In the event of failure to start / HP 8510w

Similar Questions

• The event log does not start error 31: a device attached to the system is not functioning

  I can't get the service to start on my winxp sp3 pc event log. I have tried everything I know:

  • Running sfc/scannow
  • Reset permissions
  • Search for malware and viruses
  • Rebuild the WMI
  • Create a new account
  Nothing seems to work, I think that this is related to an error in hardware/device, but I see no problem in Device Manager. Can someone point me in the right direction to get this resolved? I don't really want to have to format or restore my PC...
  Thank you.

  * EDIT * well it seems to have fixed myself, I used regedit and navigate to the key:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\EventLog
  
  
  There, I found some records, I deleted the folder "Powershell" and the "Internet Explorer" folder, and the event log service, and then began. I had uninstalled IE and Powershell but these records were still there so I thought I would like to remove to see if he has made all the difference.
  Thanks for your time!
  -Antoni

• Update in the event of failure of realtek 8188ce

  Is it possible that the realtek_wlan_win7_2000016L_20110523.zip.91g4uva of update can not support my operating system is windows 7? It gives me this message when I trie to install this update:
  -Sorry! We do not support this operating system... Is this normal?

  Please don t get me wrong, but I don't understand your question.
  You want to update WLAN driver or what?

  If yes latest driver can be downloaded from the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
  Check it out.

• CC of Lightroom in the event of failure Win10 install

  Installation of Lightroom CC on a new Dell computer running Win 10. Received error message "failed to install Microsoft Visual C++ 2008 Redistributable Package (x 64)."

  The Photoshop, Bridge, and Lightroom seem to be installed and current execution, but can't get the Visual C program to run. Everyone had the same experience?

  Hi Philippe,.

  Please follow the steps below:

  1. go to > Panel > Microsoft Visual c++ 2008 Redistributable Package (x 64) > click UnInstall > a new window will appear select REPAIR inside

  2. after that, restart the computer and restart the creative application of cloud and check

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• 7 animation of necessity in the event of failure of Captivate

  I'm new to Captivate and is working on a training simulation. I want to see an animation that points to the click box after 3 failed attempts.  I tried everything I can think of.  I put the LAST ATTEMPT to apply with the defined Animation effects, but no matter what I do, the animation playback depending on the timeline in the properties of the click box Panel. I also tried to set the timing for the animation object. I don't think there should be a time in the animation, it should show after that 3 unsuccessful attempts.  Be as detailed as possible if you can help.

  Apparently you did not read my last paragraph:

  "That the animation should be hidden, uncheck 'Visible output' in the properties panel." After the third attempt, the animation will play AND head out of reading. This means that if you want to stay in the slide, maybe you need to add another box to click which is a break just after the animation. »

  You must use the "Animation Show" action in the Actions panel for "after the last attempt. Who will free the read head and display the animation.

• Write backup files as reading takes place in the event of computer failure

  Hello

  My application involves sometimes to test outdoors.  We have a PC equipment and robust data acquisition.  I'm in the Northeast, where in recent weeks were cold and we had to do a test on the outside.  Long story short, in the middle of the test the computer shut down (probably because it was too cold for the computer according to the data sheet) and I lost all the data from the sensor.  The coomputer works fine BTW when I brought it back inside.

  The reason for which the data have been lost was because the program never completed and so the function that creates the data file has a chance to run.  Now, the data acquisition card, we used is very old and obsolete.  I am trying to upgrade the equipment with components or (PCI-6221) and a box of CSC-2345 with modules for two load cells load cells.  At the same time, I am writing a LabVIEW application that improves the old, obsolete program.

  I want the application to write a file in spreadsheet with all the information of the sensor continuously as the test proceeds in the event of failure of the computer midtest.  In this way, I at least have some saved data.  I explained all this to another engineer here and he says that he cannot make this way at high sampling rates (I want to run the program at 1 kHz for 60 seconds).  His reason was that the writing on file screws up the waveforms that we measure because the file must be opened, the data gets written and then closed for each line of data points.  He argues that the resources of the computer will be linked up as it tries to write the file while the program is data acquisition and store these data in a buffer.

  So my question is: what is the recommended architecture to write a backup file as a test occurs with a high (1 kHz and 10 kHz) sample rate when the computer shuts down or some other failure?  Also, what are the limits of performance when writing data to a file within the same line as the VI 'read '?

  Thank you.

  Rate from 1 to 10 kHz are in fact rather slow. You can use an architecture of producer/consumer to save text files, and there is simply no reason to open and close files permanently. With DAQmx, you can listen directly to the disk at much higher rates.

• Can I drag the event target source drag?

  I have adds drag and drop features of a tree control on a VI at several targets of slipping on different VI.  For example, they can drag the tree for a XY Chart on another VI, a table to an another VI, a digital indicator on an another VI, etc...  In addition, when they abandon the data, I need to know where he left it down and initiate an action from the drag source (tree control) VI.

  My problem is, I see no way to determine what VI and control the move action took place the.  I'm basically looking to the control reference of the operation drag and drop target once the drop event occurs.

  I know that I should add a few cases of event for all the different targets, but I try to keep the minimal code and keep most of the complexity of the VI with the source.  If I have, I will use some sort of a global or the driving force to write an identifier of the target VI to a place where the source VI can be read, but I'd rather not do that in many places so I don't have to.

  Create your own event type user 'Control' and save it in the same diagram as source Tree. On the event of filter "Drag start?" of the source tree, inject this event Ref use in drag data (it will take be flattened). Then, in the 'Drop' unflatten handler this Ref user event and send event user with the value of the event data "Ref" of this event handler 'drop '. It is a form of a callback function, which is much more reliable than a global engine or action that exposes the risks of racing conditions.

• structure of the event a substitute

  Hello everyone and sorry for what I think may be a very newbie question, but I can't understand not just how to use the structure of the event in my program.

  The presentation is as follows:

  I'm using labview for control devices in my lab.  I have to activate something for 30 minutes, then heat it for an another 30 miunutes (the first device is controlled DAQ and the second is controlled GPIB).  While these two processes occur, I monitor a temperature using the data acquisition card.  The two-step process is finished, I have to wait for the temperature to be lower at some point and then start again it.  So, I have to repeat this process for a number of times defined by the user.

  My question is this, I use a structure of the event to handle it all (this is maybe not the best way to do it, if you know a better way, feel free to share!).  The whole process of starting the program, I want to be able to stop it at any time in case something goes wrong, and I would do this by using a Boolean on the front panel, because I will finally control the process from a distance.  Is it possible to substitute a case of the event once it has started?  I have no doubt a 'Wait (ms)' VI in there somewhere to facilitate synchronization of processes, but once the VI begins the program waits until it is done before register you for any other button presses.

  Thanks in advance for any response,

  -daman

  You should definitely read up on State Machines!

  Maybe the link in my previous post doesn't work.  Try these.

  Reference design - http://zone.ni.com/devzone/cda/epd/p/id/6091

  State machines - http://zone.ni.com/devzone/cda/tut/p/id/3024

  ExpressionFlow Blog on policy - http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/

  Machine States JKI - http://jkisoft.com/state-machine/

• Random BSoD occurrences, can not read the message because no option to put an end to restart in the event of system failure.

  My girlfriend has a HP dv4-1465dx experiencing hardware problems, the laptop will be blue screen randomly and then restart 1-3 seconds later. When you restart the laptop reads, "No boot device - insert boot disk and press any key." If the laptop is turned off and turn it on again, it works fine, until the next BSoD. The first time that this error the hard drive was seized up, unable to enter a bank hard disk enclosure repair attempts that forced me to buy a new one.

  I tried the bios of an option to disable the restart in the event of system failure so I could read the error message, but it only gave me discover that HP has less useful bios in the world and that no such possibility existed; Yes I have updated the bios. Start/hardware error logs contained no data also, what so ever.

  The hard drive is fine, I ran it in my office for several days. a BSoD happens within his laptop several times a day.

  I don't know what to do at this point is that I have nothing to work outside of, I hope someone has a useful idea. The laptop is no longer under warranty, but this is ridiculous, how fast this thing is falling apart (literally... screws are only randomly drop the case).

  Yes I really don't think that this is the case. As mentioned above is not my laptop so I'll probably wait until he decides to restart not at all before eventually taking an iron to be welded to it. Thanks for all the information, assume that nothing can be done at this stage.

• The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

  I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

  original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

  Hello Steven,

  Did you ever receive notifications that a virus or malware has been removed from your system recently?
  My only thought is that it is the remains of an infection on your machine.
  It is most likely harmless, but I don't understand why you'd be concerned.
  Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
  http://support.Microsoft.com/kb/308569
  I would check to see if there are tasks to run at startup:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true

• I built a new system. Transferred to the hard drive and video card, but everything else is new. Restart Windows as it begins to start. I can get into safe mode and found event id 7026 and event id 7001 in the event viewer.

  As mentioned above, this is a new system, but with a more older IDE hard drive with windows xp pack 2 service (I think). When you first start, it says that windows is not stopped correctly and asks me to choose whether to start it normally or without failure or last known working configuration. When I choose to start windows normally, it will load up to a point. The screen of Windows Xp will come with the slide bar. It will then restart. When I choose to start in safe mode, a bunch of 32 file system scrolls upwards on the screen. I don't remember if it of normal or not. He takes over in SafeMode but. I went to the event viewer and got the following errors.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7026

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The next (s) starting or starting system could not load:

  AFD

  Avgldx86

  AvgMfx86

  Avgtdix

  FIPS

  IPSec

  MRxSmb

  NetBIOS

  NetBT

  Processor

  Rdbss

  Rdbss

  Tcpip

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The Hello Service service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  TCP/IP NetBIOS assistance service depends on the AFD service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I did find something online that contains all the system boot or start specific drivers. Windows and harddrive was working in another computer just before he was switched. Let me know if you need other information.

  Thank you.

  First of all you are missing probably a number of device drivers, particularly the network card driver and the driver of the motherboard.  Use your XP disk to perform a repair installation.  This should go a long way toward you're going to get.  If your new box has a driver disc that should help a lot.  You can't port XP perfectly the way you did.   It usually requires a repair installation to fix the hardware abstraction layer. Colin Barnhorst

• Since the download of Firefox 4, I have problems of archiving of conversations from my gmail Inbox view. Also, when I go to enter a new event in google calendar, I have to now click the cursor in the box type of the event (it used to let me just start typ

  Since the download of Firefox 4, I have problems of archiving gmail conversations since my Inbox view (one or more conversations) as it says 'No. Conversations selected' when I selected one or more. Also, when I go to enter a new event in google calendar, I have to click the cursor in the field type of the event (it used to let me just start typing) or else he bends and begins to jump to the day view or another month. Does anyone know how to fix one of these?

  I had this problem; But while trying to solve another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset the preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

• I receive a failure Audit Event Id 532 in the event of safety in numbers of Web servers.

  Hello

  I'm a domain administrator has recently left his job and his account has been disabled. Since I have disabled his account I get Failure Audit Event Id 532 in the event of safety in numbers of Web servers.

  Original event ID Title: Kerberos 532

  The event Id error on the Web server:

  Event type: Failure Audit
  Event source: security
  Event category: opening/closing session
  Event ID: 532
  Date: 10/07/2012
  Time: 14:38:12
  User: NT AUTHORITY\SYSTEM
  Computer: SERVERWEB2
  Description:
  Connection failure:
  Reason: The specified user account has expired
  User name:
  Domain:
  Logon type: 3
  Logon process: Authz
  Authentication package: Kerberos
  Workstation name: SERVERWEB2
  The name of the user calling: SERVERWEB2$
  Caller domain: DOMAIN name
  Caller logon ID: (0x0, 0x3E7)
  Calling process ID: 2532
  Transited Services: -.
  Source network address: -.
  Source port: -.

  At the same time, I get a DNS error in Netlogon.log on the same server:

  07/10 14:38:12 [SESSION] I_NetLogonGetAuthData called: (null) DOMAIN name (flags, 0x1)
  07/10 14:38:12 [MISC] DsGetDcName function called: Dom: DNS. DOMAIN.NAME Acct: (null) flags: DS RET_DNS
  07/10 14:38:12 [MISC] NetpDcGetName: DNS. DOMAIN.NAME using updated information in cache
  07/10 14:38:12 [MISC] DsGetDcName function returns 0: Dom: NOM_DOMAINE Acct: (null) flags: DS RET_DNS

  At the same time I get 4769 Failure Audit event IDs in the event of security in Active Directory:

  Log name: security
  Source: Microsoft-Windows-security-auditing
  Date: 10/07/2012 14:38:12
  Event ID: 4769
  Task category: Ticket to Service Kerberos Operations
  Level: Information
  Keywords: Audit failure
  User: n/a
  Computer: ActiveDirectory2.DNS.DOMAIN.NAME
  Description:
  A Kerberos service ticket has been requested.

  Account information:
  Account name: * address email is removed from the privacy *
  Account domain: DNS. DOMAIN.NAME
  Logon GUID: {00000000-0000-0000-0000-000000000000}

  Service Information:
  Service name: host/serverweb2.dns.domain.name
  Service ID: NULL SID

  Network information:
  Customer's address: 192.168.101.11
  Client port: 1681

  Additional information:
  Ticket options: 0 x 40810000
  Ticket encryption type: 0xffffffff
  Error code: 0 x 12
  Transited Services: -.

  This event is generated whenever access is requested to a resource such as a computer or a Windows service.  The name service indicates the resource to which access has been requested.

  This event can be correlated with the Windows login events by comparing fields GUID for session opening in each event.  The logon event occurs on the machine that was consulted, which is often a different machine than the domain controller that issued the service ticket.

  Options of ticket, the types of encryption and failure codes are defined in RFC 4120.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      4769
      0
      0
      14337
      0
      0 x 8010000000000000
     
      859551364
     
     
      Security
      ActiveDirectory2.dns.domain.name
     
   
   
      E-mail address is removed from the privacy *.
      DNS.domain.Name
      Host/serverweb2. DNS.domain.Name
      S 1-0-0
      0 x 40810000
      0xFFFFFFFF
      192.168.101.11
      1681
      0x12
      {00000000-0000-0000-0000-000000000000}
      -
   
  

  What I have so far:

  1. If I activate the user account of the former employee, it connects are deleted.

  2. deleted and joined the server from the domian, always I had questions.

  Any ideas please.

  Sikora

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi sarathchelika,

  You must post your question to the TechNet forums because it caters to an audience of it professionals.

  To do this, you must refer to the below mentioned link.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this helps!

   

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Message in the event viewer running XP Pro with SP3 get following: 7026 ID: start system or boot start drivers following could not load: nvatabus nvraid. How can I fix it?

  Get the following in the Event Viewer error message have had this message for quite some time

  ID 7026: boot start or system start following

  driver (s) failed to load: nvatabus nvraid. How do I

  This difficulty?  I am running XP Pro SP3. Would appreciate any help in this matter.

  Hello

  · What is the number and the model of the computer?

  · Remember the recent changes on the previous computer o the question?

  The problem is related to the display driver installed on the computer.

  Check the status of the card/video display adapter installed on your computer.

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, look for the screen reader and expand the drive, double-click the sub element to check if an error message or error code is listed.

  See the links below: http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=7026&EvtSrc=Service+Control+Manager&LCID=1033

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658