folder to a different location (in case something goes wrong)
  • Delete the ~/Library/Containers/com.apple.mail folder
  • Restart the messaging

  You will need to reconfigure parts of the mail, but it is now much faster. Let's see if that is still true.

• Impossible to update 10.11.5 download stops about 100 MB download!

  

  Impossible to update 10.11.5

  It stops at about 100 MB to download!

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

  
  

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start the computer in Safe Mode , and then restart normally. It will be slower that a normal restart, so be patient.

  Download OS X El Capitan 10.11.5 Combo Update and install it.

• Computer pavilion laptop i7 incredibly slow

  Hi, I have a hp pavilion 2321ss g6 with a processor intel core i7. I had for about 2 years. It had not occurred to me to use this forum til now.

  Initially, he had run on win8, but he was almost inoperative (very slow) and I have upgraded to windows 10.

  As I installed the new computer system was incredibly slow and lazy. Opening a program, for example a browser may take more than a minute, making it unusable. Old computers are faster. I think all the updates on the system are made.

  Startup time is 300 seconds, and after that start it does not work well, on the contrary, it takes time to "warm up".

  What can I do?

  Thank you

  Lisa

  Please follow the troubleshooting and suggestions to this sticky following.

  http://h30434.www3.HP.com/T5/Notebook-software-and-how-to-questions/my-computer-is-running-slow/m-p/5599548#M206024

• AZ-605 new incredibly slow

  I have new AZ-605-UR23 which is a really nice computer, but is incredibly slow.  I migrated to a more old Pentium 3 Windows XP set up that was lightning fast. I must say at the outset that my computer skills are minimal so feel free to correct any assumptions I could have done. My system came with windows installed 8.0 and I upgraded to 8.1.  I checked the Acer website after seeing an analysis of Belarc on my computer missed me 3 updates of pilot.  I downloaded and install in awhile.

  The problem, I ran in - I ran a few software - driverupdate.com [the site says it's as a Microsoft certified partner, so I guess it is reputible].  When I downloaded their software and ran it the result was that I have 13 drivers that are obsolete.  Looking for acer driver update site again there are only 3 updates [the ones I downloaded] 8.1.  When I looked for 8.0 updates the names of the pilots did not correspond to the specific series listed at Acer. some of the manufacturers [Intel and Realtek] were the same, but others [for example, liteon, wistron, NVIDIA] were not on my list.

  I called support and told to download and install all the drivers of 8.0 and my system would be fixed.  I kept stressing that none of the names was the same, but the response was the same.  New - I'm obviously not an expert, but I don't want to make a mistake and have to go back to something stupid.

  Thanks a lot for any help

  Yet once again, I want to thank everyone for their help!  My Acer has been lowered to 8.0 and I'm a happy camper.  I'm always implemented, but should be finished today.

  I just wanted to share something that can have an impact on the whole of the problem initially, I remind you all that I am not a techie and where what I say is incredibly stupid please don't laugh too hard.

  Yesterday I was checking pre-sets on 8.0 and discovered that MS patches are updated automatically.  I thought that was the case because he had some sort of update itself installed approximately 0300 Saturday morning.  In any case, earlier I had checked something on the Panel "information on the performance and tools" and generated a small report I printed "more details on my computer" which assessed my computer at a 9.9 3.9. There was a date on this report was dated June 13, 2013.  I bought the computer the first week of December and received mid-December.  I'm assuming that this date indicates when the sysytm was put in place and is "birthday" of the computer.

  This prompted me to check the line on the updated area that was something like update history.  History has shown that I was GONE 90 essential or important updates! When the computer has been unpacked and physically put in place, I think I remember that I was prompted to download 8.1 immediately before continuing the installation of things.  A hacker has helped me set up and started the update and returned the next day to finish the rest of the installation.

  Bottom line - 8.1 has been installed on a system lacking 90 updates to the previous version of a system, it was the upgrade.  An assumption on my part, is that the missing updates would have been necessary for the 8.1 install to be indeed installed.  I have to download/install updates 90 on the current system of 8.0; It seems to work even better was the case prior to the updates and it was working fine before.

  In fact, the only reason why I'm writing this is in the offchance I'm right and that was the problem, it can help someone else.  The solution proposed by the members of the forum was right on - wish I had not feared to do so and stopped what I was doing and just downgraded.  8.0 seems really easy and everything works fine.

  Daisy

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Windows Server 2008 R2 gets really slow, loses the connection, network printers.

  I have a Windows Server 2008 R2, Dell PowerEdge T610 which very often at a time, it is really slow, loses the connection to all network printers and network resources are limited. We check scheduled task, updates of Windows and go on throughout this period. We check the event viewer, and there is nothing extraordinary. Does anyone have any ideas or suggestions?

  Hello

  Sorry for the inconvenience that you are experiencing.

  Since we are unable to help you better on the problems associated with Windows Server 2008 R2. Our TechNet team have the expertise to help guide you accordingly.

  That's why I ask you to please get in touch with our TechNet support team to resolve the issue.

  I appreciate your cooperation in this regard.

  Hope this will answer your query.

• Adobe Photoshop CC 2015 is compatible with Windows 10. The mine opens, but does not seem to work correctly... INCREDIBLY slow. Does not. Must I return to Windows 8?

  Adobe photoshop cc 2015 is compatible with windows 10? Just upgraded Windows 8 and PS opens but does not work properly. INCREDIBLY SLOW. What I can do or should I return to Windows 8? Windows love 10. Disappointed.

  Hi Ravenm,

  Could you please check and make sure that Photoshop is updated to the latest version 2015.1.2

  Also, please try the steps in the following article: Optimize performance Adobe Photoshop CC

  Let me know if it helps.

  Concerning

  Tanuj

• First CC2015 - interaction of the interface is incredibly slow.

  Hello!

  As shown in the topic I have a problem with that. I recently installed CC15 on a new system, all the drivers/codecs are updated.
  Play or rub through images is no problem, but interactions with the interface is incredibly slow. -> (Registration form: PCC15 - YouTube )
  Trimming or moving of clips is not very pleasant. I tried switching MPE software, no difference.

  
  It is exactly the same in CC14 as I tried to install it as well. Everything worked flawlessly on my system (cc14) previous, the problem started with the new facility.

  
  The material should not be a problem. As it worked fine on my old spec (i7 2600 k @ 4.4 Ghz/16 GB / GTX770)

  HW specs:
  Intel Xeon 2.3 ghz 10 c 2650v3
  32 GB DDR4
  WD Black drives
  GeForce GTX770

  Does anyone have a solution to this? Or can someone help me to identify the origin of problems?
  Thanks in advance people.

  Kim

  I thought I'd share the solution that worked for me on this issue.
  I just disabled windows Aero theme 7, and he began to work as fast as it should.