In the edition not available on some browser hosts

Similar Questions

• Latest version of the app not available for some devices

  BB App World, the latest version shows approved. But when we try to install in the device, the world of the app in the device (9900) not showing the last version. The name of the application's AACM and latest version 3.1

  Please help solve the problem.

  Correct, you will not be able to remove a package, but the configuration that you have changed them should solve the problem.

  I have re - has approved the release.  It can take a few hours to see if the changes have solved the problem of some users not seeing the most recent version.

• Software used to decode the media not available on this system

  I read a lot on this subject on various sites of forms and failed to find a solution.

  My project is filmed in 1080i @22Mbps and is 2 hours long that I split on two discs... There is NO images or graphics aside a grab single image to roll over the titles, there is some .mp3 and one. WMA file for audio.

  My method of editing, I edited the entire project in a single calendar, so when I get overall even length I it spread over approximately a two-disc length... Disc 2 was made as H.264 blu - ray and any in yet for blu - ray authoring this worked flawlessly, however with disc one I get the error "the software used to decode the media not available on this system...". blah blah blah! »

  I'm working on windows 10 PC with enough RAM and processing power and graphics.

  Can anyone provide a reason or a solution please.

  I rechecked the timeline and there are no gaps or breaks in there, I made the file as H.264 and imported the .mp4 still work but flow is low.

  Thank you

  P.

  Ok.. then MPEG2-Blu-ray has imported and burned to disc correctly... I'll let discs go to the client in this format and hope that its ok for them

• Specifications of the system 'not available '.

  Randomly, I decided today to go look at my laptop specs, I compared the configuration required for the games, and when I went to my computer system properties section, I met a problem: the categories of installed memory (RAM) and processor were not to display their values, but instead, showing the message "not available". in front of these two categories.

  I don't know why this is happening, and this is the first time I have encountered such a mistake. I've done several analyses of malware on my computer, to make sure it wasn't something of the sort, but after these scans and cleanings, the problem persists.

  Any help to understand this would be greatly appreciated.

  Hello

  I suggest you perform the upgrade on the spot. An upgrade on the spot is the final solution before you have to reinstall the operating system.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099

  Note: Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process. Make sure that you back up all data.

  Let us know the update after trying the steps above.

• I can't use the link 'Check the seats' on Delta when I use Firefox, but Safari works fine. I get the message "not available at this time" when you use Firefox, but when I go on Safari it works just fine.

  I can't use the link 'Check the seats' on the website of Delta Airlines when I use Firefox, but Safari works fine. I get the message "not available at this time" when you use Firefox, but when I go on Safari it works just fine. I love Firefox but it sucks!

  This problem may be caused by corrupted cookies.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/cookies

• I bought a package of cloud, but he regretted later. I want to cancel the transaction, not available any document generated by buying. What is the procedure?

  I bought a package of cloud, but he regretted later. I want to cancel the transaction, not available any document generated by buying. What is the procedure?     I bought a package of cloud, but he regretted later. I want to cancel the transaction, not available any document generated by buying. What is the procedure?                                                       I bought a package of cloud, but he regretted later. I want to cancel the transaction, not available any document generated by buying. What is the procedure?

  Hi Marine,

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Kind regards

  Sheena

• 'Export to Digital Editions' not available in the file menu

  I passed the age looking around screens help & forums here and I see that other people have problems with the epub files from 'Export for Digital Editions' (so it must be possible to make an epub file), but I can still access this option because it is grayed out in my file menu.  I have InDesign CS4 6.0.5 installed on my PC with Windows XP op sys.

  I have installed Digital Editions free Adobe (even if I have other software to play files ePub, for example, of my Sony Reader), but it made no difference. With my open InDesign document the option above is simply not available to me & nowhere wherever I can find on this site suggests how I can make it available.

  I hope it's something obvious to others, but I'm afraid I don't think InDesign to be intuitive.  I would be grateful for any help in getting this work.

  Sylvia

  There was a previous case here where Preferences replacement helped in a case like this.

• Newbie? Why did the CSS stylesheet work in some browser & amp; not in others?

  I'm new to DW - always used GoLive - make the transition.
  
  I created styles in an internal style sheet and them moves on an external style sheet. The page works fine on my computer with the external style sheet in every browser I check it in but... When I download the page with the external stylesheet to the server-it only works in Safari, Opera, Windows IE-6. It does work in FireFox 2 and Netscape 9. It is as if there is no stylesheet attached to the document. Can someone explain what is happening? I tried everything but can not understand. Don't know enough to ask the right questions in google.
  
  http://www.summitcom.NET/PII/index5.html
  
  Any help really appreciated.
  
  Thank you
  
  Jim
  
  
  
  

  Osgood,

  Thanks for the suggestion. You were quite correct. I have contacted my server company, sent the URL you provided to them so the owner could see what the problem was and would be able to fix it. They didn't believe me at first.

  They just called and said that they fixed. It now works correctly.

  Thanks for the help.

  Jim

• Wake on LAN in the BIOS not available

  3847 Inspiron desktop computer. I want WOL to work. It is said in the BIOS disabled. However, it is also grayed out and I can't move allow.

  Link light is NOT on when power off.

  Other card network through the operating system settings are enabled, but the command does not work. (Works with other computers I have)

  Help please!

  Adam

  The online manual does not list the BIOS screens I can't see the options. I guess that it is simply not available in this model and therefore grayed out.

  Y at - it an option for PXE or something else which must be activated in order to make the option available WOL? You have to change some power settings in the BIOS so that the network card is not off?

  You can try to reset the BIOS by default to see if there is just a mistake that can be erased:

  1. Restart, and then press F2 to open Setup
  2. Copy down all current settings
  3. Switch off and disconnect
  4. Power button press / hold for about 15 seconds
  5. Open the case and remove the motherboard battery
  6. Power button press / hold for about 30 seconds
  7. Replace the battery (right-side-to the top!)
  8. Reboot and press F2
  9. See if the WOL is available now
  10. And if you encounter startup problems, make sure that the BIOS settings match what you copied

• Fonts are not available in some applications

  Hello

  Is there a way to fix a problem where some system fonts are not displayed in some programs? I thought it was problem of the program, but I was told that this is a problem with the .net runtime. I wanted to use a font of open Type, which is already installed in Windows, but is not available in the program that I use.

  I don't understand how .net or things like this work because I'm not a technical person. I hope someone could enlighten us.

  Thank you!

  Hello

  Thank you for the update on the issue.

  If you are sure that the problem is with .net, you can check the suggestions posted by Anil Kumar B responded on January 3, 2013, on a similar issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Microsoftnet-framework-issues/41c2591d-ee30-47D5-9de8-85bf129cd96e

  Let us know if you need more assistance. We will be happy to help you.

• Manage the option not available & administrative tools not available

  Using windows 7 Home Basic in my laptop. Now am not able to get to 'manage' option to right-click on 'My Computer' & when I try to access administrative tools in the control panel his watch an error as the location is not available. What should I do? Help, please.

  Feisal

  Hello

  1. What is the exact error message do you get?

  2. have there been recent changes to the computer before the show?

  Method 1: I suggest you of scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: Also I suggest to open the original location administrative tools and check if the same problem persists.

  "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors."

  Method 3: you can also your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• DC Standard Adobe works with MacBook Pro?   When I tried to download, I get the message not available - only for windows!

  I was chatting to Adobe online, I got info that it WORKS with the MacBook Pro.  I went on the link they sent to download and received the message is not available for the MAC operating system.

  If you download the mac version, it should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Someone at - he managed to get the "page not available" message when you try to download apps?

  I recently joined the Adobe Creative cloud, but when I try to download one of the applications I get a blank page with the message "page not available", I tried both THE 11 and 14 of Chrome, both with the same results. I've also temporarily disabled firewall/scanner virus and anti spam, but without result. I use the optimized UK Server?

  I think it's due to the interruption of the Adobe server / comms reset

  Any ideas?

  David UK

  I have not seen other reports of this problem.

  I suspect that you have a local network problem.

• I have Adobe Acrobat Pro XI.  I went to special characters from the Edit menu and choose some emoji as Favorites, but I can't understand how to insert in the document.  How can I insert special characters into a document?

  How can I insert emoji or other special characters in a document using Adobe Acrobat Pro XI?  I went to special characters from the Edit menu and may not understand how to insert the special character in the document.

  He's not that kind of editor. You can use the characters in a font. If you can select a font with the emoji, which fits into the case, and then enter the characters, it can work.

  This suggests that you try to do TOO MUCH with a PDF file. It is a common thing, but the message should be: everything simply because you can edit a PDF file, does not mean that it is the most effective way for you to do your job.

• Manager of the company - not available Agent connection

  Hello
  
  When I tried to open the Enterprise Manager, I blank homepage indicating that Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Listener not available, etc.
  
  but my interlocutor is in place and the status of emctl also running...
  
  help in this regard, hiighly appreciated!
  
  Thank you
  RAS

  you could re-create the company Manager for this problem