improve performance slow/windows system boot problem/screen becomes white.

Similar Questions

• screen become white

  Hello, I have a laptop of HP G60 - 443CL and running windows 7. My screen become white at different positions that it is open. I can get the screen to stay when I opened it all the way. At the time it will start blinking and then turn white, and I have to continue to play with the position of the screen so he can stay on. IM wondering if I need a new screen or if it has something to do with the video

  It sounds like a bad connection. You must have your portable inspected. It is always in the period of guarantee?

  You can check that it is not the video solution by connecting an external monitor to see if the problem is replicated. I think that it is probably not the case.

• screen becomes white and the exclamation point appears in the middle of the circle

  original title: screen become white

  Sometimes my screen become white and a circle appears in the middle of the screen and there is an exclamation mark in the middle of the circle. We know what it is?

  Hello ambersnana,

  Often we see odd behavior as the result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• window vista boot blue screen stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Cannot start PC, using Windows vista, download blue screen error stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Hello

  1. do you get this error on startup or when working on the computer?

  2. are you aware or any hardware or software changes to the computer?

  Try to start the computer in safe mode and try to make a System Restore.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  In addition, try and run the steps listed in the link below.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly:

  http://support.Microsoft.com/kb/958233

• 10.11.4 boot problems - black and white death

  Hi people, write here after a weekend of failed attempts to get my iMac 27 "2009 to recover.  I see there are many good suggestions out there on this general problem and I am hoping someone can give some specific advice, as I am now out of options.

  The problem started when I first noticed the screen was all black, but the cursor to move.  I think the problem started 20 or March 21 since the last backup Time Machine was to the 20th.  I had seen this occasionally over the years and so just turned off and restarted.  This time it got stuck on the white screen with the Apple logo and progress bar at halfway.  Finally reading the forum that I realized that I could actually blind the connection by pressing the right keys and hard drive noises I could say it was starting up my apps.  But the screen remains blank, just the cursor moved.  I even tried to remote into my Macbook but that just brought to the top of the black screen too!

  That's so the State of the rest across machine try the following:

  1. Tried to reinstall the OS 10.11.4, it installed OK, but on reboot I have come back to the white screen of death.
  2. Tried Time Machine backup recovery, twice, first go to the last point of restoration, then among a few days earlier which was 10.11.3
  3. Wiped my Bootcamp partition and installed 10.11.4, showed the first home screen, and then it would freeze.  I could access it from secure boot, but could never get the boot on a regular basis at work, the screen remains white death.
  4. Secure boot works on both partitions, but which is as far as I can get it.  Start, I tried the suggestion of delete some items in the Library/Extensions folder, but that did not help.
  5. I also tried to remove the power cable for a minute and restart.  And the thing with now the key Alt Cmd (?) and P and W to erase the memory.  But no help.
  6. I tried to run the diagnostics of material that came on the boot floppies, CD Rom drive would turn a few times, but would not read the disc for some reason any.

  I think that's it, maybe I tried a few other permutations, but it has been a long weekend, and it's all beginning to fade now.

  Since all the restorations did not work it feels like it may be a hardware problem, but it's so consistent in where it fails / stalls on startup and safe mode works OK, it always makes me think that it may be a software.  There is a flash on the right screen to where it crashes on the bar, progress which makes me wonder if this might be the card or display driver problem, but really guess right now.  One last thing that I might have to try is a full erase of all partitions and create a USB stick to boot from.  But I am quite doubtful that it works in light of all other alternatives, I tried.

  Additional ideas would be very appreciated, I know that I had the machine for a long time and many would say it is time to upgrade, but I'm not quire ready for this yet, it really worked great, just a little slow on the restart of the (who fortunately have been rare so far!)

  Hi Mart:

  Sorry to hear about your problems. Looks like you have tried many options.

  Here are a couple more. You will get maybe lucky.

  Computer does not start:

  Try reseting NVRAM. How to reset the NVRAM on your Mac - Apple Support

  Then try reseting SMC. Reset the management system (SCM) controller on your Mac - Apple Support

  Then, try a safe boot. Safe mode try if your Mac does not start-up

  Also, see this help file. If your Mac will not turn on - Apple Support

  Also, see this help file. The elements of opening and start-up troubleshooting

  Also, see this help file. Top 10 tips for troubleshooting Mac startup problems

  To tackle the Macs that always start mode safe. Tackle Macs who always boot mode safe

  Splash screens: on the screens you see when you start your Mac

  Take a go-Genius Bar: Genius Bar

  The assessment will be FREE.

  Kim

• Windows Media Player 11. When I click on full screen, the screen becomes white and the sound still works. Some tips on how to fix?

  I can't get Windows Media Player to become full screen.  The screen turns white, but there still audio.  I just upgraded to version 11, but the problem is still there.  Any advice?

  Yes, the video driver is something else. If you are not familiar with the update of your system... it can be better if you ask someone more experienced to help you.

  The following article provides information on how to identify your video card, how to find a new driver and how to install it:

  How to upgrade drivers for a video card
  http://www.ehow.com/how_5572_upgrade-drivers-video.html

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

• Windows Vista crashes, the screen becomes pink with diagonal dotted lines

  My HP Pavilion DV9500 laptop started making a few months ago:

  The computer and the programs sometimes simply freeze, sometimes the screen becomes a light pink with diagonal lines dotted, and sometimes the laptop itself restarts without warning.  The computer is about 3 years old now and have not had any problems before this.  I tried to do a clean install of the recovery feature that I don't have a Vista disc to reinstall from, and he always does this.  Sometimes the computer will be fine for a few hours and sometimes just after the start it will freeze.  A couple of times too, as it starts, Windows will not start and it will say "Not found operating system".

  Hello

  It sounds like imminent hardware failure/issues. Since you did a clean installation of recovery
  pretty much excludes most of the causes of software if it could be driver related and there are other
  possible causes remotely. Video/display and its drivers are suspected leader and mother.
  Board and power supply.

  Keep good backups and check with a real store of the computer (not the leeks and glances at a BestBuy, etc.)
  BigBox stores) or the manufacturer of your system Support.

  ===============================

  It's my generic convenience store and eventually it can help you determine the cause but I strongly
  suspect material.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Screen become white and white to 90% of the time...

  He began to turn white at random but if I have him on again it usually would go back to normal. Now my 'normal' screen is white and about 10 to 15% of the time I have a normal screen. All the suggestions/help?

  Well, that's weird... I got my 8 GB microSDHC card and and voila... it works again... Hmmm... WTF?

• will I get the improved performance on windows xp using the pagefile in enhanced USB flash

  Lenovo 3000 J200 512 MB RAM slow operation with the new installation of windows.

  How do I do this

  Are you talking about something like ReadyBoost?

  http://en.Wikipedia.org/wiki/ReadyBoost

  That feature (and SuperFetch) are not available in XP.

  My opinion is that unless you know more about managing memory than XP, you must set the option for the paging file to the size of the managed system and just let XP take care of things.

  I read somewhere that there are none or only a performance problem minute if you can get the page file to XP on a USB key.  Keep in mind that flash drives will also be "usury" after a number of cycles of read/write so who knows how long to set up your continue to operate reliably if you were beat your USB device, day and night.

  If your system is slow, you must define what slow means for you and provide more details on your system.

  If you think that it starts too slowly: for example, I would use some software tools to measure boot time to the millisecond so that you can see exactly how long it takes, make some adjustments and measure again to see if things improve.  It allows to eliminate the human element of subjectivity in the matter.

  For example, I know that it takes my system exactly 24.03.024 seconds to start, but I have zero startup items configured at boot time.  Maybe this isn't the right configuration to everyone, but I'm all about the search for better performance.

  If your Lenovo will have more RAM, I would consider that.  512 MB is not a lot and RAM is relatively expensive, these days, and who would probably be on the best thing you could do for your system.  I can run XP with 256 MB, very good (but a bit slow), but more RAM is usually better - seek 2-4 GB if you can rotate.

  If you want someone to watch you have, follow these steps:

  Provide information on your system, the better you can:

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Now make some clarifications:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  I have a list of your startup items will also help.  Here's a way to do it:

  So tell us what are all your startup items and we will help you to look at to see if there are some that you may not need.

  Here's a way to provide a list of your startup items:

  Download and install CCleaner here:

  http://www.Piriform.com/CCleaner

  Launch CCleaner, click on tools, startup and at the bottom right of the screen, click on the button "Save to text file" to save the startup information in a text file (name it something like startup.txt, so you can find it).

  Save the information to your desktop (or somewhere you can find it) start, open the text file with a text editor, select all of the text copy (Ctrl-A) it
  (Ctrl-C) and paste (Ctrl + V) the contents of the startup list of back here for analysis.

  Uninstall CCleaner later if you don't like (most people seem to like for it of other features).

  Here's what my startup.txt file looks like:

  That's right - I have zero startup items.  Maybe this isn't the right configuration to everyone, but I'm all about the search for better performance.

• T400 incredibly slow Windows 7 boot

  Hello

  I came across a problem that I can't bring myself to its cause is a mystery to me:

  I got OEM Vista Ultimate installed on my T400, which worked well, but since I installed Windows 7 today, the windows startup takes unusually long, make me stuck "starting Windows" screen for about 10 minutes each time. Once it starts, it works OK without hiccups or lag whatsoever.

  I have no idea where the root of this problem may be, perhaps this will give you an idea.

  I had two T400 lying around, it had taken defective helmet (stuck somewhere, so the computer assumes that the headphones are always connected, so I could not any sound on the speakers.) As the headphone jack is soldered to the motherboard, I needed to replace the mobo) and the other had it bad LCD. So I decided to use the functional components to build a fully functional T400 and sell the other for parts.

  So what I did:

  -Exchange of the LCD screens (LCD good + good mobo, bad LCD + bad mobo)

  -Exchange processors (because one with defective plug had 2, 53Ghz - anything but the sound was very good! - while the other had only 2, 4 GHz)

  -swapped hard drives (as those with defective jack was the computer I used usually, there were W7 installed, while the other had Vista)

  I put them together and all in one that has Vista booted up quicky as usual (although as before, his mobo was used with a processor more fast and Windows 7), that now with W7 took forever to start up, which has never happened before. I thought it would be because of the CPU (the BIOS reset or disconnect the battery helped CMOS), if I swapped processors once more (-> back to their original mobos). The defective machine with Vista had no problems turning, but it did not help the machine running W7.

  Here is the mystery:

  I swapped hard drives too, so the only change in their original configuration was the display (swapped defective TFT 1280 x 800 for good LED 1440 x 900) and after that two of them were able to start normally.

  But once I erased the disc HARD with Vista on it, which worked very well in the machine where the drive of W7 took forever to start and reloaded Windows 7 at this disk, the problem returned.

  Now I have two T400s with Windows 7, but rather of takes ages to start.

  For the best image:

  T400 No1, original config:	T400 No2, original config:
  Faulty motherboard	Good Mobo
  Good display 1440 x 900	1280 x 800 screen faulty
  PROCESSOR P8700	PROCESSOR P8600
  4 + 2 GB OF RAM	1 + 1 GB RAM
  Intel graphics card	Intel graphics card
  Hard HARD 160 GB w / Windows 7	HDD 160 GB with Windows Vista
  works	works

  T400 No1, current config:	T400 No2, current config:
  Faulty motherboard	Good Mobo
  1280 x 800 screen faulty	Good display 1440 x 900
  PROCESSOR P8700	PROCESSOR P8600
  1 + 1 GB RAM	4 + 2 GB OF RAM
  Intel graphics card	Intel graphics card
  Hard HARD 160 GB w / Windows 7	160 GB HDD with Windows 7, Vista previously
  boots motorcycle quickly	takes forever to start, was OK with Vista

  Please, you have ideas how to redo the slow one usable without going back to vista?

  Any help will be much appreciated, thank you for your patience.

  Hello world! You can check for bent pins usb ports? It sounds weird, I know, but it could be as simple as that...

• Windows Vista boot problems, need to press Ctrl + Alt + Delete to work around

  original title: VISTA Boot Up problem

  I have an emachine with Vista for over 2 years with no problems, but recently, when I turn on the PC I get a black screen that says: "Boot From CD-ROM AHCI.  NVIDIA Boot Agent 249.0542.  Client MAC ADDR: 00 1 D 72 A9 D7 B6 GUIDE FFFFFF... "In order to get past this screen, I press Ctrl-Alt-Del and it will then start VISTA.  The last 3 days, the Ctrl-Alt-Delete method failed the first time and I had to repeat up to 3 times.  Now I wonder how long the Ctrl-Alt-Del bypass method will last.  What can I do to get the pc to boot normally again?

  start in safe mode.

  Choose Repair computer

  Or the last known good configuration.

  If windows loads in safe mode then uninstall any recently installed.

  Maybe do a system restore to an earlier date.

• Windows Vista boot problems, after an automatic update

  Can someone help me with the boot?
  When I start my laptop it goes until is displayed: 'No configuration update 3 of 3' and all stays at 0% for 1 or 2 minutes and after it stops automatically. It restarts again and appears the same following 2 minutes and stops.
  How can I fix this without having to install the DVD? I don't have the installation of my Windows DVD. But with on DVD with also windows vista, I tried to fix it, he showed me that it is not a compatible version of vista on the DVD.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Just another one of those hardcore Windows XP Boot problems...

  Problem summarized: when Windows starts normally loading: "Windows has not start because the following file is missing or damaged: '\system32\hal.dll" Please reinstall a copy of the above file.»  This was due to a damaged boot.ini file (it is without a doubt, don't give me alternatives, I know that's what it is)

  So I'll pass by exactly what is happening, or I can do when I choose options.  NOTE: I DON'T HAVE ANYTHING TO BOOT FROM WINDOWS CD!

  When I turn on my Avertec Netbook with Windows XP computer, the title screen appears, and if I press F2 here, I can access configuration CMOS.  Who has all the BIOS settings and allows me to choose the boot device, I still access all the settings here.

  If I let it continue, it goes to a screen that says "[F5] for HARD drive recovery," and I can also press F8 for advanced here options menu.  (If I let him go, he's going to where Windows would normally begin loading and displays the error message that I listed in the paragraph 'problem summary' at the top).  So if I press F8 and try one of these options, the same error message appears for all options,including the safe mode, can't get on it.

  If I press F5 instead on this screen, it brings me to 'Installation of Windows (active EMS).  A window asking me if I want to restore my hard drive for purchase,I'll not do BUT, there is also a command prompt box (which seems to be the only one, that I can get).  It penetrates into the typed command in "X:\Windows\System32 > ', which I do not know is the right place too try to run startup commands.  Whenever I have type BOOTCFG or any extension of it, he says "ERROR: could not open the TRUNK." INI file.

  I looked around the Internet and these forums to try to understand something, but nothing works.  I have never really been advanced with computers or anything, so if there is someone who knows possible answers, the more detail the better.  Thank you

  Well, I solved the problem a bit.  I accidentally crossed a command "notepad.exe" as I was scrolling with TAB.  He opened a notebook here to restore HARD drive (which is apparently a feature of Vista on a computer made for XP...)  So what?  Well, in the open dialog box, I backed up my data just in case, via copy and paste, AND I found and open the boot.ini file and fixed!

  So now XP will begin to start again, but it still just freezes like before and loading never ends.  Looks like a much simpler problem now, I'll look again through the forums

• Windows 8 boot problem after installing HP 8600

  Hello

  I installed the HP Officejet pro 8600 more on my windows 8, everything has worked (scanning & printing)) except a problem:

  The windows stuck at the starting procedure with a cursor blinking on the black screen.

  When I unplug the printer from the computer, the problem disappeared.

  (and after the boot process, I can connect the printer back to use it).

  What is the problem?

  I installed the latest drivers for windows 8 (64) of HP.

  And maybe one thing I should mention:

  In the properties-> sharing tab I clicked on "Additional driver" and I installed the drivers both x 64 x 86 instead of only x 64.

  Thank you

  Hi avi55,

  The first thing would be to use a USB cable and then make sure that you are connect to a USB 2.0 on motherboard computers. Let me know what you find?

  

• NVIDIA CAUSES BOOT PROBLEMS\ SCREEN DISTRORETED

  REMOVE NIVIDA, STARTS AND RUNS OK \REINSTALL NIVIDA WINDOWS STARTS NOT AND/OR SCREEN DISTORETED.

  Hello
  1. What is the model of your Nvidia video card?
  2 have you made changes to your computer recently?

  It shows that it is a hardware problem; I suggest you to contact Nvidia support and check if it helps.
  http://www.nvidia.com/page/support.html