In Windows 8, audio only works on youtube.

Similar Questions

• to install the 4 gigs, but Windows 7 seems only works on 2 GB RAM?

  I recently installed a new hard drive 2 TB with a new operating system windows 7.  My pc has 2 GB for a long time and that I was going to go to 4 GB, but when I try windows 7 does not start. It works very well with my old ram, but hate the new ram, although it will run one of the single stick 2 gig. Is there a way to get win7 to run on 4 gigs or am I S.O.L.?

  -Just to clarify - you said - "if it runs one of the only stick 2 gig.
  You initially only a strip of 2 GB of RAM?
  Is the new stick exactly the same as the original key
  -Motherboard and RAM mfg will ensure never compatibility of one (or two) of stick of extra RAM to another brand, or model. Often the RAM works, but there are various reasons to reduce performance, and in certain cases matched miss RAM will not work.
  For this reason they mfg RAM in pairs, or kits.
  The best chance of success and maximum performance are if the RAM has the same speed, latency, and voltage
  For example - DDR3 1600 MHz @ 9,9,9,24 - 1, 5V.

  If you have had the machine for a long time try cleaning the RAM slots with a small brush.
  They may have dust is blocking some of the contacts. I had it just happens this
  week when adding two other glue to an old machine.

  Also check that you are using the slot for the stick of extra RAM if you had one before.
  Most motherboards have different colorful locations in order to identify 'pairs '. Some motherboards are configured
  If you ignore a slot when using two sticks, while some are set up to use two sticks, side by side.

  .

• Windows media player only works, como lo various

  intento produce a file of musica y no me responde, me error UN da.

  appears y desaparece in a Flash.

  Alberto Dantegirela,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
   
  Thank you

• After you download an update from Windows, my audio device stopped working.

  original title: no audio device is installed

  After an update of windows, my audio stopped working.

  I have the cd for my motherboard and installed the driver put it does not appear and all I get is no audio device installed

  I do not use speakers on this computer, I installed with audio sharp screen.

  any suggestions... I do a system restore?

  I use windows vista 64 bit on this machine (at home)

  The motherboard is a classic series intel DG31pr

  4 GB ram corsair

  other than the update it worked very well...

  Hello

  1. what was the number of KB (Knowledge Base) of the update?

  2. at the Vista service pack update?

  Click on the link below, so wasn't the update of Windows Vista Service Pack.

  Information about audio device drivers that are known to cause problems when you install Windows Vista service pack

  Hope this information helps.

• Audio Skype works only on Dell place 8

  My place 8 a 4.3 Android Dell

  The audio on all applications, I've tried seems fine except for Skype.

  About Skype, audio only works when headphones are connected.

  Without the helmet, I don't hear not echo call test and it doesn't seem to hear my voice.

  Any suggestions?

  StarMay7,

  Dell venue 8 (3830)

  Android version 4.4.2

  Echo enter the test does NOT work, but I talked on Skype to a friend without any problem.

  Rick

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• I do not see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not working, the video is blank (black) all, someone can help

  I don't update or download anything, so today, I can't see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not work, the video is all blank (black).
  When I restart my PC again the video can work just first video, then when I see another video site it's all black... (but its still working)
  can someone help me?

  Hi splingun,

  We have a section of fixing Facebook and YouTube. The black screen seems expressly included in the list of the articles I linked to you.

  Hope this helps!

• Windows Movie Maker plays audio only, from video files downloaded

  (I see other, similar types of questions about my problem, but none that fits 'exactly'.  So here we are...)  Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer.  Files saved as .mpg files.

  When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).

  I used the 'compatibility', put options different filters turned off. but this does not work either.

  What should I do to solve my problem (and subsequently, to play these videos)?

  (I see other, similar types of questions about my problem, but none that fits 'exactly'.  So here we are...)  Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer.  Files saved as .mpg files.

  When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).

  I used the 'compatibility', put options different filters turned off. but this does not work either.

  What should I do to solve my problem (and subsequently, to play these videos)?

  =====================================
  Movie Maker has problems of compatibility with .mpg
  conversion of files... files in .wmv format .mpg
  before you import into Movie Maker may be your solution.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your clips .mpg video on the
  main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  More info... This article treats your
  question of ' audio only ':

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker - Audio only, which plays in the exported project

  Hello.

  I did a project in windows movie maker with video and audio files. Project perfect cheek (the two audio/video playback) in windows movie maker when I am in the phase "creation/editing. When I export it and save the project as a. MP4 or. WMV file and try to play in Windows Media Player, Quicktime or VLC, as the audio of my theatre project. There is no video. However, when I play the other. MP4 files or. WMV files via these media players, they play very well. So I think that the problem is with the export of the Movie Maker project. Also, thinking that I have perhaps incompatible video files to Windows Movie Maker, I tried just using Jpeg files with audio to create a slide show, thinking that it would work with standard Habitat. Yet once, however, that the audio is played with a project containing pictures (no video). Any ideas?

  Audio was working fine, just no photos or video showing once the project has been saved as a movie. So, I tried your solution of creating a short slide show with photos only and no luck. I uninstalled and reinstalled movie maker and still no luck. Downloaded the pack codek for windows 7 and still no luck.

  So, I decided to download the Vista windows movie maker for my OS to windows 7 and everything works like a charm. Don't know how or why, but the version of Vista is flawless on my windows 7.

  Thanks for your suggestions. I appreciate the help.

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck

• Error message - it only works with Windows Media Player for Windows XP when trying to convert playlists to Excel.

  Original title: windows media player 11 trouble conversion playlists to Excel after obtaining bonus pack.

  I downloaded the bonus pack, everything works well except the library management wizard. Comes with the message that it only works with Windows Media Player for XP only. I am currently running windows xp edition family and windows media player 11.  Help, please.

  Hello

  You can follow this link & check if the problem persists:

  How to export a playlist in Windows Media Player?

  Hope the helps of information.
  Please post back and we do know.

• Even with safe mode Windows 7 error "Windows Explorer has stopped working". Screen is blank with only the specified cursor.

  Using Win 7 Home 64 bit:
  After the connection, I get "Windows Explorer has stopped working" its InPageError says in details
  Auto check solution online does not come to the top with a solution
  the screen is black nothing happens.

  I opened in safe mode, same problem.

  the only thing I can do is ctrl/alt/del and open Task Manager. When I tried to open the new task... Task Manager stopped working

  Request of guid, how to solve this problem. The problem started last night.

  The laptop is Lenovo G550
  Operating system: Win 7 64-bit service pack 1 - home edition

  I can email a screenshot is necessary for the InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  OS Version:6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information 1:c785
  More information 2:c785ae48d9bd3e84e80fe64557c132ac
  Information additional 03:58 d 5
  More information 4:58d5c6fbf156506f476a5bd1fc86cfbf

  Hello

  This problem may be due to one of the following problems:

  • You are using an outdated or corrupted video driver
  • System files on your PC can be damaged or do not correspond with other files
  • You may have an infection of viruses or malware on your PC
  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

  Try the following steps:

  Method 1:

  Try the steps of error: Windows Explorer has stopped working

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Note:

  Ignore them perform a upgrade in Place the link above.

  Also ignore the safe mode and clean boot.

  Method 2:

  We will try to start the computer in mode low resolution and check the status of the issue.

  Low resolution starts Windows using your current video driver, and using the parameters of frequency low resolution and refresh. You can use this mode to reset your display settings.

  Refer to the section:

  Turn on the video resolution (640 × 480)

  You can also check: why is my screen black when I start Windows 7?

  Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  It will be useful.

• My mx6920 gateway upgraded to windows 7 now headphone works but no delegation cannot find the audio device

  I recently updated my mx6920 gateway for windows 7 and now, for some reason any laptop speakers will not work. The headphone jack works though. I tried to install the Audio drivers high definition on the RealTek site and was unsuccessful because windows has taught me that the driver is not the right one for the type of windows. Even when using the compatibility feature, does the same thing that I tried to use the Sigmatel drivers from the site of the bridge. These drivers ended up with the same problem. I checked Device Manager and it indicates that the audio device works. Who should ask me why do I hear audio from the headphone jack, but not the laptop speakers.

  any help you could give me would be greatly appreciated

  Thank you

  Hello

  We can refer to this article and check if that helps.

  http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3155

  You can also contact Support technique Gateway here: http://us.gateway.com/gw/en/US/content/contactus

  Thank you.

• Windows media center tuner works fine but won't display of television programs (screen black & no audio)

  Windows media center tuner works well, but won't display (screen black & no audio) of television programs.

  He has no problem display of a recorded program but will not display the digital direct terestrial TV program.

  The problem sometimes disappears and then returns, for example - this morning, after 30 minutes of game time!

  Hi Daniel,.

  Update your graphics card, but also the TV tuner card drivers. Uninstall and reinstall the graphics driver.  Once done, reconfigure Windows Media Center.

  Method 1: Try to update to the latest graphics card drivers on the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Uninstall and reinstall the driver for the graphics card from Device Manager:

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Visit the manufacturer's Web site to download and install the latest graphics driver. Once done reconfigures WMC.

  Method 3: See the article provided below and check if help.

  Set up a TV signal in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-cent

  Method 4: Uninstall and reinstall the Windows Media Center:

  Stage i: uninstall Windows Media Center:
  
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Center.
  d. restart the computer

  Stage II: Reinstall the Windows Media Center:

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Center.
  d. restart the computer.

  Let us know if you have other questions about Windows in the future.