In Windows 7, when I use the bridge it cannot locate libraries and images here?
In Windows 7, when I use the bridge it cannot locate libraries and images here?
Libraries in Windows7 and bridge 4.0.
Tags: Bridge
Similar Questions
-
When I use the truncation tool, select a zone and press return it removes everything except for a single pixel. This just started today. CS5, Windows 7. I tried to reinstall CS5 and who did not help. I am trying to set up a new computer and installed Photo Shop CS5 on it earlier in the day. Maybe it has something to do with it. But until I get the new fully configured machine I still want to continue to work on my current machine, which is where the problem is happening.
Hi haroldschlegel,
Please try resetting the cropping tool
Restart Photoshop once done and see if that helps.
Kind regards
Assani
-
Windows crashes when I use the new modem.
I just started using the new modem broadband model Maxis Huawei E1762. After some time using his accident from my window. Varies according to the duration before crashing immediately in a few hours. Help...
Hi Azmahamd,
The latest drivers for Windows Vista are installed? Visit the modem manufacturer to check if newer drivers are available, if they are then install them.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com
-
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Transformation nodes no longer appear when I use the online tool
Transformation nodes no longer appear when I use the online tool.
They used to show on the square shapes and ellipses and when I open old files with lines they always show on them too.
Tried to hide and display the bounding box and switch between the selection and direct (black and white cursor tools) but can't get it to show the normal 8 knots.
It shows only a knot at each end and when I select and drag the tool Selection normal (black slider) it is the same when I use the direct Selection (white slider) tool and is not right.
Someone at - he seen this before?
It is not possible.
But you can describe your workflow and how you would need commands selection to work.
Use this form for your requests for telephone communications:
-
When I use the mail merge with excel file, after I press ok of the progress bar indicates "NaN", mail project window crashes. My file is in the correct format and small size (4-column 4 raws). I use an English version of thunderbird after accidentally, I installed one in my tongue.
I am attaching the screenshot
I solved the problem
has been st@pid excelI created a CSV file in openoffice calculator and everything went smoothly
-
When I use the files and settings between XP and 7 Transfer Wizard files on XP removed or will I still have the original as files?
The files and Settings Transfer Wizard won't work on Windows 7, you must use Windows Easy Transfer. But in both cases, the original files are copied only - not deleted. They remain on the source computer.
-
help XP Activation
Accidentally, I used my xp professional on my computer which had xp family on it. my computer says I need to activate windows, but when I click the icon, nothing happens. I can't go back to xp home, he beginning to install on the partition. How to activate windows when I can't get to the prompt?http://www.Microsoft.com/genuine/diag/
Try this link for activation...
-
I am changing the product windows on a machine key recently image. To do this I use the Windows product key update tool. Usually, when I use the tool all right and there is no problem; However, in this case it I cannot enter certain keys as in a, e, i, o, u, s, etc.. I tried copy and pasting from Notepad and it sticks only certain letters like h and q.
Someone at - it suggestions/ideas on how to solve this problem without having to re - install Windows?
Sorry, we had used the wrong key for the version of the o/s.
-
Windows Mail stops when I use the spellchecker
Windows Mail sometimes/often stops when I use the spellchecker. There is no obvious reason or a consistent trigger I can find. I lost the email I typed. I would prefer not to have to record every email in my drafts before I check spelling it. How can I fix?
Hi Holnee,
Looks like you can have something in the background, interfere or that we would need to check the system for any problem files.
The first thing you can do is to check your system for any possible infection such as a virus or spyware. Do a full scan of the system and see if you find infections and if yes which solves the problem that you are experiencing.
The next thing to do would be to put yourself in a situation of clean boot to ensure that no background program interfere.
- Open the Start Menu
- Type msconfig in the Search box and press enter
- Click on continue in the UAC prompt
- On the general tab, click Selective startup.
- Under Selective startup, click on to clear the Load Startup items check box.
- Click on the Services tab, click to Select the hide all Microsoft Services check box and then click on disable all.
- Click OK.
- When you are prompted, click restart.
- After the computer starts, check if the problem is resolved.
If that still does not solve the problem then let's you run the System File Checker. It will scan all protected system files and replaces incorrect versions with appropriate Microsoft versions.
- Open the Start Menu
- Type the command prompt in the box start the search
- Right click on command prompt and select run as administrator
- Click on continue in the UAC prompt
- Type the following command and press enter:sfc/scannow
Please let us know if this solves your problem, or if you have any questions.Matt
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Do I still need to run the Windows Firewall when I use Norton360?
Do I still need to run the Windows Firewall when I use Norton360?
Hello
A firewall is software or hardware that checks information coming from the Internet or a network, then it blocks or allows it to pass through your computer, depending on your firewall settings.A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.A firewall is not the same thing as an antivirus program. To help protect your computer, you need a firewall and an antivirus and anti-malware program.
Norton 360 from Symantec's all-in-one security service that protects your computer and your data against today's Internet threats.Norton 360 can be functioning as an antivirus, firewall, or offer according to your settings.We recommend that you only have an antivirus and a firewall on your computer, the choice of what antivirus or firewall is yours. -
When you use the Windows XP Mode integration, it fails; continues to try again and finally I cancel it. The same newspaper for Virtual PC on the host computer has the following error message: Windows XP Mode integration error 'failed to connect in place inside the "Windows XP Mode" VM on channel 0 on the... named pipe endpoint XP, TCP port 3389 with the 0x8007274c error mode. This error occurs every time, but I don't know why he is successful a few times and sometimes fails. This question was in another post and mentioned the removal and resettlement components of integration, which I've tried, but it did not help. I also checked that I have the latest version of the integration components (v. 14.1.7600.16403). I have a separate instance of Virtual PC that I brought over my old XP machine and it was never a problem with integration. The problem with the image in XP Mode occurs also, regardless of whether or not the other Virtual PC image runs. Only the image of the XP Mode has this problem. I suspect it's perhaps a conflict of TCP port in the named pipe, but if so, I don't know how to solve. Thanks in advance to anyone who might be able to offer advice.
Thanks for the reply. I tried to reinstall the integration features in the past, but the problem has come back at a later date. A few days after I posted this request for assistance, I needed to log out of Windows 7, so I hibernated the XP Mode image. Then, I opened a session in Windows 7 and thought I'd give it a try once again, and it worked this time! I did nothing special. So hopefully that will happen in the future, just as it went and on the past few months. Enjoyed your attempt to offer advice, however!
-
What is the name of the font used by Windows 7 when it lists the files etc in a folder?
I want to change a text Notepad to the same font that is used by Windows 7 when it lists the files in a folder... What is the name of the font?
Hello
Windows use Tahoma as default font in Windows Explorer. You can try to use the Tahoma font and check if you like that.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Message box color settings disabled when you use the dialog "Windows color and appearance".
When you use the configuration dialog box 'Window color and appearance', why are there color settings invalid? I want to remove the default 'Pastel Pink' value that I find unacceptable.
I can switch to "Classic Windows" that uses no pastel pink color, but "Classic Windows" does not support "Aero Peek", and the windows look pretty tired. You can only take "Classic Windows" for many years.
Color settings are disabled for: buttons, Message box, title of Palette, scroll bar.
Help, please!
Me too I'm frustrated by that. Found the old windows with very honest XP environment. I used the advanced settings, but has not found a way to save the changes with a label, so I knew that the changes you made. It is just Frigging trial and error and very frustrating.
Why are there no way to return either to the default value (not found a default label) or save the settings changed under a name? It is a productivity KILLER.
Hello
Interface user of Windows 7 is theme based. The colors are defined by the theme.
You still have many color options that can be used to change the colors.
Right click on the desktop and select Personalize. Click on the color of the window at the bottom of the window box.
You can select one of the colors in the boxes colored at the top.
Adjust the intensity of the color with the cursor.
Click on the color down mixer and you can a lot of variations on all the different color choices.
I hope this helps.
Thank you for using Windows 7
Ronnie Vernon MVP -
Identification of customer's Windows 7 NFS UID GID information
I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS. I am able to properly connect Client NFS software by a 3rd party on the NFS server. However, when I use the Client for NFS provided by Windows 7, I am unable to connect. The \\ip address\share Z: mount"command fails with the error code"the path not found network ". I can't do a ping of the computer running the NFS server.
The NFS Client operating system: Windows 7 Ultimate, 64-bit
Data captured by Wireshark
MOUNT V1 EXPORT call 3rd party client
Identification information Flavor: AUTH_UNIX (1)
Length: 32
Stamp: 0xc7065970Machine name: PC
UID: 1000
GID: 1000MOUNT V1 EXPORT appeal of the NFS client
Identification information Flavor: AUTH_NULL (0)
Length: 0It seems that the credentials of NFS Client are not correct. How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?
Hello VDAEMP,
As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
TechNet - Windows Server
Thank you
Maybe you are looking for
-
iMovie does not start new project
At the start of new projects in iMovie, he made this mistake. I can press on 'New film' but just after him named (is to ask for a name), the error appears. In English it say something like 'action could be done. There is no additional information on
-
How to create a strictly typed control refnum using LabVIEW scripts
I want to use LabVIEW to create a strictly typed refnum control that is bound to my custom control (a defined cluster), but I'm not familiar with scripts and can't see how to do it. If I create a new object of VI, with Refnum of control as the Style,
-
OCR for Officejet Pro 8600 8.1 on windows software
I have an Officejet Pro 8600 that I installed on two computers. When I installed the HP software for this printer on my PC Windows 7 it included I.R.I.S OCR software. When I installed the software on my PC for Windows 8.1, there not. I went on a HP d
-
my CD player is not playing some CD and shows a CD blank, even when it is contained in the CD
-
Logical layout of Equallogic storage with new members pools
In each of our server rooms, we currently have 2 Equallogic storage pools: K 10-1 GB (2 X 6100 X) K 7-1 GB (2 X 6100F) We just bought an additional PS6100E and a PS6100XS for each server room. Existing 6100F bays that we include 3 TB drives, and a ne