In SQL Developer, is it possible to send the results of a sql statement?

In SQL Developer, is it possible to send the results of a sql statement?

Right-click on the query results pane, select "Export data" in the context menu, then select "xls".

Tags: Database

Similar Questions

  • The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

    The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

    Ok.  So you're screenshot compared to SCORM clouds now shows you're scoring 100% in the quiz, but your state of completion will still come out incomplete.  Then of course, your quiz notification settings not award success based on passing the test.

    Try to set your quiz the way I show this screenshot using SCORM 1.2 instead of 2004.

  • How to send the result of a function as an input to another function

    Hello

    I wrote a function wich return string. I want to send string returned as an input to another function. How can I integrate these two functions.

    Thank you...

    I want to send the result of the first function as input for another function

    It's what do all these examples.

    Do not get hung up on BOM - function1 and function2 - the one call it first (with or without argument) returns a value that is passed in a second and even, in my example, the output of the last second in a third (dbms_output).

    select function72727347(function9596943 (argument)) from dual

    Published by: Dom Brooks on February 18, 2011 12:08

  • How to check the possibility to send the PIN message?

    Hello

    Is it possible to verify that a device is able to send a PIN message without sending the message to the PIN and check its status? I cover all possible cases, such as devices with WIFI and without, company activated devices and is not active and etc., devices with antenna radio off the coast.

    Best regards.

    I think you need to BIS to send PIN messages.

    If this is the case, you can use CoverageInfo to check for this.

  • Purchase Adobe Acrobat Pro DC has the possibility to send the signatures?

    I did a 30 day trial of the product and knew that it would work so I ordered the product.  When I load on my computer and start working, it doesn't have the ability to send the signatures.  Why is this lack?

    Hi coc530,

    It's a subscription for Acrobat Pro DC or is a perpetual license?

    Subscription Pro DC Acrobat has send to the option of Signature electronic signature, electronic signatures online | Adobe Acrobat DC

    Kind regards

    Nicos

  • Send the results by email

    My colleague wants to know if there is a way to implement email report function Captivate quizzes so that e-mail will also indicate which course reports on e-mail. We use Captivate 3. In his own words:
    - - - - -
    I have five modules of separate courses that make up a class together. Each module contains a quiz. I use the feature to e-mail results so that the results are sent by e-mail to a person for the purpose of follow-up.

    Unfortunately, the results of email are generic and do not reference the names of five of the course modules. So the person who receives the e-mail will get five emails (one for each module) with "results: Date" in the line object and status, location, notes gross, Max, Min Score Score and time in the body.

    How can it be put in place so that the person who receives the results of email can easily know which module each e-mail is for?

    Here is an example of what gets the person email and he or she will not be able to tell where modules each e-mail is for.

    Topic: Results: 02/09/2009

    Results =
    Basic data
    'Status', 'Place', 'Raw score', 'Score Max', 'Score Min', 'time '.
    'impossible', '18' '20', "100', '0',"00:01:03 "

    - - - - -

    Thank you!

    Janatwork,

    Yes, it is possible. If you edit the HTM with Captivate, you can
    include the document.title or hardcode the course for electronic mail.

    For example, if you change the model for email for Captivate 3 HTM
    (there's usually: C:\Program Files\Adobe\Adobe Captivate)
    3\Templates\Publish\email_body.htm)

    You can change the "padMail" method such as:

    gstrEmailSubject = document.title + '-' + strSubject;

    I just published an article that * may * help to provide a better
    mechanism for sending e-mail messages via a script on the server side (if it of)
    your needs prise_en_charge / environments). It is published:
    http://www.ConnectUsers.com/tutorials/2009/02/proprietary_tracking/index.php.

    Who help me?

    Kind regards

    Andrew

  • Send the results of the script by email

    OK, time to reach out for a little help;

    I'm looking to receive a daily report or weekly at the time stated on all of my guests. I restored code (below), but at this point, I get an empty email for each host. The script runs and displays in the ok command window, but I want to receive an email, with the result declared all hosts. When executing this now, the command window reports 'Time on $host1 in the allowed range' if it is understood naturally, or offer lag.

    I have serached and tried various methods of the call to this function to send mail, but can someone take a look and recommend a better way?

    script:

    > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

    $allowedDifferenceSeconds = 20

    Notice-EEG - ViewType HostSystem-Property Name, ConfigManager.DateTimeSystem. %{
    datetime #get host system
    $dts = get-view $_. ConfigManager.DateTimeSystem

    time to host #get
    $t = $dts. QueryDateTime()

    #calculate time difference in seconds
    $s = ($t - [DateTime]: UtcNow). TotalSeconds

    #check so lag is too much
    {if ([Math]: ABS ($s) - gt $allowedDifferenceSeconds)}
    #print host difference and the time in seconds
    $row = "" | Select the host name, seconds
    $row. Hostname = $_. Name
    $row. Seconds = $s
    $row
    }
    else {}
    Write-Host "time on" $_. Name "to the bosom of the beach permit"

    $smtpSrv = "SMTP.domaine.com".
    $from = "[email protected]".
    $to = "[email protected]".
    $subject = "VM host time report.


    $msg = new-object Net.Mail.MailMessage ($from, $to, $subject, $body)

    $smtp = new-object Net.Mail.SMTPclient ($smtpSrv)

    $smtp.send ($msg)

    }

    > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

    Try something like this

    $allowedDifferenceSeconds = 20 $body = $null 

get-view -ViewType HostSystem -Property Name, ConfigManager.DateTimeSystem  | %{
    #get host datetime system    $dts = get-view $_.ConfigManager.DateTimeSystem

    #get host time    $t = $dts.QueryDateTime()

    #calculate time difference in seconds    $s = ( $t - [DateTime]::UtcNow).TotalSeconds

    #check if time difference is too much    if([math]::abs($s) -gt $allowedDifferenceSeconds){
        #print host and time difference in seconds        $body += ("On " + $_.Name + " the time difference is "  + $s + " seconds`r" | Out-String)
    }
    else{
        $body +=  ("Time on " + $_.Name + " within allowed range`r" | Out-String)
    }
}

$smtpSrv = "smtp.domain.com"$from = "[email protected]"$to = "[email protected]"$subject = "VM Host Time Report"
$msg = new-object Net.Mail.MailMessage($from,$to,$subject,$body)

$smtp = new-object Net.Mail.SMTPclient($smtpSrv)

$smtp.send($msg)

  • Possibility to change the rollover button via events State?

    I have a small AIR application, I wrote that basically allows instructors open vehicle different sovereign control panel, set the positions of the controls on the Panel and then take screenshots for their educational materials. Since some of the panels receive enough complex, I thought it would be nice to have a function such that they could see where all of the invisible buttons are for all controls on a Panel.

    My first thought was to just put all the buttons to their rollover State, but that went nowhere part quickly (they aren't MovieClips, they are SimpleButtons), so my next thought was to send somehow a turning event to each button to force it to the rollover State. But I can't seem to get anywhere with anyone...

    If I do:

         btnDn.dispatchEvent( new Event(MouseEvent.MOUSE_OVER) );

    nothing notable happens.

    Does anyone have pointers on this? I'm looking for something stupid and impossible?

    I have a DIY class where I simply swap the upState and exaggerate buttons, but it feels ridiculous overkill for something that seems like it should be so simple...

    Thanks in advance,

    Eric.

    a temporary variable is necessary.  If you want to optimize this code so there's minimal work for the flash player, use:

    var tempState:DisplayObject;

    function swapUpOverF(btn:SimpleButton):void {}

    tempState = btn.upState;

    btn.upState = btn.overState;

    btn.overState = tempState;

    }

  • Is it possible to send the message to the Notes

    I save e-mails to the Notes application.  Is it possible to do it directly from Mail?  I know that I can export a message to a PDF file and then share this file Notes.  I'm looking to find a way to do it directly from Mail.

    No, not directly. And why would you need to do? Save e-mails in the e-mail program where you can access when you want to to have the ability to search for them.

  • IM new to LabVIEW. Is it possible to send the signal to more than one parcel on a chart by using the value property of the graph node

    I'm new to LabVIEW. IAM trying to display two plots on a graph using the node property value charts. I tried to feed the two signals into a signal of fusion and then in the value property node, but it did not work. Then I tried to build a table of two signals and it powers the value of hardware node. It did not work. What escapes me, should I use the node property value this way?


  • Is it possible to send the response to the client with the SOAP header containing the user information in JAX - WS?

    Hello

    I use JDev 11.1.1.7.0 and Weblogic 10.3.

    I have a JAX - WS based web service on which authentication and authorization was in place and operational.

    The SOAP request carries information of SOAP header with the token of user name and password for authentication. Similarly the SOAP response can also transport header to the client information? So that the customer who receives the answer happens to knowledge of who he actually received the answer.

    Thanks in advance.

    Hi Harsha,

    Is quite easy to define soap headers in a response message soap envelope. No need to use handlers either. Please find the link that would be useful below.

    You must use the WebParam property and set the modes for messages (IN, OUT, INOUT) and you can pass multiple values JAX WS service using "javax.xml.ws.Holder".

    http://tomee.Apache.org/examples-trunk/WebService-holder/Readme.html

    Please find the sample and put interfaces implement the Web service for the same.

    Interface:

    @WebMethod (operationName = "GetItemDetails", action = "http://xmlns.org/ItemService/GetItemDetails/V1")

    Public Sub getItemDetails)

    @WebParam (name = "ItemCandListServiceMessage", targetNamespace = "http://xmlns.org/ItemCandList", partName is "ItemRequest" mode = Mode.IN) ItemCandListServiceMessageCmplxType itemRequest,.

    @WebParam (name = "ItemServiceMessage", targetNamespace = "http://xmlns.org/Item", partName is "ItemResponse" mode = Mode.OUT) owner itemResponse,.

    @WebParam (name = "ItemSOAPHeader", targetNamespace = "http://xmlns.org/ItemSOAPHeader", "ItemSOAPHeader" = partName, header = true, mode = Mode.INOUT) holder itemSOAPHeader)

    throws ItemFaultMessage

    ;

    Implementation:

    public void getItemDetails (ItemCandListServiceMessageCmplxType itemRequest, door itemResponse, door itemSOAPHeader) throw {ItemFaultMessage}

    itemResponse.value = objectFactory.createItemServiceMessageCmplxType ();

    itemSOAPHeader.value.setRequestId ("response");

    itemResponse.value = itemServiceBean.getItemDetails (itemRequest, itemSOAPHeader.value, itemResponse.value);

    }

  • Need help to send the result of the query via utl_stmp

    11.2.0.3
    got the code of http://www.oracle-base.com/articles/misc/email-from-oracle-plsql.php#multiline send e-mail
    CREATE OR REPLACE PROCEDURE send_mail (p_to        IN VARCHAR2,
                                       p_from      IN VARCHAR2,
                                       p_subject   IN VARCHAR2,
                                       p_message   IN VARCHAR2,
                                       p_smtp_host IN VARCHAR2,
                                       p_smtp_port IN NUMBER DEFAULT 25)
AS
  l_mail_conn   UTL_SMTP.connection;
BEGIN
  l_mail_conn := UTL_SMTP.open_connection(p_smtp_host, p_smtp_port);
  UTL_SMTP.helo(l_mail_conn, p_smtp_host);
  UTL_SMTP.mail(l_mail_conn, p_from);
  UTL_SMTP.rcpt(l_mail_conn, p_to);

  UTL_SMTP.open_data(l_mail_conn);
  
  UTL_SMTP.write_data(l_mail_conn, 'Date: ' || TO_CHAR(SYSDATE, 'DD-MON-YYYY HH24:MI:SS') || UTL_TCP.crlf);
  UTL_SMTP.write_data(l_mail_conn, 'To: ' || p_to || UTL_TCP.crlf);
  UTL_SMTP.write_data(l_mail_conn, 'From: ' || p_from || UTL_TCP.crlf);
  UTL_SMTP.write_data(l_mail_conn, 'Subject: ' || p_subject || UTL_TCP.crlf);
  UTL_SMTP.write_data(l_mail_conn, 'Reply-To: ' || p_from || UTL_TCP.crlf || UTL_TCP.crlf);
  
  UTL_SMTP.write_data(l_mail_conn, p_message || UTL_TCP.crlf || UTL_TCP.crlf);
  UTL_SMTP.close_data(l_mail_conn);

  UTL_SMTP.quit(l_mail_conn);
END;
/
    I want to call send_mail to pass a query result to "p_message":
    as an example:
    Select the sid, program, module, session machine $ v where program = 'XXX ';

    And have struggled with the lack of experience in PLSQL.
    Give advice.
    TIA

    The simplest possible thing would be something like

    DECLARE
  l_message VARCHAR2(32000);
BEGIN
  FOR i IN (your_query)
  LOOP
    l_message := l_message || i.col1 || ' ' || i.col2 || ' ' || ... || i.col3 || utl_tcp.crlf;
  END LOOP;

  <>
END

    This assumes that the total amount of data we're talking about is reasonably low (which is small enough that you can use a VARCHAR2). And you want a text with a data dump email basically unformatted. You may be better served with an HTML message that includes the appropriate in the body HTML formatting. And you might need your procedure send_mail to accept a CLOB rather than a VARCHAR2.

    Justin

  • Possibility to separate the results into different target OEDQ files?

    Hello

    I'm looking for ways to separate the files target in OEDQ, just a short example to clarify:

    -J' created a snapshot of a data store, could be the database or XML-sheet with for example 1,000 records
    -J' created a process with a validation rule control business

    -The output of this audit is that 800 records are valid, 200 records are not valid

    -800 valid records to be exported to a file in the directory

    -200 invalid records must be exported to a file in directory B

    Are there standard features in OEDQ that makes this possible? If so in what ways? If this isn't the case, you have some tips how to do otherwise?

    Thank you for your response.

    Best regards

    Nik

    It is of course possible. Create a data store to your store of input data (you can drag it to the databases node to create a copy) and just use a different file name (stylesheet even assuming you are using one). Then write records that fail the staging database (if you can stage their) or a data interface (if you haven't) and create an export to your new database of staging data interface and use it in your business. Very simple.

    A process can have a number any readers and writers.

  • Send the results of a report PowerCLI

    I would like to take this simple report and send it in two parts attached - one in html format and another to the .csv format using an SMTP server.  What is the correct format to do this?

    Get - vm | Select the name numcpu vmhost, memorygb, record, comments

    Thank you!

    Try something like this

    $report = Get-VM | select name, numcpu, vmhost, memorygb, folder, guest

$reportHtml = $report | ConvertTo-Html | Out-String$report | Export-Csv report.csv -NoTypeInformation -UseCulture

Send-MailMessage -To [email protected] -Subject Report `  -SmtpServer mail.lucd.info -From [email protected] `  -BodyAsHtml -Body $reportHtml -Attachments report.csv

  • You can use 7 Captivate to send the results of the quiz managers?

    I create several trivia MC very basic for a small training audience. Their managers would like to be notified by e-mail, if the students passes/a failed the test. Is this possible with Captivate 7?

    Welcome to the forum,

    E-mail is no longer included because it was not reliable at all.

    You can take a look at this widget by Jim Leichliter: http://captivatedev.com/2012/11/12/adobe-captivate-6-x-widget-google-lms-with-email-report ing-2 /

    It is also possible if you are familiar with JavaScript to create such a solution.

    Lilybiri

Maybe you are looking for