In Acrobat help on multiple devices

Similar Questions

• How to synchronize multiple devices (294 x) Rio usrp

  Hello

  I'm trying to receive 4 channels using two devices USRP-294xR (USRP RIO) to synchronously and run the example for the reception of several device program.   Often, I receive the error message "failed synchronization.  If I run the example several times in a row, this error message occurs more often than otherwise, but for all the times that he does not, I am able to collect data that seems like synchronous through the channels of reception.  So, in a way that works for me, but with the annoying feature that I need to run the program several times now until I am able to avoid the "Synchronization failed" error

  My installation includes an Octoclock connected to the Ref connections in and PPS in the two USRPs.  In the example, VI, I selected Ref in, but it is clear to me what choice should I use for relaxation.  Possible options are: 'Software', 'Immédiate', "Digital Edge", "Rx Start Trigger" and "Tx Start Trigger.  I had assumed my previous experience using these devices with the FPGA Ettus I would choose an option indicating that I tried to synchronize the external signal of PPS.  "External PPS" is not among the options of trigger, I'm confused as to how the synchronization.

  I saw the article below, but it's not not clear for me if I should be able to achieve my goal without making changes FPGA. It is possible to synchronize multiple devices using the program by default FPGA and example (i.e., for example RIO, not the host screw using the Ettus FPGA image)?  If so, any suggestions to help me avoid this error "synchronization failed"?

  http://zone.NI.com/reference/en-XX/help/373380D-01/usrphelp/synchronization/

  Thank you.

  Rob

  rkossler1 wrote:

  Since we did not have a 6674 t, I thought I might as well try to connect PPS from a RIO USRP to PPS on the two RIOs USRP.  I just used a BNC - T to "distribute" the relaxation.  It did not work - maybe for the same reason you mentioned on the PPS USRP out is not strong enough for the Octoclock by car.

  Yep, that's exactly it. The USRP RIO is not output enough power on the PPS TRIG OUT line to drive the lines of PPS TRIG IN two USRP RIOs, unfortunately

  rkossler1 wrote:

  How can I know which USRP RIO is the 'master '?  Do I need to designate in the software?  I chose arbitrarily use the device for which I have connected the PPS on the BNC - t 'RIO0', but I don't know how the SW knows what USRP I chose to connect the power cord to.

  The USRP captain's exit a PPS TRIG OUT in PPS TRIG IN sound. then all the USRPs you set this unit as the * first * device in the table of features of RIO for the façade of synchronization with a cross screw.

• How do the DAQmx sync with multiple devices

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (device). I tried to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. AI des_v2_Multi-Funtion_Synch - AO.vi is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much.

  Sincerely,

  Jie

  You have a cable RTSI connecting PCIe cards? In order for them at the time of sharing and triggers, you must install a RTSI cable like the one below.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/12631

  What are the exact synchronization requirements you need for your tasks?

• DAQmx several channels of multiple devices

  Hello

  General question here. If I use two devices that are exactly the same, what I can and if I use DAQmx task to read the analog inputs alone? Or is it better to use a task for each device?

  Thank you

  Hello

  Actually does not have a single task to read from multiple devices.  You will get the error 200558.  You must create a separate task for each device.

  Hope that helps!

  d

• best practices for the structure of the code control multiple devices in a sequence-step 2

  I have a question about code architecture and to get multiple devices controlled and synchronized for an experience. It is an 'architecture' - type application, so I hope for some suggestions on how to proceed.

  I run an experience in which I order 2 NI PCI-6733. I will soon add a Tektronix AFG 3022 B and have long been turned off the opportunity to rewrite my code labview from the ground upward. I inherited from a previous search, and although functional, I want to make it easier to modify and divide into sub - VI and these. Link to the current program (labview 8.6.1) is here if you do not want to see the code that is currently used and Subvi is in a zip file. The current version of experience consists of one stage, all writing the data for PCI cards is saved for the end. I need to change that in my configuration again well.

  The new experience consists of 2 steps. The first will take place (loop an array of output for PCI cards) until he heard a 'real' another computer (connected via TCP). When you do that, it should go to step 2 and run a sequence (usually 10 ^ 5 timeunits of length, where the unit of time is 0.1 ms) which refers to two PCI, the AFG 3022 B cards and with the flexibility to add more devices in the future.

  The most popular would be structural advice. How to organize the screw, if it's good to use a VI 'master' that would control the two sub - VI phase 1 and 2, etc...  Feel free to ask for more details if it helps clarify my question. Thank you!

  Such programs typically use a kind of State machine.  You will find many tutorials on LabVIEW state machines in these forums or forums of LAVA.  If you do a rewrite, I also recommend that consider you the LabVIEW classes.  They help modularize your code and do more reusable subparts.  You can end up with less to maintain, accordingly.

  You can also consider TestStand.  It was designed to perform sequences of tests, so can make your life easier.  It would be also exaggerated gross.

  Let us know if you encounter any problems with the machinery of State or classes.

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• How can I actually talk to support multiple issues with multiple devices (software, hardware, account of the question?

  How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.

  My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...

  All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.

  All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.

  Hello

  
  To correct the software issues run the methods mentioned below.
   
  Method 1: run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  
  Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
  http://support.Microsoft.com/kb/929833
  
  Method 3 : run Clean boot and check if the problem persists.

  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  To solve the problems related to Windows Live and MSN to check the links below on contact.

  
  After the question in the links below
  http://support.Microsoft.com/kb/940784
  http://windowslivehelp.com/
   
  To solve the problems related to the HP touch computer
  
  Update the HP touch drivers from the manufacturers Web site.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539

  
  Hope that helps.

• Download Illustrator to multiple devices

  Hello, do anyone know how I can install Illustrator on more than one device?  I bought Illustrator yesterday and that you downloaded it on my Windows PC, but now I also want to use it on my laptop. Customer service person told me before that I bought it I was able to install it on my PC and my laptop but I don't know how to do as previously, I tried to install it on multiple devices, but have been blocked to do. Any tips?  Thanks in advance.  Nicky

  Cloud license allows 2 activations to time http://www.adobe.com/legal/licenses-terms.html

  -pdf of 200 http://www.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-20150601_2.

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

• installation of creative cloud on multiple devices

  Can I install my subscription creative cloud on multiple devices?      Desktop for example, computer laptop and Ipad?

  Yes, 2 computers more mobile

  Cloud license allows 2 activations to time http://www.adobe.com/legal/licenses-terms.html

  -pdf of 200 http://www.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-20150601_2.

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

• I use lightroom on my laptop, and now I want to download on my desktop that I have multiple devices to the original purchase.  How can I download it for my office?

  I use lightroom on my laptop, and now I want to download on my desktop that I have multiple devices to the original purchase.  How can I download it for my office?

  You install programs exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Subscription to multiple devices

  My urgent subscription is usable on multiple devices? If so, then how do I get that? My tablet is not the active features as does my phone.

  Hi Edward,.

  If you already have a subscription under your Adobe ID, you can use it to activate Adobe CC app on 2 machines.

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• How to enable the use of multiple devices of cuda in Adobe AE?

  I had nvidia gtx 690 and nvidia gtx 760. They were both considered by the pilot 340.52 and we tick "use multiple GPU devices." Adobe AE CC 2014 so rendered was recognizing and using the two GPU devices. Then I replaced the gtx 690 with gtx 780Ti as a primary device. The driver does not have the option to use multiple devices and gpu in the AE preferences only the ti 780 is displayed.   When the don't return that this graphic card works. My question is how to use ti 760 & 780 two GPU in the rendering, as was the case with gtx 760 & 690?

  Thanks a lot for your help.

  Read the paragraph that begins with "If you have several installed GPU, GPU acceleration traced the beam 3D renderer will use the CUDA cores on each of them, as long as they are of the same level of CUDA computation" here:

  Features GPU (CUDA, OpenGL) in After Effects

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.

  Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.   Anyone who has similar problems and no one knows if there is a resolution?

  Thank you

  Johanine

  I hope that they address it quickly.  It is painful to have discovered my renowned PDFs are to difficult to identify file names their given by their authors.

• How can I set contact ringtone purchased on multiple devices?

  I have a few iPhones: 5, 6, and 6... How can I set ringtone touch purchased on iTunes Store on multiple devices?

  Because you can not download again for free, you will have to try to sync them with your devices, see this article:

  Download your purchases past - Apple Support