not able to read CDs

Similar Questions

• Not able to read files audio wma

  I myself had this new cool device and everything is working fine beside it is not able to read files audio wma.
  It works without any problem on my Samsung android phone, but on my Slate7 it says format not supported in specifications indicates that it is supported.
  I installed the same player that I use on my Samsung android phone, any suggestions I should do to fix this?

  To my knowledge 4.1 Android doesn't have the necessary codec to play default WMA files. Please see the compatible audio formats listed by Android developers:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  However, for me MXPlayer/VLC works to play WMA files. You can try this one, and there is no harm to try. Two of them are available on PlayStore. You can uninstall them if you don't like them or if they do not meet your needs.

• Stor.e TV 1.5 TB - not able to read .avi files

  I transferred .avi files from my computer on Stor.e tv and for some reason the icon on the left is a question mark instead of the usual.

  Not only that I am not able to read .avi files.
  The strangest thing happened only in some of the files (4) I was transferred.

  Can someone please help?
  Thank you.

  Hello

  Have you tried to repeat this procedure?
  Delete the files copied to the HARD drive and copy the files once more.

• Qosmio G20 is not able to read a cd after burning

  Hello

  I need help please.

  My laptop just came back from the center of toshiba. The problem is, that I can burn a cd, but after I reinsert the laptop is not able to read. It always says E: / is not accessible incorrect function. On another pc, the cd can be read perfectly. Toshoba Center says it's a software problem and we should use the recovery disc. We did this, but it's always the same.
  Please can someone help?

  Thank you

  Read your ad I didn't understand what the service does exactly, but it's really odd if this occurs after the installation of clean operating system with recovery DVDs.

  Have you installed an additional burning software?
  Have you tried burning different things on different blank media?

  Sorry, but it is not possible to give a precise answer. Tell us a little more of this.

• Tecra A3 - 152 - not able to read CD - R (or CD - RW), burned by itself or another PC

  Hello

  My TECRA A3-152 offers the CARPET * a DVD-RAM UJ - 831S player (1.40 firmware version) with the Microsoft (dated the 1.07.2001) 5.1.2535.0 driver
  The laptop is not able to read the CD - R or CD - RW engraved with any other PC (or alone). The CD is reported as empty.

  However, the reader is able to read commercial CD - R with SW or sounds or other stuff.
  After several hypotheses about the SW problems or compatibility issues, I intend to replace the drive with another.

  Any suggestion?

  Thanks - regards
  Antonio Giarrusso

  Hello

  Maybe it s only a problem of compatibility. In my experience not on each CD or DVD is compatible. I mean that not every CD manufacturing is supported by the firmware and so this question might appear.

  But let's try some common tips.
  First of all, I would recommend delete Sonic record now and the DLA.
  Then restart the computer and enter the registry.

  1. in the registry editor, expand my computer, and then expand HKEY_LOCAL_MACHINE.
  2. expand SYSTEM, and then expand CurrentControlSet.
  3. expand Control and class.
  4. under category, click on {4D36E965-E325-11CE-BFC1-08002BE10318}.
  5. in the right pane (topic area), click UpperFilters and delete. Click then click LowerFilters and delete is also.
  6. click on Yes to confirm the deletion.

  After this procedure, restart the laptop and try to read the CD

• DVD-ROM not able to read any Dvd or cd...

  Hi, my dvd rom is not able to read any disc, I can see the drive in my computer, when I insert a disc, it runs for the first time, the light shows and thn it stops completely, and when I click on the dvd icon in my computers it drive ejects, when I tried to google my problem I got to know tht, this may be due the updates for vista and the solution was to remove the upper filter or lower in the registry, I tried tht so but thn too the problem persists, try wht should I do?

  try to use the DVD rom in another IDE or SCSI port in your computer.

• UTL_FILE.get_line not able to read large files...

  Dear all,

  UTL_FILE.get_line is not able to read data from file. can you suggest me to fix this problem...

  Here is my code;

  declare

  l_file_handle UTL_FILE. Type_de_fichier;

  l_input_line varchar2 (6000);

  Start

  l_file_name: = 'abc.csv ';

  l_path: = ' / u02/R12UAT/apps/apps_st/appl/XXSES/12.0.0/bin';

  l_file_handle: = UTL_FILE. FOPEN (l_path, l_file_name, 'R', 32767);

  loop

  UTL_FILE. GET_LINE (l_input_file, l_input_line);

  fnd_file.put_line (fnd_file.log, l_input_line);

  end loop;

  UTL_FILE.fclose (l_file_handle);

  end;

  After reading a few lines I have a get the error;

  ORA-06502: PL/SQL: digital or value error: character string buffer too small

  I have to read data from file with UTL_FILE. Do not use SQLLDR

  Thank you.

  Kind regards

  Ravi.

  Your call to FOPEN() function specifies a size of 32K maximum line. When you call GET_LINE() without specifying the number of characters to get, Oracle will therefore assume you want to get 32K characters. However, your stamp, L_INPUT_LINE, is defined as VARCHAR2 (6000). That is, it is much too small.

  The solution is to call GET_LINE() with the third parameter set to 6000.

  BTW, you can also set a condition of release on the loop.

• PS is not able to read the files from my Olympus OM - D E - M1 camera

  I have an old Version of Photoshop, CS3, Version 10.0. Now, I bought a new camera, an Olympus OM - D E - M1, and the PS is not able to read the files. Can I download a few extend camera raw?

  Per-Erik Pedersen

  Hi Peders,

  Thanks for posting on the Adobe forums.

  This camera is supported by Camera Raw 8.2, which is available in Photoshop CS 6. Please check the following KB Articles:

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  Kind regards

  Sandeep

• XNET Executive session: read frame vintage - not able to read i / c frames

  Hello

  I created Veristand Custom Device for RT PXI monitor Xnet CAN of my Test frameworks to the UUT. I use CAN map 8513. I have a problem that I could see images from to WEAR it, but not able to see the (outgoing) frames, I send to USE.

  But since my host PC (windows pxi) I used the monitor Bus Xnet - in remote mode - to monitor CAN interface in this RT PXI, when bus Xnet monitor device custom above also starts showing outgoing executives. Please help me with this.

  In the custom device - create Xnet session using '.vi XNET Create Session (frame Input Stream)' and 'reading XNET (Raw image) .vi"to read CAN traffic.

  A slightly modified version of 'https://github.com/NIVeriStandAdd-Ons/XNET-CAN-Bus-Monitor-Custom-Device' to see frames the two inbound/outbound.

  With the help of VeriStand 2014

  The people on our Board of Directors VeriStand may be able to help a little more with making a custom device.

  http://forums.NI.com/T5/NI-VeriStand/BD-p/440

  You don't know how it would work in VeriStand, but ownership XNET Echo pass? is probably what you want to use.

• WMP player not able to read files on fuse + after Real Network update

  In the evening, I received a noticed that there was actual update available. I installed it.  My fuse + was connected at the time. When it was done the options showed to read by the drive and the external card.  I tried to display to use it, but it seems to not work.  Windows Media Player also seems to not work.  I disconnected my player and plugged in.  Still not able to view files with WMP.  But, then was able to display using Real.  I don't like the actual display.  Was able to view files with explores.  Deleted in real.  Now able to see the player of fuse.  Only able to see 3 pictures on the external card.  I have 7 GB of data on a 8 GB card.

  Could be something else, but now seem to point to the actual update.

  I have a second player who still works with WMP.  I could see the files on the card with WMP when installed in my second player.  When I put it in my original drive is back to normal.

  Back to normal with no real software.  I liked Real SP.

  the real update may have changed the accociations with the "rocket" since it is try plugged in. uninstall the "rocket" in the Device Manager and then scaning for hardware changes. This should refreash installation.

• Not able to read the WSDL on the server meets premature EOF

  Hi all
  
  I am facing problem while accessing a web server Service. Here is the clear view on this subject.
  
  I created a simple process of SyncBpel in a composite and deployed on the server and it works fine. Later, I created an asynchronous bpel process in a composite and in external reference I dragged a web Service and imported from the url of the wsdl for the SyncBpel server and wired the process of Asynbpel to webserive.
  Now here I am faced with a particular behavior that I'm not able to trace it.
  (1) for the first time when I import the url of the syncBpel from the server I am not faced with an error and it works well as expected, but when I close the Jdeveloper and open it I am not able to use the web Service, and it is said that "not being able to read the WSDL of the EOF Server premature encounter."
  (2) when I close and open the Jdeveloper, I can see the url for the WSDL imported into the Web server is changing http://stcfmw03.satyam.com:8021 / soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep? WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
  (3) when I open and see the url http://stcfmw03.satyam.com:8021 / soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep? WSDL I can see the soap as address * < soap: address location = ":8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/ http://stcfmw03.satyam.com > * "
  
  I do not understand why the end of SOAP contains "* soa_5cfb8416-c106 - 40 has 2-a53b-9054bbe04b9c" and this kind of url for soap address happens to the bpel process which I am on the server deployment.
  
  I checked the in Jdeveloper where webproxy is uncheck and the server is also up, but still I am experiencing because of the mistake of reading.
  
  Can someone please help to resolve the issue.
  
  I am using SOA 11 g 11.1.1.5 and Jdeveloper 11.1.1.5
  
  
  Thank you very much.
  Tarak
  
  Published by: user11896572 on January 17, 2012 17:22

  Hello

  When a service is not deployed as a 'default' on soa-infra, we see characters such as-* soa_5cfb8416-c106 - 40a 2 - a53b - 9054bbe04b9c appended to the end.  It is better for the service references that will be deployed as default of all time.

  A service can be defined as a default value either during deployment, or by setting it manually on the em console.

  Thank you

• Not able to read a DVD

  iamnotabletoplaymydvd, why

  IAM not able playmydvd

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  Good luck...

• Combo DVD/CD DVD drive don't read not more, still reads CDs

  I just popped a DVD in a CD/DVD combo drive that I use for years and he refuses to acknowledge that there is nothing on the disc.
  It also seems to take a lot of time to ride.

  I tried Device Manager and the "driver update", but it says that I have the best driver.

  I use this drive for CD-RW/DVD-ROM combo for years and there has not been a problem. I tried several DVD-Rs serious and two commercial DVD movie discs and I get the same results as in this picture
  
  However, I have also tried several CD - r both music and audio and he recognizes them perfectly.
  I also tested the DVD in my computer Windows 7, and he recognizes them without problem. I was able to open a text file on the data DVD and see a few seconds of a film before I closed it.

  I don't remember the last time I watched a DVD movie, and I think the last time I used a DVD on this computer was when I played Gate II of Baldur's, which according to the files recording was in June since I played something on CD instead.
  I only burned both DVD of Baldur Gate I, II, Planescape Tormenet and Final Fantasy VII and VIII of the CED for this old computer (it came with Windows 98SE, it is NOT a new system), so it is not difficult to determine when I finally used a DVD on it.

  I have not noticed problems in using the drive as a CD drive, but haven't used the cd burner appearance or the appearance of DVD player in several months. I generally use DVD data on a newer Windows 7 computer and only use it for a few old games or music that normally use the CD, even if it's the main goal is to share my parallel printer with the new Windows 7 system that does not have a parallel port and a central server for my curriculum vitae cover letters and anything else I might want to access it from my modern desktop or laptop computer.

  I think it was more of a hardware issue, if it wasn't for the fact that it is reading CD without problem.

  P.S. I broke out the CD/DVD cleaner lens and it has no effect.

  Hello.

  As the PML said readers use different lasers for different drives.  I encountered this problem several times and replace the drive is your only option.

  See you soon.

• Not able to read messages in Windows Live Mail

  Original title: I have Windows vista and my window mail was slow...

  Hello, I hope you will be able to help me.

  I have Windows vista and my window mail was slow, and most of the time does not
  So I delete several messages in the database and I find myself with the result that I could not read one of my posts.
  I download service pack 2 and windows live mail and import my mail the window messages and hard, it might solve the problem but no I still can't read one of my posts and it's slow and unresponsive.
  Thank you
  Michel Auclair
  E-mail address is removed from the privacy *.

  Hello

  The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any further assistance.
  http://windowslivehelp.com/product.aspx?productid=15.

• Not able to read the wsdl file while initiating the process

  I was able to deploy BPEL processes in the Production environment without any error. At the moment that I clicked on "Start" in Console of BPEL, he threw under the exception:
  
  
  I tried to access http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl directly and I was able to access the wsdl page.
  I looked in my code given namespaces (http://schemas.xmlsoap.org/wsdl/ "namespace or the namespace" http://www.w3.org/2004/08/wsdl"), but he was not present.
  I did redeploying several times without a bit of luck.
  
  There are other BPEL process installed on the server. Here are the differences:
  1. I am start my process BPEL using the BPEL Console, others do so with some clients in java.
  2 exception watch URL wsdl to be http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl containing "_". ("_XX_BPEL_INTF_MON.wsdl") Although it is without "_" (XX_BPEL_INTF_MON.wsdl) under the section of the WSDL location. However, I can access both using the browser.
  
  While everything works well in the DEV environment.
  
  Rescue me.
  
  
  Complete cycle of Oracle BPEL Process Manager
  An unexpected error occurred during the execution of your request. This is probably related to a defect in the product, Oracle BPEL Process Manager. We apologize you can post the error on the OTN forum and we will respond as soon as possible.
  
  Attachments:
  
  Update information:
  Oracle BPEL Server version 10.1.2.0.2 Build: 2196 construction time: kill Jan 10 12:31:53 UTC 2006 Build type: release the tag Source: BPEL_10.1.2.0.2_GENERIC_060110.1200
  
  
  Exception message:
  [javax.servlet.ServletException] α wsdl reading failure. Cannot read the wsdl to 'http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl', because ' WSDLException: faultCode = INVALID_WSDL: document: http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl is not a wsdl file or does not have an element root "definitions" namespace "http://schemas.xmlsoap.org/wsdl/" or the "http://www.w3.org/2004/08/wsdl" namespace. " Make sure that wsdl is valid. You must start the server of OraBPEL, or ensure that the related bpel process is deployed correctly.
  
  
  Trace of the exception:
  javax.servlet.ServletException: cannot read the wsdl. Cannot read the wsdl to 'http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl', because ' WSDLException: faultCode = INVALID_WSDL: document: http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl is not a wsdl file or does not have an element root "definitions" namespace "http://schemas.xmlsoap.org/wsdl/" or the "http://www.w3.org/2004/08/wsdl" namespace. " Make sure that wsdl is valid. You must start the server of OraBPEL, or ensure that the related bpel process is deployed correctly. at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:595) at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:537) at _ngDoInitiate._jspService(_ngDoInitiate.java:438) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824) at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:121) at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:267) at _displayProcess._jspService(_displayProcess.java:792) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222) at com.collaxa.cube.fe.DomainFilter.doFilter) DomainFilter.java:152) to com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663) to com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) to com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830) to com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224) to com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133) to com.evermind.util.ReleasableResourcePooledExecutor$ (ReleasableResourcePooledExecutor.java:192) MyWorker.run at java.lang.Thread.run(Thread.java:534)
  
  Thank you
  Nawnit
  
  Published by: user649251 on December 9, 2008 08:53

  Think something is stuck in the cache. I would cancel the deployment of the process of the console, then I bounce off the application server, and then redeploy.

  If this does not work, perform the same steps but after you cancel the deployment of remove the code from the file server bpel deployment. I forgot when this is in the 10.1.2.0.2 version but it will be in the House of bpel. If you do an ls - a it's a file hidden under unix. The file name will have lost garbage with the process name in the name. This should eliminate any past existence.

  see you soon
  James