Improvement of the total system

Similar Questions

• I'll be able to restore the backup taken before improving the operating system of Windows Vista Edition home premium for Windows-8

  I'll be able to restore the backup taken before improving the operating system of Windows Vista Edition home premium for Windows-8

  Hi GOURGOPALGHOSH,

  Welcome to the Microsoft community. Yes, you will be able to restore the backup before the upgrade to Windows 8. Follow these steps:

  (a) press the Windows key + W.

  (b) type of recovering files of Windows 7 , and then press enter.

  (c) restore files.

  I hope this helps. Let us know if you need more assistance.

• The warning event notification: the total capacity of your system hard disk has decreased...

  Original title: the warning event Notification

  I have a Dell Precision M4500 with Intel 5 disc hard 320, Windows Vista 64-bit installed. I have enough space in C: (46.6 GB) and D: (111 GB) virtual memory C: 8192-9216. D: no, every time when I login in the laptop allways displays the following message: decreased the total capacity of the hard drive in your system. In general, this does NOT indicate a hardware failure. Communicate with your HELP
  Office if you did not personally alter the configuration of your system hard disk or disbled in System Setup.Somebody devices help me

  Hello

  ·         Will there be any changes made before this problem?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.

  Step 2: Check the hard disk for errors.

  Follow the steps in http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors

  Note: When you run the disk check, there is a risk of data loss you can take a backup of your files before you run the disk check.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need to improve the performance of a Web site and I want to track the total number of requests per second...

  I need to improve the performance of a Web site and I want to track the total number of requests per second... we are currently hitting...

  Please I need to hit the current with 1200 queries/second application, please help in this regard.

  Hi Nivask,

  If you created the Web site, the question would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for assistance:

  Internet Explorer Web development

• EM12c, improvement of the system of two - Questions about the post-installation steps

  Hi DBA:
  I use two system of EM11.1 process and have updated the SGD. Immediately after the set SGD to level, I went three agents. The agents take on a cluster. I have completed the tasks of post-upgrade deferred Data Migration and the Migration of the accumulated data. Finally, I registered offshore on migration for these three agents and everything seems * fine. My question:
  
  I spent a second set of officers who support another cluster. Is it true that each migrated agent calls for a fresh run of deferred employment data Migration and Migration of the accumulated data?
  
  Thank you
  
  Laura Sallwasser

  Yes, as and when you put agents in batches of the accumulated data Migration task is triggered. To better understand this concept:

  in the approach to upgrade 2-System, you can choose to spend your Management Agents in phases. When a set of Management Agents are passed to the, they start to download data on their hosts and their targets in the improved management repository, while those who are not switched yet, continue to download data from their hosts and the former repository of management targets. Therefore, earlier versions of the Management Agents coexist with those upgraded when only some of them have passed, and in such circumstances, the data are transferred to the former repository of management as well as the other at some point. However, note that a Management Agent only represents a host at some point, so coexistence does not two Agents of management on the same host. It shows only an earlier version of the Management Agent followed by a crowd who cohabits with a upgraded Management Agent, followed by another host.

  When you swtich in the next series of Management Agents in the next phase, although they start to load data into the repository of improved management, the data downloaded to the old management repository before be toggled continue to exist in the repository of the old management.

• Registry Booster Uniblue says I have total of 928 errors on the registry system and users!

  PC seems to work (maybe slow sometimes). Purchase of Registry Booster and system Twecker will really make a difference? ALTERNATIVES?

  How normal is that after four years of use of the lamp?

  You must ignore the report and uninstall Registry Booster.

  RegistryCleaners of the negligible benefits and can create errors intractable system that cannot be resolved by reinstalling the operating system and everything that this implies.

• PSE improve and change the operating system from Windows to Mac

  Hi all

  In 2005 I bought initially PSE 3 and PSP 3 for Windows.

  In 2009, I upgraded to Version 8 for Windows PSE

  Now, I've changed the operating system for MAC and upgraded to PSE & PSP 14.

  When you go to the store, I can select and upgrade package - but only for Windows (I guess because of my previous purchases for Windows).

  How can I change for MAC now?

  Anyone any idea or had the same challenge?

  Thank you very much in advance for any advice or insight.

  
  Michael BR

  Hi Michael BR,

  Please use the following link to upgrade to Photoshop elements 14. See, photo editor software & tools | Adobe Photoshop Elements 14

  There is a drop down next to the platform: Windows click on in order to change for Mac, see the screen capture below.

  

  Photoshop is no longer available as a stand-alone product, and it is only available as a cloud creative/subscription for more information see, pricing and membership creative cloud plans | Adobe Creative Cloud

  Let us know if that helps.

• Improvement of the system: need page file, SSD install tips, etc. Win7 i7 generation

  Gents, it's been 4 years since I built my i7 LGA1155 based system and I have to type of upgrade (sh! t happens). It is not a full upgrade. I don't have enough green to buy a new vid card and am carrying on my storage drive.

  I bought a Samsung 850 Pro 256 GB SSD for my OS. The MB is an ASUS Z97 WiFi ac USB3.1 running a 4 GHz i7. The Z97 has Intel and ASMedia ports.

  
  

  My current configuration has a 120 GB for Win7, two Samsung Spinpoints SSD in RAID 0 as my D drive (my scratch disk, which has worked perfectly) and two WD black 1 TB in a RAID mirror as my E drive where I put all my videos, audio files (mirror raid because I'm insanely paranoid). I have also now a 2 TB backup Synology (external) so that the internal working paper mirror will not be necessary.
  

  
  

  So my setup will be:

  C drive: a single SSD with Windows 7

  D drive: two Samsungs in a RAID 0 (as I have now - although I will buy a large SSD on the road)

  E drive: WD Black (no more than mirror)

  Then readers of DVD and BD.

  I'm using CS5 Production Premium. That's what I have. I will not be able to level up to the end of this year or early next. Updates are no longer available normally, but apparently I can download a significant update to Adobe file and use it to manually update the CS5. I don't have this info right now (I think it is called "mul PremiereProTrial 5.0.3 Adobe UPDATE").

  
  

  It's been so long that I have installed Windows 7 (and I had my favorites on the subject so many links is now dead) I ask some advice on some details.

  My Windows 7 doesn't is selling at retail, but from 2011 so no SP1. I have already downloaded all the updates via WSUS Offline if I can do a proper update once installed Win7. This will be my first time through this method, but people swear by him.

  I know that my older Win7 installation CD will not see the new SSD, so I download the drivers for the SSD and also for my Intel and ASMedia SATA on the Z97 MB ports. I'm still not sure of exactly how this will go.

  A question I have is with the page file. I think that Windows automatically detect it on the operating system drive.

  I should he move to the D drive? I don't want to do anything that could cause me pain. My page file has always been on my C drive (if the memories are good).

  All the tips on this point and in my build system are greatly appreciated. I had so many links is dead now, so I'll try to find what I need. For example, what codecs I should download and install.

  By the way, I'm now change anything over 2 K. It is usually footage DSL, HDCAM stuff, as well as lot of Super8 who was captured 1080 p from QuickTime or ProRes files.

  for the pagefile, advice to move out of the ssd. It was at the time where the ssd did not last very long and it was an attempt to give them a longer life expectancy. now ssd last much longer is allowed to place the pagefile on ssd. When it comes to the filename of the page, you want it on a fast reader. the more memory you have at least windows will have to exchange information in RAM to the paging file. so if you have enough ram, the swap file usage will be less to reduce the wear and tear on any drive.

  codecs must be installed if used as a keeping clutter out of windows. most install quicktime for prores and dnxhd/r codec.

  Apple - QuickTime - Download and watch videos, movies, and shows.

  Avid QuickTime Codecs THE

  for windows 7, you may need to install the card drivers mother sata during the installation of windows 7, so that it can find your disks. someone asked on win7 install recently here: new construction, asking for Windows 7 install tips before you start

  There are a lot of youtube and the windows installation guides 7 online.

• Is this the right time for an improvement of the system?

  Having finally started using the installation of first Pro CS5 that has mainly been used for the better part of the year, I find that my three year old system is need of an upgrade.  It works well enough for the edition, but takes an age to make anything.

  The current system of NY is:

  Q9550

  8 GB DDR2

  2 GB HD4850 (I had with my previous card nVidea drivers problems)

  300 Gb 10 k rpm WD Velociraptor (OS and program files)

  150 GB 7 k 4 RPM Velociraptor (stripes only)

  2 x WD black 1 TB internal

  2 x WD 1 TB external USB3 (I like these.)  They are about as fast as my internal drives)

  Gigabyte power 650W

  Windows 7 Home Premium 64 bit (OEM version) that replaced Win XP 32 bit with only 4 GB of DDR2 and made a lot of difference with Photoshop.

  I think similar to

  I7 2600 K

  Gigabyte Z68XP-UD3-iSSD (with the 20 GB SSD on the map)

  GTX470

  24 GB of DDR3 memory

  Windows Professional (to access the 24 GB of RAM)

  I hope to keep my current box and the PSU.

  Issues related to the:

  (1) would it be a good idea to get a second 300 Gb 10 k rpm Velociraptor and Raid 0 them?   I think it would give me useful capacity and speed for the C: drive, and I wouldn't have to wait for my data drives to wake up.

  (2) the person performing the upgrade tells me that he has much spent with this time - especially with AMD processors.  Intel only resemble revise the i7 to a 2700K with an another 100 Hz which looks stupid with the 2600 k being so easy to OC.  Is it worth of waiting?  I know that advises the usual for this kind of question is there is always something to come along, then get on and enjoy what's available now.

  Thank you very much

  Of course, now is not the right time to upgrade, with the new Intel processors and appropriate motherboards that will be released next month?  I know that he will remove the 4 sticks of memory - limit I've seen pictures of motherboards with 8 memory slots.  Will be also lifted the restriction on the PCI express lanes.  As they must be passionate oriented, there are 6 core processors, and I hope there will be Asus cards without the integrated Intel graphics card.  Rumor has it that would however be much gain in speed.

  I'm in the same position as the OP - a system of 3 years, but with a slightly more powerful processor.  Dear as I would have liked to pass earlier this year, I have steeled myself to wait until February when I return from my winter migration.  Here, problems of teeth with the new processors and motherboards must be known.

• Total physical memory and the total virtual memory

  Hello

  When I checked the repressive information of my laptop computer on which Windows XP SP3 installed, I discovered that RAM is of approximately:

  Total physical memory: 2.048 MB
  Available physical memory: 1.32 GB

  Total virtual memory: 2 GB
  Total available memory: 1.96 GB

  As this screen shot in Arabic shows:

  

  I don't really know what mean these four memories.

  It would be very much appreciated

  Physical memory is actual RAM that is installed inyour PC is fast enough with respect to access to the data

  Virtual memory is not physical in terms that you can't touch it or remomve it. Vitutal is a section of hard disk space unused which is used on-site for faster physical memory that your PC does not have memory.

  Because the hard drive is slower interms of access data to physical memory, your PC will see improved performance by adding or replacing existing physical memory with amounts more or more (512 MB or more)

  Virtual memory allows your computer to always run, but at a slower speed when you run applications that have used all of the physical memory. Remember, even before starting a program already running the operating system and other services which each allocate a block of physical memory for themselves. You can see exactly how much is used by pressing CTRL-ALT-DEL and display of the process tab and the performance tab.

  You can easily determine what your need to add to your PC memory by visiting a site like Crucial.com which allows you to scan your pc for the type of memory used.

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost! The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost!

  The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  See below for my disk utility:

  

  

  Hello waynetay,

  Thank you for being part of the community of Apple!

  Looks like you want to recover the hard disk space that has been used by Bootcamp.  I know how critical disk hard space is, as I understand it want to access it.

  The Boot Camp Assistant should have added space on the side of Mac OS X from the hard drive when it has been used to remove Windows.  Since that didn't happen, you need to back up the system, and then erase the hard drive, then restore the backup.

  First, back up the computer.  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Once you have the backup, you must erase the drive and then restore the backup Time Machine.

  You can use these measures to erase files on your startup drive and install a fresh copy of OS X:

  1. Before you begin, make sure that your Mac is connected to the Internet.
  2. Restart your Mac. Immediately hold down the command (⌘) keys and R after having heard the startup sound to boot into OS X Recovery.
  3. When the recovery window, select disk utility, then click on continue.
  4. Select the volume name back from your startup disk in the left side of the disk utility window, then click Delete.
  5. If you want to erase the disc safely, click Security Options. Select an erasing method, and then click OK.
  6. On the Format menu, choose Mac OS extended (journaled). Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.
  8. If you are not connected to the Internet, select a network in the Wi-Fi menu.
  9. Select the option to reinstall OS X.
  10. Click on continue and follow the instructions on the screen to reinstall OS X.

  Once OS X installation is complete, you should have the option to restore from a backup Time Machine in the first installation of OS X.  Choose this option, and the computer will restore everything that was on it before it has been removed.  More information can be found here:

  How to reinstall OS X on your Mac

  Have a great day!

• Limited to the version of the operating system

  Is there a restriction on the version of the operating system that I can update my iPad to old mothers of?  In iTunes, it says that there is no update.  It's on iOS 5.1.1 but when I try to install a game to her, it says that I need at least version 7.1.  I guess the age of the iPad, MB292LL model, he can't possibly run the latest version of the operating system.  Please tell me I'm wrong.

  If she maxed out at 5.1.1 so this is a first generation iPad and Yes, unfortunately it can no longer be improved. Later this year when iOS10 comes out there will be additional models that can not be upgraded from 9 to 10.

  What you can try, never sync you your iPad to iTunes? If you try to download that game via iTunes if there is a version of the application remains compatible with 5.1.1 then who should download on iTunes and then you can sync it on the iPad.

  If they are not then you may just be stuck. The model of the iPad 1 is 5 years old, unfortunately, unless the users already have apps on it can be difficult to find a compatible more

• Need bios and firmware for the HP system

  I have an older HP Pavilion Elite e9280t - product # AW020AV-ABA.

  It runs an Intel Core i7 CPU 920 @ 2.67 GHz, with a map of TRUCKLEE 1.04E01 system.

  System BIOS is 5.24

  Given that HP is no longer support these older systems, does anyone know where I might be able to locate the last good firmware and updated the BIOS.

  Thanks in advance.

  @fridaythemovie

  Card BIOS update mother IPMTB-TK improves support for Intel Core i7-980 X Extreme Edition processors system and solves the problem with the suspension system when you enter in the mode 'sleep'. "Version 5.29.

  http://ftp.HP.com/pub/softlib/software12/COL35997/PV-88834-1/sp49903.exe

  Your other drivers here.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-elite-E9000-desktop-PC-series/3999455/model/4066664

  REO

• 2008 imac last version of the operating system available

  I have a 2008 currently under Snow Leopard 10.6.8 Imac.  Trouble with Google docs and I have heard that it's because of my version of the OS.  I was wondering what version of the OS, I would need to go?  or am I stuck to this version?

  My current system settings are as follows:

  Model name: iMac

  Model identifier: iMac5, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 2.16 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 4 MB

  Memory: 2 GB

  Bus speed: 667 MHz

  Boot ROM version: IM51.0090.B09

  Version of the SCM (System): 1.9f4

  Serial number (System): PS * WRX

  Material UUID: *.

  It's a 2006 iMac, not a 2008 a. He can't be updated past 10.7.5; you're probably better off circuit to software as Firefox instead of upgrading its operating system.

  (137965)