In any case to allow ray-tracing with AMD Fire500?
Hey everybody,
On a new MacPro and can't understand this. I thought I would just check the non supported cards little 'activate' box in preview options, then at least be able to see the projects that have used the ray-tracing... But that the box is grayed out, the map is completely unsupported?
It was perhaps too naïve to assume that newer Macs would be delivered with compatible cards AE, but what on earth do I do now? If I need to open and work with prior to traced to the RADIUS project that I have to use my old system?
Is there a solution?
Thank you!
Maria
Acceleration hardware path ray made in AE is ONLY possible with Nvidea GPU. Cards in the Mac Pro AMD should not always be supported by Adobe for this feature.
More information, you may like to read this recent thread:
http://forums.Adobe.com/thread/1421930?TSTART=30
Tags: After Effects
Similar Questions
-
In any case to the RAW LUN with VCB support?
Hi all
I know that when you have a unit number logic RAW mapping for a virtual disk that you can take snapshots in ESX or take the snap shots with VCB however is anyway to take a level backup image to a virtual machine that has a RAW LUN with VCB mapping?
Hello
If you convert the RAW LUN to a virtual RDM then yes VCB would work, but only for Virtual RDMs in addition to standard VMDK.
Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.dabcc.com/channel.aspx?id=279DABCC analyst [url]
"Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url] -
in any case to allow drag and drop on the BACK window?
How to enable drag and drop on the BACK window?
THXHi fs - ab,
You can use 3rd party tools that replace or enhance the Explorer.
FileMenu Tools - free - adds many functions
http://www.LopeSoft.com/en/fmtools/info.htmlI hope this helps.
-
In any case, to use transform activity with a loop for storage of the iterative purpose?
Hi all
I have a question about the processing activity. As I am new to BCI, I want to learn more about the processing activity. If we use a transformation inside a loop activity, all other records other than the last ones will be overwritten. I want to avoid this situation and s output
Scenario of
-------------------------------
(1) inside a loop for, I keep a DB adapter that will choose 1 row of table. So in each loop iteration for, we will get a line.
(2) in the same loop, we maintain another DB adapter which will retrieve multiple records.
(3) these values, I need to map it to an output variable (output xsd is able to contain multiple records) in the following order.
< 1Adaptateur out >
< data1 > < / data1 >
< data2 > < / data2 >
< 2 adapter output >
< data > < / data >
< data > < / data >
< / 2 adapter output >
for example)
< Person > - 1 adapter Db I st iteration
< name > xx < / name >
< 23 > < / Age >
< address > - 2nd iteration of st adapter 1 DB
home address < address > < / address >
address of the < address > < / address >
permanent address < address > < / address >
< address >
< / person >
< Person > - 1 adapter Db iteration nd II
yy < name > < / name >
< 23 > < / Age >
< address > - 2nd iteration of st adapter 1 DB
home address < address > < / address >
address of the < address > < / address >
permanent address < address > < / address >
< / book >
< / person >
How can I pass the data that we have read from the db adapter in the above format
Pls suggest a solution for this.
Published by: user_ds on June 15, 2011 02:38
Published by: user_ds on June 15, 2011 02:47HI'.
1.) initialize a new variable 'counter' of type int, and assign inside initialize counter = 1
2.) put the card1 DB and DB map2 invoke the of inside a while loop, then put it
condition (that you want to use) for the number of times you want to hit the DB again and again
3.) use affect the activity and inside this use Add and put the [$counter] on the expression of xsl to map to the next node
4.) now use a beneficiary within an Assign activity where increment you counter + 1Yatan-
-
Ray-tracing on GPU disabled on MacBook Pro with a graphics card double
Hi all,
I just installed the demo version of scars on my new macbook pro 15 ".
He has these 2 graphics cards:- Intel Pro Iris graphics card
- NVIDIA GeForce GT 750M
2 GB of GDDR5 memory
But when I opened After effects CC I get this error:
Ray-tracing on GPUS requires a map dgraphic approved NVIDIA and CUDA 5.0 or higher. At the moment the ray-tracing will use just the CPU.
On NVIDIA, I saw that mine is a CUDA GPU: https://developer.nvidia.com/CUDA-GPUs .
Why I get this error?Thank you
> However, I can install driver CUDA 5.0 + with GT750M and use ray-tracing with GPU on AE (OSX)?
You can use it, but it was not tested and not supported. You use it at your own risk, with the caveats explained here:
-
Why Ray-Tracing is disabled?
Hi, I have a NVIDIA GeForce GT 1024Mo of 650 M. In after effects THAT GPU CC is disabled, so my question is that my graphics card is too old or simply not supported by adobe. If this is the case, how can I activate my graphics card to allow ray-tracing?
Thank you very much
Eduard
NVIDIA GeForce GT 650M
According to the system requirements, this card is approved for the acceleration of the converter drawn with RADIUS: system requirements | After Effects
Please make sure that you have the current driver of CUDA. Also, Macs are set up to make 'smart' actual switching between graphics from Intel and your GPU. You must ensure that your GPU is the only thing used and it does not move to the Intel graphics card. It's in your control panel somewhere.
What version of Yosemite? Make sure that you have updated to the latest. Apple has fixed a few bugs that hit After Effects in their last update.
That being said, the ray-traced rendering engine is considered as an obsolete feature. The After Effects team is it evolves any more. If I were you, I'd put my efforts in becoming familiar with C4D Lite and the Cineware effect. This is where the AE team is to put their development time and is more powerful than the raytraced render engine.
-
ASA - Tunnel all traffic, allow rays to communicate with each other
Well, I hope someone can help me with this headache! Switching to employ a PIX and VPN 3005 concentrator Office at home in an ASA5510 for firewall and IPSEC tunnels. It is pretty much a
- VPN on a stick, multiple rays.
- All traffic sent by tunnel
- Internet access through main office (using the web filter) of
- VOIP to VOIP between rays
- All departments are using the clients VPN 3005 HW or ASA 5505 s
HEADQUARTERS: 10.0.0.0/24
Speaks 1: 192.168.11.0 / 24
Speaks 2: 192.168.12.0 / 24
Speaks 3: 192.168.13.0 / 24
-continues to 192.168.31.0 / 24
Spoke with the current configuration, 1 can communicate with all the resources in the home, office and Internet integrated properly checked by a tracert. However, the rays cannot communicate with each other. This is required for VOIP traffic, when all TALK TALK calls are made (sites).
Logging information when talk of talks initiated icmp:
- No group of translation found for icmp src, dst outside: 192.168.31.1 inside: 192.168.11.1 (type 8, code 0)
If I remove the nat (outside) 1 192.168.0.0 255.255.00 - rays will begin to respond to each other, but then the rays cannot tunnel through the Home Office Internet traffic. My brain is so scrambled after the cramming of VPN configurations for these days, so I hope someone has an idea. I've always used concentrators 3005, so it's a little different! In the search for documentation for this configuration, I was surprised that this isn't a most common topology. It seems that this article would (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml), but there is no rays! In any case, I'm sure this has something to do with NAT rules and perhaps who need access for traffic list speaks of talking.
=============================================
ASA Version 8.2 (1)
!
hostname asa5510interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP address 97.65.x.x 255.255.255.224interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.0.0.40 255.255.0.0permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the DM_INLINE_NETWORK_1 object-group network
object-network 10.0.0.0 255.255.0.0object-network 192.168.0.0 255.255.0.0
access-list sheep extended ip 10.0.0.0 allow 255.255.0.0 192.168.0.0 255.255.0.0
Allow Access-list extended wccp servers ip host 10.0.0.83 a
Redirect traffic extended access-list deny ip any object-group DM_INLINE_NETWORK_1
Redirect traffic scope permitted any one ip access-list
Global 1 interface (outside)
NAT (outside) 1 192.168.0.0 255.255.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.0.0.0 255.255.0.0Route outside 0.0.0.0 0.0.0.0 97.65.x.x 1
Route inside 192.168.0.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.2.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.3.0 255.255.255.0 10.0.0.1 1Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outdoorsCrypto-map dynamic dynmap 1 transform-set RIGHT
map mymap 65535-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400crypto ISAKMP ipsec-over-tcp port 10000
management-access inside
a basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interceptionWCCP web cache redirect-list Redirect-traffic group-list password xxxxxxx wccp-servers
WCCP 90 redirect-list traffic Redirect wccp servers group-list password xxxxxxxWebVPN
internal MJHIvpn group strategy
attributes of Group Policy MJHIvpn
value of server WINS 10.0.10.1 10.0.10.2
value of 10.0.10.1 DNS server 10.0.10.2
allow password-storage
Split-tunnel-policy tunnelall
mjhi.local value by default-field
allow to NEMusername field-3002 SjfS1Pq2xZGxHicx encrypted password
attributes of username field-3002
VPN-access-hour no
VPN - 250 simultaneous connections
VPN-idle-timeout no
VPN-session-timeout no
Protocol-tunnel-VPN IPSec
allow password-storage
type of remote access serviceremote access to field tunnel-group type
General-field tunnel-group attributes
Group Policy - by default-MJHIvpnIPSec-attributes of tunnel-group field
pre-shared-key *.class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the they
inspect the icmp
!
global service-policy global_policyHello Ala,
In Act got to be with the Nat configuration.
So basically you want to tunnel the traffic on the rays to communicate with each other.
OK, it would be with a nat 0 with the access list with the corresponding traffic outside.
Also on the crypto ACL for each site configuration, you must add an entry for the traffic of other offices.
I hope that I have explained myself.
Have a good
Julio
Note all useful posts!
-
What is the situation with the mac pro users and map of cuda for ray-tracing work?
What is the situation with the mac pro users and map of cuda for ray-tracing work? If it is not necessary or should I try to install a?
CUDA acceleration is no longer under development, and I've only played with traced to the RADIUS on a few test projects. If I need 3D dimensions objects I used C4D Lite, which is now included in EI
-
Complicated simple question - ray tracing
Hello
I'm working currently on a project - I have an optical system (some prisms, some lenses etc) and I want to do a VI to calculate the propagation of a ray of light - something like ray tracing.
I know that labview is not a perfect platform to address this issue, but I still want to try.
My problem is as follows: I want to calculate the propagation of a ray through a lens. I skate with some coordinates (y = const) and a lens plano convex - forward of a lens is a piece of a sphere. To calculate the spread (using snell's law), I find an angle between the RADIUS and the line that is tangent to this sphere lens to the point where my light beam hits the lens.
My procedure (on the piece of paper):
1.i know the coordinates of the center of a sphere (take (0,0)) and its radius r (x ^ 2 + y ^ 2 = r ^ 2). I know that the value of y = y_0 including the ray enters the goal.
so I can calculate the x_0: x_0 ^ y_0 2 + ^ 2 = r ^ 2. Now, I know the point where the light enters the lens (x_0, y_0)
2. then comes the usual procedure to find the equation of a tangent line to the sphere (y = a * x + b):
I updated y_0 and x_0 this equation:
Y_0 = a * x_0 + b
and I can't remove an unknown value (e.g. b): y = a *(x-y_0) + x_0
3. then I put this assimilation into the equation of the sphere (x ^ 2 + y ^ 2 = r ^ 2) and it's the quadratic equation that have an unknown value x and only one free parameter: a.
4 beacause I want to have the tangent line, so there should be a single good with sphere - so the quadratic equation should have determinant equal to zero (the only solution for x). It gives me an equation for one. I should find the value of a that satisfies this equation and then I know this tangent line and I have the solution! UF...
Unfortunately I still have not found a solution to implement this in labview (and I'm motivated because most of the work of this project is already done). I tried with the formula of analysis and so on, but I could not.
I will be really grateful for any advice or help!
Helmik,
LabVIEW does not symbolic math. Once you have the equations solved on paper or reduced to a set that can be solved numerically, so you can program in LV
When I look at your math in the first post, I see that (3) you describe an equation in x and a. However, this is not an order quadratic equation, but a fourth polynomial with terms like a ^ 2 * x ^ 2-2 * a ^ 2 * x * y_0. If this is not so easily resolved.
Isn't the tangent to the sphere perpendicular to the RADIUS at that time? The angle of the beam can be calculated from x_0, y_0 and the center of the sphere. Then add 90 degrees. An arc tangent and no complicated equations.
Lynn
-
Enable GPU and Nvidia Geforce 730 Ray tracing
Bought this gpu (2 GB DDR5 Vram) of MSI GeForce N730K-2GD5LP/OCV1 (MSI Global).
Put in touch with the adobe wish form support center but don't have no answer yet!
Before you buy this card, I searched a lot and found somewhere on the system requirements for after effects CC 2014. It says any Nvidia Geforce 6 * 7 * supports after effects CC 2014.
Now, here, I've not seen any post is linked with the card Nvidia GT 730 or found it in the condition list!
I need to know if this card supports or not?
What should I do now?
Help me as soon as possible...
First of all, why do you want to use the ray-traced rendering engine? It is considered to be obsolete. It was a crappy way to do 3d in After Effects. And, if you do not use it to create the geometry of 3d in AE, it slowed just all way down.
If you want to do 3d in AE work, use the new and more powerful 3d solution that comes with AE or use a third-party plugin like 3-d element Zaxwerks Invigorator, courage, etc. - GPU needs ShapeShifter have nothing to do with the requirements of the renderer traced to the RADIUS. I'm sure that all three of them can use your GPU, but check the requirements before you buy anything.
Now, if you want to continue to use the old ray-traced rendering engine, this is the page with the requirements for the ray-traced rendering engine: after effects configuration required for Mac OS and Windows
Nowhere does N cards or GT (except one: GT 650 M). All cards are cards GTX or Quadro. Now, in AE CC 2014 and versions later, you can check the box to use unsupported cards in order to expedite the ray-traced rendering engine, so you can try it.
-
Unable to choose "Ray Traced 3D"
Hi all
I have been looking around on these forums for an answer, but could not find.
I have a logo, Illustrator, which I've converted to vectors. I press the icon to activate 3D and in top right in my composition Viewer I see 'Classic 3D. " I click on it, and I don't have the option of choosing Ray Traced 3D.
I did some tests with a layer of simple text in a new composition in different fonts, I just never see the option 'Ray Traced 3D. "
Any ideas how I can solve my problem?
Thanks in advance!
Jordy Valentine
Consider reinstalling after you run the Creative Suite cleanup tool. Check your file permissions. I have the impression that the Picasso plugin is not loaded correctly at startup because of something to do here...
Mylenium
-
When I visit Gmail using Firefox version 8.0 (running w7) I get this message: "important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "
When I click "Try Standard Version Anyway" it works, but for some reason, Gmail is say that Firefox 8.0 is not a modern browser. Also, whenever I visit Gmail, he returned to the basic HTML version... ba.
It seems that Google is trying to make you switch to Chrome. I would stick with Firefox, but Gmail is an important part of my browsing...
I found the solution... browsing around, I found this link:
http://www.Google.sh/support/forum/p/Gmail/thread?TID=627898d83a02180f & hl = in
In type of Firefox:
Subject: config
Filter the results with:
"general.useragent.
All fields that are "BOLD" must be reset to ZERO. Do a RIGHT CLICK and RESET each field "BOLD".
Worked on my w7 machine!
-
My folders disappeared when 10.6.8 OS10.11.3. In any case, to get this stuff back in folders rather than a long list of files?
Where they disappeared?
Some changes that may be what you watch:
- All of my files - this is the search folder that searches all your files in your home and presents them in one place. They were not moved, they are displayed just like they are.
- Framed by default - the sidebar returns the values by default for all folders that you placed there will need to be added again.
Your files are stored inside your folder into subfolders such as Documents, movies, pictures, etc. They are all should still be there. You can add one of these folders to the sidebar by dragging them there, or you can use the tab of the sidebar in the Finder preferences.
You can access your file in the Finder with cmd-shift-h (menu go).
-
Look at the torrent of Blu - ray 3D with Lenovo T430
I have a 3D projector and a 3D compatible receiver in my home theater room. I recently bought a Lenovo T430 and I was wondering if it is possible to watch downloaded torrents movie in 3D with this laptop.
I understand that I need a mini displayport--> HDMI cable to connect the laptop on the receiver. I also understand that these torrent files play with something like the MKV player side-by-side format.
I don't know if I buy this adapter, 3D files will be able to play 3D through my setup of theater? Looks like a situation of "why not?", but I'm not too tech savvy and don't know if I'm missing something.
No discussion of piracy here. in any case, mini-Display port to HDMI is sufficient. Just wear you glasses to remove 2 images shown on television
-
I won't be here but Microsoft seems very happy sending me on the prosecution of the wild goose, and here I landed! I didn't even know that Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center. The first, in the Windows help sent me to http://windows.microsoft.com/en-us/windows/support#1TC=windows-7. Not a mention of the word "compatibility" on the page anywhere. Then, enter 'compatibility' in the search for support and here is the result, looks promising. https://www.microsoft.com/en-us/search/result.aspx?q=compatibility. But no, I click on the first result that says Microsoft compatibility Center. Even what seems to be the correct web address, microsoft.com /compatibility and it takes me here http://www.microsoft.com/microsoft-band/en-us/support/hardware/microsoft-band-system-requirements. I give up!
Hi André,.
Please keep us updated.
Unfortunately, the center of compatibility Windows has actually retired. To find out if any program that works with Windows 10 or not, you can check with the developer to program on the compatibility of its operating system. In addition, when you migrate to Windows 10 from a previous version of Windows, you are informed about programs that may not work with Windows 10. However, you can try to install these programs in compatibility mode and check.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Maybe you are looking for
-
2SV v. 2FA for Auto unlock with Apple Watch
Try to set up the auto unlock with Apple Watch on my MacBook Air (fall 2013) after the installation of Sierra. Get this message: Off the 2SV using applied.apple.com ... and still get the same message "2FA is required" box "Security & Privacy". What I
-
I downloaded Windows XP from the Windows Service Center. It's a .exe. When I click on it, it is extracted to a folder I called "xp". How can I obtain these data on a disk to install XP from a CD? Should what steps I take? I am running Windows 7. orig
-
Slot machine games does not roll correctly
Help... SLOT MACHINES DON'T ROLL! Facebook and outside, I'm playing the slot machine games and they roll properly... or they just roll. Everything about the game works very well except that... can someone please help I'm so BORED! Thank you, Cheryl
-
Box windows live mail do not forget to type in email addresses
I want to use Outlook when you type the email address it rememebers it automatically. So far, I have in fact add the address as a contact every time?
-
Problem syncing blackBerry Smartphone Outlook
After working perfectly last week, my curve fails to sync with Outlook Calendar - I get a notice of 'Unknown error' and close Blackberry Desktop Manager. A software change, it's that I have newly installed Outlook Small Business Contact Manager. Can