In order before loading the images

Similar Questions

• Random BSOD and I do not know why.__Unable to load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32

  I don't know why this is happening, but I'm getting random BSOD now and then. I tried to point out my system to see if it generates a BSOD, but multitasking 3d and photoshop programs and what's not stress, then when I least expect, BANG! BSOD.
  The last of them, that I had now was in the middle of the night with almost no programs running. The system had worked for some time (one or two days), but nothing was he pointing out at the same time.

  What I think happened was: our microwave shorted out and caused a fuse to blow. But it was on another grid in our House (I hope I make myself clear, because I'm not used to talk about stuff like this in English!) so it should not affect my computer. But at the same time my microwave said "Thank you for everything!" my computer would BSOD. The thing is that my modem, my switch, my router and my NAS is connected to the electric network and my short circuted of switch. And my computer is connected to the switch cable.
  This effect possible that excess tension (or something) has short circuted my switch and 'jumped' power to the switch and on the cable and sending there is a shock to my computer? Or am I just paranoid? Laughing out loud

  I know that the controllers are pushed to the limit of the memory and therefor tolerate very little when it comes to electricity. I ran MemTest4.00 14 passes but I came with nothing. But memtest that tests memory, not the controllers, right? I am watching a fried motherboard?

  I did a windb, but I don't understand what he says. Could someone please translate this for me and give me your opinion?
  In addition, when you run windb, it's tell me am I wrong symbols. -What this means, and where can I get the symbols he wants? And what symbols?

  Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\Mini042910-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  Computer name:
  Kernel base = 0xfffff800 '02c4c000 PsLoadedModuleList = 0xfffff800' 02e10dd0
  The debugging session: 23:43:16.368 Thursday, April 29, 2010 (UTC + 02:00)
  System Uptime: 3 days 5:21:50.657
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ................................................
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {fffffa7fffffffea, 2, 0, fffff80002c5a95c}

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  Probably caused by: ntoskrnl.exe (nt + e95c)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: fffffa7fffffffea, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80002c5a95c, address memory

  Debugging information:
  ------------------

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************

  ADDITIONAL_DEBUG_TEXT:
  Use '! findthebuild' command to search for the generation of target information.
  If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.

  MODULE_NAME: nt

  FAULTING_MODULE: fffff80002c4c000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 4b7d238f

  READ_ADDRESS: could not get nt! MmSpecialPoolStart
  Unable to get nt! MmSpecialPoolEnd
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  fffffa7fffffffea

  CURRENT_IRQL: 0

  FAULTING_IP:
  NT + e95c
  fffff800'02c5a95c?              ???

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  LAST_CONTROL_TRANSFER: from fffff80002ca626e to fffff80002ca64d0

  STACK_TEXT:
  fffffa60 '01bde688 fffff800' 02ca626e: 00000000' 0000000 a fffffa7f ' ffffffea 00000000'00000002 00000000'00000000: nt + 0x5a4d0
  fffffa60 '01bde690 00000000' 0000000-a: fffffa7f 'ffffffea 00000000'00000002 00000000'00000000 fffff800' 02c5a95c: nt + 0x5a26e
  fffffa60 '01bde698 fffffa7f' ffffffea: 00000000'00000002 00000000'00000000 fffff800 '02c5a95c fffffa60' 04dbf8b0: 0xa
  fffffa60 '01bde6a0 00000000' 00000002: 00000000 00000000' fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000' 00000000: 0xfffffa7f'ffffffea
  fffffa60'01bde6a8 00000000' 00000000: fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000'00000000 00000000'00000000: 0 x 2

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  NT + e95c
  fffff800'02c5a95c?              ???

  SYMBOL_NAME: nt + e95c

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntoskrnl.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner
  ---------

  I'm grateful for any help I can get in that case.

  My system is: AMD 9950BE CPU, motherboard ASUS Crosshair II Formula, 4 x 2 giga OCZ 1066 mhz memory, Vista Ultimate 64 bit, ASUS 295GTX GPU

  Postal salvation,

  I think you're in luck. It chances are you are one of those rare cases where the BSOD may not be hardware related. In addition, it is actually pretty rare to have so many errors after a sfc... Wow. I think that alone has helped reduce the risk of an another BSOD and was good insurance against other problems.

  Do you have a chance to check the hard drive? Now, I would like to check the hard drive to see if there may be potential damage to the hard drive as well to help explain this number of errors (return to the material again).

  Here's how to new:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  I think that advice on the anti-virus scanning are also actually still relevant today. I have a scan of one of the two groups below as soon as you can and let us know the result if you can.

  virus/malware programs:

  Symantec:

  Works in Safe Mode and free:

  _ http://security.symantec.com/sscv6/WelcomePage.asp

  Trend Micro

  _ http://housecall.trendmicro.com/

  Ad-ware/spyware:

  Ad-aware

  http://www.lavasoftusa.com/

  Spybot Search and Destroy

  http://www.safer-networking.org/

  * It is an excellent versatile tool as it will both spyware and malware and has also a small footprint.

  See you soon,.

  Steve <> Microsoft Partner

• load the image full screen in clip

  I load a video clip into an mc at certain times...

  Load video

  connection: NetConnection var = new NetConnection();

  var stream: NetStream;

  Video: video of var = new Video (stage.stageWidth, stage.stageHeight);

  var metaObj:Object = new Object();

  var isPaused:Boolean = true;

  Stream = new NetStream (connection);

  Stream.client = metaObj;

  metaObj.onMetaData = onMetaData;

  function onMetaData(data:Object):void {}

  video.attachNetStream (stream);

  Stream.Play (an "clip.flv");

  mc.addChild (video);

  MC. Width = stage.stageWidth;

  MC. Height = stage.stageHeight;

  ... and the loading of an image at other times...

  load the image

  var reqImage:URLRequest = new URLRequest ("image.jpg");

  var backLoader:Loader = new Loader();

  backLoader.load (reqImage);

  mc.addChild (backLoader);

  MC. Width = stage.stageWidth;

  MC. Height = stage.stageHeight;

  ... and also have a function of resizing on the mc...

  resize

  function resizeHandler(event:Event):void {}

  MC. Width = stage.stageWidth;

  MC. Height = stage.stageHeight;

  }

  this.stage.addEventListener (Event.RESIZE, resizeHandler);

  resizeHandler (null);

  ... The video full screen loads initially and when resizing because of my video var params (var video: Video = new Video (stage.stageWidth, stage.stageHeight).)   However, my image does not load full screen initially but not when resizing.  Is there some params I can get somewhere, to allow my image to load in full screen?  How can I fix?  Thanks in advance.

  Try this:

  var backLoader:Loader = new Loader();
  backLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onLoadComplete);
  backLoader.load(new URLRequest("image.jpg"));
  
  function onLoadComplete(e:Event):void {
       backLoader.width = stage.stageWidth;
       backLoader.height = stage.stageHeight;
       mc.addChild(backLoader);
  }
  

  Be aware however that the quality if the images with this resizing apprioach will suffer greatly. In order to preserve the quality, you should not use BitmapData resampling.

• Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Any ideas?

  davids62398138 wrote:

  Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Any ideas?

  It was reported many problems with older versions of PSE and WIN10.

  Can you open PSE from office or from the list of programs on the start menu?

• load the image on mouseover after that page is shown

  Hi guys, I have a slideshow with 30 images and he loading images until you see the page but there are quantity 6-7 seconds... is there a method to load only a thumbnail and display the page and when I click or mouse over the thumbnail dynamically load the image... I think it can be done to change the src of the image...

  I solved with this code

  ($(sym.lookupSelector ('container')) .css ("background-image', ' url(images/ALBUM_01/album1_20.jpg)');

• Load the image when she becomes visible?

  I have a number of itemrenderers in a list that contains images. I would like to only load the image that belong to the visible itemrenderers.

  I thought I saw this fact in another mobile flex projects, but I don't know how to do it.

  Does anyone know how to do this? It is built based on flex?

  See the documentation for the Image of the spark. It has an image caching features.

  http://help.Adobe.com/en_US/Flex/using/WSc5cd04c102ae3e97-33ad5caa12c719dc7c8-8000.html#ws c5cd04c102ae3e97-33ad5caa12c719dc7c8-7ffc

  In addition, by default, sets useVirtualLayout list = 'true '. This means that only the visible rendering engines will actually created.

• Loader will load the images from another server, but then we get error on Bitmap operation

  I develop an application that currently uses Loader to get the images to another server.  This should not work now because we are still waiting for the owner of that server to put a crossdomain in place file.  However, it works - sort of .

  Charger can load the images very well, without error.  But then the application has a feature that we are a great duplicate of the image to display in a sidebar, we do this in this way:

  var myBitmap:Bitmap = Bitmap (loader.content);

  and when will we get a Flash player 2122 security error, violation of sandbox.

  So although I hope that all this will fix itself when the crossdomain.xml file is set up, I am confused as to why we get only the sandbox error when we do a bitmap image, and not when we try to initially retrieve the image.

  (By the way: is there a better way to make a "copy" of an image loaded by a loader and change its width and height to display simultaneously in another part of the scene?)  "I have need to change its real dimensions - I just need to change its display width and height).

  Thank you!

  The sandbox allows you to view, not not editing from another server without a cross-domain.

  Therefore, when you try to load up, it loads, it 'read only' and gives you an error when you try to "change" by a new Bitmap out of it.

  This should resolve itself once crossdomain is in place.

  || EDIT |

  I just realized that I have to clarify my statement a bit more.

  When you load images from another server without a crossdomain, it only allows the load for display.  When you try to load data, it will fail.  It is because that data XML, or another type of data is editable by default, and the images are only visible by default.  As a result, the image fails when you try to convert it to an editable form.

• load the image

  Hello

  Please see this XML

  <? XML version = "1.0" encoding = "utf-8"? >
  < gallary >
  < iconUrl = "images/1.png icon" xpos = '150' ypos = "100" > < / icon > "
  < iconUrl = "images/2.png icon" xpos = ypos "190" = "150" > < / icon > "
  < / gallary >

  then ;

  I want to load by iconUrl in the xpos and ypos, with the following code

  var myXml:XML = new XML();
  myXml.ignoreWhite = true;
  myXml.load ("config.xml");
  myXml.onLoad = {function (success)}
  for (i = 0; i < = myXml.childNodes.length; i ++) {}
  charger = this.firstChild.childNodes [i].attributes.iconUrl;
  _root.createEmptyMovieClip ("al", 10);
  al.loadMovie (loader);
  al. _x = this.firstChild.childNodes [i].attributes.xpos;
  al. _y = this.firstChild.childNodes [i].attributes.ypos;
  }
  }

  This charge code fix the last iconUrl in the XML to a specific position, but the problem is, the other images is not supported or maybe unload because the name of the clip that would load the image is no different.

  My question is :

  What can rename the clip dynamically ?

  best regards .

  This should be:

  var myXml:XML = new XML();
  myXml.ignoreWhite = true;

  myXml.onLoad = {function (success)}
  for (i = 0; i<=myXml.childNodes.length; i++)="">
  Charger = this.firstChild.childNodes [i].attributes.iconUrl;
  var targetMC:MovieClip = _root.createEmptyMovieClip ("al" + i, 10 + i);
  targetMC.loadMovie (loader);

  targetMC._x = this.firstChild.childNodes [i].attributes.xpos;
  targetMC._y = this.firstChild.childNodes [i].attributes.ypos;

  }
  };

  myXml.load ("config.xml");

• Problem with loading the images

  Hello.
  I built an application that, among other things, load the images in thumbnails. The people demand changed photos repeatedly. Now they did once again, but despite what they have changed their old images still appear almost anything. I even deleted the cache and the old images still appear.
  
  Image loading code is exactly this one:
  thumb_mc.loadMovie("poze/thumb1.jpg");
  
  Unfortunetly I don't have access to the server so I can not check the corectitude of their work. So I ask is it possible to achieve something like this using this code? (there is no image in the .swf file, everything is active when running).
  
  Thank you.

  They've seen where hidden on the server.

• How to send the page before loading the page header?

  Hello
  
  Is it possible to send the page before loading the page header. Because I have a sql report in the homepage itself that needs to be exported to excel.when, loading the page, the page elements will be set to NULL in the session that causes the output export empty.
  
  Appreciate the help,
  IDEOGRAM

  Hello

  Use according to the calculations of the header for these items.
  It should work

  BR, Jari

• How to load the image into the Blob field in Sql?

  Hello
  
  I want to know how to load the image into the Blob field in Sql
  
  Concerning
  
  
  Therese

  Re: How to load the image into the Long Raw column?

• do not load the images

  On a server, I have some files in the main SWF loads SWF via loadMovie. But jpg loading in the main swf file by clicking on the small of sovereign wealth funds, does not load. Do not load the jpg. I use the same loadMovie. On my computer, locally it works. When I upload the site on the server the problem mentioned until occurs.
  
  Can someone help me?
  Thank you.

  I found the problem. The SWF file on the server is case-sensitive.
  I had the path indicated like this: loadMovie (' images/m1.jpg"); but the file was actually named "M1".
  Strange as it sounds the film plays well on my computer and the image was loading, but when I have downloaded the SWF file has not loaded the image because the image was called "M1" and my path was pointing to "M1".

• How can I determine the type of image to be used before loading an image?

  I'm developing an application using VB 2005 which measures two 8-bit or 16-bit image files. When I saw the picture, I find that I have to set the type of image the image buffer before playback of the image in it. For example, if I read a 16-bit image in a buffer of 8 bits, the image is truncated. I guess I could read the image in a 16-bit buffer and retype it if the pixel values are less than 255.

  Is there a better way to do it? Can I determine the number of bits of an image before loading in a buffer?

  Thank you!

  Hi Steverino,

  Olivia is incorrect... VDM has a function called GetFileInfo which does just what you want. It only reads the header of the image but does not load the entire image in memory. It will give you various properties such as the bit depth.

  I think that on the new .NET support, there can exist here: NationalInstruments.Vision.Analysis.Algorithms.GetFileInformation.

  Thanks to the ICB and our legacy of .NET support, it's probably a similar name.

  Eric

• Load the images in the slide show before ugly background color

  I'm doing a site based on a template Freeccs.  This particular model was chosen because my client wants a slideshow on each page, and it is one that is generated by javascript.

  The problem is the following: such as load images for the slideshow, a bright red background color fills the space where the images will be displayed on-screen.

  Can someone tell me how to change the red background to something less distracting, like a dark gray?  I guess that the javascript code sets the color, but I don't know javascript.

  Thanks in advance for any help you can give me.

  Richard

  Your background color for col1 is red...

• Load the image from jar

  Hello

  My images are in a file named images.jar.

  It s works well.

  But, if I need to load an image using READ_IMAGE_FILE,

  He does not judge.

  How can I load an image inside this pot in a part of the image?

  Thank you.

  I should had pressed before F1...

  READ_IMAGE_FILE ('image', 'URL', 'block.image_item') worked. Thank you.