including return transport with the XML data in the table

Similar Questions

• When I burn CD for my use on the computer, sometimes the order of the songs are returned, starting with the last song first.

  * Original title: Windows Media player

  When I burn CD for my use on the computer, sometimes the order of the songs are returned, starting with the last song first.  This is the CD, or I do something wrong?  This isn't an ongoing problem... most of the time it's ok.  Can I change the order manually. If Yes, where and how.

  Thank you

  Lee

  Lee - there are a number of possibilities. First of all, it depends whether you burn audio disks or data - if they are audio discs, you can check and rearrange the order of songs in the burn list - if necessary - before you start burning. If you drag multiple files to the burn list quite often the last track you clicked on will go upward, so I wonder if it is what can happen. Back with a little more detail if I not quite correctly interpreted the problem. Best regards, Ric.

• my audio syestem of beats went when I choose windows 8, how can I return it with the full version?

  my audio syestem of beats went when I choose windows 8, how can I return it with the full version? I have hp pavilion dv4 5110tx

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59882.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Then, download and reinstall the Chipset driver on the following link.

  Chipset Driver - Windows 8.

  After reinstalling, restart the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again before checking if the Beats Audio is now listed in the windows control panel.

  Kind regards

  DP - K

• How to write a query to return rows with the varchar column that contains even a single occurrence of the characters, such as Ÿ and

  How to write a query to return rows with the varchar column that contains even a single occurrence of the characters, such as Ÿ and

  I have a table whose columns with values such as

  MINNEAŸPOLIS and ¿VV ¿A

  Only the characters that are allowed in this column are alphabets, numbers, spaces, points and supports.

  Please help to write a SQL SELECT with Regexp_like query or any other option.

  Thanks to you all! Under query worked for me. Thank you Frank to explain the concept of hooks inside regexp_like.

  SELECT * FROM testspecial, WHERE REGEXP_LIKE (sampletext, "[^] ^ A - Z ^ a - z ^ 0-9 ^ [^.]") ^ {^} ^]') ;

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• CVI suggested help update on 'programming with the Table controls.

  Hello

  May I suggest adding a sentence to the chapter 'Programming with the Table controls', 'Creation and deletion of cells' section help of CVI.

  After the sentence "use the following functions to control the number of rows in a table control...". "I would like to add a suspicion that the number of lines is also affected by (programmatically) adjustment of the height of the table.

  Now that I've discovered, it's obvious ;-)

  Hi Wolfgang,.

  I think you might be misunderstanding this sentence in aid. It does not refer to the size of the table, in regard to the number of lines go in the table. It is in fact the number of real lines exist in the table. And the total number of rows in the table is absolutely not affected by the height of the table.

  Luis

• Problem with the Table result variable

  When you save a document structured in XML, the Table Continuation variable is translated to an entity named "fm.tcont".

  Strangely, the content of the entity is a control character (0 x 11). The file is saved in XML format, but the Analyzer Returns an error,

  Error message to the file d:\test\100219\doc_test.xml.1F0, line 31, char 22,: Invalid character (Unicode: 0 x 11)
  Error on line 31, tank 24, Message: expected a value of literal entity or PUBLIC/SYSTEM identifier
  Parse error on line 31, tank 20: not well formed (invalid token)
  The abandoned analysis.

  The contents of the variable nothing suspicious, it's just '(continued)', where the first character is a normal space.

  If someone had the same problem and knows how to fix?

  It's on FM8.0p277 on Windows XP.

  Thank you very much in advance,

  Johannes

  Johannes,

  I don't have the direct response, because I've never tried. But my EDD has a TableContinuation element that is empty; ESD inserts the table continuation variable. When you export to XML, the element is there as a "marker"; It has NO content. When open in the frame, ESD inserts the variable again. My reasoning is that the table continuation variable has meaning ONLY within FrameMaker. It's a formatting object, not a content container. No post processing of the XML data would not need if so, ITS engine could provide what it is able to understand.

  Anyway, here's how I deal with it.

  Good luck
  Van

• Need help in generating XML data to a table in XML format

  Hi all
  
  I need help to generate an xml file using the data below.
  
  The table name is T_Data have 4 columns as shown below with data.
  
  Neighbourhood region Division
  ---------- ----------------------- ----------- -----------
  Northwest Northern California San Jose SJStore1
  Northwest Northern California San Jose SJStore2
  Northwest North of California to the North of THE LAStore1
  Northwest North of California to the North of THE LAStore2
  Northwest North of California to the North of THE LAStore3
  
  I want to generate an XML file using SQL/XML functions and the XML file should look like as below.
  
  <>region
  < name of region > Northwest < / name of the region >
  < Division >
  Northern California < division name > < / Division name >
  District of <>
  SanJose < district name > < / District name >
  <>store
  < store name > SJStore1 < / name >
  < store name > SJStore2 < / name >
  < / store >
  < / district >
  < / division >
  < / region >
  
  Very much appreciate your help here.
  
  Thank you.

  I tried to group the lines, but they did not then provide a correct output.

  To unflatten dataset, we can use nested GROUP-BY subqueries.

  The following will produce a line by region.
  If all regions must be grouped in a single root element (does not so appear according to the directives of the sample), we just add an another XMLAgg.

  SQL> with sample_data as
    2  (
    3    select 'Northwest' reg, 'Northern California' div, 'San Jose' district, 'SJStore1' st from dual union all
    4    select 'Northwest' reg, 'Northern California' div, 'San Jose' district, 'SJStore2' st from dual union all
    5    select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore1' st from dual union all
    6    select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore2' st from dual union all
    7    select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore3' st from dual
    8  )
    9  select reg
   10       , xmlserialize(document
   11           xmlelement("Region"
   12           , xmlelement("RegionName", reg)
   13           , xmlagg( division_xml )
   14           )
   15           indent -- for display purpose
   16         ) as region_xml
   17  from (
   18      select reg
   19           , xmlelement("Division"
   20             , xmlelement("DivisionName", div)
   21             , xmlagg( district_xml )
   22             ) as division_xml
   23      from (
   24          select reg
   25               , div
   26               , xmlelement("District"
   27                 , xmlelement("DistrictName", district)
   28                 , xmlelement("Store"
   29                   , xmlagg(
   30                       xmlelement("StoreName", st)
   31                     )
   32                   )
   33                 ) as district_xml
   34          from sample_data
   35          group by reg
   36                 , div
   37                 , district
   38      )
   39      group by reg, div
   40  )
   41  group by reg ;
  
  REG       REGION_XML
  --------- --------------------------------------------------------------------------------
  Northwest 
              Northwest
              
                Northern California
                
                  North LA
                  
                    LAStore1
                    LAStore3
                    LAStore2
                  
                
                
                  San Jose
                  
                    SJStore1
                    SJStore2
                  
                
              
            
   
  

• Value set with the table type

  Hi all
  I use R12.1.3 EBS. I want to create a value set with the posting type "Table". But I must specify what application will be set and the table to use. I want to refer to an another diet/no apps. Is this possible? I have the link of database between this regime to receivables / via SQL Developer, I'm able to query or manipulate the data.
  
  

  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
  PL/SQL Release 11.1.0.7.0 - Production
  "CORE     11.1.0.7.0     Production"
  TNS for Linux: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  Thanks in advance,
  Bahchevanov.

  Create a custom view in the schema of APPS that points to the table in the remote database, and you should be able to create a validated set of values from table based on the custom view. This will require you to create a link of database on the remote database (or a private database link in the APPS schema)

  HTH
  Srini

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• Error when try to use the rowid with the table alias

  I tried using a table alias to test the functions of Manager of rules and met the following problems.
  
  1. I have clone from a schema HR employees and departments tables.
  
  2. create data as follows:
  
  BEGIN
  dbms_rlmgr.create_event_struct (data = > 't_a');
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_employees"
  tab_alias = > exf$ table_alias ('employees'));
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_departments"
  tab_alias = > exf$ table_alias ('departments'));
  END;
  
  3. create the class rule as follows:
  
  BEGIN
  dbms_rlmgr.create_rule_class (rule_class = > 't_as',)
  Event_Struct = > 't_a. "
  action_cbk = > 't_acb ',.
  rslt_viewnm = > 't_arv');
  END;
  
  4. After adding a rule to the rule class, I try to test as follows
  
  DECLARE
  r_emp ROWID.
  r_dept ROWID.
  CURSOR a_cur IS
  SELECT emp. ROWID, Dept. ROWID
  Employees OF ministries dept (IEM),
  WHERE emp.department_id = dept.department_id;
  I have NUMBER: = 1;
  BEGIN
  OPEN a_cur;
  LOOP
  EXTRACTION a_cur
  IN r_emp, r_dept;
  EXIT WHEN a_cur % NOTFOUND;
  dbms_output.put_line (i);
  i: = i + 1;
  dbms_output.put_line (r_emp);
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_emp,
  event_type = > 'employees');
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_dept,
  event_type = > "departments");
  END LOOP;
  END;
  
  But I got the following error
  
  SQL > DECLARE
  2 r_emp ROWID.
  3 r_dept ROWID.
  4 a_cur CURSOR IS
  5. SELECT emp. ROWID, Dept. ROWID
  6 employees OF ministries dept (IEM),
  7 WHERE emp.department_id = dept.department_id;
  8 I COMP: = 1;
  BEGIN 9
  10 a_cur OPEN;
  11 LOOP
  12 FETCH a_cur
  13. IN r_emp, r_dept;
  EXIT 14 WHEN a_cur % NOTFOUND;
  15 dbms_output.put_line (i);
  16 I: = i + 1;
  17 dbms_output.put_line (r_emp);
  18 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  19 event_inst = > r_emp,
  20 event_type = > 'employees');
  21 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  22 event_inst = > r_dept,
  23 event_type = > "departments");
  24 END LOOP;
  25 END;
  26.
  DECLARE
  *
  ERROR on line 1:
  ORA-06550: line 1, column 36:
  PLS-00201: identifier 'AAAVN9AAEAAAQH8AAA' must be declared.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  ORA-06512: at "EXFSYS. DBMS_RLMGR', line 974
  ORA-06512: at line 18 level

  Hello

  ROWID for individual tables can be added as events only if the rule class is set up as a Composite. For all other cases, ROWID is treated as data and they need to be formatted as a string of instances of AnyData or name-value pairs. Your script is to think that you intend to create a composite rule class while you might add ROWID individually. If please, recreate the rule as a composite class and try again. The error message you received is incorrect and has been corrected to indicate that the error is with the format data point past.

  Hope this helps,
  -Aravind.

• How to create a grid with the tables and Boolean values?

  As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

  It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

  I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

  I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

  Any help is much appreciated. Thank you!

  Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

  What you see on the Panel is only a view and has nothing to do with what is in the table.

  Lynn

• Can someone help me with the table layout please

  www.hunterstables.co.UK/pricelist1.html

  I am trying to create a table with an ordered list in my table.

  I have three rows and three columns. The first is my 'specifications' title that is correct.  The second row, I would like to have the titles of the product in bold, but as in the 'td' If make sure that "BOLD" then all the text will be "BOLD".

  My third row, trying to get my products in a list, so IE

  3 X 2 CLS TANALISED FRAMING

  4 X 2 TANALISED PERLINS TANALISED

  FINISHES of RABBETS of T & G 16MM, 12MM

  PROFILE BOX GALVANIZED STEEL ROOF

  2PI OVERLOOK STANDARD WITH SHED ROOF

  Can someone please!

  Thank you in advance.

  Copy and paste the css code and table:

  SPECIFICATIONS
  BUDGET 16mm T & G rabbets, ends 12mm (treated)	STANDARD 19mm T & G rabbets, finishes 15mm (treated)	PREMIUM 22mm T & G rabbets, ends 19mm (treated)
  3 x 2 CLS Tanalised framing 4 x 2 Tanalised Perlins Tanalised 16mm T & G rabbets, ends 12mm 2 pi in standard with shed roof overhang	3 x 2 CLS Tanalised framing 4 x 2 Tanalised Perlins Tanalised 16mm T & G rabbets, ends 12mm 2 pi in standard with shed roof overhang	3 x 2 CLS Tanalised framing 4 x 2 Tanalised Perlins Tanalised 16mm T & G rabbets, ends 12mm 2 pi in standard with shed roof overhang

• SQL with the Table using nested

  Hello

  Please help how to do that thing

  I have a nested table of object type

  create or replace type a1 as an object

  (

  a number,

  b varchar2 (30),

  VARCHAR2 (30) region

  );

  create table a1 type a1_array s;

  declare

  v_a1 a1;

  v_a1_array a1_array:=a1_array();

  Start

  v_a1 = a1 (1, '1', 'AUS');

  v_a1_array. EXTEND;

  v_a1_array (1): = v_a1;

  v_a1 = a1 (2, '2', 'AUS');

  v_a1_array. EXTEND;

  v_a1_array (2): = v_a1;

  v_a1 = a1 (3, '3', 'NAM');

  v_a1_array. EXTEND;

  v_a1_array (3): = v_a1;

  end;

  Now, I v_a1_array have 3 row 2 with region AUS and the other with NAM region.

  SQL help can I get lines only "AUS" and look in the TABLE OF TYPE v_a1_array (using Where clause and functions (Table))

  Any help will be much appreciated. Please help. I have Oracle 11g

  Thank you

  I hope that you are looking for this.

  pretend like your excel temp (with clause)

  v_a2 - is a type of a1_array

  SQL > select * from v version $;

  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production

  SQL > DROP TYPE a1_array;

  Type fell.

  SQL > DROP TYPE a1;

  Type fell.

  SQL > CREATE or REPLACE TYPE a1 AS OBJECT
  2 (a NUMBER, b VARCHAR2 (30), region VARCHAR2 (30));
  3.

  Type of creation.

  SQL > CREATE TYPE a1_array IS TABLE of a1;
  2.

  Type of creation.

  SQL > DECLARE
  v_a1 2 a1_array;
  3 v_a2 a1_array;
  4 BEGIN
  5 WITH temp
  6 AS (SELECT 1 a, 1 b, "AUS" AS region FROM DUAL
  7 UNION ALL
  8. SELECT 2 AS a, 2 b, "AUS" AS region FROM DUAL
  9 UNION ALL
  10. SELECT 3 a, b '3', 'NAM' AS region OF DOUBLE)
  11. SELECT a1 (x.a, x.b, x.region)
  In BULK 12 COLLECT IN v_a1
  Temp 13 x;
  14
  15 SELECT a1 (x.a, x.b, x.region)
  In BULK 16 COLLECT IN v_a2
  TABLE (v_a1) 17 x
  18 WHERE x.region = 'NAM ';
  19
  20
  21 FOR I IN 1... v_a2. COUNTY
  22 LOOP
  (23) DBMS_OUTPUT.put_line
  24 v_a2 (i) .a | '-' || v_a2 (i) .b | '-' || v_a2 (i) .region);
  25 END OF LOOP;
  26 END;
  27.
  3-3-NAM

  PL/SQL procedure successfully completed.

  SQL > spool off;

• Create the stored procedure with the table from another throw diagram PLS-00201

  Oracle 10g. I'm new on procedures, so maybe I'm missing something obvious.

  The ABC schema owner has table T2001_WRITEOFF. The SYSDBAs given SIUD Some_Update_Role and granted this role to developer user IJK. IJK user then created a private synonym T2001_WRITEOFF for ABC. T2001_WRITEOFF. It worked with the usual SQL DML commands.

  When I try to create a simple procedure, it throws PLS-00201 identifier "T2001_WRITEOFF" must be declared and the points of the 2nd line.

  create or replace procedure woof1(
  fooname in T2001_WRITEOFF.territory%TYPE,  <=== error points here
  bardesc IN T2001_WRITEOFF.ind_batch_submit%TYPE) IS
BEGIN
   INSERT into T2001_WRITEOFF
   VALUES ( fooname, bardesc);
END woof1;
/

  
  

  What I am doing wrong?

  
  

  Thank you

  JimR

  
  

  Grant the necessary rights directly to the user (not through a role):

  http://asktom.Oracle.com/pls/asktom/asktom.download_file?p_file=6551289900368934430