Color LaserJet M277dw: Purchase a new ejection M277dw impossible drawer which allows to change the toner cartridges

Similar Questions

• Color LaserJet 2605dn: changing the toner cartridge guaranteed?

  Can someone help me to replace what seems to be a faulty cartridge? I could find absolutely no information on how to do it on HP's Support website to the regular address.

  Q6003A magenta toner cartridge prints very light. Looks pink instead of magenta. This is true even on the 'Page State supplies", which shows the level of toner to 74%: Pages printed with this power supply: 418; Rest of approximate Pages: 1189. I have 'shaken gently"the magenta cartridge without result, and I see no flaws on the drum. 'Cleaning' running mode did not help; He only printed black. The other three cartridges all show them a solid color, so I deduce that there is a problem with the magenta cartridge itself.

  See below. The title and the area around it are supposed to be "Purple"; There should be a (not complete magenta) rose "2605dn" to the right of the printer "HP Color LaserJet.

  Any suggestions as to how to get this replaced would be greatly appreciated.

  

  You do not have a faulty cartridge, you have a dusty mirror in scanner Assembly laser.

  You will find the instructions on how to disassemble the printer and clean the mirror through various sources online and probably even in the forums.

  The index that identifies your problem is melted magenta from left to right.

  If you decide to take the machine apart and clean the flat mirror handle cables very gently then reconnect the very carefully.

• HP Color LaserJet M277dw MFP: I forgot password and admin user name

  I have a HP Color LaserJet M277dw MFP and I forgot the username admin and the password.  They were the two changed wwhen the printer was purchased. Is it possible to reset back to factory default admin/admin?

  Go to this web link, the instructions are there.

  http://ow.LY/Bbpy305fOQk

  rbogdan

• HP Color LaserJet M277dw MFP: HP Color LaserJet M277dw MFP - may not wake from sleep

  Hello

  This has been put to death elsewhere, but I have not found a solution that works.

  I'm close to return this product, but thought I'd have one last try here.

  I have a brand new HP Color LaserJet M277dw MFP. It works very well. Apart from one thing, when the printer goes into sleep mode, I can't he wakes again and accept print jobs. Sometimes go to the printer by pressing the touch screen and turning market working again, but if I just send a print job if it is 'sleep' mode, it prints ever.

  Printer is connected via wifi only, no other method of connection.

  Printer is assigned a static IP address 192.168.1.105

  DHCP is disabled in the printer

  IPv6 is disabled in the printer.

  IP address of the router is 192.168.1.1

  DHCP is enabled in the router with a starting address of the 192.168.1.150 and an address to 192.168.1.199

  DNS primary and secondary 8.8.8.8. and 8.8.4.4 assigned in the printer.

  I've updated the firmware inside the printer to the most recent version, as well as pilots of Windows 10.

  I tried to reset everything and turning everything (including the printer itself, the router and all other PCs, laptops, tablets, phones etc...) and the new, but no joy.

  Can anyone help please?

  Thanks and greetings

  Nick

  I ran the HP print and scan doctor software, and this update the firmware datecode 20160606 printers.

  So far, that * seems * fixed the awakening of sleep problem. Fingers crossed!

  Detective Conan.

  Thank you

  Nick

• "The HP LaserJet 1020 has the open front door or the toner cartridge is missing." Not true

  I'm going to print something and the troublescreen said: The HP LaserJet 1020 has the open front door or the toner cartridge is missing. But the door is closed and the cartridge is fine. I put a new in after the message started appearing thinking that the low level of ink was casusing the change. I suspect a mechanical switch is kaput, but do not want to enter the machine. All the switches look and feel like they are working normally.

  This little machine of love, it's a real workhorse, simple and effective.  I use a laptop Samsung with Windows 7 and my actions joint the printer using a Toshiba PC. We both get the same response from our little hp... todius

  I will now let you know that we have done to resolve this.  My wife has stuck a pencil in the slot of reception for the closed cover pin located on the corner left front of the top cover. She shook it until she was able to close the lid and printing. He now works as it always has.

  Babe thank you... todius

• The appleid on my iphone is an old email address that I no longer have access and for which I don't remember the password. My ID apple implemented through my pc is my new e-mail address. How can I change the appleid on my iphone to match my new email addr

  The appleid on my iphone is an old email address that I no longer have access and for which I don't remember the password. My ID apple implemented through my pc is my new e-mail address. How can I change the application on my iphone to match my new email address

  Here is the procedure to change the Apple ID:

  Change your Apple - Apple Support ID

  If bad comes to worse, use the link below to contact the Apple Support.

• HP laserjet p1006: does not print after changing the toner

  I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

  Hi @cindycb,

  Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure all the orange, packaging material is to remove the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Open and close the cover five times quickly. It should print a page with black lines on it.

  You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

  You use Genuine HP Toner?

  Please let me know the result and if there is anything else I can help you. Thank you.

• HP Color LaserJet M277dw MFP Pro

  If possible print A3 paper size in the printer HP Color LaserJet Pro MFP M277dw model?

  According to the Color LaserJet Pro MFP M277dw page of the specifications, this printer does not support the size of A3 paper:

  

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• HP Color Laserjet M277dw MFP: Cannot scan HP Color Laserjet MFP M277dw on Mac OS 10.6

  Hello, I can not scan to network drive using the above mentioned printer. Scan to USB key is possible.

  I downloaded the update (version 20160331) firmware image, but impossible to install the program. After double click, nothing happens. Any ideas?

  Thank you and best regards

  Christoph

  Hi Christoph,

  The printer is not compatible with Snow Leopard, it is supported on Lion (10.7) or later versions.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-Pro-MFP-M277-series/7089945/model/7089949/document/c04515051/

  The update of the firmware utilitywas not desinged for your operating system and therefore does not work on it.

  As the connectewd printer to a network, follow these steps to update firmware directly from the menu of the printer:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04517106/

  If the implementation of scan to a shared folder on your grave down Mac, please specify the exact error, and the parameters used (path of the shared folder used, etc.) also well done you have shared this folder your Mac form?

• Without HP color laserjet M277dw MFP print margins

  Is it possible to print without margins with this printer? I need top print brochures and can not find the setting to make this possible.

  Thank you

  EKHC

  @EKHC

  EKHC wrote:

  Ah yes, I just read this in the owner's manual. Do you know if it is possible to download a driver that could change the status of permissioin to allow edge to edge printing?

  I used to think it was possible (another print driver) - I've learned since the ability to print without margins is related to the physical hardware: the printer can print without borders - or he can do.

  Assuming for the moment that there is a way "around the restriction, you can try Photo Creations (works for Windows and Mac).»  If the software can find a way to provide the service, it will do.

  Of RocketLife

  www.hp.com/go/hppc.

  Projects quick prints - you can download the software from here too:

  https://scripts.rocketlifeproduction.com/go/catalog.php/HP?category=prints_learnmore%23quickprints

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Color LaserJet MFP M277 dw Pro: Setup disk gives an error and stops before the connection to the printer

  Hello

  I try to install the printer 'Color LaserJet MFP M277 dw Pro'.
  By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.
  I use Windows XP SP3. It is always installed, but physically disconnected another printer hp (hp 2050).
  (I tried both to disable the antivirus that reduce to a minimal install, but the problem persists).
  Thank you

  Response thanks a lot.
  In the meantime, I contacted the Support of the Italy
  Who suggested that I try to update the driver.
  I downloaded the file "HP_LaserJet_M277_PCL6_Legacy_Print_Driver_14295".
  Automatic extraction and I launched and everything seems to work.
  (I still try to scan and fax if they work).
  Thank you very much.
  Thanks to your colleague Michelle with whom I chatted.
  Contact thank you for the support of Milan that I don't know the name.
  So, I can communicate the solution found.

• How can I create a new all-white or all-black layer without changing the current foreground color or background?

  I need to create a filled layer of black or white.  I need to do WITHOUT changing the current foreground or background colors. So I can't use the bucket tool. The reason is that I have created these layers inside Action and the need the current colors remain unchanged.

  Here's the easiest way I found to date:

  1. Layer-> new fill layer-> solid color...  Select one of the choices other than 'None '.  In the color picker dialog box, place the code hex #fff and click OK
  2. Layer-> rasterize-> content fill
  3. Layer-> Layer Mask-> remove

  Can someone suggest a simpler method?

  You can simply create a new empty layer and then go to Edit > fill and choose either black or white

• Installed new router wireless; don't know how to change the settings of the printer

  I just changed the wireless router that has created a problem with printing. I don't know what I have to do to change the printer settings to accommodate the new wireless router. Would be very happy for any help with how to do it. I'm on Windows XP SP3 with a HP all-in-one on a wireless laptop (no wired connection). Wireless router is a linksys. Free trial security AVG 8. Thank you!

  @jerrymcampbell, sorry you had a problem given that you got a new router.

  You will just need to reconnect the printer to the network again.

  What kind of printer you have?

  Function of the printer, you can access the network settings on the printer, choose the Setup wireless and connect to the new network wizard.

  After that, go to the computer and to update the IP address.

  1. click on Start Menu

  2. Select all programs

  3 select the HP folder

  4. click on the name of the printer

  5 scroll to the IP ADDRESS UPDATE

• Adding new point to existing path which is NOT on the path

  I need to add a new point to a path that is not on the way, that I am trying to add.  In other words, I am trying to extend a line in a given direction, do not add a new point in the middle of an existing line.  I created the path using the pen tool, then I've done something else with another tool and then returned on my road.  I add_ _can a new point using the pen to click somewhere on the existing path, but this isn't what I want.  I want to add a new point on the way to extend the line (I use STROKE with no fill to create a line) in a certain direction.  No combination of keys I've tried seems to allow After Effects insists on creating a new, separate, Lane which is not what I need.  Any help appreciated, thx!

  1. Select the layer with the open path
  2. Select the tool pen (keyboard shortcut g)
  3. You hover over the path the cursor turns into a small black arrow
  4. Click on the vertex at each end of your open path
  5. The cursor now changes behind the pen tool
  6. Click anywhere to add another point on the path

  The trick is to not having all vertices in the path selected when you start