In any case to select and distribute the layer MASK?

Similar Questions

• Changes to the selection without affecting the layer mask

  Hello

  I've hidden an image selection using the lasso tool. Added an adjustment layer (exhibition) and reduced the exposure. And then refined at the edge. Any fine. I add the layer to selection, and then click change the mask with the lasso to add and subtract the mask tool. I change the setting - raise or lower the exposure - but only the previous selection is affected - even if the framing box clearly shows the changes made to the selection.

  I need to create a new layer of setting each time so that it can work properly.

  Is - this usual? I thought that one could just edit the mask and then changes are applied automatically?

  Thank you

  Jez

  When you have a selection and create an adjustment layer, selection is enabled in the mask, so there is no longer a choice. By clicking on add a new selection to the selection at this point to this fact and does not add to the mask. You must use this selection and add fill it with white, black or a shade of gray that will then be used to request that the amount of the correction of the adjustment layer. If you want two different settings with different selections, then you will need to make two different adjustment layers.

• Select and hide the query

  In Photoshop CC when I use select and hide the 'onion skin' filter does only rarely. Any suggestions as to why this could be?

  Works perfectly! I'm wondering now if I had the - ticked instead of +. Seems as if could be the answer and if it does not work in the future I'll check everything here first. Thanks for your time and your help.

• Can I change amortization and distribute the calendar in the window controls of book?

  Hi all
  
  I use the FA module.
  I tried to find it on the documentation, but I found it. I need to know if I can change the depreciation and distribute the calendar on the book controls window?
  If it is possible to change this information, please tell me how I can do this, or if there is any option to profile for this purpose.
  
  
  
  Thank you and best regards
  Ernest

  Impossible to change depreciation and distribute the calendar at the level of the book, in this way is not taken in charge and I think that a hard-coded update does not work.
  If you change these, you must put in place a new asset book and migrate existing data in this book

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to select and move the letters while playing 'Word with friends' through facebook

  Original title: play games

  During playback "words with friends" through face book... I can't select and move the letters on the touch screen without the screen, scrolling up and down.
  I need the touch screen to allow the movement of the letters c A C H, etc. on the game board without scrolling of the image of the screen!
  Several of my Face book games does not load completely without hanging... both Adobe Flash player and Windows are also perfectly up-to-date.
  Kind regards

  Hi Stephanie,

  Looks like you are unable to play words with friends on Facebook and also problems with other facebook games.
   
   
  Since you are faced with a design problem with the play on words with friends on facebook, I suggest you to contact the administrator of the game to get more information about the compatibility of the game in Windows RT. You can also ask if they provide latest app for the particular game.
  
  support.Zynga.com/Home/Words-with-friends
   
   
  I would also ask you to contact Facebook to get information about other games:
  http://www.Facebook.com/help/
   
   
   
  Hope this information helps.

• Paint with white in selection and hide the workspace

  Hello

  I'm in selection and hide the workspace > discovers black & white. When you use the Paintbrush tool, how to switch between painting with white and black?

  With the Brush tool selected paint just in the black and white view and this is equivalent to paint with white. Now the alt key or option is equivalent to paint with black.

  

• 4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

  4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

  He was connected/buggy. It is not fixed yet. But it will be.

• apply the layer mask selection

  Hello

  IAM looking for a solution to apply a previeuws

  choice of a layer of an adjustment layer mask.

  The gale of my code to select the mask - but when I apply the

  selection, it creates top layer.

  I need to go into the layer mask (alt and click) and then paste it.

  Then turns off.

  Scriptlistender is not helping much.

  
  app.activeDocument.selection.selectAll(); //selects stuff on the preview layer
  app.activeDocument.selection.copy();  //copy that stuff - to paste it into the mask later
  
  var adjLayer = doc.layerSets.getByName("ao").artLayers.getByName("ao");  //searching for a group and specific layer
  var mask = ExtendedLayer.selectLayerMask(adjLayer); // extern function wich selects the mask (does not go "into" the mask - just selects it)
  
  
  pastMask = function()
  {
  
  // Selectin recorded by Script listender
  var idslct = charIDToTypeID( "slct" );
      var desc321 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref212 = new ActionReference();
          var idChnl = charIDToTypeID( "Chnl" );
          var idChnl = charIDToTypeID( "Chnl" );
          var idMsk = charIDToTypeID( "Msk " );
          ref212.putEnumerated( idChnl, idChnl, idMsk );
      desc321.putReference( idnull, ref212 );
      var idMkVs = charIDToTypeID( "MkVs" );
      desc321.putBoolean( idMkVs, false );
  executeAction( idslct, desc321, DialogModes.NO );
  
  // paste, recorded by script listender
  var idpast = charIDToTypeID( "past" );
      var desc322 = new ActionDescriptor();
      var idAntA = charIDToTypeID( "AntA" );
      var idAnnt = charIDToTypeID( "Annt" );
      var idAnno = charIDToTypeID( "Anno" );
      desc322.putEnumerated( idAntA, idAnnt, idAnno );
  executeAction( idpast, desc322, DialogModes.NO );
  
  
  };
  pastMask();
  
  

  Any help would be really nice. !

  Thank you very much

  Alpha

  app.activeDocument.selection.selectAll (); selects on the preview layer stuff

  app.activeDocument.selection.copy ();  copy such things - to paste it later into the mask

  var adjLayer = activeDocument.layerSets.getByName("ao").artLayers.getByName ("ao");  looking for a group and a specific layer

  activeDocument.activeLayer = adjLayer;

  pastMask = function()

  {

  Selectin registered by the listender Script

  var idslct = charIDToTypeID ("TPCV");

  var desc321 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref212 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idMsk = charIDToTypeID ("Msk");

  ref212.putEnumerated (idChnl, idChnl, idMsk);

  desc321.putReference (idnull, ref212);

  var idMkVs = charIDToTypeID ("MKV");

  desc321.putBoolean (idMkVs, true);

  executeAction (idslct, desc321, DialogModes.NO);

  dough, recorded by the listender script

  var idpast = charIDToTypeID ("gone");

  var desc322 = new ActionDescriptor();

  var the idAntA = charIDToTypeID ("AntA");

  var idAnnt = charIDToTypeID ("Annt");

  var idAnno = charIDToTypeID ("year");

  desc322.putEnumerated (idAntA, idAnnt, idAnno);

  executeAction (idpast, desc322, DialogModes.NO);

  };

  pastMask();

• can not select or modify the layer in CS5.1 extended mask

  In our class, we have photoshop CS5 on Mac

  I started a class project, which involves the creation of a layer mask. I was about done with the mask, but brought home at the end I opened the file on my WIN XP works photoshop CS5.1 extended, which I installed this morning. In class, I was able to click on the mask to select, then use the brush to change the details, the white or black paint if necessary to refine the edge.

  When I put the original .psd file and opened in the new version of Photoshop, it doesn't allow me to select the mask for the edition. I selected the layer and then clicked on the thumbnail of the mask in the pallet layer but didn't see the contours of the corner, which usually appear when the thumbnail of the layer is selected. When I tried brushing up on what I thought, it was the mask (on the selected layer), I got the pink overlay as usually seen in the quick mask. (foreground and background are black and white colors).

  V5.1 behaves differently with masks of v5.0? I do not change the factory default settings and in the classroom, it is a common practice to restore the value by default when you start.

  any ideas?

  It is not supposed to be a difference in how Photoshop CS5.1 works compared to CS5.

  Normally, you click on the layer mask icon in the LAYERS Panel, you see the contour change, then paint you on the mask.

  If you don't see quick out frozen, what happens if you press Q, then clear any selection and click on the layer mask icon again?

  -Christmas

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.

• Script to add the layer mask to all layers but the background?

  I have been a professional editor/Retoucher for photographers for the past three years. I use a lot of stock, but I've never branched in scripts so far. I am trying to refine my workflow and scripts to not appear to be the next logical step.

  I do a lot of work in the interiors, which is essentially manual HDR. Here's my current generation process, which I would love to find a way to script. I tried to be very clear, but let me know if it needs to expand. I use Photoshop CS5.

  1. pull brackets, color corrected TIFF in Bridge.

  2 re-order as needed, with the main exhibition downstairs. Click on 'Tools' > 'Photoshop' > 'Charge in the form of layers Photoshop"to get a PSD with layers in the correct order and main as exposure layer from bottom (base).

  3. manually go through each layer and add a layer mask hide all each layer except the background layer.

  4. Save as a PSD, using the original name of the background layer as the file name. To do this, I just copy the name of the layer (example.tiff), paste in the Save dialog box and then use the drop-down menu to select PSD (save as example.psd).

  I hope to automate steps 3 and 4 as they are the majority of your time for me. Any contribution is appreciated!

  Thanks again.

  Yes, your change is good.  This way the last layer will not have a mask applied.  I wasn't sure if you wanted that, but in the control for the background layer.

  Regarding the economy, what file format would you save on?  Here's how to save a psd:

  docRef var = activeDocument

  var doneFolder = new Folder('/c/photos/')

  var NomCouche = docRef.activeLayer.name

  var psdOptions = new PhotoshopSaveOptions();

  psdOptions.layers = true;

  app.displayDialogs = DialogModes.ALL;//include this line if you want that the coming dialog box.

  docRef.saveAs (new file (doneFolder + "/" + NomCouche + ".psd"), psdOptions);

  app.displayDialogs = DialogModes.NO;//Resets at ALL - you won't let it work on.

• How to create the layer mask using ellipse (circle) to show the face of the watch only?

  just stuck - see how to get a job of layer mask using a brush, but can not get by with the help of an ellipse

  What I'm after is:

  * Start simple watch, with the face and band by photo

  * want to apply a layer, so the only thing I see the circular face of the watch (no tape etc.) and that the base is clear (alpha)

  May I ask what are the instructions step by step to achieve this goal by using layer masks & ellipse tool?  (i.e. not having to manually paint around the dial)

  Here's the original image:
  

  1. Make a copy of the background and work on this copy of background layer.
  2. Use the elliptical selection tool, hold down the SHIFT key to draw a circular selection:
     
  3. Select use (on the menu bar)... Transform the selection to move the selection, and drag the sides of the selection at the edges of the dial:
     
  4. After you click the green check mark, use the selection... Inverse to select all items except the dial of the watch and press your delete key to remove such things:
     
  5. Your layers look like this:
     

  Alternatively, if you want to use a mask, after step #3 hit the icon 'Mask' at the bottom of the Palette layers to create a mask layer automatically by using the selection:
  

  Ken

  Post edited by: photodrawken to add the alternative method of mask.

• White color on the layer mask does not

  Well, I have a problem... Each setting is fine, but when I open the layer mask on a layer, and if I have the black brush, it works very well, BUT if I brush white, it does not work. It's like the color white is on 0% opacity. It shows me an action in "history, but it's like I'm not even brushing."
  Now, when I want white brush, I switched layer mask, brush black and then I reverse again, because as I said, the white color just doesn't work...
  -Colours btw, work not in a layer mask

  Is the Mode in the Options bar to brush on something other than normal?

• Opacity of the layer mask Photoshop in AE

  I have a series of PSD files each with a layer mask with a default opacity of 100%. PS, I change the 'density' of the layer of about 15% in order to achieve the desired result. Either way, the layer mask is also an inactive Alpha channel.

  My question is that when I include the series of the PSD AE as-is, the layer mask is available as a black. It doesn't seem to be a way adjust the density of the mask as in Photoshop. I tried to use an alpha channel and track matte, but no luck. The main PSD file has the default active layer apparently mask with no way to change it.

  Maybe I'll have to put in place an action on PSD files?

  Thank you.

  

  AE is not layer masks as separate channels, it uses only the calculated pixel opacity. Simply, you cannot use this method. Rasterize your stuff to separate the layers.

  Mylenium