In the odi package, if mapping OK then si cartographie ok puis definissez set evaluate variable true

Similar Questions

• IF ELSE condition in the ODI package using

  Hello
  
  I want to use if condition in package ODI.
  My exact requirement is that if a column in a table has a certain value, the value "XYZ" only then I must go forward in the case otherwise I do not want to run the workflow of the entire package.
  I can get the count in a variable through count (*) where the value = "XYZ". But how to use this value to go further (if it's not 0 then flow should start on the other end).
  
  Thank you
  Sudeep

  Sudeep salvation,

  You have what we call 'Evaluate' type of variable in ODI to implement so, another condition.

  You must drag and drop the same variable for your package, make it as variable Evaluate (check in the Properties tab below) and that verification of the status of 'superior' to 0, the OK should do the extra step.

  Thank you
  Guru

• Event deyection in the ODI package

  Hello
  
  I have a number of routines in a package and I want to restrict the execution of the interface if, in any proceeding,
  one of my oracle table is filled with records.
  
  My requirement is if my Oracle table is filled with then saves the execution of the
  interface in the package must be stopped.
  
  I was looking in the paper and I got event detection which I think would help me.
  If someone had used before or you know, please help
  
  I can do this with an event called odiWaitForData or some other possibilities are also there?
  Give me ideas so can I do this with another process of thought?
  
  Thank you
  Sourabh

  Hi Sourabh,

  My requirement is if my Oracle table is filled with then saves the execution of the
  interface in the package must be stopped.

  You can / handle using a variable of ODI.

  1. create a variable of the ODI, say "VAR_COUNT" (alphanumeric, no persistent) in writing tab refreshing the script below

  SELECT COUNT (*) FROM

  And select the respective logical schema.

  2. in the package, after the interface drag and drop VAR_COUNT twice, step get as refresh and then Evaluate and in giving > 0.

  3. connect the variable Evaluate false in your next interface.

  All the streams in your package,

  Interface 1 - OK-> VAR_COUNT (Refresh) - OK-> VAR_COUNT (Evaluate with condition > 0) - false-> Interface 2...

  Makes sense?

  Thank you
  Guru

• The parallel procedure in the ODI package

  I would like to implement a package in ODI do all tasks in a process flow that I had in OWB. a screenshot of what I had in OWB is here:

  http://postimg.org/image/dvixew9x3/

  AFAIK, in ODI we should be producing scenarios if we want to perform some procedures in parallel (whereas we had in the OWB, fork component that allows to launch procedures in parallel).

  The problem is that I have too many packages that almost all of them use these procedures with their own settings, so I have to generate around one hundred of each procedure scenarios. Scenarios of that difficult managers.

  What is your suggestion?

  If I understand correctly, the problem is with the option "Remember history" of your variables.

  If the history of keep is located on 'The most recent value' or 'All values', then the value will be shared by all sessions. If a session changes the value of a variable, the new value will be see by other sessions.

  If keep historical is set on 'No. History', the value will be isolated for each session. Change the value in a session will not affect the other. I guess you want to go for that one.

  In your packet for each of your scenario, you can go on the additional Variables tab in the properties and set the value of each variable.

  Kind regards

  JeromeFr

• Get the Error Message of all objects inside the ODI package failed

  Hello
  
  I created a variable for use in my charge pack with the following commands:
  
  SELECT 'A ' | CASE
  WHEN SSS. STEP_TYPE = 'F' THEN
  "INTERFACE".
  WHEN SSS. STEP_TYPE = "VD" THEN
  "DECLARACAO AGAIN.
  WHEN SSS. STEP_TYPE = 'VS' THEN
  "INCREASE DA AGAIN."
  WHEN SSS. STEP_TYPE = ' THEN
  "AVALIAÇÃO AGAIN."
  WHEN SSS. STEP_TYPE = 'V' THEN
  "ATUALIZACAO DA AGAIN."
  WHEN SSS. STEP_TYPE = 'T' CAN
  'PROCEDURE '.
  WHEN SSS. STEP_TYPE = "OE" THEN
  "COMANDO DO."
  WHEN SSS. STEP_TYPE = "IS" THEN
  "LOGGING MAKE ODI.
  WHEN SSS. STEP_TYPE = "RM" THEN
  "REVERSA ENGENHARIA DO MODELO.
  WHEN SSS. STEP_TYPE = "CM" THEN
  "CHECK MODELO.
  WHEN SSS. STEP_TYPE = "CS" THEN
  "CHECK SUB MODEL.
  WHEN SSS. STEP_TYPE = "CD" THEN
  "CHECK DATA STORE.
  WHEN SSS. STEP_TYPE = "JM" THEN
  "MODEL A LOG."
  WHEN SSS. STEP_TYPE = 'JD' THEN
  'LOG THE DATA STORE.
  END | ' ' || SSS. STEP_NAME | ', falhou devido a -' | SNET. TXT
  < % = OdiRef.getObjectName ("SNP_SESSION") % > SS,.
  < % = OdiRef.getObjectName ("SNP_SESS_STEP") % > SSS,.
  < % = OdiRef.getObjectName ("SNP_EXP_TXT") % > WOMEN'SNET
  WHERE SSS. SESS_NO = SS. SESS_NO
  AND SNET. I_TXT = SS. I_TXT_SESS_MESS
  AND SNET. TXT_ORD = 0
  AND SS. SESS_NO = < % = odiRef.getPrevStepLog ("SESS_NO") % >
  AND ROWNUM = 1
  
  Setting the variable to the schema, I am using and is defined as the last value, but when I run it returns me the following error:
  
  java.lang.Exception: error: no value to assign to this variable for DefDate:2010 - 08-31 02:40:52.0
  DefN:null
  DefV:null
  IndStore:L
  ITxtDefT:1307001
  ITxtVar:1306001
  SessNo:298001
  VarDatatype:T
  VarName: GLOBAL .vg_RETORNA_ERRO
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.execStdOrders (SnpSessTaskSqlV.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTaskTrt (SnpSessTaskSqlV.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTask (SnpSessTaskSqlV.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  The return of the variable is inserted into a file. Txt
  
  What can be wrong?
  
  Thank you!

  Based on our discussion offline. The query that worked.

  >

  SELECT 'la'. CASE
  WHEN SSS. STEP_TYPE = 'F' THEN 'INTERFACE '.
  WHEN SSS. STEP_TYPE = 'VD' THEN 'VARIABLE DECLARATION.
  WHEN SSS. STEP_TYPE = 'VS' THEN 'SET/INCREMENT VARAIBLE.
  WHEN SSS. STEP_TYPE = ' THEN 'EVALUATE THE VARIABLE '.
  WHEN SSS. STEP_TYPE = 'V' THEN 'REFRESH THE VARIABLE.
  WHEN SSS. STEP_TYPE = 'T' THEN 'PROCEDURE '.
  WHEN SSS. STEP_TYPE = 'OE' AND 'OS COMMAND.
  WHEN SSS. STEP_TYPE = "IS" THEN "ODI TOOL."
  WHEN SSS. STEP_TYPE = "RM" AND "MODEL OF REVERSE ENGINEERING".
  WHEN SSS. STEP_TYPE = "CM" THEN "VERIFY THE MODEL.
  WHEN SSS. STEP_TYPE = 'CS' THEN 'CHECK THE SUBMODEL.
  WHEN SSS. STEP_TYPE = 'CD' THEN 'CHECK DATA STORE.
  WHEN SSS. STEP_TYPE = "JM" THEN "JOURNAL MODEL.
  WHEN SSS. STEP_TYPE = 'JD' THEN 'LOG THE DATA STORE.
  END | » '|| SSS. STEP_NAME |
  ', is not right-' |
  SNET. TXT
  Of
  <%=odiRef.getObjectName("SNP_SESSION")%> SS
  LEFT OUTER JOIN <%=odiRef.getObjectName("SNP_SESS_TASK_LOG")%> SSTL ON (SSTL. SESS_NO = SS. SESS_NO)
  LEFT OUTER JOIN <%=odiRef.getObjectName("SNP_SESS_STEP")%> SSS ON (SSS. SESS_NO = SS. SESS_NO)
  LEFT OUTER JOIN <%=odiRef.getObjectName("SNP_EXP_TXT")%> SNET ON (SNET. I_TXT = SSTL. I_TXT_TASK_MESS)
  WHERE SSTL. TASK_STATUS = 'E '.
  AND SS. SESS_NO = "<%=odiRef.getPrevStepLog("SESS_NO")%>". »
  AND ROWNUM = 1

• How to insert the web object inside the SCORM package?

  I want to put my own HTML page inside the SCORM package and open it then SCORM-courses will be publish in my LMS.

  So I tried to use web-object in Adobe Captivate and address bar entered page.html.

  Then I published SCORM 1.2 course and rolled my page.html inside this ZIP package.

  After that, I publish this course in Moodle LMS and SCORM-cloud.

  But this course was launched in both systems - page.html does not appear on the slides!

  In this case, I tried to put my page.html inside the SCORM package and after the publication of LMS must be downloaded to LMS as sending to the web server.

  As you can see I try to use the link, but it does not work.

  What I've done wrong?

  Any suggestions?

  If you use Captivate 8 or 9, you can zip the HTML page and insert into Captivate as a HTML5 Animation. This should work for you.

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• Can I buy subscription only Photoshop app and then reload with subscription only application illustrator? It is less expensive than the full package. Is it possible?

  Can I buy subscription only Photoshop app and then reload with subscription only application illustrator? It is less expensive than the full package. Is it possible?

  It is better to buy the subscription of photography cloud creative and unique Illustrator App subscription

  $9.99 + $19.99

  Yes, you can buy according to your choice.

  https://creative.Adobe.com/plans

  Photoshop + bright room and Illustrator

  .

• Map deployed but do not see the database package

  Hello
  
  I have been a card having a flat file as a source and a target table.
  But I do not see the database package. Which object this kind of card would be in the database?
  
  Thank you
  Sozy

  Hello

  When you move the data from the flat file to oracle table, OWB will create the type mapping SQL LOADER in which it will generate the .ctl file and submit the same to Oracle SQLLDR, which in turn make the load.
  It doesn't generate PL/SQL package.

  Thank you
  Fati

• 12 c - BOX WHEN ODI IS in maps

  Hello

  
  I just would like to know is possible to do the following select statement with ODI 12 c mapping in order to load the results into a target table?

  SELECT
  Table1.my_field,
  Table1.ipart,
  Table1.ISEC,
  CASES WHERE NOT EXISTS (SELECT 1
  FROM TABLE2
  JOIN IN-HOUSE TABLE3 on TABLE2.pid = TABLE3.pid
  WHERE table1.my_field = TABLE2.id
  AND TABLE3.typ! = '5004') THEN 0
  WHEN THERE ARE (SELECT 1
  FROM TABLE2
  JOIN IN-HOUSE TABLE3 on TABLE2.pid = TABLE3.pid
  WHERE table1.my_field = TABLE2.id
  AND TABLE3.aid = '001') THEN 1
  2 ELSE
  Flag of the END as the
  FROM TABLE1

  
  Thanks for the suggestions.

  Why don't give you it a try and see if it works :-) Your other option is set up the joins of tables correctly and avoid the need for scalar queries in total that is sub

  Table1 inner join table2 on id

  Table2 left join table3a (first instance of table 3) with appropriate filters

  Table2 left join table3b (second instance of the table 3) with appropriate filters

  your would then assess the NULL state of the relevant fields in your case statement to get the result

• Download DataServer User/Pass/host with ODI Variable to use in the ODI tools

  Hi guys.

  
  

  I was thinking about a way to dynamically modify the ODI tool based on the parameters of a root.

  
  

  So I created a dummy DataServer with host that the IP address of the server I want to reach and define the user/pass I will use to authenticate.

  
  

  

  Then I coded a variable with odiRef.getInfo to obtain this information, but the two results return nothing because this API based on the execution of an interface works. I've not found an API to get these values from a package.

  

  Is there a way to get this base only in a logical schema, such as: odiRef.getDataServerInfo ("LS_OF_THE_DATASERVER", "DSERV_NAME") so that I can use it like this:

  

  Thanks for the help, Giampaoli.

  I've made a few changes based on the post you sent.

  Basically, I used only the tip of the game from the source as the topology I wanted settings and coded the target with this:

  Command on the target

  

  Command on the Source

  

• The export of a variable value of Jython in a Variable of the ODI

  Hello everyone,

  I use ODI for the first time and I have a few simple questions.

  I wrote a Java program 'P' to perform three operations: 'X', 'Y', 'Z '. The program returns a string with the result encoded in JSON format (and never raise an exception).

  Now I have the pot of P.

  In ODI 12 c demo I created with success a procedure with 3 tasks (1 running X, Y of 2nd, 3rd Z). I run P every time a Jython script that loads the jar with some ODI environment options and pass as arguments to the main method.

  At the moment there is executed even if X fails and the Z are executed even if fails. What I need is to check the result of the operation: If the result of X is equal to a certain channel then run Y. If the result of Y is equal to a certain String then run Z.

  That's why I created 3 different procedures, each with a single (jython) task (we run X, a Y, and a Z).

  I created a new package and put in the three procedures.

  My problem is how to connect the three procedures: I need to store the result of an operation and check it before performing the next step.

  I saw that it "Assess the Variables", but how can I store the value in a variable of Jython (string JSON) in a Global Variable ODI?

  It seems that the Options of ODI are unalterable (How to set the value of the variable of Jython Script ODI). Any suggestion?

  I can't use the ODI OS calls. Jython is not strictly necessary.

  Thanks for reading.

  Gianvito

  Oh! Now your example clearly what you want to do then it is much easier. No need to do anything special... just use Jython throughout the whole, since the variables are "persistent session." Like this:

  First proc:

  

  Second proc:

  

  The result of the execution:

  

  Is that what you want?

• Solution for the ODI function call

  Hi Experts,

  I'm using ODI 11 g.

  Currently I use oracle procedures to call a function in ODI.

  just like "Select package_name.function_name from dual" I use this query in the variables of ODI. The output of the function
  I use in the mails from the ODI.

  So, for this... Assume that for any change that I have to go to an Oracle package and change the logic of operation... and then promote this
  production... which takes a moment for me.

  So I want to write this function inside the variable of the ODI and send the output to mail ODI... While I don't need DB side to promote
  the production code on all the changes.

  Please let me know if this solution is good or not.

  
  Thank you
  Lony

  Hello

  in my opinion is good have any logic inside the ODI. But it depends on the complexity of the logic and the frequency of your change. If you change the logic once for the year, it is completely unnecessary to do inside your ODI.

  A good compromise would be to put a step in package_name.function_name in your parcel.

• The charge would be created with the unique package with date id

  Hi all
  
  Thanks in advance,
  
  IAM new to ODI, in my process I dnt know below two constaraints how to do, please help me in this regard...
  
  1. the load would be created with the id of a single lot with the date and
  stamp under the unique number (when the load data from source to target).
  2. HIGHLAND field would have the line number incremented from
  .001 when records are inserted in the table

  30021986 wrote:
  Hello

  Thanks for the reply, my requirement is,
  1.i have field JELN in the target table, in that line number is incremented from de.001 in the table. (Field JELN would have the incremented number line from de.001 when the rows are inserted in the table)

  -> for what I had done using sequenceing odi_sequence craeating, but it will give higher error.
  and the second condition is

  Never use ODI sequence unless you do business with a technology that has no native sequence is
  (eg files). Most of the RDBMS has their own sequence, and you use these alone.
  For oracle, you must use . NEXTVAL in the field mapping. Be sure to run on the target.

  2. when iam loading the data from the source to target a unique batch number must be generated with the date and time stamp (the load would be created with the unique package with date id and + *)
  timestamp in the unique number +) *.

  You can use SYSTIMESTAMP in this area and do not forget to run on the target.

• The family package also has a freel three months trial?

  My mother wants to start a family package for  music. Is there a free trial for the family package as well?

  Hello, Trevortjee.

  It seems you're wanting to know if family memberships for Apple music also provide a period of 3 months free nieprzyda. The short answer is Yes and the steps on how to do this are described in the following Knowledge Base article:

  Join the Apple music on your iPhone, iPad, iPod touch, Mac or PC

  Prior to joining Apple music, back up your music and make sure all your devices are up-to-date. If you want to first a family membership at Apple music, set up the sharing of family .

  When you first join music Apple, you get a free trial subscription, three months by the person or the family. To register, you must enter a valid form of payment, but you will be charged for your membership only after the end of the trial period.

  Take a guided tour of Apple's music.

  Join them on your iPhone, iPad or iPod touch

  1. Open the music application. The first time you open the updatedapp, you see a message about starting a free trial of Apple's music. If you do not see the message, press on for you at the bottom of the screen.
  2. Press Start 3 month free trial.
  3. Select individual or family membership, and then tap Next.
  4. If you are prompted, enter your Apple ID and password that you use with the iTunes Store. If you do not have an Apple ID, click on create an account.
  5. You may be prompted to validate your billing information, but you will be charged until after the end of the free trial period of three months. Add a valid payment method* and click Join.
  6. If you are prompted, accept the terms and conditions.
  7. Artists and genres to choose you like.

  * You can use store credit to pay for your subscription to Apple's music, but you must have enough credit to cover the amount of your first renewal store. Learn how Add the bank credit on your account.
  

  Join them on your Mac or PC

  1. Open iTunes. Make sure you have the latest version.
  2. In the upper left corner, click the music icon.
  3. From the top of iTunes, click on for you.
  4. Click Start 3 month free trial.
  5. Select the person or the family members, and then click Next.
  6. If you are prompted, enter your Apple ID and password that you use with the iTunes Store. If you do not have an Apple ID, click on create an account.
  7. You may be prompted to validate your billing information, but you will be charged until after the end of the free trial period of three months. Add a valid payment method* and click on register.
  8. If you are prompted, accept the terms and conditions.
  9. Artists and genres to choose you like.

  * You can use store credit to pay for your subscription to Apple's music, but you must have enough credit to cover the amount of your first renewal store. Learn how Add the bank credit on your account.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.