In the tables tab stops script

Similar Questions

• Hit the tab key changes the withdrawal. How can I do tab take the cursor to the next tab stop?

  Currently in the latest version of Pages, the tab key changes the line indent. How can I take the cursor to the next tab stop? The document was created in Word format. I work with Yosemite 10.10.5 on a MacBook Pro with 8G of RAM and hard disk of 1 t.

  The removal of default tab in v5.6.2 Pages is 0.5. You have formally the additional tab stops in Text Format: Panel layout, or with your ruler displayed or clicked on it to set the tab indents?

  Pages is not a clone of the word and the Act to translate automatically the Word document to the internal .pages format when opened by Pages - may or may not honor prior model and Word document settings.

• I'm not able to get the value of an element in the region from the table using Java script

  I have a fixation with two columns area, when the user tries to add a new line without having to fill in the line above, then it should throw an exception. It is the custom page and the home region is located at the end of my page so normal exception raises at the top of the page where the end user referred to in the current. I need to go with popup warning. I built a java script in PR

  code:

  OkButton OASubmitButtonBean = (OASubmitButtonBean) webBean.findChildRecursive ("addrow");

  okButton.setOnClick ("javascript: a = document.getElementById ('prompt');" + "alert ('outside ' + (a.value));" +)

  "if ((a.value)! = ") {input = alert ('check' + (a.value)) ;}} else {alert (' inside the else'+ (a.value));} ");"

  The code above works for entering the message text in the header area, but it is does not make any value if the sub-region of table in advance. Kindly share your point of view on this issue.

  

  This code will give you the same ID only.

  Check the "View Source" code generated from the browser.  https://support.Google.com/AdSense/answer/181951?hl=en

  See you soon

  AJ

• Setting width of the table text frame script

  Hello

  
  

  I need to capture my table cells within the "Width of the text frame" option with "Distribute column evenly", when it goes beyond the "width of the text frame. Is it possible by script?

  
  

  by

  hasvi
  

  Hi Hasvi,

  Try this.

  var doc = app.activeDocument,
      _tables = doc.stories.everyItem().tables.everyItem().getElements(),
      _tfwidth, _cells, finalwidthofcell;
  
  for(var i =0;i<_tables.length;i++)
  {
          var currentwidth = 0;
          _tfwidth = _tables[i].parent.geometricBounds[3] - _tables[i].parent.geometricBounds[1];
          _cells = _tables[i].rows[0].cells;
          for(var j=0;j<_cells.length;j++)
          {
                  currentwidth +=_cells[j].width;
              }
          if(currentwidth > _tfwidth)
          {
                  finalwidthofcell = _tfwidth/_cells.length;
                  for(var k=0;k<_cells.length;k++)
                  {
                          _cells[k].width =finalwidthofcell;
                      }
              }
      }
  

  Kind regards

  Cognet

• How do you get the text in the top line of the table to stop forcing text format the same way in the row below.

  I created a table with two rows. I would like the text in the top line is centered and the text in the line below that is aligned to the left. I have no problem when no list (chips) are involved. However, this week, the client has a list of items that have bullets.

  My problems are:

  1. the second row of my mimics table my top row despite not correctly displayed in design mode.

  2. when I try to clear my list of left fleas disappear.

  Please help if you can.

  Here is the link problem: 2015 Spelman women of color Conference

  Here are the previous explosion without the bullets/problem: 2015 Spelman women of color Conference

  Some days I think I understand the basics of HTML, but obviously not on this one. Whenever I try to search, then hard to pull the code to solve this problem, I fail miserably.

  Here is the code for the problem table:

  < b >

  < td width = "296" align = "left" valign = "top" bgcolor = "#F5F5F5" > < table >

  < td width = "269" align = "left" valign = "top" bgcolor = "#F5F5F5" > < table >

  < /tr >

  < b >

  < td colspan = "2" align = "left" valign = "top" bgcolor = "#F5F5F5" > < table width = "500" border = "0" align = "center" cellpadding = "0" cellspacing = "0" >

  < b >

  < td align = "center" class = "alegreyasc" > Top 3 reasons to attend the < br / >

  Spelman College 11th Annual Leadership and Women of Color Conference: new principals in the era digital < table >

  < /tr >

  < b >

  < td align = "left" valign = "top" class = "alegreyasc1" > < ul >

  < li > < span class = "alegreyasans" > learn how to use the technology in many aspects of your life, including the design of career strategies, balancing work/life, community and promoting civic participation skills.

  • </span > < /li >

  < li > < span class = "alegreyasans" > learn more about the importance of diversity in the digital space and its impact on innovation. </span > < /li >

  < li > < span class = "alegreyasans" > identify and examine the skills required and directors of schools new platforms use to build and maintain the success. </span > < /li >

  < /ul > < table >

  < /tr >

  < / table > < table >

  < /tr >

  OK - let's try this-

  -Replace

  table of .mainbox table tr td table tr td tr td {}

  text-align: center;

  do-family: 'Alegreya SC', serif;

  }

  with this--

  table of .mainbox table tr td table tr td tr td {}

  do-family: 'Alegreya SC', serif;

  }

  and this-

  {.alegreyasans}

  do-family: ' ' Alegreya without, without serif.

  color: #666;

  do-size: 16px;

  text-align: left;

  list-style-position: inside;

  list-style-type: disc;

  }

  with this--

  {.alegreyasans}

  do-family: ' ' Alegreya without, without serif.

  color: #666;

  do-size: 16px;

  text-align: left;

  list-style-type: disc;

  }

  Works now?

• Unable to display data for the date where there is no entry in the table

  Hello
  
  I need a urgent, described below:
  
  I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
  (Please ref. The table with data script as shown below)
  
  Now, if I run the query:
  "select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
  It then displays the data for the dates there is an entry in this table. But it displays no data for the
  date in which there is no entry in this table.
  
  If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
  sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
  But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
  « 0 ».
  
  Y at - there no way to get the result I need?
  
  Please help as soon as POSSIBLE.
  
  Thanks in advance.
  
  Create the table script that contains data:
  ------------------------------------------
  
  CREATE TABLE SALE
  (
  NUMBER EMPNO,
  NUMBER OF SALE_AMT
  DATE OF SALE_DATE
  );
  TOGETHER TO DEFINE
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  COMMIT;
  
  Any help will be necessary for me
  
  
  Kind regards

  WITH tab AS
    (SELECT TRUNC(sale_date) sale_date,
      SUM(sale_amt) total_sale
       FROM sale
     GROUP BY TRUNC(sale_date)
     ORDER BY 1
    )
   SELECT sale_date,
    NVL(total_sale,0) total_sale
     FROM tab
     model
     REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
       dimension BY (indx)
       measures(daysdiff,minsaledate)
     main main_model
     dimension BY (sale_date)
     measures(total_sale)
     RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
     ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
  ORDER BY sale_date
  

  using a clause type

  Ravi Kumar

• Two active sessions in the two tabs of the browser - how?

  Hello!
  
  I use custom for logging into my application authentication. It uses an internal table to the verification of user name and password. The rest of authentication is handled by the APEX. Here's my process of login on the login page:
  

  declare
    v_auth_successful boolean := false;
  begin
  
    v_auth_successful := pck_auth.authenticate(p_username => :P101_USERNAME,
                                               p_password => :P101_PASSWORD);
    
    if v_auth_successful then
      
      wwv_flow_custom_auth_std.post_login(
          P_UNAME       => :P101_USERNAME,
          P_PASSWORD    => :P101_PASSWORD,
          P_SESSION_ID  => v('APP_SESSION'),
          P_FLOW_PAGE   => '&APP_ID.:1'
          );
    
    else
      owa_util.redirect_url('f?p=&APP_ID.:LOGIN:&SESSION.');
    end if;
  end;

  My problem is that I can't have two active sessions of simoultaneous in two browser tabs. When I login in the app in the first tab, I can navigate fine enforcement. But as soon as I open a second tab and a newspaper in the application (with the new session ID), the first tab stopped working - I get redirected to the login page. And when I log in again, the second tab not working anymore... etc.
  
  Example can be seen here: [http://apex.oracle.com/pls/otn/f?p=47326:1 | http://apex.oracle.com/pls/otn/f?p=47326:1]-just open this link in both tabs and connect (any name of user and password will do)
  
  Someone knows how to fix this? According to me, Miss me something (in my authentication scheme?)
  
  
  Thank you
  Swear

  I think that the OP's question is can this behavior be easily extended to applications that have been built in the APEX, not only the builder himself.

  This would require a sentinel of custom page common to all applications that conform to a particular session of the management rules set, regardless of those who are. The exact requirements (functional specifications) are too vague for me.

  Scott

• Size of the table only includes not Keynote - can not enter directly px

  I inserted a table on a slide, and he made two unexpected things:

  1. it will not allow me to directly enter a width of table in pixels - as soon as I enter a value, it returns to the original value. The only way I can change the size of the table is with the up/down arrows, essentially pushing a pixel at a time.

  2. when I add an additional column, rather than tighten it in the width of the table by adjusting the size of the existing columns, it blows the table out of the slide area, and I have to manually resize the table to accommodate.

  I have looked through all the parameters of the table and just cannot find why it behaves in this manner, which is different from the other tables I've created in the past.

  1. You are right. Selecting the Table tab and reduce line and column values will shrink your table, but the table resizing is not supposed to work this way.
  2. Control-click or two fingers press the alphabetical table header and select Add column after from this menu. The new column is added in place, and the other columns shrink and walk left to accommodate the new column, while the table itself does not move.

• How can I jump tab stops to read only fields?

  Hello

  I have created a form using Livecycle ES2 and have a Q.

  I have a Yes and no box that, once Yes is clicked does another check box and the date field read-only. When I click No., they are open for data entry. It works fine, but I found when I click on Yes and then press tab, it always stops on the deposits of only reading.

  Logic and well... very well anything else I did know the fields.

  Is there a way to blow up the field if it is read-only? I guess it would be in the sense of when the field is entered and is read-only, it will automatically go to the next tab stop.

  Any suggestions?

  Try, yourField.access = "protected" instead of "readOnly"

  Kyle

• JSF Panel tabs page and the question of the active tab

  I have a question about how to accomplish something in the ADFBC/JSF application.
  
  Scenario:
  
  Page A - have Panel tabs with 2 tabs: X and Y. W has a table and A table.
  With the click of a row in the table, we sail to
  Page B - it has a Submit or Rollback button that takes back us to A Page.
  
  During the passage of the X Page B tab - and it works very well.
  During the passage of the tab Y and Page B - tab X is still selected, but the table tab is loaded. Once I have manually switch to the tab, then back to tab X, the app works well.
  
  How can I activate the right tab depending on which was active when I went to Page B?
  
  (I #{adfFacesContext.postback == false} defined on the two iterators of table to refresh the data in A Page when an action was made in Page B)

  Hello

  I think that [url https://forums.oracle.com/forums/thread.jspa?threadID=2220190] here is your solution

  You can also visit the link below.

  http://jobinesh.blogspot.com/2010/12/programmatically-disclosing.html

  ~ Abhijit

• stopped script (still another script) when you turn on the computer

  Almost everytime I start the computer, I get the error message. Script stopped, do you want to retry the script or abandonment of it.
  The scripts are always different. And until it is cleared (sometimes a few of them) the functions offline is very slow and I can't go on the internet.

  Hi HennieK,

  1. did you of recent changes on the computer?

  2. what browser you use on the computer?

  3. what happens when you try the Internet?

  Disable script debugging in internet explore and check if it helps.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• "Receive the error message" a script on this page may be busy, or it may have stopped responding.

  Original title: Running Scripts

  I have scripts that run and he asks me to debug or stop Scripts.

  I don't know their origin or even what they are.

  I didn't ask for them, and would love to disable them.

  They operate slow down my computer.

  I do not notice that they start to any particular application.

  Thank you!

  Hello

  Thank you for being part of the Microsoft Community.

  What browser do you use to access Web sites?

  Follow the steps listed below, if you are using Internet Explorer:

  Method 1: Verify that Active Scripting, ActiveX, and Java are not blocked by Internet Explorer.

  a. start Internet Explorer.
  b. on the Tools menu, click Internet Options. If you don't see the Tools menu, press Alt to display the menu.
  c. in the Internet Options dialog box, click the Security tab.
  d. click on default.
  e. click on OK.

  Note: ActiveX controls and Java programs are disabled in the high security level in Internet Explorer.

  Method 2: Disable the Script Debugger.

  Perform this method if the problem only occurs in Internet Explorer.

  a. open Internet Explorer desktop Version.

  b. on the Tools menu, click Internet Options. If you don't see the Tools menu, press Alt to display the menu.
  c. on the Advanced tab, click to clear the display a notification of every script error box, and then click OK.

  Back to us for any issues in the future. We will be happy to help you.

• SQL more how to stop script after the exception of the DDL

  Hello

  I have script .sql, which I managed by SQL * more.

  Some migration of data and database structure changes were made in the script.

  So, I use a lot of distinct calls:

  @script_name.sql

  @script_name_1.sql

  @script_name_2.sql

  ...

  Some of the scripts contains DDL as create table or column.

  contains some declare blocks (DML).

  Is it possible to stop the script after an exception has occurred?

  Thank you, Olga.

  Hi, Olga.

  You can use the SQL * more order

  WHENEVER SQLERROR EXIT

  to tell SQL * more to stop the execution of orders and immediately disconnect after any exception SQL is triggered.

  I don't know of anyway to stay connected, but to stop script execution, after an error.

• I want to add tab stops to the cross-reference format to make my OCD, a solution of a single click, but the format never comes out right and using the tab key in the window of the dialog box to move the cursor to the next window.

  When you try to format my references I would add tab stops so that the format for the TOC works with the cross reference.  For example my format on the pages of reference is

  < $chapnum > - < $paranumonly > < $paratext > < $chapnum > - < $pagenum >

  With tab stops before the chapnum, between paranumonly and paratext and the next chapnum.  If the final result should look like

  4-16 speed vertical digital - primary Mode... 4-28

  Help?

  In the reference page, add a \t where you want a tab to be, i.e. \t<$chapnum>-<$paranumonly><$paratext>\t \t<$chapnum>-<$pagenum>

  Then, make sure that the format of paratag has the tabs tab placed at the correct locations.

  When you re - generate the table of contents, you should get the desired effect.

• How to set up a tab stop after the withdrawal of right

  Hello, I hope someone is able to help me

  I have a table of contents with titles and descriptions that spans 4 lines, and I need to add a page number at the end of the last line with the first point, BUT keep left and right text margins justified and the number outside this range.

  See the picture I have attached so it is easier to understand what I'm after.  I need the 4 should be harmonized where is the tab stop.

  

  Is this possible?  This works well in the work (set up exactly like that) but I can't make it work in ID5.

  Thank you!

  Nano

  Of course, you just set up a hanging indent the last line on the paragraph style

  Like this