Inclination of the points on a line

Similar Questions

• By aligning the points of a line works if a point is not selected

  I don't know if it's strange for me, but I can reproduce this every time.

  Draw a line with three points or more, such that no point is there line horizontally.

  Select all points and then use the Panel align to align items horizontally. Nothing happens for me.

  Now select all points except one and then use the Panel align to align items horizontally. Works for me.

  I would be interested to know if others are experiencing the same thing.

  Mac OS X 10.6.4

  Illustrator CS5 15.0.2

  Same thing is happening to me.

  It is done once all points are selected, the selection is considered to be a path rather than a selection of points. Illustrator is looking for a 2nd way to align itself on, and when a second path is not found it does not work.

  So if you have a way with 100 points, then align it Panel would work if you chose from 2 to 99 points. Have 1 or 100 and the Align Panel does not work.

  You can use the object > path > average. You cannot select an object key however, but alteast this will work to align all your points.

• How can I change the size of the points in a polar graph?

  Hello

  I used this link (http://digital.ni.com/public.nsf/allkb/9CEC8B2C1E67039586256DEF006F9A0E) to plot points (instead of lines) with polar track of Labview demo (see file attachment). Could someone tell me if it is possible to change the size of the dots on the ground (I wish they were bigger).

  Thank you very much

  Kind regards

  Forum_75

  The code downloaded Barros is the example provided with LabVIEW with the Subvi "Plot polar data" replaced by another which trace points instead of lines. As the article points out the example provided with LabVIEW shows how you can replace the Subvi used in the example to draw the points instead of lines. The entrance to the 'pen' to the Point 'draw' VI indicates the thickness of the points. You can wear this "Feather" entry to a Panel control before or hard wire it to a value.

• When I change the thickness (in points) of text/lines/etc by using the arrow icons the thickness of the line jumps instantly to 1000 pts. Why?

  ILLUSTRATOR - when I change the thickness (outline/stroke) (in points) of text/lines/etc by using the icons of arrow (upwards or downwards), the thickness of the line jumps instantly to 1000 pts. How can I adjust the settings to make this feature work, because I really need in many situations. Thanks in advance!

  

  

  koenk,

  The current pastor of the corrupt file bug/preferences units seems to be:

  (1) delete your preferences HERE (close HAVE and press Ctrl + Alt + Shift / Cmd + Option + shift during startup).

  (2) ensure that the parameters English (United States) system locale and the decimal point is. (dot/full stop, no, (comma) when the machine is restarted,)

  (3) launch HAVE again and see if the subject is cured.

  You can see a long discussion here:

  https://forums.Adobe.com/thread/1871389?q=units%20bug

• I'm working on a list at several levels, and when my list gets to the two figures on the third level, he pushes the first line of the text beyond the point of withdrawal.

  I played a bit with the indent and spacing in the paragraph without result style. How to get to the line upwards again after this point or just change the withdrawal of this it is so every game, no matter what number he?

  Use a withdrawal left, like 10 mm for iterated section, then set the indentation of first line to 10 mm. (or 15/15 etc., depending on how much you need. Enter a tab between the number and the text in the first line.

  If you use auto-numbering lists, then typing a tab is not necessary, but also take a look at the left indent and the parameters of the line first indent.

• Keep the angle of a line of direction as you drag a direction point

  Hello

  I have a way with an inflection point. The two branch points form a line of direction with any non-45-degree-angle - 11.8 degrees.

  I want to drag a direction point while keeping the angle of 11.8 degrees exactly.

  Is there a key combination for this (Mac OS)?

  Thanks in advance.

  I asked for this function for 20 years. Short answer: you can't extend a line. Nifty chart said FINALLY Adobe enough: Let's get some real tools in Illustrator. Their Vectorscribe plugin has an extension function that may extend to any path all right, a spiral or Bezier.

• Is it possible for a line chart display curved lines between the points?

  We have a demand interesting to build a line chart in OBIEE, where the points on the graph are connected by curved lines instead of the normal straights. The best way to describe it would be "serpentine". I saw this in a Cognos report, but I do not know if OBIEE for this. Maybe a setting in line.pcxml? Any ideas?

  Currently, we do not provide the organizational chart. Both options, you have to connect the dots in a line chart are either via a straight line or a curve of the step. A curved line would essentially be a form of a spline, with suitable smoothing algorithms.

  Rgds,
  Afonso
  BI product management

• CS5: How to delete all points of the width of a line?

  The width tool is cool, but how do I get rid of all the points that I created if I don't like them? I know that I can remove them with shift-click, but there is a lot of work and I'm not really sure that I receive all. Is there an all clear somewhere?

  Select the path and open the cover of the race. Looking for a drop-down list at the bottom marked profile. On this basis, select uniform.

  The same setting is available on the control panel and in the stroke settings in the appearance Panel.

• Qosmio G30-137 - video card problem - the bug of vertical lines

  Hi members,

  Today my Qosmio G30-137 started to make trouble showing vertical lines that look like this:

  ''''' ''''''' '''''' '''''''
  '''' ''''''' '''''' '''''''

  After having used the product Windows disk recovery could not start early and came up with a blue screen with the error code:

  + failure of page in the nonpaged area STOP 0 x 00000050 (0xC09C3044, 0x00000000, 0X804DA90AA, 0 X 000000002) +.

  Basically, this indicates that the RAM - memory Cache L2 or preserved is dead. But I also learned that the graphics card can be smoked.

  After the blue screen, you will not get the system to normal operation, no matter what you try.

  I strongly advise to check if your Qosmio is under warranty and see your reseller for Exchange. Fortunately I bought mine 2006/06/06 so its still under warranty (even if only a left view days).

  Additional information: another Member of this forum has had a similar problem and noted that the entire motherboard must be changed causing costs of USD 700.00 and more!

  I will let you know what I found myself with.

  BRgds
  The Q

  Unfortunately, this sounds like a serious problem of material as other members suggested, the GPU (graphics card) may be defective and therefore replacement is necessary.

  The point is that the GPU is soldered on the motherboard and it of not possible to remove the graphics chip of the card. In most cases, the entire motherboard must be replaced to solve graphic problems.

  In my opinion, you should contact your ASP as soon as possible.
  Technicians should be able to help you to explain the situation and to issue and ask for later handling.

  Good luck buddy

• How to disable the charms to the point bar Windows 8.1

  I have a new HP laptop with Windows 8.1. I HATE the charms bar. It is very annoying. I have disabled the function of the angle of the bar charms appears is more that if I drag the edges of the corner, however, it pop again randomly. I'll be typing along and it will just pop up, blocking everything I am.

  I have absolutely no need of this bar of charms. In fact, the only thing that I used it for is to get to the option to disable them. However, on this laptop, which is not completely disable them... I tried to go to control panel mouse to turn them off, but this option is not available. However, I don't think it's the mouse pad, forcing them to pop up even when... I'll be typing along, not even touch the carpet of mouse, and all of a sudden they're going to pop up.

  What is the cause of this and how can I get rid of him? I'm getting rather desperate and sometimes feel compelled to throw this laptop out the window! I prefer my laptop HP Windows XP and has replaced only because XP is no longer supported... 8.1 window is one of the most frustrating systems, with that Microsoft has developed.

  Please help me turn off these dang for good things!

  UPDATE: I think I found the solution. I received this link a Microsoft Chat line employee. I followed the instructions and the charms seem to have disappeared... YAHOO...

  Here is the link:

  http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-Windows-8/

  UDATE UPDATE: lol... I posted this below, but repost here... The solution given by the employee of Microsoft Chat line did not work... Well, it worked for a day, I arrested him for the night, and when I turned it on in the morning, the charms were back with a vengeance... Seriously, worse than ever, jumping constantly.  It was as if they were really angry...

  I went to Wally World and bought a $ 16 wireless mouse, which keeps the charm in the Bay... In fact, I think it's easier to use than the mousepad on my laptop anyway. I can use it on the arm of my chair on my laptop beside this mousepad, on a desktop (obviously), but the point being, unless I run the cursor at the very far right of my screen, the charms are hid...

  I have a business Web site, and all working on it, the charms have been constantly popping up as I tried to add images and descriptions. He took me seriously out of my mind... Everything took me twice as long to add, I don't waste time... I worked on it this morning using the wireless mouse and the charms bar jumped not once...

  Thank you Paul, but this link just tells me to do what I've already tried... When I tried to get responses on the Microsoft Windows site, it says that all laptops are different, and I would need to go the manufacturer of my laptop to tell me how to disable... So, I'm here, but nobody seems to know how to stop these things pretty darn... It is really ruining my experience with my new laptop... It's like the use of a laptop being shared with another person who constantly interrupts what I do...

  OPPS... while I was writing that I expect a person on the microsoft online chat to connect so I could ask them how to disable the...

  Rachel from Microsoft came... She sent me this link:

  http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-Windows-8/

  I did what it said to do, and I'm typing this, no charms have jumped at me... Maybe it solves the problem (hope, hope).

• How to find the point of leakage with Labview?

  I use a myRIO to develop a system to help people imapaired in their navigation to visually. I already have the image processing of which is to be acquired by the device (edge detection and research of straight lines).

  How can I end the vanishing point of the two edges of a path to an image with LabVIEW? There is a special function that I can use?

  Thank you!

  The vanishing point is the intersection of two lines, no?

  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=intersect%20point%20Of%...

• The search in a table 2d-coordinates for the point of click

  I'm doing a VI that creates a layer of 2d points on an image imported (as pictured). These points are generated by a Subvi, which simply draws points over and over again (based on the 3 selections of initial angle). All the coordinates of the points are stored in a data feed that is sent to a registry change for other future functions. Each coordinate corresponds to an electrode, labeled 0-255, goes into the lines first (although that could change, but I guess it would be easy to change). Labels are created through 2 loops (as seen in diagram 1).

  I would now like to click on a particular point and put it out in a different color, but also an indicator show me what electrode I clicked. I seem to be at a loss on how to do it! I need explore a table 2d-2 groups of the element, where she looks for the line first, then the corresponding column (or vice versa, it is not serious, but just for ease of understanding, let's say she is looking X first, where the columns first) and compare them to 2 elements (the mouse click coordinates).

  Here's what I've done so far. I need to search for the function in the following way; If find X, look no further columns and select that particular column where the X was found and begins to look for the values Y and and then stops when the value of Y is. Once the two values are found, take these out of the loops and throw them in a cluster and the function of drawing lots.

  Thank you!

  p.s. in case anyone is wondering why I have the function "in the range" in there, it's so that the user does not have to be exact pixel this allows the user to click within 2 pixels of the coordinate of the point.

  Hi Daniel!

  What do you think of this approach?

  

  We subtract just the mouse coordinates in the coordinated range 2D (Array stores the coordinates of the points on the image), the absolute value and look for the minimum. X and y the selected point index is returned in minutes or the index. You can replicate the fuction "in range" by ensuring min value is not too high.

  With regard to:

  Andrew Valko

  NOR Hungary

• Problem with PPR in a table advanced with the insertion of several lines in create the page using 'add a new button '.

  Hello experts,

  I created a page that contains an array of advanced, 6-7fields (including a poplist column)

  Whenever I have add a new using the line add new line button, I get a null pointer exception.

  Code in Scenario1.

  
  

  Public Sub handleCurrencyChangeEvent()

  {

  PVO OAViewObject = (OAViewObject) findViewObject ("xxCurrencyPVO1");

  Line OARow = (OARow) pvo.first ();

  OAViewObject dtlVO = (OAViewObject) findViewObject ("xxEcreditCardDtlVO1");

  OARow dtlRow = (OARow) dtlVO.getCurrentRow ();

  String currency = (String) dtlRow.getAttribute ("CurrencyCode");    / / NULL POINTER EXCEPTION

  If ((currency == null) |) ("AED".equals (currency)))

  {

  row.setAttribute ("ExchangeRateTypeRender", Boolean.FALSE);

  row.setAttribute ("ExchangeRateDateRender", Boolean.FALSE);

  row.setAttribute ("ExchangeRateRender", Boolean.FALSE);

  }

  on the other

  {

  row.setAttribute ("ExchangeRateTypeRender", Boolean.TRUE);

  row.setAttribute ("ExchangeRateDateRender", Boolean.TRUE);

  row.setAttribute ("ExchangeRateRender", Boolean.TRUE);

  }

  }

  Public Sub initPVO()

  {

  OAViewObject appPropsVO = (OAViewObject) findViewObject ("xxCurrencyPVO1");

  If (appPropsVO! = null)

  {

  If (appPropsVO.getFetchedRowCount () == 0)

  {

  appPropsVO.setMaxFetchSize (0);

  appPropsVO.executeQuery ();

  appPropsVO.insertRow (appPropsVO.createRow ());

  Line OARow = (OARow) appPropsVO.first ();

  row.setAttribute ("RowKey", new Number (1));

  }

  }

  handleCurrencyChangeEvent();    / / If I comment on this call, there will be no null pointer when I click on the button Add a new rank and PPR will not be the first line when I select the poplist.                 

  }

  Public Sub createDetailRow()

  {

  String hdrId;

  OAViewObject hdrvo1 = (OAViewObject) getxxEcreditCardHdrVO1 ();

  OAViewObject dtlvo = (OAViewObject) getxxEcreditCardDtlVO1 ();

  Initialize and create a line of VO

  If (! dtlvo.isPreparedForExecution ())

  {

  dtlvo.setMaxFetchSize (0);

  dtlvo.executeQuery ();

  }

  Line dtlrow = dtlvo.createRow ();

  dtlvo.executeQuery ();

  int count = dtlvo.getRowCount ();

  dtlvo.insertRowAtRangeIndex (count, dtlrow);

  Development of the sequence for the number of request *.

  Number of dtlseq = getOADBTransaction () .getSequenceValue ("xxdm. XXDMI_ECREDIT_CARD_DTL_SEQ");

  hdrId = hdrvo1.getCurrentRow ().getAttribute("CreditCardHdrId").toString (); mind vo

  dtlrow.setAttribute ("CreditCardHdrId", hdrId);

  dtlrow.setAttribute ("CreditCardLineId", dtlseq);

  dtlrow.setAttribute ("LineNumber", count + 1);

  End of sequence generation *.

  dtlrow.setAttribute ("CurrencyCode", "AED");

  String currency = (String) dtlrow.getAttribute ("CurrencyCode");

  System.out.println ("CurrencyCode:" + currency);

  dtlrow.setNewRowState (Row.STATUS_INITIALIZED);

  } / / end createDetailRow()

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  Event string = pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM);

  * Treatment add line button *.

  If ((ADD_ROWS_EVENT. Equals (Event)) & & "AdvTblRN".equals (pageContext.getParameter ("source"))) ".

  {

  am.invokeMethod ("createDetailRow", null);

  am.invokeMethod ("initPVO");

  } //**End add row button *.

  otherwise if

  ("currCodeChangeEvent".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))

  {

  am.invokeMethod ("handleCurrencyChangeEvent");

  }

  ===========================================================================================================================

  Could please help what is wrong in the code, I followed all the steps as stated in the guide, but the table advance, the problem starts whenever I click on the button Add a new row for the creation of new line.

  I couldn't understand what was wrong with the code.

  Thanks in advance,

  Suman

  Suman,

  A few points:

  1. Why do you call handleCurrencyChangeEvent in the event to add a line? Simply set the useful, likely of the values in the line it himself.

  ex:-instead of calling the handleCurrenyChange method, simply add the below lines inside the createDetailRow()

  dtlrow.setAttribute ("ExchangeRateTypeRender", Boolean.FALSE);

  dtlrow.setAttribute ("ExchangeRateDateRender", Boolean.FALSE);

  dtlrow.setAttribute ("ExchangeRateRender", Boolean.FALSE);

  2. it looks like you have on the field of the currency and that fireAction handleCurrencyChangeEvent action method is called, right?

  Instead of using dtlVo.getCurrentRow, use the code below:

  public void handleCurrencyChangeEvent(String eventRowSourceParam)
    {
    OAViewObject pvo = (OAViewObject)findViewObject("xxCurrencyPVO1");
    OARow row = (OARow)pvo.first();
  
    OAViewObject dtlVO = (OAViewObject)findViewObject("xxEcreditCardDtlVO1");
  
    //OARow dtlRow = (OARow)dtlVO.getCurrentRow();
    OARow dtlRow = (OARow)this.findRowByRef(eventRowSourceParam);
  
    String  currency = (String)dtlRow.getAttribute("CurrencyCode");    // NULL POINTER EXCEPTION
  
    if ((currency == null) || ("AED".equals(currency)))
    {
    row.setAttribute("ExchangeRateTypeRender", Boolean.FALSE);
    row.setAttribute("ExchangeRateDateRender", Boolean.FALSE);
    row.setAttribute("ExchangeRateRender", Boolean.FALSE);
    }
    else
    {
    row.setAttribute("ExchangeRateTypeRender", Boolean.TRUE);
    row.setAttribute("ExchangeRateDateRender", Boolean.TRUE);
    row.setAttribute("ExchangeRateRender", Boolean.TRUE);
    }
    }
  

  In the controller:

  if((ADD_ROWS_EVENT.equals(event)) && "AdvTblRN".equals(pageContext.getParameter("source")) )
  {
    am.invokeMethod("createDetailRow",null);
    am.invokeMethod("initPVO");
  } //**End Add Row Button**
  else if ("currCodeChangeEvent".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
  {
    String eventRowSourceParam = pageContext.getParameter(EVENT_SOURCE_ROW_REFERENCE);
    Serializable[] params = {eventRowSourceParam};
      Class[] paramTypes    = {String.class};
    am.invokeMethod("handleCurrencyChangeEvent",params, paramTypes);
  }
  

  3. Why do you call initPVO when it is clicked on the Add line? Are you calling not just in the PR?

  You could call it once in the PR and let. When you call it PR, you may need to remove the handleCurrencyChangeEvent of this method call.

  See you soon

  AJ

• customization of the form - sales order lines

  Hi all

  My requirement is to do a column not used as barcode field, during the seizure of the sales order lines, so that the user enters the bar code. The point corresponding system, description code must do this by default.

  The link between the barcode and the article is available & captured the FDF - attribute1 to the master of the order of the day.

  I used columns customer number as bar code and populated the value of the element using the customization of the form. But in the normal client command line all by choosing the item UOM is filled in automatically and by entering the quantity, the price will fill. This is not the case in my case.

  Property:

  Object type: agenda

  Target the object: LINE. ORDERED_ITEM_DSP

  Property name: VALUE

  Value: = sΘlectionner segment1

  of mtl_system_items_b

  where attribut1 = "| ${point. LINE. CUSTOMER_LINE_NUMBER.value} | "

  AND organization_id = "| ${point. LINE. SHIP_FROM_ORG_ID.value} | "

  Thank you and best regards,

  Max

  In OM responsibility, go to components-> cross reference, create a new Cross Reference Type of barcode.

  Click the Assign button.  Add an element and in the value column, put your code bar.  For bar codes, leave the 'Applicable to all associations' checked.

  Now go to the screen and control in the field of the ordered item, type the barcode value that you set up.

  Using tools folder on the command line, you can expose 'Internal Article' and 'Type of item identifier' to see that the type is 'Barcode' and it is mapped correctly your internal inventory item.

  Most of the documents will show the ordinate the question - if all your documents will also show the value of code barcode for this command.

  Here is an article with some screenshots: Johan Louwers Personal Blog "my view on the world".: Oracle EBS cross references

• See 'new view '... What's the point? I want a close up and a full view of my work

  I thought that the view/new view menu point would give me a 2nd window to zoom in for example of my work, so I can work closely in a part and see the results from the point of view zoomed on at the same time I have to draw... but it seems to only be able to exchange between new View1 and standard display one at a time.

  I tried to use the browser to give me a small zoom view, but with 3 cards of art in the browser window, it's all a bit too small even when you maximize browser, work plans and the work remain the same size. would be good to set your own zoom level in the navigator so view or switch between the standard display and your own custom view, then it can be used as a window to display the greatest work in regards to the lines you draw in a larger portion, I have this would be very useful for the work of character design.

  Try window > new window